HA2-5135/883 [INTERSIL]

Precision Operational Amplifier; 精密运算放大器器


型号：	HA2-5135/883
厂家：	Intersil
描述：	Precision Operational Amplifier 精密运算放大器器运算放大器
文件：	总5页 (文件大小：106K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

HA-5135/883

Precision Operational Amplifier

June 2004

Features

Description

• This Circuit is Processed in Accordance to MIL-STD- The HA-5135/883 is a precision operational amplifier manu-

883 and is Fully Conformant Under the Provisions of factured using a combination of key technological advance-

Paragraph 1.2.1.

ments to provide outstanding input characteristics.

• Low Offset Drift . . . . . . . . . . . . . . . . . . . 0.4µV/^oC (Max) A high Beta input stage is combined with laser trimming,

dielectric isolation, and matching techniques to produce

• Low Offset Voltage. . . . . . . . . . . . . . . . . . . . .75µV (Max)

75µV (max) input offset voltage and 0.4µV/^oC (max) input

offset voltage average drift. Other features enhanced by this

process include 9nV/√Hz (typ) Input Noise Voltage, 4nA

Input Bias Current (max) and 120dB Open Loop Gain (min).

• High Gain . . . . . . . . . . . . . . . . . . . . 120dB(1MV/V) (Min)

• High CMRR . . . . . . . . . . . . . . . . . . . . . . . . . . 106dB (Min)

• High PSRR . . . . . . . . . . . . . . . . . . . . . . . . . . . 94dB (Min)

• Low Supply Current. . . . . . . . . . . . . . . . . . 1.7mA (Max)

• Low Noise Voltage Density at 1kHz . . . . . 9nV/√Hz (Max)

• Low Noise Current Density at 1kHz . . . . 0.4pA/√Hz (Max)

These features coupled with 106dB CMRR and 94dB PSRR

make HA-5135/883 an ideal device for precision D.C. instru-

mentation amplifiers. Excellent input characteristics in con-

junction with 0.6MHz (min) bandwidth and 0.5V/µs (min)

slew rate, makes this amplifier extremely useful for precision

integrator and biomedical amplifier designs. These amplifiers

are also well suited for precision data acquisition and for

accurate threshold detector applications.

Applications

• High Gain Instrumentation

• Precision Data Acquisition

• Precision Integrators

Part # Information

PART

NUMBER

TEMPERATURE

RANGE

PACKAGE

8 Pin Can

• Biomedical Amplifiers

• Precision Threshold Detectors

HA2-5135/883

-55^oC to +125^oC

Pinout

HA-5135/883

(METAL CAN)

TOP VIEW

BAL1

BAL 2

V+

-IN

OUT

BAL1

+IN

V- (CASE)

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.

Spec Number 511016-883

FN3731.3

HA-5135/883

Absolute Maximum Ratings

Thermal Information

Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 40V

Differential Input Voltage (Note 2). . . . . . . . . . . . . . . . . . . . . . . . . 7V

Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to V-

Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA

Output Current . . . . . . . . . . . . . . . . . . . .Full Short Circuit Protection

Junction Temperature (T_J) . . . . . . . . . . . . . . . . . . . . . . . . . . +175^oC

Storage Temperature Range . . . . . . . . . . . . . . . . . -65^oC to +150^oC

ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V

Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . +300^oC

Thermal Resistance

θ_JA

θ_JC

Metal Can Package . . . . . . . . . . . . . . . . . 160^oC/W 70^oC/W

Package Power Dissipation Limit at +75^oC for T_J≤ +175^oC

Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645mW

Package Power Dissipation Derating Factor Above +75^oC

Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5mW/^oC

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of

the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

NOTE:

1. θ_JAis measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief

TB379 for details.

Operating Conditions

Operating Temperature Range. . . . . . . . . . . . . . . . -55^oC to +125^oC

_INCM≤ 1/2 (V+ - V-)

Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V

R_L≥ 600Ω

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS

Device Tested at: V_SUPPLY= ±15V, R_SOURCE= 50Ω, R_LOAD= 100kΩ, V_OUT= 0V, Unless Otherwise Specified.

