S8006RTP [LITTELFUSE]
Silicon Controlled Rectifier, 6A I(T)RMS, 6000mA I(T), 800V V(DRM), 800V V(RRM), 1 Element, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3;型号: | S8006RTP |
厂家: | LITTELFUSE |
描述: | Silicon Controlled Rectifier, 6A I(T)RMS, 6000mA I(T), 800V V(DRM), 800V V(RRM), 1 Element, TO-220AB, ROHS COMPLIANT, PLASTIC PACKAGE-3 局域网 栅 栅极 |
文件: | 总14页 (文件大小:910K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thyristors
6 Amp Sensitive & Standard SCRs
RoHS
Sxx06xSx & Sxx06x Series
Description
This Sxx06x SCR series is ideal for uni-directional switch
applications such as phase control, heating, motor speed
controls, converters/rectifiers and capacitive discharge
ignitions.
These SCRs have a low gate current trigger level of 0.2 to
15 mA at approximately 1.5V, with a sensitive version of
this series having a gate trigger current less than 500µA.
The sensitive gate SCR version is easily triggered by sense
coils, proximity switches, and microprocessors.
Features & Benefits
• Halogen free and
RoHS compliant
• Surge capability up to
100 A at 60 Hz half cycle
• Glass – passivated
junctions
• L-Package is UL
recognized for 2500Vrms
Agency Approval
• Voltage capability up
to 1000 V
Agency
Agency File Number
L Package: E71639
Applications
Typical applications are capacitive discharge systems for
strobe lights, nailers, staplers and gas engine ignition. Also,
AC control & rectification for power tools, home/brown
goods and white goods appliances and 2-wheeler rectifier/
battery regulators.
Main Features
Symbol
IT(RMS)
Value
Unit
A
6
Internally constructed isolated packages are offered for
ease of heat sinking with highest isolation voltage.
VDRM/VRRM
IGT
400 to 1000
0.2 to 15
V
mA
Schematic Symbol
Additional Information
ꢀ
ꢁ
ꢀꢁtꢁshꢂꢂt
ꢀꢁsoꢂrꢃꢁs
ꢀꢁꢂꢃꢄꢅs
ꢂ
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Absolute Maximum Ratings — Sensitive SCRs
Symbol
Parameter
Test Conditions
Value
Unit
Sxx06LSy
TC = 80°C
TC = 95°C
TC = 80°C
TC = 95°C
Sxx06NSy
Sxx06RSy
Sxx06DSy
Sxx06VSy
IT(RMS)
RMS on-state current
6
A
Sxx06LSy
Sxx06NSy
Sxx06RSy
Sxx06DSy
Sxx06VSy
IT(AV)
Average on-state current
3.8
A
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
I2t
di/dt
IGTM
PG(AV)
Tstg
TJ
I2t Value for fusing
Critical rate of rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60Hz; TJ = 110°C
TJ = 110°C
41
100
A2s
A/μs
A
1
Average gate power dissipation
Storage temperature range
0.1
W
TJ = 110°C
-40 to 150
-40 to 110
°C
Operating junction temperature range
°C
Note: xx = voltage, y = sensitivity
Absolute Maximum Ratings — Standard SCRs
Symbol
Parameter
Value
Unit
Sxx06L
TC = 100°C
Sxx06N
Sxx06R
Sxx06D
Sxx06V
IT(RMS)
RMS on-state current
6
A
TC = 110°C
TC = 100°C
TC = 110°C
Sxx06L
Sxx06N
Sxx06R
Sxx06D
Sxx06V
IT(AV)
Average on-state current
3.8
A
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
83
ITSM
Peak non-repetitive surge current
single half cycle; f = 60Hz;
TJ (initial) = 25°C
100
I2t
di/dt
IGTM
PG(AV)
Tstg
TJ
I2t value for fusing
Critical rate-of-rise of on-state current
Peak gate current
tp = 8.3 ms
f = 60Hz;TJ =125°C
TJ = 125°C
41
100
A2s
A/μs
A
2
Average gate power dissipation
Storage temperature range
0.5
W
TJ = 125°C
-40 to 150
-40 to 125
°C
Operating junction temperature range
°C
Note: xx = voltage
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Sensitive SCRs
Value
Symbol
Test Conditions
Unit
Sxx06xS2
Sxx06xS3
IGT
VD = 6V RL = 100 Ω
VD = 6V RL = 100 Ω
MAX.
