R46154K275RI[U] [KEMET]
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED;型号: | R46154K275RI[U] |
厂家: | KEMET CORPORATION |
描述: | Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED |
文件: | 总3页 (文件大小:379K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NISSEI-ARCOTRONICS
R46
X2 CLASS (EN132400) – MKP Series
Bulk
Taped
METALLIZED POLYPROPYLENE FILM
Fig. 1 Fig. 2
CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: Interference suppression and
across-the-line applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
SERIES CODE: R46
Insulated rigid leads
Insulated flexible leads 0.5mm2
p = 37.5
1
p ≤ 15
22.5≤p≤27.5
Ød ±0.05
P2
0.6
0.8
Fig. 1
12.70
Fig 2.
19.05
GENERAL TECHNICAL DATA
Dielectric:
Plates:
polypropylene film
metal layer deposited by evaporation under
vacuum
PART NUMBERING SYSTEM
1
2
3
4
5
6
7
[8 ]
R 4 6
2 7 5
Winding:
Leads:
non-inductive type
tinned wire
1.
2.
Series code
Protection: plastic case, epoxy resin filled. Box material
is solvent resistant and flame retardant
according to UL94 V0
Capacitance value in pico farads. First 2 digits
are significant and 3rd digit indicates number of
zeros.
Marking:
manufacturer’s logo, series, capacitance,
tolerance, rated voltage, capacitor class,
dielectric code, climatic category, passive
flammability category, manufacturing date
code, approvals, manufacturing plant
3.
Capacitance tolerance
K = 10%
M = 20%
4.
5.
A.C. voltage
Packaging code
Climatic category:
40/110/56 IEC 60068-1
B = bulk
A = ammo
R = reel
N = 22.5
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14 2nd edition 1993;
EN 1324
6.
7.
8.
Lead spacing (mm)
F = 10
I = 15
R = 27.5
W = 37.5
Lead length (mm)
WINDING SCHEME
L = 24-27
S = 4.0-6.0
T = 3.5-4.0
V = 2.7-3.3
Internal code
single sided metallized
polypropylene film
Contact NAA for part number sequence on parts
with insulated leads.
NISSEI-ARCOTRONICS
R46
X2 CLASS (EN132400) – MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
SELF-HEALING PROPERTIES
SERIES CODE: R46
Rated
Max dv/dt
At 390Vdc
(V/µs)
500
275Vac
Part Number
TYPICAL GRAPHS
Cap. (*)
B
H
L
P
Z = f(f) (lead length 2 mm). Typical values.
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
5.0 11.0 13.0 10.0
6.0 12.0 13.0 10.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
5.0 11.0 18.0 15.0
6.0 12.0 18.0 15.0
6.0 12.0 18.0 15.0
7.5 13.5 18.0 15.0
7.5 13.5 18.0 15.0
8.5 14.5 18.0 15.0
10.0 16.0 18.0 15.0
11.0 19.0 18.0 15.0
6.0 15.0 26.5 22.5
6.0 15.0 26.5 22.5
7.0 16.0 26.5 22.5
8.5 17.0 26.5 22.5
10.0 18.5 26.5 22.5
13.0 22.0 26.5 22.5
9.0 17.0 32.0 27.5
9.0 17.0 32.0 27.5
11.0 20.0 32.0 27.5
13.0 22.0 32.0 27.5
14.0 28.0 32.0 27.5
18.0 33.0 32.0 27.5
22.0 37.0 32.0 27.5
13.0 24.0 41.5 37.5
16.0 28.5 41.5 37.5
19.0 32.0 41.5 37.5
R46103-275-F-
R46153-275-F-
R46223-275-F-
R46333-275-F-
R46473-275-F-
R46103-275-I-
R46153-275-I-
R46223-275-I-
R46333-275-I-
R46473-275-I-
R46683-275-I-
R46104M275-I-
R46104-275-I-[U]
R46154M275-I-
R46154-275-I-[U]
R46224M275-I-
R46224-275-I-[U]
R46334-275-I-
R46474-275-I-
R46154-275-N-
R46224-275-N-
R46334-275-N-
R46474-275-N-
R46684-275-N-
R46105-275-N-
R46474-275-R-
R46684-275-R-
R46105-275-R-
R46155-275-R-
R46225-275-R-
R46335-275-R-
R46475-275-R-
R46225-275-W-
R46335-275-W-
R46475-275-W-
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.010 µF
0.015 µF
0.022 µF
0.033 µF
0.047 µF
0.068 µF
0.10 µF
0.10 µF
0.15 µF
0.15 µF
0.22 µF
0.22 µF
0.33 µF
0.47 µF
0.15 µF
0.22 µF
0.33 µF
0.47 µF
0.68 µF
1.0 µF
500
500
500
500
400
400
400
400
400
400
400
400
400
400
400
400
400
400
200
200
200
Low Profile Version for Fluorescent Ballasts
200
Rated
Max dv/dt
At 390Vdc
(V/µs)
200
275Vac
H
Part Number
Cap. (*)
200
B
L
P
150
0.47µF
0.68 µF
1.0 µF
9.0 12.0 18.0 15.0
13.0 12.0 18.0 15.0
400
R46224-275-I-[H]
R46334-275-I-[H]
0.22 µF
0.33 µF
150
400
150
Tolerance: K (± 10%); M (±20%)
150
1.5 µF
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); S (4-6); T (3.5-4.0); V (2.7-3.3)
150
2.2 µF
150
3.3 µF
150
4.7 µF
100
2.2 µF
100
3.3 µF
100
4.7 µF
Tolerance: K (± 10%); M (±20%)
Packaging code: B (bulk); A (ammo); R (reel)
Lead length (mm): L (24-27); S (4-6); T (3.5-4.0); V (2.7-3.3)
All dimensions are in mm.
(*) E12 series available up to 5.6µF upon request
Note: The .1, .15 and .22µF are available with 15mm lead
spacing and in 2 different box sizes. In each case
the capacitance tolerance in the smaller size is
limited to ±20%. Please use the larger box size if
10% tolerance is required.
NISSEI-ARCOTRONICS
R46
X2 CLASS (EN132400) – MKP Series
METALLIZED POLYPROPYLENE FILM
CAPACITOR
SELF-HEALING PROPERTIES
SERIES CODE: R46
ELECTRICAL CHARACTERISTICS
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Rated voltage (VR):
Capacitance range:
Capacitance values:
275Vac; 50/60Hz
Test conditions 1st
0.01µF to 4.7µF
Temperature:
+40°C ± 2°C
93% ± 2%
56 days
Relative humidity (RH):
Test duration:
E6 series (IEC 60063 Norm)
Test conditions 2nd
Temperature:
Capacitance tolerances (measured at 1 kHz):
+60°C ± 2°C
95% ± 2%
500 hours
10% (K); 20% (M).
Relative humidity (RH):
Test duration:
Dissipation factor (DF):
Performance
tgδ×10-4 at +25°C ± 5°C:
≤ 10 (6)* at 1kHz
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.) /1 min
*Typical value
Capacitance change (∆C/C): ≤ 5%
Insulation resistance: ≥ 50% of initial limit
Insulation resistance:
Test conditions
Temperature:
Endurance:
+25°C ± 5°C
1 min
Test conditions
Temperature:
Test duration:
Voltage charge time:
Voltage charge:
Performance
+110°C ± 2°C
100Vdc
1000 h
Voltage applied:
1.25×VR + 1000Vac 0.1 s/h
≥ 1 x 105 MΩ (5 x 105 MΩ)* for C ≤0.33µF
Performance
≥30000 s
(150000 s)*
for C>0.33µF
Dielectric strength:
no dielectric breakdown or
*Typical value
flashover at 4.3 x VR (d.c.) /1 min
Capacitance change (∆C/C): ≤ 10%
Test voltage between terminals (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C ± 5°C
Insulation resistance:
Resistance to soldering heat:
Test conditions
≥ 50% of initial limit
Solder bath temperature:
+260°C ± 5°C
Dipping time (with heat screen): 10 s ± 1 s
Performance
Capacitance change (∆C/C): ≤ 2%
APPROVALS
ENEC-IMQ
File No. V4413
File No. IT-1524
EN 132400
Class X2
(*)
CB
CSA C22.2 N°1
(up to 1µF)
Across-the-line
Across-the-line
File No. LR83890
File No. E 97797
File NO. E85238
UL 1414
(up to 1µF)
Electromagnetic
Interference
Filters
UL 1283
(310 VAC)
CCEE IEC60384-14
Class X2
File No. CH0045034-2000
CSA and UL 1414 for 250Vac only.
Approved according to EN 132400 (IEC 60384-14 2nd edition 1993 plus Amendment A1: 1995).
According to IEC 60065.
(*) ENEC mark has replaced all of the following European National marks:
相关型号:
R46154M275BIV[U]
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R46154M275BNL
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.15uF, Through Hole Mount, RADIAL LEADED
KEMET
R46223K275BFL
Film Capacitor, Polypropylene, 10% +Tol, 10% -Tol, 0.022uF, Through Hole Mount, RADIAL LEADED
KEMET
R46224M275BIS
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R46224M275BIV
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R46224M275BNL
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R46224M275BNS
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.22uF, Through Hole Mount, RADIAL LEADED
KEMET
R46225M275BRS
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 2.2uF, Through Hole Mount, RADIAL LEADED
KEMET
R46334M275BIT[H]
Film Capacitor, Polypropylene, 20% +Tol, 20% -Tol, 0.33uF, Through Hole Mount, RADIAL LEADED
KEMET
R463F210050N0K
Film Capacitor, Polypropylene, 630V, 10% +Tol, 10% -Tol, 0.01uF, Through Hole Mount, 5116, RADIAL LEADED
KEMET
©2020 ICPDF网 联系我们和版权申明