LIMITS

MAX

GROUP A

SUBGROUPS

PARAMETERS

SYMBOL

CONDITIONS

V_CM= 0V

TEMPERATURE

+25^oC

MIN

-75

-130

-4

UNITS

µV

Input Offset Voltage

V_IO

130

2, 3

+125^oC, -55^oC

+25^oC

µV

Input Bias Current

Input Offset Current

I_B

V_CM= 0V,

R_S= 10kΩ, 50Ω

2, 3

+125^oC, -55^oC

-6

+I + –I







----------------------------



I_IO

V_CM= 0V,

+R_S= 10kΩ,

-R_S= 10kΩ

+25^oC

-4

2, 3

+125^oC, -55^oC

-5.5

5.5

Common Mode

Range

+CMR

-CMR

V+ = +3V,

V- = -27V

2, 3

+25^oC

+125^oC, -55^oC

+25^oC

V+ = +27V,

V- = -3V

-12

2, 3

+125^oC, -55^oC

+25^oC

-12

Large Signal Voltage

Gain

+A_VOL

V_OUT= 0V and +10V,

R_L= 2kΩ

120

106

kV/V

5, 6

+125^oC, -55^oC

+25^oC

-A_VOL

V_OUT= 0V and -10V,

R_L= 2kΩ

5, 6

+125^oC, -55^oC

+25^oC

Common Mode

Rejection Ratio

+CMRR

∆V_CM= +10V,

V+ = +5V, V- = -25V,

2, 3

+125^oC, -55^oC

V_OUT= -10V

-CMRR

∆V_CM= -10V,

V+ = +25V, V- = -5V,

+25^oC

106

2, 3

+125^oC, -55^oC

V_OUT= +10V

Output Voltage

Swing

+V_OUT

R_L= 600Ω

5, 6

+25^oC

+125^oC, -55^oC

+25^oC

-V_OUT

R_L= 600Ω

-10

5, 6

+125^oC, -55^oC

+25^oC

Output Current

+I_OUT

-I_OUT

V_OUT= -10V

V_OUT= +10V

+25^oC

-15

Spec Number 511016-883

HA-5135/883

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)

Device Tested at: V_SUPPLY= ±15V, R_SOURCE= 50Ω, R_LOAD= 100kΩ, V_OUT= 0V, Unless Otherwise Specified.

LIMITS

MAX

GROUP A

SUBGROUPS

PARAMETERS

SYMBOL

CONDITIONS

TEMPERATURE

+25^oC

MIN

UNITS

Quiescent Power

Supply Current

+I_CC

V_OUT= 0V, I_OUT

0mA

2, 3

1.7

+125^oC, -55^oC

+25^oC

1.7

-I_CC

V_OUT= 0V, I_OUT

0mA

-1.7

2, 3

+125^oC, -55^oC

+25^oC

Power Supply

Rejection Ratio

+PSRR

∆V_SUP= 10V,

V+ = +5V, V- = -15V,

V+ = +15V, V- = -15V

2, 3

+125^oC, -55^oC

-PSRR

∆V_SUP= 10V,

V+ = +15V, V- = -5V,

V+ = +15V, V- = -15V

+25^oC

2, 3

+125^oC, -55^oC

Offset Voltage

Adjustment

+V_IOAdj

-V_IOAdj

Note 1

+25^oC

+125^oC, -55^oC

+25^oC

V_IO-1

V_IO+1

2, 3

Note 1

2, 3

+125^oC, -55^oC

NOTES:

1. Offset adjustment range is [V_IO(Measured ±1mV] minimum referred to output. This test is for functionality only to assure adjustment

through 0V.

2. The input stage has series 500Ω resistors along with back to back diodes. This provides large differential input voltage protection for a

slight increase in noise voltage.

TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS

Device Tested at: V_SUPPLY= ±15V, R_SOURCE= 50Ω, R_LOAD= 2kΩ, C_LOAD= 50pF, A_VCL= +1V/V, Unless Otherwise Specified.