MAX.
TYP.
200
500
μA
V
VGT
dv/dt
VGD
VGRM
IH
0.8
8
VD = VDRM; RGK = 1kΩ;TJ = 110°C
VD = VDRM RL = 3.3 kΩ TJ = 110°C
IGR = 10μA
V/μs
V
MIN.
MIN.
MAX.
MAX.
TYP.
0.2
6
V
IT = 20mA (initial)
6
50
4
8
45
5
mA
μs
μs
tq
IT = 2A; tp= 50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT PW = 15µs IT = 12A
tgt
Note: xx = voltage, x = package
Electrical Characteristics (TJ = 25°C, unless otherwise specified) — Standard SCRs
Symbol Test Conditions
IGT VD = 12V RL = 60 Ω
Value
Unit
Sxx06x
MAX.
15
mA
V
VGT
VD = 12V RL = 60 Ω
MAX.
1.5
350
300
250
100
250
225
200
0.2
30
400V
600V
800V
1000V
400V
600V
800V
VD = VDRM; gate open;TJ = 100°C
dv/dt
MIN.
V/μs
VD = VDRM; gate open;TJ = 125°C
VGD
IH
VD = VDRM RL = 3.3 kΩ TJ = 125°C
IT = 200mA (initial)
MIN.
MAX.
MAX.
TYP.
V
mA
μs
tq
IT = 2A; tp= 50µs; dv/dt=5V/µs; di/dt=-30A/µs
IG = 2 x IGT PW = 15µs IT = 12A
35
tgt
2
μs
Note: xx = voltage, x = package
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Static Characteristics
Symbol
Test Conditions
Value
1.6
Unit
VTM
IT = 12A; tp = 380 µs
MAX.
MAX.
V
TJ = 25°C
400 – 600V
400 – 600V
400 – 800V
1000V
5
Sxx06xyy
TJ = 110°C
250
10
TJ = 25°C
I
DRM / IRRM
VDRM = VRRM
20
μA
Sxx06x
400 – 800V
1000V
200
3000
500
TJ = 100°C
TJ = 125°C
400 – 800V
Note: xx = voltage, x = package, yy = sensitivity
Thermal Resistances
Symbol
Parameter
Value
2.6
4.3
2.4
1.8
2.5
4.0
2.3
1.7
40
Unit
Sxx06RSy / Sxx06NSy
Sxx06LSy
Sxx06VSy
Sxx06DSy
Sxx06R / Sxx06N
Sxx06L
Junction to case (AC)
°C/W
Rθ(J-C)
Sxx06V
Sxx06D
Sxx06RSy
Sxx06LSy
Sxx06VSy
Sxx06R
65
85
Junction to ambient
°C/W
Rθ(J-A)
40
Sxx06L
50
Sxx06V
70
Note: xx = voltage, y = sensitivity
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 1: Normalized DC GateTrigger Current
vs. JunctionTemperature (Sensitive SCR)
Figure 2: Normalized DC GateTrigger Current
vs. JunctionTemperature (Standard SCR)
4.0
4.0
3.0
2.0
1.0
0.0
3.0
2.0
1.0
0.0
85
125
-40
-15
10
35
60
110
-40
-15
85
10
35
60
110
JunctionTemperature (TJ) - (ºC)
JunctionTemperature (TJ) - (ºC)
Figure 3: Normalized DC GateTriggerVoltage
vs. JunctionTemperature
Figure 4: Normalized DC Holding Current
vs. JunctionTemperature
2.0
1.5
1.0
0.5
0.0
2.0
1.5
1.0
0.5
0.0
-40
-15
10
35
60
85
110
125
-40
-15
10
35
85
125
60
110
JunctionTemperature (TJ) - (ºC)
JunctionTemperature (TJ) - (ºC)
Figure 5: On-State Current vs. On-StateVoltage
(Typical)
Figure 6: Power Dissipation (Typical) vs. RMS On-State
Current
6
5
30
TJ= 25°C
25
20
15
10
5
4
3
2
1
0
0
0.7
1.3
1.6
0.8
0.9
1.0
1.2
1.4
1.5
1.1
0
1
2
3
4
5
6
Instantaneous On-State Voltage (vT) - Volts
RMS On-State Current [IT(RMS)] - (Amps)
