R46103M275BFL [KEMET]

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount, RADIAL LEADED;
R46103M275BFL
型号: R46103M275BFL
厂家: KEMET CORPORATION    KEMET CORPORATION
描述:

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount, RADIAL LEADED

文件: 总3页 (文件大小:379K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
NISSEI-ARCOTRONICS  
R46  
X2 CLASS (EN132400) – MKP Series  
Bulk  
Taped  
METALLIZED POLYPROPYLENE FILM  
Fig. 1 Fig. 2  
CAPACITOR  
SELF-HEALING PROPERTIES  
Typical applications: Interference suppression and  
across-the-line applications. Suitable for use in situations  
where failure of the capacitor would not lead to danger of  
electric shock.  
SERIES CODE: R46  
Insulated rigid leads  
Insulated flexible leads 0.5mm2  
p = 37.5  
1
p 15  
22.5p27.5  
Ød ±0.05  
P2  
0.6  
0.8  
Fig. 1  
12.70  
Fig 2.  
19.05  
All dimensions are in mm  
GENERAL TECHNICAL DATA  
Dielectric:  
Plates:  
polypropylene film  
metal layer deposited by evaporation under  
vacuum  
PART NUMBERING SYSTEM  
1
2
3
4
5
6
7
[8 ]  
R 4 6  
2 7 5  
Winding:  
Leads:  
non-inductive type  
tinned wire  
1.  
2.  
Series code  
Protection: plastic case, epoxy resin filled. Box material  
is solvent resistant and flame retardant  
according to UL94 V0  
Capacitance value in pico farads. First 2 digits  
are significant and 3rd digit indicates number of  
zeros.  
Marking:  
manufacturer’s logo, series, capacitance,  
tolerance, rated voltage, capacitor class,  
dielectric code, climatic category, passive  
flammability category, manufacturing date  
code, approvals, manufacturing plant  
3.  
Capacitance tolerance  
K = 10%  
M = 20%  
4.  
5.  
A.C. voltage  
Packaging code  
Climatic category:  
40/110/56 IEC 60068-1  
B = bulk  
A = ammo  
R = reel  
N = 22.5  
Operating temperature range: -40 to +110°C  
Related documents: IEC 60384-14 2nd edition 1993;  
EN 1324  
6.  
7.  
8.  
Lead spacing (mm)  
F = 10  
I = 15  
R = 27.5  
W = 37.5  
Lead length (mm)  
WINDING SCHEME  
L = 24-27  
S = 4.0-6.0  
T = 3.5-4.0  
V = 2.7-3.3  
Internal code  
single sided metallized  
polypropylene film  
Contact NAA for part number sequence on parts  
with insulated leads.  
NISSEI-ARCOTRONICS  
R46  
X2 CLASS (EN132400) – MKP Series  
METALLIZED POLYPROPYLENE FILM  
CAPACITOR  
SELF-HEALING PROPERTIES  
SERIES CODE: R46  
Rated  
Max dv/dt  
At 390Vdc  
(V/µs)  
500  
275Vac  
Part Number  
TYPICAL GRAPHS  
Cap. (*)  
B
H
L
P
Z = f(f) (lead length 2 mm). Typical values.  
5.0 11.0 13.0 10.0  
5.0 11.0 13.0 10.0  
5.0 11.0 13.0 10.0  
5.0 11.0 13.0 10.0  
6.0 12.0 13.0 10.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
5.0 11.0 18.0 15.0  
6.0 12.0 18.0 15.0  
6.0 12.0 18.0 15.0  
7.5 13.5 18.0 15.0  
7.5 13.5 18.0 15.0  
8.5 14.5 18.0 15.0  
10.0 16.0 18.0 15.0  
11.0 19.0 18.0 15.0  
6.0 15.0 26.5 22.5  
6.0 15.0 26.5 22.5  
7.0 16.0 26.5 22.5  
8.5 17.0 26.5 22.5  
10.0 18.5 26.5 22.5  
13.0 22.0 26.5 22.5  
9.0 17.0 32.0 27.5  
9.0 17.0 32.0 27.5  
11.0 20.0 32.0 27.5  
13.0 22.0 32.0 27.5  
14.0 28.0 32.0 27.5  
18.0 33.0 32.0 27.5  
22.0 37.0 32.0 27.5  
13.0 24.0 41.5 37.5  
16.0 28.5 41.5 37.5  
19.0 32.0 41.5 37.5  
R46103-275-F-  
R46153-275-F-  
R46223-275-F-  
R46333-275-F-  
R46473-275-F-  
R46103-275-I-  
R46153-275-I-  
R46223-275-I-  
R46333-275-I-  
R46473-275-I-  
R46683-275-I-  
R46104M275-I-  
R46104-275-I-[U]  
R46154M275-I-  
R46154-275-I-[U]  
R46224M275-I-  
R46224-275-I-[U]  
R46334-275-I-  
R46474-275-I-  
R46154-275-N-  
R46224-275-N-  
R46334-275-N-  
R46474-275-N-  
R46684-275-N-  
R46105-275-N-  
R46474-275-R-  
R46684-275-R-  
R46105-275-R-  
R46155-275-R-  
R46225-275-R-  
R46335-275-R-  
R46475-275-R-  
R46225-275-W-  
R46335-275-W-  
R46475-275-W-  
0.010 µF  
0.015 µF  
0.022 µF  
0.033 µF  
0.047 µF  
0.010 µF  
0.015 µF  
0.022 µF  
0.033 µF  
0.047 µF  
0.068 µF  
0.10 µF  
0.10 µF  
0.15 µF  
0.15 µF  
0.22 µF  
0.22 µF  
0.33 µF  
0.47 µF  
0.15 µF  
0.22 µF  
0.33 µF  
0.47 µF  
0.68 µF  
1.0 µF  
500  
500  
500  
500  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
400  
200  
200  
200  
Low Profile Version for Fluorescent Ballasts  
200  
Rated  
Max dv/dt  
At 390Vdc  
(V/µs)  
200  
275Vac  
H
Part Number  
Cap. (*)  
200  
B
L
P
150  
0.47µF  
0.68 µF  
1.0 µF  
9.0 12.0 18.0 15.0  
13.0 12.0 18.0 15.0  
