CLP0212FPXX5Z01A_技术文档

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Features

•

Compact size 50.8 mm x 101.6 mm x 36.1 mm

(2 in x 4 in x 1.4 in) with density of 18W/in³

•

Universal AC Input Range (90 – 264VAC)

Output voltage of 12V (adjustable ±5%)

Maximum output current of 16.7A@ 12Vout (200W)

Standby output of 5V or 3.3V @ 0.25A

High efficiency with 80 PLUS® Gold Certification

Full load capability at 50ºC and 1m/s (200LFM) airflow

with derating at higher temperatures or lower airflows

•

Remote ON/OFF

Output overcurrent protection (non-latching)

Overtemperature protection

Output overvoltage protection

Up to 12ms of holdup time

Parallellable with current sharing

Active power factor corrected input

•

Applications

•

Conducted EMI - meets CISPR22 (EN55022) and FCC

Class A requirements

•

Telecommunications equipment

Embedded Computing

Storage Systems

•

Compliant to RoHS EU Directive 2002/95/EC

UL and cUL approved to UL/CSA60950-1, TUV

(EN60950-1), CE Mark (for LVD) and CB Report available

Industrial equipment

•

ISO** 9001 and ISO 14001 certified manufacturing

facilities

Description

In a small 2 x 4 inch footprint, the 12Vdc single-output CLP0212 open frame power supply delivers 80 PLUS Gold energ

efficiency. With its small size, the CLP series is specifically designed to handle power challenges associated with tight

Offeringa leading 18W/in³power density in a 1U high, fan- less form factor

space and low airflow the CLP series addresses a

y

.

,

broad range of applications in new products from communications, computing and data storage original equipment

manufacturers (OEMs). It delivers greater than 90 percent typical power efficiency and full load output at +50˚C (122˚F) with

higher temperature operation possible at derated output

leveraging zero oltage switching techniques in conjunction with quasi-resonant power factor correction (PFC) circuits.

Protection features include overcurrent (OCP), overvoltage (OVP), and overtemperatur

. The CLP series utilizes a unique design approach at this power level,

v

e

(OTP).

*

UL is a registered trademark of Underwriters Laboratories, Inc.

CSA is a registered trademark of Canadian Standards Association.

VDE is a trademark of Verband Deutscher Elektrotechniker e.V.

†

‡

** ISO is a registered trademark of the International Organization of Standards

October 11, 2013

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings

only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations

sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter

Device

All

Min

90

Max

264

70

Unit

Vac

°C

Input Voltage - Continuous

Operating Ambient Temperature

All

-25

(see Thermal Considerations section)

CLP0212FPEX5Z01A

-40‡

70

°C

CLP0212FPEXZ02A

CLP0212FPEX5Z03A

85*

(in sealed enclosure applications with thermally conductive pad to

enclosure, P_O,max= 65W)

CLP0212FPEX5Z02A

CLP0212FPEX5Z03A

-40

55†

°C

(in sealed enclosure applications with thermally conductive pad to

enclosure, P_O,max= 110W)

Storage Temperature

Humidity (non-condensing)

Altitude

All

-40

5

85

95

°C

%

m

4000

‡ Startup at -40ºC is limited to 80% of maximum load (160W) for all versions, except the CLP0212FPEXZ02A which can start up at full load.

* Unit is capable of operation up to 85ºC ambient for brief periods of time provided humidity is kept below 40%. Sustained

operation at 85ºC when input voltage is above 230VAC and output power loading is at or near the maximum rated value can

degrade reliability of the product.

† Ambient temperature outside the sealed enclosure containing the power supply.

Electrical Specifications

Parameter

Device

All

Min

90

Typ

Max

264

63

Unit

Vac

Hz

Operating Input Voltage

Input Source Frequency

115/230

50/60

All

47

All versions except

CLP0212FPEXZ02A

Input Current (V_IN= 90Vac)

4

A_RMS

1.6

Input Power Factor

All

0.95

12

Inrush Transient Current (V_IN= 264Vac, T_amb= 25ºC)

Leakage Current to earth ground (V_IN= 264Vac)

Output Voltage Setpoint

100

2

A Peak

mA

Vdc

Output Voltage Tolerance (due to set point, temperature variations,

load and line regulation)