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 7: Maximum Allowable CaseTemperature
vs. RMS On-State Current
Figure 8: Maximum Allowable CaseTemperature
vs. Average On-State Current
130
130
125
120
115
110
105
100
95
Sxx06R/Sxx06N
Sxx06D
Sxx06V
Sxx06R/Sxx06N
S
S
125
120
115
110
105
100
95
Sxx06D
Sxx06V
Sxx06RSy/
Sxx06NSy
Sxx06RSy/
Sxx06RSy
Sxx06NSy
Sxx06DSy
Sxx06VSy
Sxx06DSy
Sxx06L
Sxx06L
Sxx06LSy
90
90
CURRENTWAVEFORM: Sinsuoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
CURRENTWAVEFORM: Sinsuoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sx06LSy
85
85
80
80
0
1
2
3
4
5
6
7
0
1
2
3
4
RMS On-State Current [IT(RMS)] - Amps
Average On-State Current [IT(AVE)] - Amps
Figure 9: Maximum Allowable AmbientTemperature
vs. RMS On-State Current
Figure 10: Maximum Allowable AmbientTemperature
vs. Average On-State Current
120
120
CURRENT WAVEFORM: Sinusoidal
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
LOAD: Resistive or Inductive
Sxx06R
CONDUCTION ANGLE: 180°
FREE AIR RATING
CONDUCTION ANGLE: 180°
FREE AIR RATING
Sxx06R
100
100
80
60
40
20
0
Sxx06L
80
Sxx06L
Sxx06LSy
Sxx06RSy
Sxx06V
60
40
20
0
Sxx06RSy
Sxx06LSy
Sxx06V
Sxx06VSy
Sxx06VSy
0.0
0.5
1.0
1.5
0.0
0.5
1.0
1.5
2.0
2.5
RMS On-State Current [IT(RMS)] - Amps
Average On-State Current [IT(AVE)] - Amps
Note: xx = voltage, y = sensitivity
Figure 11: Peak Capacitor Discharge Current
Figure 12: Peak Capacitor Discharge Current Derating
1000
1.2
1.0
0.8
0.6
0.4
100
Standard SCR
Sensitive SCR
ITRM
0.2
0.0
tW
10
1.0
0.5
10.0
50.0
0
2 5
50
75
100
125
150
Pulse Current Duration (tw) - ms
CaseTemperature (TC) - ºC
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 13-1: Typical DC GateTrigger Current with RGK
vs. JunctionTemperature for S6008DS2
Figure 13-2: Typical DC GateTrigger Current with RGK
vs. JunctionTemperature for SS6008DS3
Figure 14-1: Typical DC Holding Current with RGK
vs. JunctionTemperature for S6008DS2
Figure 14-2 Typical DC Holding Current with RGK
vs. JunctionTemperature for SS6008DS3
Figure 15-1: Typical Static dv/dt with RGK vs. Junction
Temperature for S6008DS2
Figure 15-2 Typical Static dv/dt with RGK vs. Junction
Temperature for SS6008DS3
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Figure 16-1: Typical Static dv/dt with RGK vs. Junction
Figure 16-2 Typical Static dv/dt with RGK vs. Junction
Temperature for SS6008DS3
Temperature for S6008DS2
Figure 17: Surge Peak On-State Current vs. Number of Cycles
SUPPLY FREQUENCY: 60 Hz Sinusoidal
LOAD: Resistive
100
RMS On-State Current: [IT(RMS)]: Maximum Rated
Value at Specified Case Temperature
Notes:
1. Gate control may be lost during and immediately
following surge current interval.
