S8006RS3TP56 [LITTELFUSE]
Silicon Controlled Rectifier;型号: | S8006RS3TP56 |
厂家: | LITTELFUSE |
描述: | Silicon Controlled Rectifier |
文件: | 总11页 (文件大小:1055K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Sxx06xSx & Sxx06x Series
®
Description
Excellent unidirectional switches for phase control
applications such as heating and motor speed controls.
Sensitive gate SCRs are easily triggered with microAmps
of current as furnished by sense coils, proximity switches,
and microprocessors.
Standard phase control SCRs are triggered with few
milliamperes of current at less than 1.5V potential.
Features & Benefits
• RoHS compliant
• Voltage capability up
to 1000 V
• Glass – passivated
junctions
• Surge capability up to
100 A
Agency Approval
Agency
Agency File Number
Applications
L Package: E71639
®
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also
controls for power tools, home/brown goods and white
goods appliances.
Main Features
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
Symbol
IT(RMS)
Value
Unit
A
6
Schematic Symbol
VDRM/VRRM
IGT
400 to 1000
0.2 to 15
V
mA
A
K
G
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
217
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
Parameter
Test Conditions
Value
Unit
Sxx06LSy
TC = 80°C
TC = 95°C
TC = 80°C
TC = 95°C
Sxx06RSy
Sxx06DSy
Sxx06VSy
IT(RMS)
RMS on-state current
Average on-state current
6
A
Sxx06LSy
Sxx06RSy
Sxx06DSy
Sxx06VSy
IT(AV)
3.8
A
A
single half cycle; f = 50Hz;
83
TJ (initial) = 25°C
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
100
TJ (initial) = 25°C
I2t
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60Hz; TJ = 110°C
TJ = 110°C
41
100
A2s
A/μs
A
di/dt
IGTM
PG(AV)
Tstg
TJ
1
Average gate power dissipation
Storage temperature range
0.1
W
TJ = 110°C
-40 to 150
-40 to 110
°C
Operating junction temperature range
°C
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
Parameter
Value
Unit
Sxx06L
TC = 100°C
Sxx06R
Sxx06D
Sxx06V
IT(RMS)
RMS on-state current
Average on-state current
6
A
TC = 110°C
TC = 100°C
TC = 110°C
Sxx06L
Sxx06R
Sxx06D
Sxx06V
IT(AV)
3.8
A
A
single half cycle; f = 50Hz;
83
TJ (initial) = 25°C
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
100
TJ (initial) = 25°C
I2t
I2t value for fusing
Critical rate-of-rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60Hz;TJ =125°C
TJ = 125°C
41
100
A2s
A/μs
A
di/dt
IGTM
PG(AV)
Tstg
TJ
2
Average gate power dissipation
Storage temperature range
0.5
W
TJ = 125°C
-40 to 150
-40 to 125
°C
Operating junction temperature range
°C
Note: xx = voltage
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
218
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive SCRs
Value
Symbol
Test Conditions
Unit
Sxx06xS2
Sxx06xS3
IGT
MAX.
MAX.
TYP.
200
500
μA
V
VD = 6V RL = 100 Ω
VGT
dv/dt
VGD
VGRM
IH
0.8
8
VD = VDRM; RGK = 1kΩ;TJ = 110°C
VD = VDRM RL = 3.3 kΩ TJ = 110°C
IGR = 10μA
V/μs
V
MIN.
MIN.
MAX.
MAX.
TYP.
0.2
6
V
IT = 20mA (initial)
6
50
4
8
45
5
mA
μs
μs
tq
IT = 2A; tp= 50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT PW = 15µs IT = 12A
tgt
Note: xx = voltage, x = package
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard SCRs
Symbol Test Conditions
IGT
Value
Unit
Sxx06x
MAX.
15
mA
V
VD = 12V RL = 60 Ω
VGT
MAX.
