KPT-2012QBC-D [KINGBRIGHT]
2.2mm*1.25mm*0.75mm 0805蓝光;
| 型号： | KPT-2012QBC-D |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 2.2mm*1.25mm*0.75mm 0805蓝光 可见光LED 光电 |
| 文件： | 总5页 (文件大小：434K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.0x1.25mm SMD CHIP LED LAMP
Part Number: KPT-2012QBC-D
Blue
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Descriptions
z 2.0mmx1.25mm SMD LED,0.75mm thickness.
z Low power consumption.
z The Blue source color devices are made with InGaN
Light Emitting Diode.
z Wide viewing angle.
z Electrostatic discharge and power surge could damage
the LEDs.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB4484
APPROVED: Wynec
REV NO: V.15B
DATE: SEP/14/2015
DRAWN: L.Q.Xie
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203001847
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
Typ.
2θ1/2
KPT-2012QBC-D
Notes:
Blue (InGaN)
Water Clear
40
100
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Blue
Typ.
460
465
25
Max.
Units
Test Conditions
IF=20mA
m
nm
nm
pF
V
Blue
IF=20mA
Blue
IF=20mA
Blue
10
3.3
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
Blu
4
Reverse Current
ue
50
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is tracele tthe CIE1-207 compliant national standards.
4. Excess driving current and / ating teperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
120
30
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
150
5
Electrostatic Discharge Threshold (HBM)
Operating Temperature
Storage Temperature
250
V
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB4484
APPROVED: Wynec
REV NO: V.15B
CHECKED: Allen Liu
DATE: SEP/14/2015
DRAWN: L.Q.Xie
PAGE: 2 OF 5
ERP: 1203001847
Blue
KPT-2012QBC-D
SPEC NO: DSAB4484
APPROVED: Wynec
REV NO: V.15B
DATE: SEP/14/2015
DRAWN: L.Q.Xie
PAGE: 3 OF 5
CHECKED: Allen Liu
ERP: 1203001847
KPT-2012QBC-D
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
SPEC NO: DSAB4484
APPROVED: Wynec
REV NO: V.15B
DATE: SEP/14/2015
DRAWN: L.Q.Xie
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203001847
PACKING & LABEL SPECIFICATIONS
KPT-2012QBC-D
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAB4484
APPROVED: Wynec
REV NO: V.15B
DATE: SEP/14/2015
DRAWN: L.Q.Xie
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203001847
相关型号：
©2020 ICPDF网 联系我们和版权申明