SM16LC05C-LF [PROTEC]

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-16;
SM16LC05C-LF
型号: SM16LC05C-LF
厂家: PROTEK DEVICES    PROTEK DEVICES
描述:

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-16

文件: 总9页 (文件大小:930K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
500 WATT MULTIꢀLINE LOW CAPACITANCE TVS ARRAY  
DESCRIPTION  
The SM16LCxx and SM16LCxxC Series are low capacitance mulꢀ-line transient voltage suppressor arrays that provides  
board level protecꢀon for standard TTL and MOS bus line applicaꢀons against the damaging effects of ESD, terꢀary  
lightning and switching transients.  
This series has a peak pulse power raꢀng of 500 Waꢁs for an 8/20µs waveshape. This device series meets the IEC  
61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.  
SOꢀ16 PACꢁAGE  
FEATURES  
APPLICATIONS  
• Wireless Communicaꢀon Circuits  
• RS-422, RS-432 & RS-485  
• Low Voltage ASICs  
• Compaꢀble with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV  
• Compaꢀble with IEC 61000-4-4 (EFT): 40A - 5/50ns  
• Compaꢀble with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-  
Gnd) & Level 2(Line-Line)  
• Ethernet Interfaces  
• 500 Waꢁs Peak Pulse Power per Line (tp = 8/20µs)  
• Unidirecꢀonal and Bidirecꢀonal Configuraꢀons  
• ESD Protecꢀon > 25 kilovolts  
MEChANICAL ChARACTERISTICS  
• Available in Mulꢀple Voltages Ranging from 3.3V to 36V  
• Protects up to 8 Lines  
• Low Capacitance: 15pF  
• RoHS Compliant  
• REACH Compliant  
• Molded JEDEC SO-16 Package  
• Approximate Weight: 0.15 grams  
• Lead-Free Pure-Tin Plaꢀng (Annealed)  
• Solder Reflow Temperature:  
Pure-Tin - Sn, 100: 260-270°C  
• 16mm Tape and Reel Per EIA Standard 481  
• Flammability Raꢀng UL 94V-0  
PIN CONFIGURATIONS  
16  
15  
14  
13  
12  
11  
10  
9
1
2
3
4
5
6
7
8
9
UNIDIRECTIONAL  
16  
15  
14  
13  
12  
11  
10  
1
2
3
4
5
6
7
8
BIDIRECTIONAL  
www.protekdevices.com  
05051.R15 3/13  
Page 1  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE ChARACTERISTICS  
MAXIMUM RATINGS @ 25°C Unless Otꢂerwise Specified  
PARAMETER  
SYMBOL  
VALUE  
-55 to 150  
-55 to 150  
500  
UNITS  
°C  
Operaꢀng Temperature  
Storage Temperature  
TL  
TSTG  
PPP  
VF  
°C  
Peak Pulse Power (tp = 8/20µs) - See Figure 1  
Forward Voltage @ 50mA, 300µs - Square Wave (See Note 1)  
Soldering Temperature for 10 seconds  
Waꢁs  
Volts  
°C  
1.5  
TII  
260  
NOTES  
1. Only applies to unidirecꢀonal devices.  
ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless Otꢂerwise Specified  
PART  
NUMBER  
(Note 1)  
RATED  
STANDꢀOFF  
VOLTAGE  
MINIMUM  
BREAꢁDOWN  
VOLTAGE  
MAXIMUM  
CLAMPING  
VOLTAGE  
(Fig. 2)  
MAXIMUM  
CLAMPING  
VOLTAGE  
(Fig. 2)  
MAXIMUM  
LEAꢁAGE  
CURRENT  
MAXIMUM  
CAPACITANCE  
TEMPERATURE  
COEFFICIENT  
OF VꢄBRꢅ  
ꢃ1mA  
VꢄBRꢅ  
VOLTS  
ꢃIP = 1A  
VC  
VOLTS  
ꢃVWM  
ID  
µA  
ꢃ0V, 1Mhz  
VWM  
VOLTS  
ꢃ 8/20µs  
VC ꢃ IPP  
C
pF  
qV(BR)  
mV/°C  
SM16LC03  
SM16LC03C  
SM16LC05  
SM16LC05C  
SM16LC08  
SM16LC08C  
SM16LC12  
SM16LC12C  
SM16LC15  
SM16LC15C  
SM16LC24  
SM16LC24C  
SM16LC36  
SM16LC36C  
3.3  
3.3  
4.5  
4.5  
7.0  
7.0  
20.0V @ 35A  
20.0V @ 35A  
24.0V @ 42A  
24.0V @ 42A  
26.0V @ 30A  
26.0V @ 30A  
