KPT-2012SECK [KINGBRIGHT]
2.2mm*1.25mm*0.75mm 0805橙光 SMD CHIP LED LAMP;
| 型号： | KPT-2012SECK |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | 2.2mm*1.25mm*0.75mm 0805橙光 SMD CHIP LED LAMP 可见光LED 光电 |
| 文件： | 总5页 (文件大小：395K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.0x1.25mm SMD CHIP LED LAMP
Part Number: KPT-2012SECK
Super Bright Orange
Features
Description
z 2.0mm x1.25mm SMD LED,0.75mm thickness.
z Low power consumption.
The Super Bright Orange device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAA4129
APPROVED: Wynec
REV NO: V.16A
DATE: MAR/16/2016
DRAWN: M.Liu
PAGE: 1 OF 5
CHECKED: Allen Liu
ERP: 1203001862
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
120
*80
Typ.
250
2θ1/2
KPT-2012SECK
Notes:
Super Bright Orange (AlGaInP)
Water Clear
120°
*180
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Typ.
610
601
29
Max.
Units
nm
nm
nm
pF
Test Conditions
IF=20mA
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Brige
Suht ge
IF=20mA
IF=20mA
5
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2.1
2.5
10
V
Reverse Current
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is tracele tCIE127-07 sndards.
4. Excess driving current and / r ating teperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
75
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
30
195
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAA4129
APPROVED: Wynec
REV NO: V.16A
DATE: MAR/16/2016
DRAWN: M.Liu
PAGE: 2 OF 5
CHECKED: Allen Liu
ERP: 1203001862
Super Bright Orange
KPT-2012SECK
SPEC NO: DSAA4129
APPROVED: Wynec
REV NO: V.16A
CHECKED: Allen Liu
DATE: MAR/16/2016
DRAWN: M.Liu
PAGE: 3 OF 5
ERP: 1203001862
KPT-2012SECK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reeenion
Tape Dimensions
(Units : mm)
SPEC NO: DSAA4129
APPROVED: Wynec
REV NO: V.16A
DATE: MAR/16/2016
DRAWN: M.Liu
PAGE: 4 OF 5
CHECKED: Allen Liu
ERP: 1203001862
PACKING & LABEL SPECIFICATIONS
KPT-2012SECK
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAA4129
APPROVED: Wynec
REV NO: V.16A
DATE: MAR/16/2016
DRAWN: M.Liu
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1203001862
相关型号：
©2020 ICPDF网 联系我们和版权申明