413990-1 [MACOM]
RF Coax Connectors;型号: | 413990-1 |
厂家: | Tyco Electronics |
描述: | RF Coax Connectors 瞄准线 连接器 |
文件: | 总17页 (文件大小:503K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RF Coax Connectors
SMB Connectors
SMB Connectors are avail-
able in commercial and
high rel versions. They are
ideally suited for circuit
miniaturization and are
offered in a wide range of
configurations including
plugs, right-angle plugs,
jacks, bulkhead jacks and
adapters, as well as printed
circuit board and solder
jacks.
Product Facts
■ SMB offers snap-fit coupling
for quick connect/disconnect
■ Choice of Commercial or
High Rel Connectors
■ 50 and 75 Ω MIL-Type
connectors available
■ Straight plugs and jacks are
completely crimp terminated
■ Fast easy cable assembly
■ Low VSWR
Termination costs are kept
to a minimum using plugs
and jacks with a crimp cen-
ter contact and hex crimp
outer braid. Both hand held
tooling and pneumatic
bench-mounted tooling is
available. Easily assembled
right-angle plugs have a
hex crimp on the outer
■ Standard military, commer-
cial or Tyco Electronics
tooling
■ Listed under the Component
Program of Underwriters
Laboratories Inc.,
R
File No. E81956
■ PC Board soldered connec-
tors are recognized under
the Component Program of
braid ferrule and bifurcated
solder center contacts.
Underwriters
Tyco Electronics’ 75 Ohm BT
43 SMB Connectors feature
unique spring mating with
snap-fit couplings for quick
connect/disconnect. These
connectors are designed
to be intermateable with
75 Ohm SMB MIL-C-39012
connectors. They also fea-
ture reliable dual crimp
R
Laboratories Inc.,
File No. E81956
■ Certified by Canadian
Standards
Association
R
File No. LR 7189
cable terminations.
Packaging —All connectors are
packaged individually unless otherwise
noted under the “Military No. and/or
Comments” column in the connector
specifications chart.
Between Series Adapters
For SMB Between Series Adapters,
please see pages 251-260.
176
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connector Specifications
Electrical Characteristics
Environmental Characteristics
Impedance — 50 ohms and 75 ohms, nominal
Frequency Range — 0 to 4.0 GHz
Voltage Rating (VRMS) —
50 ohm connectors for RG 178/U series cable
50 ohm connectors for RG 316/U series cable
75 ohm connectors for RG 179/U series cable
75 ohm connectors for RG 195/U series cable
Temperature Rating — –65°C to +165°C
Corrosion (salt spray) — MIL-STD-202, Method 101, test condition B, 5% salt
solution
Vibration High Frequency — MIL-STD-202, Method 204, test condition B
(15 G’s)
Shock — MIL-STD-202, Method 213, test condition B, 75 G’s at 6 milliseconds, 1⁄2
sine
Sea Level
70,000 Feet
300
400
300
500
75
100
75
125
Insulations Resistance — 1000 megohms min.
Contact Resistance — (milliohms max.)
Thermal Shock — MIL-STD-202, Method 107, test condition B, except high tem-
perature shall be +85°C. High temperature shall be +200°C for connectors using
200°C cables.
After
Environment
Initial
Moisture Resistance — MIL-STD-202, Method 106, when interface gasket is
used. No measurements of high humidity. Insulation resistance shall be 200
megohms minimum within five minutes after removal from humidity.
Center contact
Outer contact
Braid to body
6.0
1.0
1.0
8.0
1.5
N/A
Durability Test — Conducted per MIL-C-39012 Reg. Para. 3.15, Method Para. 4.6.12
Contact Current Rating — 1.5 amps DC max.
Voltage Standing Wave Ratio (VSWR0 —
to 4.0 GHz or 80% of upper cutoff frequency of the cable, whichever is lower.