1.5
350
300
250
100
250
225
200
0.2
30
400V
600V
800V
1000V
400V
600V
800V
VD = VDRM; gate open;TJ = 100°C
dv/dt
MIN.
V/μs
VD = VDRM; gate open;TJ = 125°C
VGD
IH
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 200mA (initial)
MIN.
MAX.
MAX.
TYP.
V
mA
μs
tq
IT = 2A; tp= 50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT PW = 15µs IT = 12A
35
tgt
2
μs
Note: xx = voltage, x = package
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
219
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Static Characteristics
Symbol
Test Conditions
Value
1.6
Unit
VTM
IT = 12A; tp = 380 µs
MAX.
MAX.
V
TJ = 25°C
400 – 600V
400 – 600V
400 – 800V
1000V
5
Sxx06xyy
TJ = 110°C
250
10
TJ = 25°C
I
DRM / IRRM
VDRM = VRRM
20
μA
Sxx06x
400 – 800V
1000V
200
3000
500
TJ = 100°C
TJ = 125°C
400 – 800V
Note: xx = voltage, x = package, yy = sensitivity
Thermal Resistances
Symbol
Parameter
Value
2.6
4.3
2.4
1.8
2.5
4.0
2.3
1.7
40
Unit
Sxx06RSy
Sxx06LSy
Sxx06VSy
Sxx06DSy
Sxx06R
Junction to case (AC)
°C/W
Rθ(J-C)
Sxx06L
Sxx06V
Sxx06D
Sxx06RSy
Sxx06LSy
Sxx06VSy
Sxx06R
65
85
Junction to ambient
°C/W
Rθ(J-A)
40
Sxx06L
50
Sxx06V
70
Note: xx = voltage, y = sensitivity
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
220
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature (Sensitive SCR)
Figure 2: Normalized DC GateTrigger Current
vs. JunctionTemperature (Standard SCR)
4.0
4.0
3.0
2.0
1.0
0.0
3.0
2.0
1.0
0.0
85
125
-40
-15
10
35
60
110
-40
-15
85
10
35
60
110
JunctionTemperature (TJ) - (ºC)
JunctionTemperature (TJ) - (ºC)
Figure 3: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
Figure 4: Normalized DC Holding Current
vs. JunctionTemperature
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
35
85
125
60
110
JunctionTemperature (TJ) - (ºC)
JunctionTemperature (TJ) - (ºC)
Figure 5: On-State Current vs. On-StateVoltage
(Typical)
Figure 6: Power Dissipation (Typical) vs. RMS On-State
Current
6
5
30
TJ= 25°C
25
20
15
10
5
4
3
2
1
0
0
0.7
1.3
1.6
0.8
0.9
1.0
1.2
1.4
1.5
1.1
0
1
2
3
4
5
6
Instantaneous On-State Voltage (vT) - Volts
RMS On-State Current [IT(RMS)] - (Amps)
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
221
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Figure 7: Maximum Allowable CaseTemperature
Figure 8: Maximum Allowable CaseTemperature
vs. Average On-State Current
vs. RMS On-State Current
130
130
125
120
115
110
105
100
95
Sxx06R
Sxx06D
Sxx06V
Sxx06R
Sxx06D
Sxx06V
125
120
Sxx06RSy
115
Sxx06RSy
Sxx06DSy
Sxx06DSy
Sxx06VSy
110
Sxx06L
Sxx06L
105
100
95
Sxx06LSy
90
90
85
80
CURRENTWAVEFORM: Sinsuoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
CURRENTWAVEFORM: Sinsuoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sx06LSy
85
80
0
1
2
3
4
5
6
7
0
1
2
3
4
RMS On-State Current [IT(RMS)] - Amps
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable AmbientTemperature
vs. RMS On-State Current
Figure 10: Maximum Allowable AmbientTemperature
vs. Average On-State Current
120
120
CURRENT WAVEFORM: Sinusoidal
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
LOAD: Resistive or Inductive
Sxx06R
CONDUCTION ANGLE: 180°
FREE AIR RATING
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx06R
