CLP0212FPEX5Z01A [LINEAGEPOWER]
90 - 264Vac input; 12Vdc output; 200W Output Power;型号: | CLP0212FPEX5Z01A |
厂家: | LINEAGE POWER CORPORATION |
描述: | 90 - 264Vac input; 12Vdc output; 200W Output Power |
文件: | 总15页 (文件大小:1475K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Features
•
Compact size 50.8 mm x 101.6 mm x 36.1 mm
(2 in x 4 in x 1.4 in) with density of 18W/in3
•
•
•
•
•
•
Universal AC Input Range (90 – 264VAC)
Output voltage of 12V (adjustable ±5%)
Maximum output current of 16.7A@ 12Vout (200W)
Standby output of 5V or 3.3V @ 0.25A
High efficiency with 80 PLUS® Gold Certification
Full load capability at 50ºC and 1m/s (200LFM) airflow
with derating at higher temperatures or lower airflows
•
•
•
•
•
•
Remote ON/OFF
Output overcurrent protection (non-latching)
Overtemperature protection
Output overvoltage protection
Up to 12ms of holdup time
Parallellable with current sharing
Active power factor corrected input
•
Applications
•
Conducted EMI - meets CISPR22 (EN55022) and FCC
Class A requirements
•
•
•
•
Telecommunications equipment
Embedded Computing
Storage Systems
•
•
Compliant to RoHS EU Directive 2002/95/EC
UL and cUL approved to UL/CSA60950-1, TUV
(EN60950-1), CE Mark (for LVD) and CB Report available
Industrial equipment
•
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
In a small 2 x 4 inch footprint, the 12Vdc single-output CLP0212 open frame power supply delivers 80 PLUS Gold energ
efficiency. With its small size, the CLP series is specifically designed to handle power challenges associated with tight
Offeringa leading 18W/in3 power density in a 1U high, fan- less form factor
space and low airflow the CLP series addresses a
y
.
,
broad range of applications in new products from communications, computing and data storage original equipment
manufacturers (OEMs). It delivers greater than 90 percent typical power efficiency and full load output at +50˚C (122˚F) with
higher temperature operation possible at derated output
leveraging zero oltage switching techniques in conjunction with quasi-resonant power factor correction (PFC) circuits.
Protection features include overcurrent (OCP), overvoltage (OVP), and overtemperatur
. The CLP series utilizes a unique design approach at this power level,
v
e
(OTP).
*
UL is a registered trademark of Underwriters Laboratories, Inc.
CSA is a registered trademark of Canadian Standards Association.
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
†
‡
** ISO is a registered trademark of the International Organization of Standards
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings
only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations
sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.
Parameter
Device
All
Min
90
Max
264
70
Unit
Vac
°C
Input Voltage - Continuous
Operating Ambient Temperature
All
-25
(see Thermal Considerations section)
CLP0212FPEX5Z01A
-40‡
-40‡
70
°C
°C
CLP0212FPEXZ02A
CLP0212FPEX5Z03A
85*
(in sealed enclosure applications with thermally conductive pad to
enclosure, PO,max = 65W)
CLP0212FPEX5Z02A
CLP0212FPEX5Z03A
-40
-40
55†
55†
°C
°C
(in sealed enclosure applications with thermally conductive pad to
enclosure, PO,max = 110W)
Storage Temperature
Humidity (non-condensing)
Altitude
All
All
All
-40
5
85
95
°C
%
m
4000
‡ Startup at -40ºC is limited to 80% of maximum load (160W) for all versions, except the CLP0212FPEXZ02A which can start up at full load.
* Unit is capable of operation up to 85ºC ambient for brief periods of time provided humidity is kept below 40%. Sustained
operation at 85ºC when input voltage is above 230VAC and output power loading is at or near the maximum rated value can
degrade reliability of the product.
† Ambient temperature outside the sealed enclosure containing the power supply.
