KA-4040SYSK [KINGBRIGHT]
SINGLE COLOR LED, SUPER BRIGHT YELLOW, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN;
| 型号： | KA-4040SYSK |
| 厂家： | 
KINGBRIGHT CORPORATION |
| 描述： | SINGLE COLOR LED, SUPER BRIGHT YELLOW, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN 光电 |
| 文件： | 总6页 (文件大小：244K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
4.0x4.0mm RIGHT ANGLE SURFACE MOUNT
LED LAMP
Part Number: KA-4040SYSK
Super Bright Yellow
Features
Description
z Single color.
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
z Suitable for all SMT assembly and solder process.
z Available on tape and reel.
z Ideal for backlighting.
z Package : 500pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL0585
APPROVED: WYNEC
REV NO: V.5B
DATE: MAR/25/2013
DRAWN: Y.Liu
PAGE: 1 OF 6
CHECKED: Allen Liu
ERP: 1201006683
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
SPEC NO: DSAL0585
APPROVED: WYNEC
REV NO: V.5B
DATE: MAR/25/2013
DRAWN: Y.Liu
PAGE: 2 OF 6
CHECKED: Allen Liu
ERP: 1201006683
Selection Guide
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Part No.
Dice
Lens Type
Min.
Typ.
2θ1/2
KA-4040SYSK
Notes:
Super Bright Yellow (AlGaInP)
Water Clear
120
250
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Device
Typ.
590
590
20
Max.
Units
Test Conditions
IF=20mA
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
Super Bright Yellow
nm
nm
nm
pF
V
IF=20mA
IF=20mA
20
VF=0V;f=1MHz
IF=20mA
VF [2]
IR
Forward Voltage
2
2.5
10
Reverse Current
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Yellow
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
75
30
175
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAL0585
APPROVED: WYNEC
REV NO: V.5B
CHECKED: Allen Liu
DATE: MAR/25/2013
DRAWN: Y.Liu
PAGE: 3 OF 6
ERP: 1201006683
Super Bright Yellow
KA-4040SYSK
SPEC NO: DSAL0585
APPROVED: WYNEC
REV NO: V.5B
CHECKED: Allen Liu
DATE: MAR/25/2013
DRAWN: Y.Liu
PAGE: 4 OF 6
ERP: 1201006683
KA-4040SYSK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAL0585
APPROVED: WYNEC
REV NO: V.5B
DATE: MAR/25/2013
DRAWN: Y.Liu
PAGE: 5 OF 6
CHECKED: Allen Liu
ERP: 1201006683
PACKING & LABEL SPECIFICATIONS
KA-4040SYSK
數位簽署者：yuanfang
：cn=yuanfang,o,ou=SP
emai =rd02_p40@ cn.kingbright.com,c=<無>
日期 2013.04.0208:24:54+08'00'
D
N
EC專用,
l
yuanfang
SPEC NO: DSAL0585
APPROVED: WYNEC
REV NO: V.5B
DATE: MAR/25/2013
DRAWN: Y.Liu
PAGE: 6 OF 6
CHECKED: Allen Liu
ERP: 1201006683
相关型号：
©2020 ICPDF网 联系我们和版权申明