Materials
Body, Body Components and Male Contacts — Brass, half hard, per QQ-B-626,
Alloy 360, Zinc per QQ-Z-363
Mating Engagement
Cable
Female Contacts — Beryllium copper per QQ-C-530, heat treated per MIL-H-7199
Insulators — TFE fluorocarbon per ASTM D 1710, Type 1, Grade 1
Lockwashers — Phosphor bronze per QQ-B-750
Straight
1.30 + .04F
1.25 + .04F
Right-Angle
RG 178/U Series
RG 316/U Series
1.45 + .06F
1.35 + .04F
Crimp Ferrule — Annealed copper alloy per WW-T-799
Gaskets — Silicone rubber per ZZ-R-765, Class 11B, Grade 65-75
F=GHz, does not apply to 75 ohm connectors.
RF High Potential Withstanding Voltage
Frequency — 5 MHZ
Leakage Current — N/A
50 ohm connectors for RG 178/U series cable
50 ohm connectors for RG 316/U series cable
75 ohm connectors for RG 179/U series cable
75 ohm connectors for RG 195/U series cable
Plating
Center Contacts — 0.00127 [.000050] min. Gold per MIL-G-452048 Type 1,
Grade C, Class 1, over 0.00254 [.000100] min. nickel per QQ-N-290
Other Metal Parts — Gold, Nickel or Solder plated to meet the Finish and
Corrosion requirements of MIL-C-39012
675 VRMS
950 VRMS
950 VRMS
1225 VRMS
RF Leakage — –55 dB min. at 2-3 GHz
Insertion Loss — .30dB max. at 3 GHz
Mechanical Characteristics
Engagement Forces — 14 lbs. [62.3 N] maximum engagement initially.
After 500 matings, 14 lbs. [62.3 N] maximum engagement and 2 lbs. [8.8 N] minimum
disengagement for all of SMBs.
Cable Attachment —
Straight Connectors — Crimp, both center contact and braid
Right-Angle Connectors — Crimp on braid and bifurcated solder center contact
Durability — 500 cycles per MIL-C-39012
Contact Captivation — When captivated, the contacts will withstand 4.0 lbs.
minimum axial force.
Cable Retention — When properly assembled to the compatible braided coaxial
cable, the retention is equal to the breaking strength of the cable.
Marking — Per MIL-STD-130
177
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm
Straight Plugs
6.35
[.250]
Max.
21.10
[.830]
Max.
Center
Outer
Contact
Plating
Other
Metal Parts
Plating
RG/U
Cable
Part
No.
Contact
Dielectric
Style
Plating
178, 178A, 178B,
196, 196A
Gold
Gold
Nickel
TEFLON
MIL Type
413985-6
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Gold
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
MIL Type
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
MIL Type
413985-1
413985-3
413985-7
414946-1
5414946-2
1-413985-1
5414946-5
5414946-6
413985-2
413985-4
5414946-3
413985-8
174, 316,
Gold
Nickel
Gold
188, 188A
Gold
Gold
Nickel
Gold
Gold
179, 179A, 179B,
161, 187, 187A,
BELDEN 9221
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Gold
Nickel
Nickel
Nickel
RG 316,
188 Double Braid
Gold
Nickel
MIL Type
Die Cast
Right-Angle Plugs
13.71
[.540]
Max.
13.71
[.540]
Max.
6.35
[.250]
Dia.
13.21
[.520]
Max.
6.35
[.250]
Dia.
13.21
[.520]
Max.
Center
Contact
Plating
Outer
Contact
Plating
Other
Metal Parts
Plating
RG/U
Cable
Part
No.
Dielectric
Style
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Nickel
Gold
Gold
Gold
Gold
Nickel
Nickel
Gold
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
MIL Type
MIL Type
Die Cast
MIL Type
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
414002-7
414002-8
5414363-8
414002-1
414002-3
414002-5
5414363-3
5414363-5
414002-2
414002-4
5414363-4
178, 178A, 178B,
196, 196A
Nickel
Nickel
Nickel
Nickel
Gold
174, 316, 188, 188A
179, 179A, 179B
161, 187, 187A
BELDEN 9221
RG 316,
188 Double Braid
Nickel
Nickel
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
178
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
Commercial Jack
MIL Type Jack
Straight Jacks
5.56
[.219]
Hex.