2. Overload may not be repeated until junction
temperature has returned to steady-state
rated value.
10
1
1
10
100
1000
Surge Current Duration -- Full Cycles
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Soldering Parameters
Reflow Condition
Pb – Free assembly
tP
TP
-Temperature Min (Ts(min)
)
150°C
Ramp-up
TL
TS(max)
Pre Heat -Temperature Max (Ts(max)
)
200°C
tL
-Time (min to max) (ts)
60 – 180 secs
Ramp-down
Preheat
Average ramp up rate (LiquidusTemp)
(TL) to peak
5°C/second max
TS(min)
tS
TS(max) toTL - Ramp-up Rate
5°C/second max
217°C
-Temperature (TL) (Liquidus)
Reflow
25
time to peak temperature
-Temperature (tL)
60 – 150 seconds
260+0/-5 °C
Time
PeakTemperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
8 minutes Max.
280°C
Time 25°C to peakTemperature (TP)
Do not exceed
Physical Specifications
Terminal Finish
Body Material
Lead Material
100% MatteTin-plated
UL recognized epoxy meeting flammability
rating 94V-0
Copper Alloy
Design Considerations
Careful selection of the correct component for the
application’s operating parameters and environment will
go a long way toward extending the operating life of the
Thyristor. Good design practice should limit the maximum
continuous current through the main terminals to 75% of
the component rating. Other ways to ensure long life for
a power discrete semiconductor are proper heat sinking
and selection of voltage ratings for worst case conditions.
Overheating, overvoltage (including dv/dt), and surge
currents are the main killers of semiconductors. Correct
mounting, soldering, and forming of the leads also help
protect against component damage.
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Environmental Specifications
Test
AC Blocking
Specifications and Conditions
MIL-STD-750, M-1040, Cond A Applied
Peak AC voltage @ 125°C for 1008 hours
MIL-STD-750, M-1051,
100 cycles; -40°C to +150°C; 15-min
dwell-time
Temperature Cycling
EIA / JEDEC, JESD22-A101
1008 hours; 320V - DC: 85°C; 85%
rel humidity
Temperature/
Humidity
MIL-STD-750, M-1031,
1008 hours; 150°C
HighTemp Storage
Low-Temp Storage
1008 hours; -40°C
Resistance to
Solder Heat
MIL-STD-750 Method 2031
Solderability
Lead Bend
ANSI/J-STD-002, category 3, Test A
MIL-STD-750, M-2036 Cond E
Product Selector
Voltage
Part Number
Gate Sensitivity
Type
Package
400V
X
600V
X
800V
1000V
Sxx06RS2
Sxx06LS2
Sxx06VS2
Sxx06DS2
Sxx06RS3
Sxx06LS3
Sxx06VS3
Sxx06DS3
Sxx06R
0.2mA
0.2mA
0.2mA
0.2mA
0.5mA
0.5mA
0.5mA
0.5mA
15mA
15mA
15mA
15mA
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Sensitive SCR
Standard SCR
Standard SCR
Standard SCR
Standard SCR
TO-220R
TO-220L
TO-251
TO-252
TO-220R
TO-220L
TO-251
TO-252
TO-220R
TO-220L
TO-251
TO-252
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Sxx06L
X
X
Sxx06V
X
X
Sxx06D
X
X
Note: xx = voltage
