KPT-3216CGCK [KINGBRIGHT]
3.2*1.6*0.75mm SMD LED kingbright 今台;型号: | KPT-3216CGCK |
厂家: | KINGBRIGHT CORPORATION |
描述: | 3.2*1.6*0.75mm SMD LED kingbright 今台 可见光LED 光电 PC |
文件: | 总5页 (文件大小:757K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.2mmx1.6mm SMD CHIP LED LAMP
Part Number: KPT-3216CGCK
Green
Features
Description
z 3.2mmx1.6mm SMD LED, 0.75mm thickness.
z Low power consumption.
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAD0222
APPROVED: Wynec
REV NO: V.16B
CHECKED: Allen Liu
DATE: MAY/28/2016
DRAWN: L.T.Zhang
PAGE: 1 OF 5
ERP: 1203001909
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
KPT-3216CGCK
Notes:
Green (AlGaInP)
Water Clear
20
50
140°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Green
Typ.
574
570
20
Max.
Units
Test Conditions
IF=20mA
m
nm
nm
pF
V
Green
IF=20mA
Green
IF=20mA
Green
5
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Gre
2.1
2.5
10
Reverse Current
een
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is tracele tCIE127-07 sandards.
4. Excess driving current and / ating teperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAD0222
APPROVED: Wynec
REV NO: V.16B
CHECKED: Allen Liu
DATE: MAY/28/2016
DRAWN: L.T.Zhang
PAGE: 2 OF 5
ERP: 1203001909
Green
KPT-3216CGCK
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAD0222
APPROVED: Wynec
REV NO: V.16B
CHECKED: Allen Liu
DATE: MAY/28/2016
DRAWN: L.T.Zhang
PAGE: 3 OF 5
ERP: 1203001909
KPT-3216CGCK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAD0222
APPROVED: Wynec
REV NO: V.16B
DATE: MAY/28/2016
DRAWN: L.T.Zhang
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203001909
PACKING & LABEL SPECIFICATIONS
KPT-3216CGCK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
授权于深圳市容感科技有限公司
程梦:0755-83539752
QQ:2093686917
SPEC NO: DSAD0222
APPROVED: Wynec
REV NO: V.16B
CHECKED: Allen Liu
DATE: MAY/28/2016
DRAWN: L.T.Zhang
PAGE: 5 OF 5
ERP: 1203001909
相关型号:
KPT-3216MBCK
Single Color LED, Blue, Water Clear, 2mm, 3.20 X 1.60 MM, 0.75 MM HEIGHT, SUPER THIN, 1206, 2 PIN
KINGBRIGHT
KPT-3216MGC
Single Color LED, Mega Green, Water Clear, 1.2mm, 3.20 X 1.60 MM, 0.75 MM HEIGHT, ROHS COMPLIANT, SMD, 2 PIN
KINGBRIGHT
KPT-3216PBC-J
SINGLE COLOR LED, BLUE, 2mm, 3.20 X 1.60 MM, 0.75 MM HEIGHT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
KPT-3216SEC
Single Color LED, Super Bright Orange, Water Clear, 2mm, 3.20 X 1.60 MM, 0.75 MM HEIGHT, SURFACE MOUNT PACKAGE-2
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明