Electrical Specifications
Parameter
Device
All
Min
90
Typ
Max
264
63
Unit
Vac
Hz
Operating Input Voltage
Input Source Frequency
115/230
50/60
All
47
All versions except
CLP0212FPEXZ02A
CLP0212FPEXZ02A
Input Current (VIN = 90Vac)
4
ARMS
ARMS
1.6
Input Power Factor
All
All
All
All
0.95
12
Inrush Transient Current (VIN = 264Vac, Tamb = 25ºC)
Leakage Current to earth ground (VIN = 264Vac)
Output Voltage Setpoint
100
2
A Peak
mA
Vdc
Output Voltage Tolerance (due to set point, temperature variations,
load and line regulation)
All
-2
2
%
Output Voltage Adjustment Range
Output Remote Sense Range
Output Load Regulation
All
All
All
All
11.4
12.6
250
1.5
Vdc
mVdc
%Vout
%Vout
Output Line Regulation
0.5
Output Ripple and Noise – measured with 0.1µF ceramic capacitor in
parallel with 10µF tantalum capacitor, at 25°C1
Peak-to-peak (20MHz Bandwidth)
All
180
mV p-p
Dynamic Load Response – 50% to 75% load transient, 0.1A/µs slew
rate
Output voltage deviation
All
5%
%
Settling Time
All
500
µs
All versions except
CLP0212FPEXZ02A
Output Current
0
0
16.7
8.34
Adc
Output Current
CLP0212FPEXZ02A
All
Adc
Output Current Limit Inception
115
% IO,max
1 Output ripple is 300mV p-p maximum at -40°C. To reduce further, additional external capacitance needed.
October 11, 2013 ©2012 General Electric Corporation. All rights reserved.
Page 2
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Electrical Specifications (cont.)
Parameter
Device
Min
Typ
Max
Unit
Maximum Output Capacitance
All
5000
µF
CLP0212FPXX5Z01A
CLP0212FPEX5Z01A
Standby Output Voltage
5
Vdc
CLP0212FPXX3Z01A
All
3.3
Vdc
Adc
%
Standby Output Current
Efficiency: VIN = 230Vac, 20% load
50% load
0.25
All except ..Z02A
All except ..Z02A
All except ..Z02A
All except ..Z02A
All except ..Z02A
All except ..Z02A
86.8
91.1
89.5
89.2
90.3
87.1
%
100% load
%
VIN = 115Vac, 20% load
50% load
%
%
100% load
%
Holdup Time – VIN = 115Vac, 100% load2
All except ..Z02A
CLP0212FPEXZ02A
10
45
ms
ms
65W load for CLP0212FPEXZ02A
VIN = 230Vac, 100% load
65W load for CLP0212FPEXZ02A
All except ..Z02A
CLP0212FPEXZ02A
10
45
Isolation Specifications
Parameter
Device
Min
Max
Unit
Isolation Voltage – Input to output
3000
1500
50
Vac
Vac
Vac
All
All
All
Input to safety ground
Outputs to safety ground
General Specifications
Parameter
Device
Symbol
Typ.
Unit
FIT
1,011.9
109/Hours
Calculated Reliability based on Telcordia SR-332 Issue 2: Method 1 Case
3 (VIN=230Vac, Io = 16.7A, TA = 40ºC, airflow 200LFM, 90% confidence)
All
MTBF
988,276
Hours
185
6.5
g
oz.
Weight
All
Feature Specifications
Parameter
Device
Min
Typ
Max
Unit
On/Off Signal Interface – signal referenced to GND
Logic Low (Power Supply ON)
Input Low Current
All
All
7
1
mA
V
Input Low Voltage
Logic High (Power Supply OFF)
Input High Current
All
All
All
All
All
All
All
All
600
5.5
50
µA
V
Input Voltage
Delay from ON/OFF being enabled to start of output voltage rise
Output Voltage Rise Time (from 10 to 90% of final value)
Delay from Input being applied to standby output being in regulation
Delay from Input being applied to all outputs being in regulation
Output Holdup time (from loss of AC to output being out of regulation)
Output Overvoltage Protection (for main output currents above 0.1A)
ms
ms
ms
ms
ms
Vdc
5
12
30
10
13.8
18
2
Holdup time is reduced at cold temperatures
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 3
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Feature Specifications (cont.)