25.40
[1.000]
Die Cast
Brass
Center
Contact
Plating
RG/U
Cable
Body
Plating
Jack
Part No.
Dielectric
Style
178, 178A, 178B, 196, 196A
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
TEFLON
TEFLON
TEFLON
TEFLON
MIL Type
MIL Type
Die Cast
5414170-2
5414170-1
414948-1
414948-3
174, 316,
188, 188A
RD 316, 188 Double Braid
Commercial
Bulkhead Jacks
6.35
[.250 ]
Hex.
5/4.88
[.197/.192]
Dia.
28.60
[1.120]
Center
Contact
Plating
Bulkhead
Jack.
Part No.
RG/U
Cable
Body
Plating
Dielectric
Style
Gold
Gold
Gold
Nickel
Nickel
Nickel
TEFLON
TEFLON
TEFLON
Commercial
Commercial
Commercial
5415006-1
5228217-1
5415006-2
174, 316,
188,188A
2.08/2.01
[.082/.079]
RD 316, 188 Double Braid
Maximum Panel Thickness 2.36 [.093]
Recommended Panel Cutout
for Bulkhead Jack and Adapter
Bulkhead Jack
Adapter
(Jack-Jack)
6.35
Hex.
[.250]
17.53
[.690]
Max.
Center
Contact
Plating
Body
Plating
Type
Dielectric
Style
Part No.
Gold
Gold
Nickel
Gold
TEFLON
TEFLON
MIL Type
MIL Type
228553-1
228553-2
Jack-To-Jack
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
179
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
PC Board
Vertical Jacks
5.08
[.200]
Ø 1.60
[.063]
4 Plcs.
2.54
[.100]
A
5.08
[.200]
Ø 1.19
[.047]
B
Recommended
PC Board Layout
Jacks
Center
Contact
Plating
Body
Plating
Dim.
A
Dim.
B
Part
No.
Type
Dielectric
Style
7.62
3.94
––
––
––
––
Gold
Gold
Gold
Gold
Gold
Nickel
Nickel
Tin
TEFLON
TEFLON
MIL Type
MIL Type
MIL Type
413990-1
413990-2
414612-2
5221111-1
.300
.155
7.62
.300
10.16
.400
3.94
.155
3.94
.155
2.54
.100
8.25
.325
TEFLON
Brass,
Stamped
Max. TEFLON
PC Board
Vertical Plugs
± 0.20
11.53
[.454
± .008
]
6.35
[.250]
Sq.
± 0.13
6.32
[.249]
3.94
[.155
± .005
]
± 0.05
5.08
[.200
Ø 1.60
[.063]
2.54
[.100]
4 Plcs.
0.64
[.025]
± .002
]
A
B
± 0.05
± .002
1.02
[.040
Typ.
Ø 6.35
[.250]
5.08
[.200]
]
Ø 1.19
[.047]
± 0.03
± .001
Ø 0.97
[.038
]
Recommended
PC Board Layout
1.42
[.056]
Typ.
Plugs
Center
Contact
Plating
Recommended
PC Board
Layout
Body
Plating
Dim.
A
Dim.
B
Part
No.
Type
Dielectric
Style
Low Profile (Plug)
Mated Pair
3.94
.155
7.62
300
Gold
Nickel
TEFLON
B
MIL Type 415774-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
180
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
PC Board,
Right-Angle Jacks
Jack Low Profile
Jack with Standoff Pads
Bulkhead Jack
12.70
[.500]
13.46
[.530]
19.87
[.782]
A
A
B
A
B
B
Jacks
Center
Contact
Plating
Interface
Body
Plating
PCB
Leg
Plating
Recommended
PC Board
Layout
Dim.
A
Dim.
B
Part
No.