All

-2

2

%

Output Voltage Adjustment Range

Output Remote Sense Range

Output Load Regulation

All

11.4

12.6

250

1.5

Vdc

mVdc

%Vout

Output Line Regulation

0.5

Output Ripple and Noise – measured with 0.1µF ceramic capacitor in

parallel with 10µF tantalum capacitor, at 25°C¹

Peak-to-peak (20MHz Bandwidth)

All

180

mV p-p

Dynamic Load Response – 50% to 75% load transient, 0.1A/µs slew

rate

Output voltage deviation

All

5%

%

Settling Time

All

500

µs

All versions except

CLP0212FPEXZ02A

Output Current

0

16.7

8.34

Adc

Output Current

CLP0212FPEXZ02A

All

Adc

Output Current Limit Inception

115

% I_O,max

¹Output ripple is 300mV p-p maximum at -40°C. To reduce further, additional external capacitance needed.

Page 2

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Electrical Specifications (cont.)

Parameter

Device

Min

Typ

Max

Unit

Maximum Output Capacitance

All

5000

µF

CLP0212FPXX5Z01A

CLP0212FPEX5Z01A

Standby Output Voltage

5

Vdc

CLP0212FPXX3Z01A

All

3.3

Vdc

Adc

%

Standby Output Current

Efficiency: V_IN= 230Vac, 20% load

50% load

0.25

All except ..Z02A

86.8

91.1

89.5

89.2

90.3

87.1

%

100% load

%

V_IN= 115Vac, 20% load

50% load

%

100% load

%

Holdup Time – V_IN= 115Vac, 100% load²

All except ..Z02A

CLP0212FPEXZ02A

10

45

ms

65W load for CLP0212FPEXZ02A

V_IN= 230Vac, 100% load

65W load for CLP0212FPEXZ02A

All except ..Z02A

CLP0212FPEXZ02A

10

45

Isolation Specifications

Parameter

Device

Min

Max

Unit

Isolation Voltage – Input to output

3000

1500

50

Vac

All

Input to safety ground

Outputs to safety ground

General Specifications

Parameter

Device

Symbol

Typ.

Unit

FIT

1,011.9

10⁹/Hours

Calculated Reliability based on Telcordia SR-332 Issue 2: Method 1 Case

3 (V_IN=230Vac, I_o= 16.7A, T_A= 40ºC, airflow 200LFM, 90% confidence)

All

MTBF

988,276

Hours

185

6.5

g

oz.

Weight

All

Feature Specifications

Parameter

Device

Min

Typ

Max

Unit

On/Off Signal Interface – signal referenced to GND

Logic Low (Power Supply ON)

Input Low Current

All

7

1

mA

V

Input Low Voltage

Logic High (Power Supply OFF)

Input High Current

All

600

5.5

50

µA

V

Input Voltage

Delay from ON/OFF being enabled to start of output voltage rise

Output Voltage Rise Time (from 10 to 90% of final value)

Delay from Input being applied to standby output being in regulation

Delay from Input being applied to all outputs being in regulation

Output Holdup time (from loss of AC to output being out of regulation)

Output Overvoltage Protection (for main output currents above 0.1A)

ms

Vdc

5

12

30

10

13.8

18

2

Holdup time is reduced at cold temperatures

October 11, 2013

Page 3

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Feature Specifications (cont.)

Parameter

Device

Min

Typ

Max

Unit

Input Undervoltage lockout³

Turn-on Threshold (100% load)

Turn-off Threshold (100% load)

DC OK – open collector, High when output available

Sink Current

All

86

82

Vac

All

4

mA

V

Maximum Collector Voltage

12

Environmental Specifications

Parameter

Device

All

Specification

Conducted Emissions

Input Harmonics

CISPR22 (EN55022) Class A with 3dB margin

EN61000-3-2

All

ESD

All

IEC 61000-4-2, Level 3

Radiated Immunity

Electrical Fast Transient Common Mode

Surge Immunity

All

IEC 61000-4-3, Level 2*

IEC 61000-4-4, Level 3

All

IEC 61000-4-5, Level 3

Conducted RF Immunity

Voltage Dips

All

IEC 61000-4-6, Level 3

All

EN61000 4.11, Level 3, Class B, C

Shock and Vibration

Operating Shock

All

Three shocks, 15G peak, 11ms sine wave, two axes

Three shocks, 50G peak, 11ms sine wave, two axes

Non-Operating Shock

5 – 9Hz, 0.5” double amplitude, 2G Peak, 0.5 oct./min., 2 cycles

9-500Hz, 4G pk-pk, 0.5 oct/min., 2 cycles

Operating and Non-Operating Vibration

All

* Radiated immunity is met when the power supply is tested in a suitable enclosure.