Parameter
Device
Min
Typ
Max
Unit
Input Undervoltage lockout3
Turn-on Threshold (100% load)
Turn-off Threshold (100% load)
DC OK – open collector, High when output available
Sink Current
All
All
86
82
Vac
Vac
All
All
4
mA
V
Maximum Collector Voltage
12
Environmental Specifications
Parameter
Device
All
Specification
Conducted Emissions
Input Harmonics
CISPR22 (EN55022) Class A with 3dB margin
EN61000-3-2
All
ESD
All
IEC 61000-4-2, Level 3
Radiated Immunity
Electrical Fast Transient Common Mode
Surge Immunity
All
IEC 61000-4-3, Level 2*
IEC 61000-4-4, Level 3
All
All
IEC 61000-4-5, Level 3
Conducted RF Immunity
Voltage Dips
All
IEC 61000-4-6, Level 3
All
EN61000 4.11, Level 3, Class B, C
Shock and Vibration
Operating Shock
All
All
Three shocks, 15G peak, 11ms sine wave, two axes
Three shocks, 50G peak, 11ms sine wave, two axes
Non-Operating Shock
5 – 9Hz, 0.5” double amplitude, 2G Peak, 0.5 oct./min., 2 cycles
9-500Hz, 4G pk-pk, 0.5 oct/min., 2 cycles
Operating and Non-Operating Vibration
All
* Radiated immunity is met when the power supply is tested in a suitable enclosure.
3 The undervoltage lockout thresholds vary with output load current level – decreasing as the load goes down
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 4
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Characteristic Curves
The following figures provide typical characteristics for CLP0212 power supply
20
15
10
5
94
92
90
88
86
84
82
80
2m/s
(400LFM)
Vin=115VAC
Vin=230VAC
0.5m/s
(100LFM)
1m/s
200LFM
(
)
NC
0
0
2
4
6
8
10
12
14
16
18
30
35
40
45
50
55
60
65
70
OUTPUT LOAD %
AMBIENT TEMPERATURE, TA OC
Figure 2. Derating Output Current versus Ambient
Temperature and Airflow. Data shown for 115VAC in, at
Figure 1. Power Supply Efficiency versus Output Current.
230VAC in derating is the same or better. For derating at
other input voltages, consult the GE Technical
representative.
TIME, t (10ms/div)
TIME, t (5ms /div)
Figure 3. Typical output ripple and noise (VIN = 230Vac,
100% load ).
Figure 4. Transient Response to Dynamic Load Change from
50% to 100% at Vin = 230Vac.
TIME, t (10ms/div)
TIME, t (10ms/div)
Figure 5. Typical Start-up (VIN = 115Vac).
Figure 6. Typical Start-up (VIN = 230Vac)
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 5
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Characteristic Curves (cont.)
The following figures provide typical characteristics for CLP0212 power supply
TIME, t (10ms/div)
TIME, t (10ms/div)
Figure 7. Typical Hold-up waveforms (VIN = 115V, 100%
load).
Figure 8. Typical Hold-up waveforms (VIN = 230V, 100% load).
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 6
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Output Voltage Adjustment
Safety Considerations
The CLP0212 power supply is intended for inclusion in other
equipment and the installer must ensure that it is in
compliance with all the requirements of the end application.
This product is only for inclusion by professional installers
within other equipment and must not be operated as a
stand-alone product
IEC60950, EN60950, with the following deviations: Nemko
. The power supply meets Class 1,
Potentiometer
.
UL
60950 (Recognized Component) C-UL (Canadian Approvalby
UL).
Feature Descriptions
Fig. 10. Diagram showing location of the potentiometer
used to adjust the power supply output voltage.
Standby Power Supply
A standby output in the CLP0212 power supply of either 3.3
or 5V, comes on when AC input in the operating range is
applied. In the Z02A and Z03A versions of the power supply,
the standby output is not accessible.
The output voltage can be adjusted between 11.4V and 12.6V
using a potentiometer on the power supply. See Fig. 10 for a
diagram showing location of the potentiometer.
Remote Sense
Remote On/Off
The power supply has both positive and negative remote
sense connections that can be connected to the positive
and negative rails of the main output near the load. Care
should be taken in routing the sense lines to ensure that
noise is not picked up or that additional filtering elements
that affect the stability of the power supply are not used.
The power supply will operate without the remote sense
connections being made, however if remote sense near the
load is not used it is recommended that the remote sense
lines be connected directly to the main output terminals.
All versions of the CLP0212 power supply except the Z02A
and Z03A versions feature a TTL-compatible On/Off control
input. The power supply turns ON when the On/Off input
goes low, and turns OFF when the input goes high. Note
that if the On/Off pin is left unconnected, the power supply
main output remains off.