33.0V @ 21A  
33.0V @ 21A  
39.0V @ 15A  
39.0V @ 15A  
57.0V @ 10A  
57.0V @ 10A  
72.0V @ 7A  
72.0V @ 7A  
125  
125  
20  
20  
10  
10  
2
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
15  
-3  
-3  
3
5.0  
6.0  
9.8  
5.0  
6.0  
9.8  
3
8.0  
8.5  
13.4  
13.4  
19.0  
19.0  
25.5  
25.5  
40.0  
40.0  
53.0  
53.0  
9
8.0  
8.5  
9
12.0  
12.0  
15.0  
15.0  
24.0  
24.0  
36.0  
36.0  
13.3  
13.3  
16.7  
16.7  
26.7  
26.7  
40.0  
40.0  
16  
16  
17  
17  
26  
26  
36  
36  
2
2
2
2
2
2
2
NOTES  
1. Part numbers with a “C” suffix are bidirecꢀonal devices, i.e., SM16LC05C.  
www.protekdevices.com  
05051.R15 3/13  
Page 2  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE ChARACTERISTICS  
FIGURE 1  
PEAꢁ PULSE POWER VS PULSE TIME  
10,000  
1,000  
500W, 8/20µs Waveform  
100  
10  
0.1  
1
10  
100  
1,000  
10,000  
td - Pulse Duraꢆon - µs  
FIGURE 2  
PULSE WAVE FORM  
FIGURE 3  
POWER DERATING CURVE  
120  
100  
TEST  
Peak Pulse Power  
8/20µs  
tf  
Peak Value IPP  
WAVEFORM  
PARAMETERS  
tf = 8µs  
100  
80  
80  
60  
td = 20µs  
e-t  
60  
40  
20  
40  
td = t/(IPP/2)  
20  
0
Average Power  
0
0
0
5
10  
15  
20  
25  
30  
25  
50  
75 100 125  
150  
t - Time - µs  
TA - Ambient Temperature - °C  
www.protekdevices.com  
05051.R15 3/13  
Page 3  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE ChARACTERISTICS  
FIGURE 4  
OVERShOOT & CLAMPING VOLTAGE FOR SM16LC05  
40  
30  
20  
10  
0
ESD Test Pulse - 25 kilovolt, 1/30ns (Wavesꢂape)  
FIGURE 5  
INSERTION LOSS ꢀ SM16LC12  
FIGURE 5  
RETURN LOSS ꢀ SM16LC12  
20  
Ref 0  
-20  
20  
Ref 0  
-20  
-50  
-50  
100 Mhz per Division  
100 Mhz per Division  
www.protekdevices.com  
05051.R15 3/13  
Page 4  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
SPICE MODEL  
FIGURE 1  
SPICE MODEL  
I/O  
I/O  
ABD  
ABD  
LCRD  
ABD  
LCRD  
LCRD  
LCRD  
Lg  
0.8nH  
Lg  
0.8nH  
UNIDIRECTIONAL  
BIDIRECTIONAL  
ABD - Avalanche Breakdown Diode (TVS)  
LCRD: Low Capacitance Recꢀfier Diode  
Lg - Lead Inductance  
TABLE 1 ꢀ SPICE PARAMETERS  
PARAMETER  
UNIT  
ABDꢄTVSꢅ  
See Table 2  
1
LCRD  
BV  
IBV  
Cjo  
IS  
V
200  
0.01  
5
µA  
pF  
See Table 2  
See Table 2  
0.6  
A
1E-13  
0.6  
Vj  
V
M
N
-
0.33  
0.33  
1
-
Ohms  
s
1
RS  
See Table 2  
1E-8  
0.31  
1E-9  
1.11  
TT  
EG  
eV  
1.11  
TABLE 2 ꢀ ABD SPECIFIC SPICE PARAMETERS  
PART NUMBER  
SM16LC03  
BVꢄVOLTSꢅ  
4.5  
IS ꢄAMPSꢅ  
CjopFꢅ  
438  
284  
146  
123  
102  
61  
RsꢄOhMSꢅ  
0.21  
1E-11  
1E-11  
1E-11  
1E-13  
1E-13  
1E-13  
1E-11  
1E-11  
1E-11  
1E-13  
1E-13  
1E-13  
SM16LC05  
6.0  
0.14  
SM16LC08  
8.5  
0.28  
SM16LC12  
13.3  
16.7  
26.7  
4.5  
0.40  
SM16LC15  
0.52  
SM16LC24  
1.54  
SM16LC03C  
SM16LC05C  
SM16LC08C  
SM16LC12C  
SM16LC15C  
SM16LC24C  
438  
284  
146  
123  
102  
61  
0.21  
6.0  
0.14  
8.5  
0.28  
13.3  
16.7  
26.7  
0.40  
0.52  
1.54  
www.protekdevices.com  
05051.R15 3/13  
Page 5  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
APPLICATION INFORMATION  
Transceiver  
D
Line 1  
Line 2  
Line 3  
Line 4  
Line 5  
Line 6  
Line 7  
D
R
R
Line 8  
16  
15  
14  
13  
12  
11  
10  
9
1
2
3
4
5
6
7
8
