首页 |元器件品牌

KA-4040ZGS-E [KINGBRIGHT]

Single Color LED, Green, Water Clear, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN;
KA-4040ZGS-E
型号： KA-4040ZGS-E
厂家： KINGBRIGHT CORPORATION    KINGBRIGHT CORPORATION
描述：

Single Color LED, Green, Water Clear, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN

光电
文件： 总6页 (文件大小：236K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
4.0x4.0mm RIGHT ANGLE SURFACE MOUNT  
LED LAMP  
Part Number: KA-4040ZGS-E  
Green  
ATTENTION  
OBSERVE PRECAUTIONS  
FOR HANDLING  
ELECTROSTATIC  
DISCHARGE  
SENSITIVE  
DEVICES  
Features  
Description  
z Single color.  
The Green source color devices are made with InGaN Light  
Emitting Diode.  
z Suitable for all SMT assembly and solder process.  
z Available on tape and reel.  
z Ideal for backlighting.  
Static electricity and surge damage the LEDS.  
It is recommended to use a wrist band or anti-electrostatic  
glove when handling the LEDs.  
z Package : 500pcs / reel.  
z Moisture sensitivity level : level 3.  
z RoHS compliant.  
All devices, equipment and machinery must be electrically  
grounded.  
Package Dimensions  
Notes:  
1. All dimensions are in millimeters (inches).  
2. Tolerance is ±0.25(0.01") unless otherwise noted.  
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.  
4. The device has a single mounting surface. The device must be mounted according to the specifications.  
SPEC NO: DSAL0124  
APPROVED: WYNEC  
REV NO: V.2  
DATE: JAN/19/2011  
DRAWN: D.M.Su  
PAGE: 1 OF 6  
ERP:1201007056  
CHECKED: Allen Liu  
Handling Precautions  
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic  
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.  
As a result, special handling precautions need to be observed during assembly using silicone encapsulated  
LED products. Failure to comply might lead to damage and premature failure of the LED.  
1. Handle the component along the side surfaces by using forceps or appropriate tools.  
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.  
3. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of  
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.  
SPEC NO: DSAL0124  
APPROVED: WYNEC  
REV NO: V.2  
DATE: JAN/19/2011  
DRAWN: D.M.Su  
PAGE: 2 OF 6  
ERP:1201007056  
CHECKED: Allen Liu  
Selection Guide  
Iv (mcd) [2]  
@ 20mA  
Viewing  
Angle [1]  
Part No.  
Dice  
Lens Type  
Min.  
Typ.  
2θ1/2  
KA-4040ZGS-E  
Notes:  
Green (InGaN)  
Water Clear  
500  
1000  
120°  
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.  
2. Luminous intensity/ luminous Flux: +/-15%.  
Electrical / Optical Characteristics at TA=25°C  
Symbol  
λpeak  
λD [1]  
Δλ1/2  
C
Parameter  
Peak Wavelength  
Dominant Wavelength  
Spectral Line Half-width  
Capacitance  
Device  
Green  
Green  
Green  
Green  
Green  
Green  
Typ.  
520  
525  
35  
Max.  
Units  
nm  
nm  
nm  
pF  
Test Conditions  
IF=20mA  
IF=20mA  
IF=20mA  
100  
3.2  
VF=0V;f=1MHz  
IF=20mA  
VF [2]  
IR  
Forward Voltage  
4.0  
50  
V
Reverse Current  
uA  
VR=5V  
Notes:  
1.Wavelength: +/-1nm.  
2. Forward Voltage: +/-0.1V.  
Absolute Maximum Ratings at TA=25°C  
Parameter  
Green  
Units  
mW  
mA  
mA  
V
Power dissipation  
120  
30  
DC Forward Current  
Peak Forward Current [1]  
Reverse Voltage  
100  
5
Operating Temperature  
Storage Temperature  
-40°C To +85°C  
-40°C To +85°C  
Note:  
1. 1/10 Duty Cycle, 0.1ms Pulse Width.  
SPEC NO: DSAL0124  
APPROVED: WYNEC  
REV NO: V.2  
DATE: JAN/19/2011  
DRAWN: D.M.Su  
PAGE: 3 OF 6  
ERP:1201007056  
CHECKED: Allen Liu  
Green  
KA-4040ZGS-E  
SPEC NO: DSAL0124  
APPROVED: WYNEC  
REV NO: V.2  
DATE: JAN/19/2011  
DRAWN: D.M.Su  
PAGE: 4 OF 6  
ERP:1201007056  
CHECKED: Allen Liu  
KA-4040ZGS-E  
Reflow soldering is recommended and the soldering profile is shown below.  
Other soldering methods are not recommended as they might cause damage to the product.  
Recommended Soldering Pattern  
(Units : mm; Tolerance: ± 0.1)  
Reel Dimension  
Tape Dimensions  
(Units : mm)  
SPEC NO: DSAL0124  
APPROVED: WYNEC  
REV NO: V.2  
DATE: JAN/19/2011  
DRAWN: D.M.Su  
PAGE: 5 OF 6  
ERP:1201007056  
CHECKED: Allen Liu  
PACKING & LABEL SPECIFICATIONS  
KA-4040ZGS-E  
數位簽署者：yalin  
DN：cn=yalin,o,  
yali ou=SPEC 專用,  
email=yalin@ yalin.  
com,c=<無>  
日期 2011.01.19  
10:58:14+08'00'  
n
SPEC NO: DSAL0124  
APPROVED: WYNEC  
REV NO: V.2  
DATE: JAN/19/2011  
DRAWN: D.M.Su  
PAGE: 6 OF 6  
ERP:1201007056  
CHECKED: Allen Liu  

相关型号：

KA-4040ZGS-G

 SINGLE COLOR LED, GREEN, 2.4mm, ROHS COMPLIANT, SMT, 2 PIN
KINGBRIGHT

KA-4110SGC

 Single Color LED, Super Bright Green, Water Clear, 4.1mm,
KINGBRIGHT

KA-430

 Trans Voltage Suppressor Diode, 430V V(RWM), Bidirectional, 1 Element, Silicon,
PROTEC

KA-4700470020%

 Common Mode Choke, 4700uH, 20%, 2 Element
VISHAY

KA-47047020%

 Common Mode Choke, 470uH, 20%, 2 Element
VISHAY

KA-5060PBC-G

 SINGLE COLOR LED, BLUE, 3.2mm, 5 X 6 MM, SMT, 4 PIN
KINGBRIGHT

KA-5060PBC-H

 SINGLE COLOR LED, BLUE, 3.2mm, 5 X 6 MM, SMT, 4 PIN
KINGBRIGHT

KA-5060PWC-G

 SINGLE COLOR LED, WHITE, 3.2mm, 5 X 6 MM, SMT, 4 PIN
KINGBRIGHT

KA-5060PWC-H

 SINGLE COLOR LED, WHITE, 3.2mm, 5 X 6 MM, SMT, 4 PIN
KINGBRIGHT

KA-5060QWC-D

 SINGLE COLOR LED, WHITE, 3.2mm, 5 X 6 MM, SMT, 4 PIN
KINGBRIGHT

KA-5060SEC-E

 SINGLE COLOR LED, HYPER ORANGE, 3.2mm, 5.00 MM X 6.00 MM, 1.40 MM HEIGHT, SMT-4
KINGBRIGHT

KA-5060SURC-E

 SINGLE COLOR LED, HYPER RED, 3.2mm, 5 X 6 MM, SMT, 4 PIN
KINGBRIGHT
©2020 ICPDF网 联系我们和版权申明