Figure 9 shows the circuit configuration for using the On/Off
pin. Either a suitable semiconductor device such as a BJT or
FET or a mechanical switch can be used to turn the power
supply On and Off. The switch must be capable of handling
the On/Off pin current which may be up to 6mA when
closed. The switch On voltage drop must also be sufficiently
small so that the photo diode inside the power supply is
turned ON when the external switch is ON.
Overcurrent Protection
To provide protection in a fault condition (output overload), the
power supply is equipped with internal current-limiting
circuitry and can endure current limiting continuously. At the
point of current-limit inception, the unit enters hiccup mode.
The power supply operates normally once the output current is
brought back into its specified range.
Note that the standby output voltage could be either 3.3V or
5V depending on the CLP0212 power supply variant
selected. If no On/Off control is desired, the On/Off pin can
be externally connected to the COM pin and the power
supply will automatically turn ON when AC input is within
range.
Overvoltage Protection
Overvoltage protection is a feature of the CLP0212 power
supply that protects both the load and the power supply from
an output overvoltage condition. When an overvoltage occurs,
the power supply shuts down and goes into hiccup mode until
the overvoltage condition is removed. It is not necessary to
recycle the input to restart the power supply when this
protection is activated.
CLP POWER SUPPLY
STANDBY OUTPUT
3.65K
1K
Overtemperature Protection
The CLP0212 also features overtemperature protection in
order to provide additional protection in a fault condition. The
power supply is equipped with a thermal shutdown circuit
which detects excessive internal temperatures and shuts the
unit down. Once the power supply goes into overtemperature
shutdown, it will cool before attempting to restart. The
overtemperature protection circuit will typically activate when
the unit is operated at 200W output with an ambient
temperature of 60ºC and 1m/s (200LFM) airflow.
ON/OFF
SWITCH
COM
Fig. 9. Schematic showing ON/OFF circuitry.
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 7
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Input Undervoltage Lockout
At input voltages below the input undervoltage lockout limit,
power supply operation is disabled. The power supply will
begin to operate at an input voltage above the undervoltage
lockout turn-on threshold. Note that the undervoltage lockout
limits are load dependent and the power supply turns ON and
can operate at much lower input voltage levels when at light
or no load.
DC OK
The CLP0212 provides a DC OK signal that indicates when
the output has come up and is in regulation. This is an open-
collector type signal that goes high when the output is
available and within regulation.
Fig. 11. Preferred airflow direction for cooling.
Operation In a Sealed Enclosure
Power Good LED
A green LED (located next to HDR3) illuminates when the main
output voltage is above 10V.
The CLP0212 power supply can also be operated in a sealed
enclosure provided proper means for removing heat from the
power supply are used. Figure 12 shows an arrangement
where a thermally conductive pad is used to transfer heat
from the bottom of the power supply into the enclosure. Under
such conditions, the power supply is capable of reduced power
operation as shown in Table 1.
Paralleling/Load Share
This power supply can be paralleled to provide larger load
currents than can be delivered from a single power supply. Up
to four power supplies may be paralleled. Paralleling is
accomplished by connecting the Current Share signals of
multiple power supplies together. At load current levels above
20%, the output currents of multiple power supplies will be
within ±5% of the full load value.
If remote sense is used when paralleling is employed, the
remote sense connection points should be common to both
power supplies.
For applications where redundancy among paralleled power
supplies is desired, ORing diodes or other active ORing circuitry
needs to be connected in series with each output.
Enclosure Wall
Thermal Considerations
Thermally Conductive Pad
The power supply can be operated in a variety of thermal
environments; however sufficient cooling should be provided
to ensure reliable operation.
Fig. 12. Example arrangement of the CLP0212 for sealed
enclosure applications.
Considerations include ambient temperature, airflow, power
supply dissipation and the need for increased reliability. A
reduction in the operating temperature of the power supply
will result in increased reliability. The thermal data presented
here is based on measurements taken in a wind tunnel.
Table 1. Output Power Capability when the CLP0212 is
operated in a sealed enclosure with thermal pad for
conduction cooling.
Ambient Temperature (ºC)
Max. Output Power (W)
25
40
55
170
150
110
Heat Transfer via Convection
Increased airflow through the power supply enhances the heat
transfer via convection. Figure 11 shows the preferred airflow
direction. Contact your GE Energy technical representative for
derating information in other airflow directions.
.
Note: Under Natural Convection cooling conditions, the
maximum load is restricted to 100W as OTP will be triggered
at higher loads.