Type
Dielectric
Style
7.11
3.94
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
Gold
Nickel
Gold
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
TEFLON
Polypropylene
TEFLON
MIL Type
MIL Type
Die Cast
Die Cast
MIL Type
MIL Type
Die Cast
Die Cast
Die Cast
Die Cast
A
A
A
A
A
A
A
B
A
A
C
A
413996-2
413996-4
415340-1
415672-1
414026-2
414026-3
5414337-1
5415379-1*
415381-1ꢀ
414963-1
5228435-1
1274330-1
.280
.155
7.11
.280
7.11
.280
8.76
.345
8.51
.335
8.76
.345
8.76
.345
8.76
.345
8.51
.335
3.94
.155
2.79
.110
2.79
.110
3.94
.155
3.94
.155
3.94
.155
2.79
.110
3.94
.155
Low Profile
Gold
Gold
Gold
Gold
Nickel
Nickel
Nickel
Nickel
Gold
Nickel
Tin-Lead
Nickel
Nickel
Gold
With
Standoff Pads
7.67
.302
9.78
.385
7.67
.302
2.79
.110
3.94
.155
2.79
.110
Bulkhead
Commercial
Bulkhead
Brass,
Stamped
Nickel
Gold
Tin
Gold
Die Cast
* 5 leg design
5.08
PC Board,
Right-Angle Plug
[.200]
5.08
[.200]
5.08
[.200]
Ø 1.75
[.069]
4 Plcs.
2.54
[.100]
2.54
[.100]
Ø 1.32
[.052]
2.54
[.100]
1.75 Dia.
[.069] Min.
(4 Holes)
5 Plcs.
13.46
[.530]
A
B
5.08
[.200]
5.08
[.200]
5.08
[.200]
1.24 Dia.
[.049] Min.
± 0.05
Ø 1.24
± .002
[.049
]
A
B
C
6.35
[.250]
Dia.
Recommended
PC Board Layouts
Plugs
Center
Contact
Plating
Interface
PCB
Leg
Plating
Recommended
PC Board
Dim.
A
Dim.
B
Part
No.
Body
Dielectric
Style
Plating
Layout
8.76
2.79
Gold
Gold
Nickel
Nickel
Tin
TEFLON
TEFLON
Die Cast
Die Cast
B
A
415380-1*
5414338-1
.345
.110
8.76
.345
3.94
.155
Nickel
* 5 leg design
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
181
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
Bulkhead PC Board Jack,
Solder Receptacle Kits
5/4.88
[.197/.192]
Dia.
6.35
Hex.
[.250]
3.71
[.146]
2.08/2.01
[.082/.079]
16.0
Max.
[.630]
Maximum Panel Thickness 2.36 [.093]
Recommended Panel Cutout
Kit Includes Lockwasher
and Jam Nut
Center
Body
Kit
Part
No.
Type
Contact
Plating
Dielectric
Style
Plating
Front Mount
Rear Mount
Gold
Gold
Nickel
Nickel
TEFLON
TEFLON
MIL Type
MIL Type
228216-1*
228215-1*
Lockwasher and Jam Nut
*includes Jam Nut and Lockwasher
Part No.
415001-2
Part No.
414969-2
SMB Receptacle Jack
4.45
[.175]
6.99
[.275]
1.02
[.040]
2.92
[.115]
3.18
[.125]
3.45
[.136]
3.68
[.145]
Ref. Plane
Hex
Dia.
6.35
[.250]
± 0.13
0.97
[.038
Dia.
± .001
]
10-32 UNEF-2A
Center
Contact
Plating
Body
Plating
Type
Dielectric
Style
Part No.
Front Mount
Gold
Nickel
TEFLON
MIL Type
414895-1
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
182
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm
Mini 75 ohm SMB connec-
tors are ideally suited for
circuit miniaturization in
communication, broadband
and switching equipment
as well as a variety of other
applications.