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Dimensions —TO-251AA (V/I-Package) —V/I-PAKThrough Hole
TC MEASURING POINT
AREA: 0.040 IN2
Inches
Typ
Millimeters
Typ
Dimension
Min
Max
0.043
0.245
0.375
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.039
0.023
0.052
0.044
0.044
0.084
Min
0.94
5.97
8.89
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.90
0.46
1.06
0.86
0.86
1.86
Max
1.09
6.22
9.53
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.00
0.58
1.32
1.11
E
H
J
5.28
.208
Anode
A
D
A
B
C
D
E
F
0.037
0.235
0.350
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.035
0.018
0.042
0.034
0.034
0.074
0.040
0.242
0.361
0.208
0.262
0.031
0.090
0.092
0.180
0.020
0.037
0.020
0.047
0.039
0.039
0.079
1.01
6.15
9.18
5.29
6.66
0.80
2.28
2.34
4.57
0.51
0.95
0.52
1.20
5.34
.210
B
R
P
Q
S
G
H
I
K
C
J
K
L
Cathode
L
F
Anode
GATE
G
P
Q
R
S
I
1.00
1.00
1.11
2.00
2.11
Dimensions —TO-252AA (D-Package) — D-PAK Surface Mount
E
6.71
.264
Anode
5.28
.208
TC MEASURING POINT
D
Inches
Typ
Millimeters
Typ
Dimension
Min
0.037
0.235
0.106
0.205
0.255
0.027
0.087
0.085
0.176
0.018
0.035
0.018
0.000
0.021
0°
Max
0.043
0.245
0.113
0.213
0.265
0.033
0.093
0.095
0.184
0.023
0.039
0.023
0.004
0.027
5°
Min
0.94
5.97
2.69
5.21
6.48
0.69
2.21
2.16
4.47
0.46
0.90
0.46
0.00
0.53
0°
Max
1.09
6.22
2.87
5.41
6.73
0.84
2.36
2.41
4.67
0.58
1.00
0.58
0.10
0.69
5°
A
B
6.71
.264
5.34
.210
A
B
C
D
E
F
0.040
0.243
0.108
0.208
0.262
0.031
0.090
0.092
0.179
0.020
0.037
0.020
0.000
0.026
0°
1.01
6.16
2.74
1.60
.063
P
Q
C
1.80
.071
5.29
6.65
0.80
2.28
2.33
4.55
0.51
0.95
0.51
0.00
0.67
0°
GATE
F
AREA: 0.040 IN2
Cathode
Anode
3
.118
4.60
.181
G
I
G
H
I
L
O
H
K
J
M
N
J
K
L
M
N
O
P
Q
0.042
0.034
0.047
0.039
0.052
0.044
1.06
0.86
1.20
1.32
1.11
1.00
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Dimensions —TO-220AB (R-Package) — Non-Isolated MountingTab Common with Center Lead
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
Min
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
ANODE
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
B
C
13.36
.526
D
7. 01
.276
NOTCH IN
GATE LEAD
TO ID.
NON-ISOLATED
TAB
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
L
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
Dimensions —TO-220AB (L-Package) — Isolated MountingTab
T
C MEASURING POINT
AREA (REF.) 0.17 IN2
Inches
Millimeters
O
Dimension
8.13
.320
A
E
Min
Max
0.420
0.115
0.250
0.620
0.147
0.130
0.575
0.035
0.205
0.105
0.075
0.095
0.024
0.188
0.060
0.048
Min
9.65
2.67
5.84
14.99
3.61
2.79
13.72
0.64
4.95
2.41
1.52
Max
10.67
2.92
6.35
15.75
3.73
3.30
14.61
0.89
5.21
2.67
1.91
P
A
B
C
D
E
0.380
0.105
0.230
0.590
0.142
0.110
0.540
0.025
0.195
0.095
0.060
0.085
0.018
0.178
0.045
0.038
B
C
13.36
.526
D
7. 01
.276
F
F
G
H
J
R
G
L
H
K
CATHODE ANODE GATE
N
K
J
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
L
M
M
N
O
P
2.16
0.46
4.52
1.14