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 8
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
EMI performance
All CLP0212 power supplies are specified to meet conducted Class A EMI requirements per CISPR 22 (EN55022) with at least 3dB of
margin. Results of tests conducted without any external filtering are shown below. These indicate 10dB or better of margin over
the Class A limits.
CLP0212FPXX5Z01A (120VAC in, 12V @ 180W out, Negative of Output Grounded)
CLP0212FPXX5Z01A (208VAC in, 12V @ 180W out, Negative of Output Grounded)
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 9
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
CLP0212FPEX5Z03A (120VAC in, 12V @ 180W out, Negative of Output Grounded)
CLP0212FPEX5Z03A (208VAC in, 12V @ 180W out, Negative of Output Grounded)
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 10
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Mechanical Outline (all except CLP0212…Z02A & CLP0212…Z03A versions)
Dimensions are in millimeters.
Tolerances: x.x mm ± 0.5mm [unless otherwise indicated]
x.xx mm ± 0.25mm
TOP VIEW
SIDE VIEW
3D-VIEW
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 11
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Mechanical Outline - CLP0212FPEXZ02A
Dimensions are in millimeters.
Tolerances: x.x mm ± 0.5mm [unless otherwise indicated]
x.xx mm ± 0.25mm
TOP VIEW
SIDE VIEW
3D-VIEW
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 12
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Mechanical Outline - CLP0212FPEX5Z03A
Dimensions are in millimeters.
Tolerances: x.x mm ± 0.5mm [unless otherwise indicated]
x.xx mm ± 0.25mm
TOP VIEW
SIDE VIEW
3D-VIEW
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 13
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Connector Information
Connector
Connector on Power Supply
5-1376382-1 from Tyco or equivalent
39-28-1043 from Molex or equivalent
53047-0810 from Molex or equivalent
Mating Connector
AC Input Connector (HDR1)
DC Output Connector (HDR2)
Signal Connector (HDR3)
1376388-1 from Tyco or equivalent
39-01-2040 from Molex or equivalent
51021-0800 from Molex or equivalent
Pinout Information
AC Input Connector (HDR1)
DC Input Connector (HDR2)
Signal Connector (HDR3)
Pin 1
Pin 2
Line
Pin 1
Pin 2
Pin 3
Pin 4
VO
Pin 1
Current Share
Neutral
VO
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
+S (Remote Sense +)
-S (Remote Sense -)
Remote On/Off
RTN
RTN
DC-OK (Output OK)
COM (Output Return)
COM (Output Return)
Standby Output
Note: Signal Connector HD3 is not present in the Z02A and Z03A versions.
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Page 14
Preliminary Data Sheet
GE
CLP0212 Open Frame Power Supply
90 - 264Vac input; 12Vdc output; 200W Output Power
Ordering Information
Please contact your Lineage Power Sales Representative for pricing, availability and optional features.
Table 2. Device Codes
Input
Output
Output
Standby
Supply
Temperature
Range
Device Code
On/Off Control
Comcode
Voltage Range Voltage Current
CLP0212FPXX5Z01A
CLP0212FPXX3Z01A
CLP0212FPEX5Z01A
CLP0212FPEXZ02A
CLP0212FPEX5Z03A
CLP0212FPXX5Z03A
90 – 264Vac
90 – 264Vac
90 – 264Vac
90 – 264Vac
90 – 264Vac
90 – 264Vac
12.0Vdc
12.0Vdc
12.0Vdc
12.0Vdc
12.0Vdc
12.0Vdc
16.7A
16.7A
16.7A
8.34A
16.7A
16.7A
Negative Logic
Negative Logic
Negative Logic
Absent
5V@0.25A
3.3V@0.25A
5V@0.25A
-25 to 70ºC
-25 to 70ºC
-40 to 70ºC
-40 to 70ºC
-40 to 70ºC
-25 to 70ºC
150032000
150032001
150032002
150032003
150032004
150032005
Not accessible
Not accessible
Not accessible
Absent
Absent
Contact Us
For more information, call us at
USA/Canada:
+1 888 546 3243, or +1 972 244 9288
Asia-Pacific:
+86.021.54279977*808
Europe, Middle-East and Africa:
+49.89.878067-280
India:
+91.80.28411633
www.gecriticalpower.com
October 11, 2013
©2012 General Electric Corporation. All rights reserved.
Version 1.26
相关型号:
©2020 ICPDF网 联系我们和版权申明