100
100
80
60
40
20
0
Sxx06L
80
Sxx06L
Sxx06LSy
Sxx06RSy
Sxx06V
60
40
20
0
Sxx06RSy
Sxx06LSy
Sxx06V
Sxx06VSy
Sxx06VSy
0.0
0.5
1.0
1.5
0.0
0.5
1.0
1.5
2.0
2.5
RMS On-State Current [IT(RMS)] - Amps
Average On-State Current [IT(AVE)] - Amps
Note: xx = voltage, y = sensitivity
Figure 11: Peak Capacitor Discharge Current
Figure 12: Peak Capacitor Discharge Current Derating
1000
1.2
1.0
0.8
0.6
0.4
100
Standard SCR
Sensitive SCR
ITRM
0.2
0.0
tW
10
1.0
0.5
10.0
50.0
0
2 5
50
75
100
125
150
Pulse Current Duration (tw) - ms
CaseTemperature (TC) - ºC
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
222
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Figure 13: Surge Peak On-State Current vs. Number of Cycles
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
100
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
1
1
10
100
1000
Surge Current Duration -- Full Cycles
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
TL
TS(max)
TS(min)
25
-Temperature Min (Ts(min)
)
150°C
Ramp-up
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
223
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Physical Specifications
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
UL recognized epoxy meeting flammability
classification 94V-0
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature Cycling
Copper Alloy
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
Design Considerations
1008 hours; -40°C
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of theThyristor. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
MIL-STD-750, M-1056
10 cycles; 0°C to 100°C; 5-min dwell-
time at each temperature; 10 sec (max)
transfer time between temperature
Thermal Shock
Autoclave
EIA / JEDEC, JESD22-A102
168 hours (121°C at 2 ATMs) and
100% R/H
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
X
600V
X
800V
1000V
Sxx06RS2
Sxx06LS2
Sxx06VS2
Sxx06DS2
Sxx06RS3
Sxx06LS3
Sxx06VS3
Sxx06DS3
Sxx06R
0.2mA
0.2mA
0.2mA
0.2mA
0.5mA
0.5mA
0.5mA
0.5mA
15mA
15mA
15mA
15mA
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
TO-220R
TO-220L
TO-251
TO-252
TO-220R
TO-220L
TO-251
TO-252
TO-220R
TO-220L
TO-251
TO-252
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Sxx06L
X
X
Sxx06V
X
X
Sxx06D
X
X
Note: xx = voltage
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
224
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Dimensions —TO-251AA (V/I-Package) —V/I-PAKThrough Hole
TC MEASURING POINT
AREA: 0.040 IN2
Inches
Typ
Millimeters
Typ
Dimension
Min
Max
0.050
0.245
0.375
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.052
0.044
0.044
0.084
Min
1.02
5.97
8.89
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
1.06
0.86
0.86
1.86
Max
1.27
6.22
9.53
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
1.32
1.11
E
H
J
5.28
.208
Anode
A
D
A
B
C
D
E
F
0.040
0.235
0.350
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.042
0.034
0.034
0.074
0.044
0.242
0.361
0.208
0.262
0.031
0.090
0.092
0.180
0.020
0.040
0.020
0.047
0.039
0.039
0.079
1.11
6.15
9.18
5.29
6.66
0.80
2.28
2.34
4.57
0.51
1.01
5.34
.210
B
R
P
Q
S
G
H
I
K
C
J
K
L
Cathode
L
F
0.52
1.20
Anode
GATE
G
P
Q
R
S
I