Product Facts
■ Industry standard for minia-
ture 75 ohm SMB
■ SMB offers snap-fit
coupling for quick
connect/disconnect
■ Suitable for high density
They offer the same low
consistent mating/unmating
force as Tyco Electronics
standard SMB products and
therefore, outer contact
resistance values are main-
tained from connector to
connector.
applications
■ Fast easy cable assembly
■ Low VSWR
■ Connectors offer consistent
mating and unmating forces
■ Straight plugs and jacks are
completely crimp termi-
nated
Standard military, commer-
cial or Tyco Electronics tool-
ing can be used to
■ Low cost
terminate these products.
Electrical Characteristics
Impedance — 75 ohms
Frequency Range — 0 to 4.0 GHz
Insulation Resistance — 1000 megohms
Contact Current Rating — 1.5 amps DC max.
Cost effective assembly of
the straight plugs is com-
pleted with a crimp center
contact and hex crimp on
the outer braid. Right-angle
plugs have a hex crimp on
the outer braid ferrule and
bifurcated solder center
contacts.
Mechanical Characteristics
Engagement Forces — Initial—14.0 lbs. [62.3 N] maximum engagement.
After 500 matings, 14.0 lbs. [62.3 N] maximum engagement.
Durability—500 cycles
Environmental Characteristics
Temperature Rating — -65°C to +165°C
183
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm (Continued)
Straight Plug
Ø 1.73
[.068]
Ø 6.35
[.250]
Ø 2.64
[.104]
17.78
Ref.
[.700]
Center Contact
Plating
Outer Contact
Body
RG Cable
Part No.
Plating
Plating
Nickel
Nickel
Nickel
179, 187
179, 187
RD 179
Gold
Gold
Gold
Gold
5415487-1
5415487-2
5415487-3
Nickel
Nickel
Right-Angle Plug
13.7
[.539]
Max.
10.21
[.402]
Ref.
Ø 6.35
[.250]
± 0.25
± .010
16.0
[.630]
9.78
[.385
Ref.
]
Center Contact
Plating
Outer Contact
Plating
Body
Plating
RG Cable
Part No.
179, 187
179, 187
RD 179
Gold
Gold
Gold
Nickel
Gold
Gold
Nickel
Nickel
Nickel
5415484-1
5415484-2
5415484-3
Bulkhead Jack
22.86
Max.
[.900]
± 0.05
Ø 3.66
[.144
± .002
]
Ø 5.03
[.198]
4.52
[.178]
Recommended
PC Board Layout
9.7
[0.38]
10.92
[.430]
6.35
Hex.
[.250]
Center Contact
Plating
Body
Plating
RG Cable
Part No.
179, 187
Gold
Nickel
415500-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
184
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm (Continued)
± 0.08
± .003
]
5.08
[.200
± 0.18
Vertical PC Board Jacks
7.62
[.300
± 0.08
± .003
2.54
[.100
± .007
]
]
± 0.08
± .003
Ø 0.71
[.028
± 0.08
± .003
]
5.08
[.200
Ø 3.67
[.145]
Max.
]
± 0.08
Ø 1.32
[.052
± .003
]
4 Plcs.
Recommended
PC Board Layout
Leg
Length
Center Contact
Plating
Body
Plating
Part No.
2.11
Gold
Gold
Gold
Gold Flash
415504-2
.083
3.05
.120
Gold
415504-3
3.05
.120
Gold Flash
415504-4
3.18
[.125]
5.54
[.218]
Right-Angle PC Board
Jacks
± 0.08
5.08
[.200
± .003
± 0.08
]
2.54
[.100
± .003
]
± 0.25
7.95
± 0.08
Ø 0.71
[.028
± .010
[.313
]
± .003
± 0.08
]
5.08
14.1
[.555]
± .003
[.200
]
± 0.08
± .003
Ø 1.32
[.052
]
4 Plcs.
Recommended
PC Board Layout
Ø 3.71
[.146]
Max.
Leg
Center Contact
Plating
Body
Part No.