³The undervoltage lockout thresholds vary with output load current level – decreasing as the load goes down

October 11, 2013

Page 4

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Characteristic Curves

The following figures provide typical characteristics for CLP0212 power supply

20

15

10

5

94

92

90

88

86

84

82

80

2m/s

(400LFM)

Vin=115VAC

Vin=230VAC

0.5m/s

(100LFM)

1m/s

200LFM

(

)

NC

0

2

4

6

8

10

12

14

16

18

30

35

40

45

50

55

60

65

70

OUTPUT LOAD %

AMBIENT TEMPERATURE, T_A^OC

Figure 2. Derating Output Current versus Ambient

Temperature and Airflow. Data shown for 115VAC in, at

Figure 1. Power Supply Efficiency versus Output Current.

230VAC in derating is the same or better. For derating at

other input voltages, consult the GE Technical

representative.

TIME, t (10ms/div)

TIME, t (5ms /div)

Figure 3. Typical output ripple and noise (VIN = 230Vac,

100% load ).

Figure 4. Transient Response to Dynamic Load Change from

50% to 100% at Vin = 230Vac.

TIME, t (10ms/div)

Figure 5. Typical Start-up (VIN = 115Vac).

Figure 6. Typical Start-up (VIN = 230Vac)

October 11, 2013

Page 5

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Characteristic Curves (cont.)

The following figures provide typical characteristics for CLP0212 power supply

TIME, t (10ms/div)

Figure 7. Typical Hold-up waveforms (VIN = 115V, 100%

load).

Figure 8. Typical Hold-up waveforms (VIN = 230V, 100% load).

October 11, 2013

Page 6

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Output Voltage Adjustment

Safety Considerations

The CLP0212 power supply is intended for inclusion in other

equipment and the installer must ensure that it is in

compliance with all the requirements of the end application.

This product is only for inclusion by professional installers

within other equipment and must not be operated as a

stand-alone product

IEC60950, EN60950, with the following deviations: Nemko

. The power supply meets Class 1,

Potentiometer

.

UL

60950 (Recognized Component) C-UL (Canadian Approvalby

UL).

Feature Descriptions

Fig. 10. Diagram showing location of the potentiometer

used to adjust the power supply output voltage.

Standby Power Supply

A standby output in the CLP0212 power supply of either 3.3

or 5V, comes on when AC input in the operating range is

applied. In the Z02A and Z03A versions of the power supply,

the standby output is not accessible.

The output voltage can be adjusted between 11.4V and 12.6V

using a potentiometer on the power supply. See Fig. 10 for a

diagram showing location of the potentiometer.

Remote Sense

Remote On/Off

The power supply has both positive and negative remote

sense connections that can be connected to the positive

and negative rails of the main output near the load. Care

should be taken in routing the sense lines to ensure that

noise is not picked up or that additional filtering elements

that affect the stability of the power supply are not used.

The power supply will operate without the remote sense

connections being made, however if remote sense near the

load is not used it is recommended that the remote sense

lines be connected directly to the main output terminals.

All versions of the CLP0212 power supply except the Z02A

and Z03A versions feature a TTL-compatible On/Off control

input. The power supply turns ON when the On/Off input

goes low, and turns OFF when the input goes high. Note

that if the On/Off pin is left unconnected, the power supply

main output remains off.

Figure 9 shows the circuit configuration for using the On/Off

pin. Either a suitable semiconductor device such as a BJT or

FET or a mechanical switch can be used to turn the power

supply On and Off. The switch must be capable of handling

the On/Off pin current which may be up to 6mA when

closed. The switch On voltage drop must also be sufficiently

small so that the photo diode inside the power supply is

turned ON when the external switch is ON.

Overcurrent Protection

To provide protection in a fault condition (output overload), the

power supply is equipped with internal current-limiting

circuitry and can endure current limiting continuously. At the

point of current-limit inception, the unit enters hiccup mode.