2.41
0.61
4.78
1.52
R
0.97
1.22
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
Dimensions —TO-263 (N Package) — D2Pak Surface Mount
Inches
Millimeters
Min
Dimension
Min
Max
0.370
0.420
0.188
0.035
0.060
0.075
0.105
0.102
0.024
0.110
0.625
0.045
0.010
0.070
Max
9.40
10.67
4.78
0.89
1.52
A
B
C
D
E
0.360
0.380
0.178
0.025
0.045
0.060
0.095
0.092
0.018
0.090
0.590
0.035
0.002
0.040
9.14
9.65
4.52
0.64
1.14
F
1.52
2.41
2.34
0.46
2.29
14.99
0.89
0.05
1.02
1.91
G
H
J
2.67
2.59
0.61
2.79
15.88
1.14
K
S
V
U
W
0.25
1.78
Packing Options
Part Number
Sxx06L/RyyTP
Sxx06DyyTP
Sxx06DyyRP
Sxx06VyyTP
Sxx06L/RTP
Sxx06DTP
Marking
Sxx06L/Ryy
Sxx06Dyy
Sxx06Dyy
Sxx06Vyy
Sxx06L/R
Sxx06D
Weight
2.2 g
0.3 g
0.3 g
0.4 g
2.2 g
0.3 g
Packing Mode
Base Quantity
Tube
Tube
500 (50 per tube)
750 (75 per tube)
2500
Embossed Carrier
Tube
750 (75 per tube)
500 (50 per tube)
750 (75 per tube)
Tube
Tube
Sxx06DRP
Sxx06D
Sxx06V
Sxx6Nyy
Sxx6Nyy
Sxx6N
0.3 g
0.4 g
1.6g
1.6g
1.6g
1.6g
Embossed Carrier
Tube
2500
750 (75 per tube)
500
Sxx06VTP
Sxx06NyyRP
Embossed Carrier
Tube
Sxx06NyyTP
500 (50 per tube)
500
Sxx06NRP
Embossed Carrier
Tube
Sxx06NTP
Sxx6N
500 (50 per tube)
Note: xx = Voltage/10; yy = Sensitivity
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
Thyristors
6 Amp Sensitive & Standard SCRs
TO-252 Embossed Carrier Reel Pack (RP) Specs
Meets all EIA-481-2 Standards
Part Marking System
TO-251AA- (V Package)
TO-252AA- (D Package)
0.059
(1.5)
0.157
(4.0)
DIA
Gate
Cathode
S6006DS2
S6006DS2
0.63
(16.0)
0.524
(13.3)
*
YMLDD
YMLDD
®
®
Date Code Marking
Y:Year Code
M: Month Code
L: Location Code
DD: Calendar Code
TO-263 AA (N Package)
TO-220 AB - (L and R Package)
0.315
(8.0)
*
Cover tape
Anode
12.99
(330.0)
0.512 (13.0)
Arbor Hole
Diameter
Dimensions
are in inches
(and millimeters).
S6006RS2
M
Y
®
0.64
(16.3)
Date Code Marking
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Direction of Feed
Part Numbering System
S 60 06 L S2 56
COMPONENT
S: SCR
LEAD FORM DIMENSIONS
xx: Lead Form Option
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
SENSITIVITY & TYPE
Sensitive SCR:
S2: 200µA
S3: 500µA
Standard SCR:
(blank): 15mA
CURRENT RATING
06: 6A
PACKAGE TYPE
L: TO-220 Isolated
R: TO-220 Non-Isolated
V: TO-251 (V/I-Pak)
D: TO-252 (D-Pak)
N: TO-263 (D2-Pak)
© 2018 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 01/16/18
相关型号:
S8006VTP
Silicon Controlled Rectifier, 6A I(T)RMS, 6000mA I(T), 800V V(DRM), 800V V(RRM), 1 Element, TO-251AA, ROHS COMPLIANT, PLASTIC, V/IPAK-3
LITTELFUSE
S8008D56
Silicon Controlled Rectifier, 8A I(T)RMS, 800V V(DRM), 800V V(RRM), 1 Element, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
LITTELFUSE
S8008D56RP
Silicon Controlled Rectifier, 8A I(T)RMS, 800V V(DRM), 800V V(RRM), 1 Element, TO-252AA, ROHS COMPLIANT, PLASTIC, DPAK-3
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明