415490-1
415490-2
415490-3
415490-4
Length
Plating
2.79
.110
Gold
Gold
Gold
Gold
Gold
Nickel
Gold
2.79
.110
2.11
.083
2.11
.083
Nickel
4.50
[.177]
2.79
[.110]
Right-Angle PC Board
Bulkhead Jacks
± 0.08
5.08
[.200
± 0.08
± .003
2.54
[.100
]
± .003
]
± 0.08
Ø 0.71
[.028
± 0.08
± .003
5.08
[.200
19.94
[.785]
]
± .003
]
2.36
[.093]
Panel
± 0.08
± .003
Max.
Ø 1.32
[.052
11.18
[.440]
]
4 Plcs.
Thickness
Recommended
PC Board Layout
Ø 3.71
Max.
[.146]
Leg
Center Contact
Body
Part No.
415377-1
415377-2
415377-5*
Length
Plating
Plating
2.79
.110
Gold
Nickel
Gold
Gold
2.79
.110
Gold
Gold
2.79
.110
Note: Part Numbers are RoHS
compliant except:ꢀ Indicates
non-RoHS compliant.
*Isolated.
185
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ)
Product Facts
■ Widely used in data
transmission and telecom-
munication applications
■ BT 43 connector developed
from the SMB range and
feature snap-on and
latching variant
■ Most BT 43 connectors are
available as fully crimped
connectors.
■ BT 43 and 75 Ω connectors
available in solder and
crimp versions
Female center contacts —
The Tyco Electronics range
of 75 ohm SMB (SMZ)
connectors are designed
to meet the increasing
demands of the
Specifications
Max working voltage (dc) — 500 V
Max proof voltage (dc) — 1.5 kV
Contact resistance (inner) —
5 milliohm
Contact resistance (outer) —
1 milliohm
Copper Alloy
Male center contacts —
Copper Alloy
Outer contacts — BeCu
Plating —
Contacts and critical surfaces — Gold
Other parts — Nickel
Insulators — P.T.F.E.
Telecommunications
market, and are designed
in accordance with
Bodies and other parts — Brass
BS9210 F0022.
186
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
reference purposes only.
Specifications subject
to change.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
specified. Values in brackets
are standard equivalents.
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.5
Straight Plugs, Snap-On
Assembled
[1.20]
28.0
[1.10]
20.4
8.8
[0.35]
[0.80]
Dia.
Termination Method
Cable Type
Body Plating
Part No.
Inner
Outer
Crimp
Crimp
RG 179B/U
BT2002
Crimp
Crimp
Selective Gold
Selective Gold
1311097-1
1311098-1
29.9
[1.18]
Straight Plugs, Latching,
Crimp/Crimp
Assembly
27.8
9.6
[0.38]
Dia.
[1.09]
Cable Type
RG 179B/U
BT2003
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1311099-1
1311100-1
1311101-1
1311696-1
1311102-1
BT2002
BT2001
BT3002, TZC75024
RG 59B/U,
RG 140/U, URM90
Selective Gold
1313507-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
187
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
17.93
Max.
Right-Angle Socket,
Snap-On, Solder/Crimp
[0.71]
21.67
[0.85]
Max.
16.86
[0.66]
Max.
10.16
[0.40]
Max.
Cable Type
Body Plating
Selective Gold
Selective Gold
Part No
1311103-1
1311104-1
RG 179B/U
BT3002, TZC75024
23.0
[0.91]
Right-Angle Socket,
Latching, Solder/Crimp
Ref.
21.0
Ref.
[0.83]
16.3
[0.64]
Ref.
9.9
[0.39]
Ref.
Cable Type
RG 179B/U
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1311106-1
1311698-1
1311111-1
1313508-1
BT2003
BT3002, TZC75024
RG 59B/U, RG 140/U
30.4
Assembled
[1.20]
Straight Free Plug,
Crimp/Crimp
20.2
[0.80]
5.60
[0.22]
8.82
[0.35]
Dia.
