KPT-2012ZGC [KINGBRIGHT]
2.2mm*1.25mm*0.75mm 0805 翠绿 SMD CHIP LED LAMP;型号: | KPT-2012ZGC |
厂家: | KINGBRIGHT CORPORATION |
描述: | 2.2mm*1.25mm*0.75mm 0805 翠绿 SMD CHIP LED LAMP |
文件: | 总5页 (文件大小:399K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2.0x1.25mm SMD CHIP LED LAMP
Part Number: KPT-2012ZGC
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 2.0mm x1.25mm SMT LED,0.75mm thickness.
z Low power consumption.
z The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
z Wide viewing angle.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF0706
APPROVED: WYNEC
REV NO: V.11B
DATE: NOV/04/2014
DRAWN: L.Q.Xie
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203003552
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
KPT-2012ZGC
Notes:
Green (InGaN)
Water Clear
200
400
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Green
Green
Green
Green
Gre
een
Typ.
515
525
30
Max.
Units
Test Conditions
IF=20mA
m
nm
nm
pF
V
IF=20mA
IF=20mA
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
3.3
4.1
50
Reverse Current
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
3.Wavelength value is traceae the CIE1-200compliant national standards.
4.Excess driving current and/ong temrature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
102.5
25
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF0706
APPROVED: WYNEC
REV NO: V.11B
CHECKED: Allen Liu
DATE: NOV/04/2014
DRAWN: L.Q.Xie
PAGE: 2 OF 5
ERP: 1203003552
Green
KPT-2012ZGC
SPEC NO: DSAF0706
APPROVED: WYNEC
REV NO: V.11B
DATE: NOV/04/2014
DRAWN: L.Q.Xie
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1203003552
KPT-2012ZGC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
SPEC NO: DSAF0706
APPROVED: WYNEC
REV NO: V.11B
DATE: NOV/04/2014
DRAWN: L.Q.Xie
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203003552
PACKING & LABEL SPECIFICATIONS
KPT-2012ZGC
Terms and conditions for the usage of this document
1.The information included in this document reflects representative usage scenarios and is intended
for technical reference only.
2.The part number, type, and specifications mentioned in this document are subject to future change
and improvement without notice. Before production usage customer should refer to the latest
datasheet for the updated specifications.
3.When using the products referenced in this document, please make sure the product is being
operated within the environmental and electrical limits specified in the datasheet. If customer usage
exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4.The information in this document applies to typical usage in consumer electronics applications.
If customer's application has special reliability requirements or have life-threatening liabilities,
such as automotive or medical usage, please consult with Kingbright representative for further
assistance.
5.The contents and information of this document may not be reproduced or re-transmitted without
permission by Kingbright.
6.All design applications should refer to Kingbright application notes available at
http://www.kingbright.com/application_notes
SPEC NO: DSAF0706
APPROVED: WYNEC
REV NO: V.11B
DATE: NOV/04/2014
DRAWN: L.Q.Xie
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203003552
相关型号:
KPT-2012ZGC-G
SINGLE COLOR LED, GREEN, 1.3mm, 2 X 1.25 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
KPT-3216MBCK
Single Color LED, Blue, Water Clear, 2mm, 3.20 X 1.60 MM, 0.75 MM HEIGHT, SUPER THIN, 1206, 2 PIN
KINGBRIGHT
KPT-3216MGC
Single Color LED, Mega Green, Water Clear, 1.2mm, 3.20 X 1.60 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明