FIGURE 1 ꢀ BIDIRECTIONAL COMMONꢀMODE PROTECTION  
Circuit connecꢀvity is as follows:  
• Line 1 connected to Pin 9.  
• Line 2 connected to Pin 10.  
• Line 3 connected to Pin 11.  
• Line 4 connected to Pin 12.  
• Line 5 connected to Pin 13.  
• Line 6 connected to Pin 14.  
• Line 7 connected to Pin 15.  
• Line 8 connected to Pin 16.  
• Pins 1 - 8 connected to ground.  
CIRCUIT BOARD RECOMMENDATIONS  
Circuit board layout is criꢀcal for electromagneꢀc compaꢀbility protecꢀon. The following guidelines are recommended:  
• The protecꢀon device should be placed near the input terminals or connectors, the device will divert the transient current  
immediately before it can be coupled into the nearby traces.  
• The path length between the TVS device and the protected line should be minimized.  
• All conducꢀve loops including power and ground loops should be minimized.  
• The transient current return path to ground should be kept as short as possible to reduce parasiꢀc inductance.  
• Ground planes should be used whenever possible. For mulꢀlayer PCBs, use ground vias.  
www.protekdevices.com  
05051.R15 3/13  
Page 6  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
SOꢀ16 PACꢁAGE INFORMATION  
-A-  
OUTLINE DIMENSIONS  
MILLIMETERS  
INChES  
DIM  
MIN  
9.80  
3.80  
1.35  
0.35  
0.40  
MAX  
10.00  
4.00  
MIN  
0.386  
0.150  
0.054  
0.014  
0.016  
MAX  
0.393  
0.157  
0.068  
0.019  
0.049  
16  
1
9
8
A
B
-B-  
P
0.010” (0.25mm)  
B
+
8 PL  
M
M
C
1.75  
D
0.49  
F
1.25  
G
1.27 BSC  
0.05 BSC  
G
R X 45°  
D
C
J
0.18  
0.10  
5.80  
0.25  
0.25  
0.25  
6.20  
0.50  
0.007  
0.004  
0.229  
0.010  
0.009  
0.008  
0.244  
0.019  
K
0° - 10°  
P
-T-  
J
R
K
F
0.010” (0.25mm)  
T
B
A
+
S
S
M
NOTES  
16 PL  
1. -T- = Seaꢀng plane and datum surface.  
2. Dimensions “A” and “B” are datum.  
3. Dimensions “A” and “B” do not include mold protrusion.  
4. Maximum mold protrusion is 0.015” (0.380mm) per side.  
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.  
6. Dimensions are exclusive of mold flash and metal burrs.  
A
PAD LAYOUT DIMENSIONS  
B
MILLIMETERS  
INChES  
MIN  
DIM  
MIN  
1.14  
0.64  
6.22  
3.94  
1.02  
MAX  
1.40  
0.89  
-
MAX  
0.055  
0.035  
-
A
0.045  
0.025  
0.245  
0.155  
0.040  
B
C
D
E
C
D
4.17  
1.27  
0.165  
0.050  
E
NOTES  
1. Controlling dimension: inches.  
www.protekdevices.com  
05051.R15 3/13  
Page 7  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
TAPE AND REEL  
10 Pitches Cumulaꢀve  
Tolerance on tape ± 0.2  
P2  
P0  
D
t
E
F
W
K0  
B0  
A0  
P
User Direcꢀon of Feed  
SPECIFICATIONS  
TAPE  
REEL DIA.  
A0  
B0  
ꢁ0  
D
E
F
W
P0  
P2  
P
tmax  
WIDTh  
178mm (7”)  
16mm 6.50 ± 0.10 10.30 ± 0.10 2.10 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25  
NOTES  
1. Dimensions are in millimeters.  
2. Surface mount product is taped and reeled in accordance with EIA-481.  
3. Suffix - T7 = 7” Reel - 1,000 pieces per 16mm tape.  
4. Suffix - T13 = 13” Reel - 2,500 pieces per 16mm tape.  
5. Bulk product shipped in tubes of 48 pieces per tube.  
6. Marking on Part - part number, date code, logo and pin one defined by dot on top of package.  
Package outline per document number 06007.R3 1/11.  