Cable Type
Body Plating
Part No
RG 179B/U
Selective Gold
1408041-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
188
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.8
Assembled
[1.21]
Straight Bulkhead Plug
28.5
[1.12]
10.8
[0.43]
3.0 Max
[0.12] Panel
8.4
[0.33]
Dia.
5.6
[0.22]
7.5
[0.30]
Mounting Detail
Body Plating
Termination Method
Cable Type
Part No.
Inner
Outer
RG 179B/U
Crimp
Crimp
Selective Gold
Selective Gold
Selective Gold
1311120-1
1311701-1
1311122-1
BT500B, BT2003,
BT2003A
Crimp
Crimp
Crimp
Crimp
BT3002, TZC75024
32.1
[1.26]
Assembled Length
± 0.05
10.75
[0.42
± .002
]
7.50
[0.30]
A/F
8.00
[0.31]
Dia.
Panel Cut Out
Termination Method
Cable Type
Body Plating
Part No.
1313511-1
Inner
Outer
3M: 043, 031C,
CS4456, Gore: GCX
Crimp
Crimp
Selective Gold
20.4
[0.80]
Right-Angle Bulkhead Plug,
Solder/Crimp
16.7
[0.66]
Ref.
21.5
[0.85]
Ref.
10.1
[0.40]
Ref.
Cable Type
Body Plating
Part No
1311115-1
RG 179B/U
Selective Gold
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
189
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
30.4
Assembled
[1.20]
DDF Plug,
Crimp/Crimp
27.9
[1.10]
10.3
Dia.
[0.41]
Cable Type
RG 179B/U
BT2003
Body Plating
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Selective Gold
Part No
1327083-1
1311117-1
1311700-1
1313883-1
1311118-1
BT2002
B2001
BT3002, TZC75024
RG 59B/U, RG 140/U,
URM90
Selective Gold
1313887-1
DDF Plug,
Crimp/Crimp
7.54
[0.30]
Ref.
27.8
Ref.
[1.09]
Cable Type
Body Plating
Part No
RD179, 124431 (Filotex),
1366 (Orebro), K02253D-1,
K02253-2 (Shuner)
Selective Gold
1314422-1
PC Board Plug 43/1D
PC Board Plug 43/1E
11.4
[0.45]
13.2
[0.52]
5.08
[0.20]
6.20
[0.24]
3.80
[0.15]
5.08
[0.20]
9.5
[0.37]
5.08
[0.20]
Dia.
5.08
[0.20]
15.0
[0.59]
0.90
[0.04]
6.5
[0.26]
Sq.
Dia.
1.70 Dia.
1.20 Dia.
1.70 Dia.
[0.067] 4 Holes
1.20 Dia.
[0.047] 1 Hole
[0.07] 4 Holes
[0.05] 1 Hole
Mounting Detail
Mounting Detail
Body Plating
Part No.
Body Plating
Part No.
Selective Gold
1311125-1
Selective Gold
1314103-1
Right-Angle PC Board Plug
22.14
[.872]
5.08
[.200]
5.08
[.200]
± 0.10
± .004
Ø 8.35
[.329
Ø 1.20
[.047]
Min.
]
5/16-32
UNEF
Ø 1.70 Min.
[.067] 4 Holes
14.00
[.551]
2.54
[.100]
Ø 6.22
[.245]
2.54
[.100]
3/8 Across Flats
Ø 8.21
[.323]
± 0.10
± .004
2.90
[.114
Mounting Detail
Panel Cutout Detail
]
Part No. 1314102-1
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
190
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
17.1
[0.67]
Straight Adapter
Plug-Plug
17.0
[0.67]
7.5
[0.30]
11.0
[0.43]
Dia.
8.0
[0.31]
Dia.
8.7
[0.34]
A/F
2.2 Max.
[0.09] Panel
Mounting Detail
Part No. 1313364-1
Part No. 1311127-1
Body Plating
Part No.
1313364-1
1311127-1
Selective Gold
Selective Gold
37.4
[1.47]
Tester 430A
11.1
[0.44]
8.8
[0.35]
Dia.