1.00
1.00
1.11
2.00
2.11
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
6.71
.264
Anode
5.28
.208
TC MEASURING POINT
D
Inches
Typ
Millimeters
Typ
Dimension
Min
0.040
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.038
0.018
0.000
0.021
0°
Max
0.050
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.044
0.023
0.004
0.027
5°
Min
1.02
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.97
0.46
0.00
0.53
0°
Max
1.27
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.12
0.58
0.10
0.69
5°
A
B
6.71
.264
5.34
.210
A
B
C
D
E
F
0.043
0.243
0.108
0.208
0.262
0.031
0.090
0.092
0.179
0.020
0.040
0.020
0.000
0.026
0°
1.09
6.16
2.74
1.60
.063
P
Q
C
1.80
.071
5.29
6.65
0.80
2.28
2.33
4.55
0.51
1.02
GATE
F
AREA: 0.040 IN2
Cathode
Anode
3
.118
4.60
.181
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
0.51
0.00
0.67
0°
M
N
O
P
Q
0.042
0.034
0.047
0.039
0.052
0.044
1.06
0.86
1.20
1.32
1.11
1.00
©2012 Littelfuse, Inc
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Sxx06xSx & Sxx06x Series
225
Revised: April 24, 2012 04:02 PM
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
ANODE
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
226
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Teccor® brandThyristors
6 Amp Sensitive & Standard SCRs
Packing Options
Part Number
Sxx06L/Ryy
Sxx06L/RyyTP
Sxx06DyyTP
Sxx06DyyRP
Sxx06VyyTP
Sxx06L/R
Marking
Sxx06L/Ryy
Sxx06L/Ryy
Sxx06Dyy
Sxx06Dyy
Sxx06Vyy
Sxx06L/R
Sxx06L/R
Sxx06D
Weight
2.2 g
2.2 g
0.3 g
0.3 g
0.4 g
2.2 g
2.2 g
0.3 g
0.3 g
0.4 g
Packing Mode
Base Quantity
500
Bulk
Tube
500 (50 per tube)
750 (75 per tube)
2500
Tube
Embossed Carrier
Tube
750 (75 per tube)
500
Bulk
Sxx06L/RTP
Sxx06DTP
Tube
500 (50 per tube)
750 (75 per tube)
2500
Tube
Sxx06DRP
Sxx06D
Embossed Carrier
Tube
Sxx06VTP
Sxx06V
750 (75 per tube)
Note: xx = Voltage; yy = Sensitivity
TO-252 Embossed Carrier Reel Pack (RP) Specs
Meets all EIA-481-2 Standards
Part Marking System
TO-251AA – (V Package)
TO-252AA – (D Package)
0.059
(1.5)
0.157
(4.0)
DIA
Gate
Cathode
S6006RS2
Y
M
®
0.63
(16.0)
0.524
(13.3)
*
0.315
(8.0)
*
Cover tape
Anode
S6006LS2
MY
®
12.99
(330.0)
0.512 (13.0)
Arbor Hole
Diameter
Dimensions
are in inches
(and millimeters).
Part Numbering System
0.64
(16.3)
S 60 06 L S2 56
Direction of Feed
DEVICE TYPE
LEAD FORM DIMENSIONS
xx: Lead Form Option
S: SCR
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200µA
S3: 500µA
Standard SCR:
(blank): 15mA
CURRENT RATING
06: 6A
PACKAGE TYPE
L: TO-220 Isolated
R: TO-220 Non-Isolated
V: TO-251 (V/I-Pak)
D: TO-252 (D-Pak)
©2012 Littelfuse, Inc
Sxx06xSx & Sxx06x Series
227
Revised: April 24, 2012 04:02 PM
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
相关型号:
S8006RTP
Silicon Controlled Rectifier, 6A I(T)RMS, 6000mA I(T), 800V V(DRM), 800V V(RRM), 1 Element, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3
LITTELFUSE
S8006VTP
Silicon Controlled Rectifier, 6A I(T)RMS, 6000mA I(T), 800V V(DRM), 800V V(RRM), 1 Element, TO-251AA, ROHS COMPLIANT, PLASTIC, V/IPAK-3
LITTELFUSE
S8008D56
Silicon Controlled Rectifier, 8A I(T)RMS, 800V V(DRM), 800V V(RRM), 1 Element, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明