400  
R46224-275-I-[H]  
R46334-275-I-[H]  
0.22 µF  
0.33 µF  
150  
400  
150  
Tolerance: K (± 10%); M (±20%)  
150  
1.5 µF  
Packaging code: B (bulk); A (ammo); R (reel)  
Lead length (mm): L (24-27); S (4-6); T (3.5-4.0); V (2.7-3.3)  
150  
2.2 µF  
150  
3.3 µF  
150  
4.7 µF  
100  
2.2 µF  
100  
3.3 µF  
100  
4.7 µF  
Tolerance: K (± 10%); M (±20%)  
Packaging code: B (bulk); A (ammo); R (reel)  
Lead length (mm): L (24-27); S (4-6); T (3.5-4.0); V (2.7-3.3)  
All dimensions are in mm.  
(*) E12 series available up to 5.6µF upon request  
Note: The .1, .15 and .22µF are available with 15mm lead  
spacing and in 2 different box sizes. In each case  
the capacitance tolerance in the smaller size is  
limited to ±20%. Please use the larger box size if  
10% tolerance is required.  
NISSEI-ARCOTRONICS  
R46  
X2 CLASS (EN132400) – MKP Series  
METALLIZED POLYPROPYLENE FILM  
CAPACITOR  
SELF-HEALING PROPERTIES  
SERIES CODE: R46  
ELECTRICAL CHARACTERISTICS  
TEST METHOD AND PERFORMANCE  
Damp heat, steady state:  
Rated voltage (VR):  
Capacitance range:  
Capacitance values:  
275Vac; 50/60Hz  
Test conditions 1st  
0.01µF to 4.7µF  
Temperature:  
+40°C ± 2°C  
93% ± 2%  
56 days  
Relative humidity (RH):  
Test duration:  
E6 series (IEC 60063 Norm)  
Test conditions 2nd  
Temperature:  
Capacitance tolerances (measured at 1 kHz):  
+60°C ± 2°C  
95% ± 2%  
500 hours  
10% (K); 20% (M).  
Relative humidity (RH):  
Test duration:  
Dissipation factor (DF):  
Performance  
tgδ×10-4 at +25°C ± 5°C:  
10 (6)* at 1kHz  
Dielectric strength:  
no dielectric breakdown or  
flashover at 4.3 x VR (d.c.) /1 min  
*Typical value  
Capacitance change (C/C): 5%  
Insulation resistance: 50% of initial limit  
Insulation resistance:  
Test conditions  
Temperature:  
Endurance:  
+25°C ± 5°C  
1 min  
Test conditions  
Temperature:  
Test duration:  
Voltage charge time:  
Voltage charge:  
Performance  
+110°C ± 2°C  
100Vdc  
1000 h  
Voltage applied:  
1.25×VR + 1000Vac 0.1 s/h  
1 x 105 M(5 x 105 M)* for C 0.33µF  
Performance  
30000 s  
(150000 s)*  
for C>0.33µF  
Dielectric strength:  
no dielectric breakdown or  
*Typical value  
flashover at 4.3 x VR (d.c.) /1 min  
Capacitance change (C/C): 10%  
Test voltage between terminals (on all pieces):  
1500Vac for 1 s + 2200Vdc for 1 s at +25°C ± 5°C  
Insulation resistance:  
Resistance to soldering heat:  
Test conditions  
50% of initial limit  
Solder bath temperature:  
+260°C ± 5°C  
Dipping time (with heat screen): 10 s ± 1 s  
Performance  
Capacitance change (C/C): 2%  
APPROVALS  
ENEC-IMQ  
File No. V4413  
File No. IT-1524  
EN 132400  
Class X2  
(*)  
CB  
CSA C22.2 N°1  
(up to 1µF)  
Across-the-line  
Across-the-line  
File No. LR83890  
File No. E 97797  
File NO. E85238  
UL 1414  
(up to 1µF)  
Electromagnetic  
Interference  
Filters  
UL 1283  
(310 VAC)  
CCEE IEC60384-14  
Class X2  
File No. CH0045034-2000  
CSA and UL 1414 for 250Vac only.  
Approved according to EN 132400 (IEC 60384-14 2nd edition 1993 plus Amendment A1: 1995).  
According to IEC 60065.  
(*) ENEC mark has replaced all of the following European National marks:  

相关型号:

R46103M275BIL

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.01uF, Through Hole Mount, RADIAL LEADED
KEMET

R46104K275RI[U]

Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET

R46104M275AI[U]

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET

R46104M275RI

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.1uF, Through Hole Mount, RADIAL LEADED
KEMET

R46105M275AR

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 1uF, Through Hole Mount, RADIAL LEADED
KEMET

R46153K275BFL

Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.015uF, Through Hole Mount, RADIAL LEADED
KEMET

R46153K275RF

Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.015uF, Through Hole Mount, RADIAL LEADED
KEMET

R46153M275BIT

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.015uF, Through Hole Mount, RADIAL LEADED
KEMET

R46154K275BIL[U]

Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET

R46154K275RI[U]

Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET

R46154M275BIV[U]

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET

R46154M275BNL

Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET