ES3B002WF1 [JAE]
LED Power Supply Card Edge Type Connector; LED电源卡边缘型连接器
| 型号： | ES3B002WF1 |
| 厂家： | 
JAPAN AVIATION ELECTRONICS INDUSTRY, LTD. |
| 描述： | LED Power Supply Card Edge Type Connector |
| 文件： | 总5页 (文件大小：286K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
COMPONENTS PRODUCT INFORMATION
CONNECTOR
MB-0221-1
LED Power Supply Card Edge Type Connector
NEW
ES3 Series
December 2010
RoHS Compliant
Cover
Screws
LEDs
Connector
LED Mounting
Board Connector
Heat Sinkꢀ
(Aluminum Die-cast,
or Similar)
Converter Board
Insulation Case (Base)
Drawing of Inside of LED Bulb
(For Reference)
The ES3 Series is a card edge connector for power supply of LED lighting devices that
enables direct connection of the converter board and the LED mounting board.
It is a 2-position card edge type connector ideal for LED bulb and LED lighting devices.
The ES3 Series connectors are available in embossed tape, compatible with SMT
mounting.
The connector allows reflow solder mounting to the LED mounting board to occur at
the same time other parts like LED and SMT components are mounted.
1/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
MB-0221-1
Features
Low-profile 1.6mm mounting height, designed with consideration for light shielding.
Insulator is made of white LCP for heat and light resistance.
Direct connection of converter board and LED mounting board allows for reduced
assembly work time.
Cable-less connection makes reduction in the number of parts possible.
SMT type, can be mounted at the same time as other components to the LED
mounting board.
General Specifications
No. of Contacts: 2 pos.
Contact Resistance: 60mΩ max. (initial)
Dielectric Withstanding Voltage: AC 500Vr.m.s (per minute)
Durability: 20 mating cycles
Board Insertion Force: 30N max.
Rated Current: 1A
Rated Voltage: AC, DC 200V
Insulation Resistance: 10MΩ min. (after test)
Operating Temperature: -40 to+105 Deg. C
Materials and Finishes
Component
Insulator
Material / Finish
White LCP
Contact-R
Contact-L
Copper alloy / Sn plating
Copper alloy / Sn plating
Ordering Information
ES3 B 002 W F 1 R****
Series
Connection
Reel Product (Note1)
Modification Code
B: Bottom Mount Type
Connection Area Plating
F: Sn plating
No. of Contacts
Connection to Board
W: SMT straight type, without hold-down
2/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
MB-0221-1
Drawing
Unit: mm
Part Number ES3B002WF1
SJ Drawing
SJ110395
3/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
MB-0221-1
Unit: mm
Applicable Dimensions of Board
(SMT Side, for Reference)
Applicable Dimensions of Board
(Card Side, for Reference)
4/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
MB-0221-1
Part Number
SJ Drawing
ES3B002WF1R1000
SJ110396
Unit: mm
Ｂ
Ｂ
Notice: Products shown in this brochure are
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: Computers, Office
machines, Measuring devices,
Telecommunication devices (Terminals, Mobile
devices), AV devices, Household applications, FA
devices, etc.
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
5/5
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
相关型号：
ES3B002WF1000
Card Edge Connector, 2 Contact(s), 1 Row(s), Female, Straight, Surface Mount Terminal, ROHS COMPLIANT
JAE
ES3BB
Super Fast Surface Mount Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 3.0 Amperes
GOOD-ARK
©2020 ICPDF网 联系我们和版权申明