The power supply operates normally once the output current is

brought back into its specified range.

Note that the standby output voltage could be either 3.3V or

5V depending on the CLP0212 power supply variant

selected. If no On/Off control is desired, the On/Off pin can

be externally connected to the COM pin and the power

supply will automatically turn ON when AC input is within

range.

Overvoltage Protection

Overvoltage protection is a feature of the CLP0212 power

supply that protects both the load and the power supply from

an output overvoltage condition. When an overvoltage occurs,

the power supply shuts down and goes into hiccup mode until

the overvoltage condition is removed. It is not necessary to

recycle the input to restart the power supply when this

protection is activated.

CLP POWER SUPPLY

STANDBY OUTPUT

3.65K

1K

Overtemperature Protection

The CLP0212 also features overtemperature protection in

order to provide additional protection in a fault condition. The

power supply is equipped with a thermal shutdown circuit

which detects excessive internal temperatures and shuts the

unit down. Once the power supply goes into overtemperature

shutdown, it will cool before attempting to restart. The

overtemperature protection circuit will typically activate when

the unit is operated at 200W output with an ambient

temperature of 60ºC and 1m/s (200LFM) airflow.

ON/OFF

SWITCH

COM

Fig. 9. Schematic showing ON/OFF circuitry.

October 11, 2013

Page 7

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Input Undervoltage Lockout

At input voltages below the input undervoltage lockout limit,

power supply operation is disabled. The power supply will

begin to operate at an input voltage above the undervoltage

lockout turn-on threshold. Note that the undervoltage lockout

limits are load dependent and the power supply turns ON and

can operate at much lower input voltage levels when at light

or no load.

DC OK

The CLP0212 provides a DC OK signal that indicates when

the output has come up and is in regulation. This is an open-

collector type signal that goes high when the output is

available and within regulation.

Fig. 11. Preferred airflow direction for cooling.

Operation In a Sealed Enclosure

Power Good LED

A green LED (located next to HDR3) illuminates when the main

output voltage is above 10V.

The CLP0212 power supply can also be operated in a sealed

enclosure provided proper means for removing heat from the

power supply are used. Figure 12 shows an arrangement

where a thermally conductive pad is used to transfer heat

from the bottom of the power supply into the enclosure. Under

such conditions, the power supply is capable of reduced power

operation as shown in Table 1.

Paralleling/Load Share

This power supply can be paralleled to provide larger load

currents than can be delivered from a single power supply. Up

to four power supplies may be paralleled. Paralleling is

accomplished by connecting the Current Share signals of

multiple power supplies together. At load current levels above

20%, the output currents of multiple power supplies will be

within ±5% of the full load value.

If remote sense is used when paralleling is employed, the

remote sense connection points should be common to both

power supplies.

For applications where redundancy among paralleled power

supplies is desired, ORing diodes or other active ORing circuitry

needs to be connected in series with each output.

Enclosure Wall

Thermal Considerations

Thermally Conductive Pad

The power supply can be operated in a variety of thermal

environments; however sufficient cooling should be provided

to ensure reliable operation.

Fig. 12. Example arrangement of the CLP0212 for sealed

enclosure applications.

Considerations include ambient temperature, airflow, power

supply dissipation and the need for increased reliability. A

reduction in the operating temperature of the power supply

will result in increased reliability. The thermal data presented

here is based on measurements taken in a wind tunnel.

Table 1. Output Power Capability when the CLP0212 is

operated in a sealed enclosure with thermal pad for

conduction cooling.

Ambient Temperature (ºC)

Max. Output Power (W)

25

40

55

170

150

110

Heat Transfer via Convection

Increased airflow through the power supply enhances the heat

transfer via convection. Figure 11 shows the preferred airflow

direction. Contact your GE Energy technical representative for

derating information in other airflow directions.

.

Note: Under Natural Convection cooling conditions, the

maximum load is restricted to 100W as OTP will be triggered

at higher loads.

October 11, 2013

Page 8

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

EMI performance

All CLP0212 power supplies are specified to meet conducted Class A EMI requirements per CISPR 22 (EN55022) with at least 3dB of

margin. Results of tests conducted without any external filtering are shown below. These indicate 10dB or better of margin over

the Class A limits.