ORDERING INFORMATION  
BASE PART NUMBER  
(xx = Voltage)  
LEADFREE SUFFIX  
TAPE SUFFIX  
QTY/REEL  
REEL SIZE  
TUBE QTY  
SM16LCxx/SM16LCxxC  
SM16LCxx/SM16LCxxC  
-LF  
-LF  
-T7  
1,000  
2,500  
7”  
48  
48  
-T13  
13”  
This device is only available in a Lead-Free configuraꢀon.  
www.protekdevices.com  
05051.R15 3/13  
Page 8  
SM16LC03 - SM16LC36C  
Only One Name Means ProTek’Tion™  
COMPANY INFORMATION  
COMPANY PROFILE  
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of tran-  
sient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.  
These TVS devices protect electronic systems from the effects of lightning, electrostaꢀc discharge (ESD), nuclear electromagneꢀc pulses  
(NEMP), inducꢀve switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog  
switches; mulꢀplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of con-  
sumer; industrial; automoꢀve and other applicaꢀons.  
CONTACT US  
Corporate headquarters  
2929 South Fair Lane  
Tempe, Arizona 85282  
USA  
By Telepꢂone  
General: 602-431-8101  
Sales: & Markeꢀng: 602-414-5109  
Customer Service: 602-414-5114  
Product Technical Support: 602-414-5107  
By Fax  
General: 602-431-2288  
By E-mail:  
Sales: sales@protekdevices.com  
Customer Service: service@protekdevices.com  
Technical Support: support@protekdevices.com  
ProTek Devices (Asia Pacific) Pte. Ltd.  
8 Ubi Road 2, #06-19  
Zervex  
Singapore - 408538  
Tel: +65-67488312  
Fax: +65-67488313  
Web  
www.protekdevices.com  
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.  
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.  
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering  
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of  
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,  
consequenꢀal or incidental damages.  
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.  
www.protekdevices.com  
05051.R15 3/13  
Page 9  

相关型号:

SM16LC05C-LF-T13

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, SOP-16
PROTEC

SM16LC05C-T13

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, PLASTIC, SOP-16
PROTEC

SM16LC05C-T7

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 16 Element, Silicon, PLASTIC, SOP-16
PROTEC

SM16LC05C/TR13

Trans Voltage Suppressor Diode, 5V V(RWM), Bidirectional,
MICROSEMI

SM16LC05CE3

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 8 Element, Silicon, SOP-16
MICROSEMI

SM16LC05E3

Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Unidirectional, 8 Element, Silicon, ROHS COMPLIANT, PLASTIC, SOP-16
MICROSEMI

SM16LC08

500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRY
PROTEC

SM16LC08-LF

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 8 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-16
PROTEC

SM16LC08-LF-T13

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 8 Element, Silicon, SOP-16
PROTEC

SM16LC08-LF-T7

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 8 Element, Silicon, SOP-16
PROTEC

SM16LC08-T13

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 8 Element, Silicon, PLASTIC, SOP-16
PROTEC

SM16LC08-T7

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 8 Element, Silicon, PLASTIC, SOP-16
PROTEC