Dia.
Body Plating
Part No.
Selective Plating
6-1311703-1
100.0
[3.94]
Extraction Tool 65A
10.0
[0.39]
Dia.
Part No.
1311164-1ꢀ
Note: Part Numbers are RoHS compliant except:ꢀIndicates non-RoHS compliant.
191
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
RF Coax Connectors
SMB Connector Crimp Tooling
50 Ω/75 Ω
Commercial Connector Tooling
Center Contact Crimp Tooling Braid Crimp Tooling
MIL Type Connector Tooling
Center Contact Crimp Tooling Braid Crimp Tooling
MIL-C-
22520/2-01
Tool
Dies for
Tyco Electronics
PRO-CRIMPER
Hand Tool
Dies for
Tyco Electronics
PRO-CRIMPER
Hand Tool
Dies for
Tyco Electronics
PRO-CRIMPER
Hand Tool
MIL-C-
22520/5-01
Tool
DANIELS* Hex
Crimp Die
RG/U
Cable
DANIELS* DANIELS*
DANIELS Hex Die
Selector
Position
Hand
Tool
Positioner
Number
Hand
Tool
Across
Flats
DANIELS* Position
Positioner
Number
Number Position
Number Position
178, 178A,
178B, 196,
196A
Female-K699
4
Female-K699
Male-K727
2.67
.105
58489-1
58489-1
A&B
Y624
AFM8
4
58483-1
A
HX4-1637
Male-K727
Double Braid
178, 196
Female-K699
Male-K727
3.25
—
—
—
4
—
—
A
—
AFM8
AFM8
4
4
58483-1
58483-1
B
B
HX4-1637
HX4-1637
.128
174, 316
188, 188A
Female-K699
Male-K727
Female-K699
Male-K727
3.25
.128
58489-1
58489-1
Y444
Double Braid
174, 316,
188
Y196
3.84
58489-1
58489-1
Female-K699
Male-K727
4
4
58489-1
58489-1
C
C
AFM8 Female-K699
4
58483-1
58483-1
C
B
HX4-1637
HX4-1637
Location A
.151
Double Braid
174, 316,
188
Y196
Location A
3.25
.128
AFM8
Solder
—
179, 179A
179B, 161,
3.25
.128
58489-1
Female-K699
4
58489-1
A
Y444
AFM8 Female-K699
4
58483-1
B
HX4-1637
187, 187A,
BELDEN 9221
179, 179A
179B, 161,
3.25
58489-1
Male-K727
—
4
58489-1
A
Y444
—
—
—
Solder
Solder
—
—
58483-1
58483-1
B
HX4-1637
HX4-1637
187, 187A,
.128
BELDEN 9221
180, 180A
180B
3.84
.151
—
—
—
—
C
Mini SMB 75 ohm
179, 187
—
—
Female-K699
—
—
58483-1
58483-1
B
B
HX4-1637
HX4-1637
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Solder
Center
Contact
179, 187
Note: All 75 ohm SMB connectors have a solder center contact.
Note: Equivalent military tool part numbers– M22520/5-37 – DANIELS Die Set Y138
M22520/5-01 – DANIELS Hand Tool HX4
M22520/5-33 – DANIELS Die Set Y136
M22520/5-41 – DANIELS Die Set Y140
M22520/5-03 – DANIELS Die Set Y196
M22520/2-01 – DANIELS Hand Tool AFM8
* DANIELS Manufacturing Corporation
6103 Anno Avenue
Orlando, Florida 32809
Telephone: 407-855-6161
FAX: 407-855-6884
BELDEN is a trademark of Belden Wire
and Cable Company.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
Note: Part Numbers are RoHS compliant except:ꢀ Indicates non-RoHS compliant.
192
Catalog 1307191
Revised 3-07
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
www.tycoelectronics.com
UK: 44-8706-080-208
相关型号:
©2020 ICPDF网 联系我们和版权申明