CLP0212FPXX5Z01A (120VAC in, 12V @ 180W out, Negative of Output Grounded)

CLP0212FPXX5Z01A (208VAC in, 12V @ 180W out, Negative of Output Grounded)

October 11, 2013

Page 9

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

CLP0212FPEX5Z03A (120VAC in, 12V @ 180W out, Negative of Output Grounded)

CLP0212FPEX5Z03A (208VAC in, 12V @ 180W out, Negative of Output Grounded)

October 11, 2013

Page 10

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Mechanical Outline (all except CLP0212…Z02A & CLP0212…Z03A versions)

Dimensions are in millimeters.

Tolerances: x.x mm ± 0.5mm [unless otherwise indicated]

x.xx mm ± 0.25mm

TOP VIEW

SIDE VIEW

3D-VIEW

October 11, 2013

Page 11

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Mechanical Outline - CLP0212FPEXZ02A

Dimensions are in millimeters.

Tolerances: x.x mm ± 0.5mm [unless otherwise indicated]

x.xx mm ± 0.25mm

TOP VIEW

SIDE VIEW

3D-VIEW

October 11, 2013

Page 12

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Mechanical Outline - CLP0212FPEX5Z03A

Dimensions are in millimeters.

Tolerances: x.x mm ± 0.5mm [unless otherwise indicated]

x.xx mm ± 0.25mm

TOP VIEW

SIDE VIEW

3D-VIEW

October 11, 2013

Page 13

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Connector Information

Connector

Connector on Power Supply

5-1376382-1 from Tyco or equivalent

39-28-1043 from Molex or equivalent

53047-0810 from Molex or equivalent

Mating Connector

AC Input Connector (HDR1)

DC Output Connector (HDR2)

Signal Connector (HDR3)

1376388-1 from Tyco or equivalent

39-01-2040 from Molex or equivalent

51021-0800 from Molex or equivalent

Pinout Information

AC Input Connector (HDR1)

DC Input Connector (HDR2)

Signal Connector (HDR3)

Pin 1

Pin 2

Line

Pin 1

Pin 2

Pin 3

Pin 4

VO

Pin 1

Current Share

Neutral

VO

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

+S (Remote Sense +)

-S (Remote Sense -)

Remote On/Off

RTN

DC-OK (Output OK)

COM (Output Return)

Standby Output

Note: Signal Connector HD3 is not present in the Z02A and Z03A versions.

October 11, 2013

Page 14

Preliminary Data Sheet

GE

CLP0212 Open Frame Power Supply

90 - 264Vac input; 12Vdc output; 200W Output Power

Ordering Information

Please contact your Lineage Power Sales Representative for pricing, availability and optional features.

Table 2. Device Codes

Input

Output

Standby

Supply

Temperature

Range

Device Code

On/Off Control

Comcode

Voltage Range Voltage Current

CLP0212FPXX5Z01A

CLP0212FPXX3Z01A

CLP0212FPEX5Z01A

CLP0212FPEXZ02A

CLP0212FPEX5Z03A

CLP0212FPXX5Z03A

90 – 264Vac

12.0Vdc

16.7A

8.34A

16.7A

Negative Logic

Absent

5V@0.25A

3.3V@0.25A

5V@0.25A

-25 to 70ºC

-40 to 70ºC

-25 to 70ºC

150032000

150032001

150032002

150032003

150032004

150032005

Not accessible

Absent

Contact Us

For more information, call us at

USA/Canada:

+1 888 546 3243, or +1 972 244 9288

Asia-Pacific:

+86.021.54279977*808

Europe, Middle-East and Africa:

+49.89.878067-280

India:

+91.80.28411633

www.gecriticalpower.com

October 11, 2013

Version 1.26


型号：	CLP0212FPXX5Z01A
厂家：	LINEAGE POWER CORPORATION
描述：	90 - 264Vac input; 12Vdc output; 200W Output Power
文件：	总15页 (文件大小：1475K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CLP0212FPXX5Z01A [LINEAGEPOWER]

相关型号：

CLP0212FPXX5Z03A

CLP04P040L28

CLP0608

CLP0917

CLP100-0010

CLP100-2110

CLP1000AA200

CLP1000AB200

CLP1000AC200

CLP1000AD200

CLP1000AE200

CLP1000AF200