LIMITS

GROUP A

PARAMETERS

Slew Rate

SYMBOL

CONDITIONS

SUBGROUPS

TEMPERATURE

MIN

MAX

UNITS

+SR

_OUT= -3V to +3V,

+25^oC

0.5

V/µs

_INS.R. ≤ 25V/µs

-SR

V_OUT= +3V to -3V,

+25^oC

0.5

V/µs

_INS.R. ≤ 25V/µs

TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS

Device Characterized at: V_SUPPLY= ±15V, R_LOAD= 2kΩ, C_LOAD= 50pF, A_V= +1V/V, Unless Otherwise Specified.

LIMITS

PARAMETERS

SYMBOL

CONDITIONS

V_CM= 0V

NOTES

TEMPERATURE

MIN

MAX

UNITS

Average Offset Voltage

Drift

V_IOTC

-55^oC to +125^oC

1.3

µV/^oC

Differential Input

Resistance

R_IN

V_CM= 0V

+25^oC

MΩ

Average Offset Current

Drift

_IOTC

Versus Temperature

-55^oC to +125^oC

+25^oC

pA/^oC

nV/√Hz

_CM= 0V

Versus Temperature

_CM= 0V

R_S= 20Ω, f_O= 1kHz

Average Bias Current Drift

I_BTC

E_N

Input Noise Voltage

Density

Spec Number 511016-883

HA-5135/883

TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)

Device Characterized at: V_SUPPLY= ±15V, R_LOAD= 2kΩ, C_LOAD= 50pF, A_V= +1V/V, Unless Otherwise Specified.

LIMITS

PARAMETERS

SYMBOL

CONDITIONS

NOTES

TEMPERATURE

MIN

MAX

UNITS

Input Noise Current

Density

I_N

R_S= 2MΩ, f_O= 1kHz

+25^oC

0.4

pA/√Hz

Unity Gain Bandwidth

UGBW

V_OUT= ±100mV,

+25^oC

600

kHz

f_Oat -3dB

Full Power Bandwidth

FPBW

CLSG

_PEAK= 10V

1, 2

+25^oC

kHz

V/V

Minimum Closed Loop

Stable Gain

R_L= 2kΩ, C_L= 50pF

-55^oC to +125^oC

Output Resistance

Power Consumption

R_OUT

Open Loop

+25^oC

Ω

V_OUT= 0V, I_OUT

0mA

1, 3

-55^oC to +125^oC

NOTES:

1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These param-

eters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characterization

based upon data from multiple production runs which reflect lot to lot and within lot variation.

2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2πV_PEAK).

3. Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.)

TABLE 4. ELECTRICAL TEST REQUIREMENTS

MIL-STD-883 TEST REQUIREMENTS

Interim Electrical Parameters (Pre Burn-In)

Final Electrical Test Parameters

Group A Test Requirements

SUBGROUPS (SEE TABLES 1 AND 2)

1 (Note 1), 2, 3, 4, 5, 6, 7

1, 2, 3, 4, 5, 6, 7

Groups C and D Endpoints

NOTE:

1. PDA applies to Subgroup 1 only.

Spec Number 511016-883

HA-5135/883

Die Characteristics

DIE DIMENSIONS:

72 x 103 x 19 mils ± 1 mils

1840 x 2620 x 483µm ± 25.4µm

METALLIZATION:

Type: Al, 1% Cu

Thickness: 16kÅ ± 2kÅ

GLASSIVATION:

Type: Nitride (Si3N4) over Silox (SIO2, 5% Phos.)

Silox Thickness: 12kÅ ± 2kÅ

Nitride Thickness: 3.5kÅ ± 1.5kÅ

WORST CASE CURRENT DENSITY:

6.0 x 10⁴A/cm²

SUBSTRATE POTENTIAL (Powered Up): V-

TRANSISTOR COUNT: 71

PROCESS: Bipolar Dielectric Isolation

Metallization Mask Layout

HA-5135/883

BAL1

V+

OUT

BAL1

BAL2

-IN

+IN

V-

All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.

Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality

Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without

notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see www.intersil.com

Sales Office Headquarters

NORTH AMERICA

Intersil Corporation

7585 Irvine Center Drive

Suite 100

Irvine, CA 92618

TEL: (949) 341-7000

FAX: (949) 341-7123

EUROPE

ASIA

Intersil Corporation

2401 Palm Bay Rd.

Palm Bay, FL 32905

TEL: (321) 724-7000

FAX: (321) 724-7946

Intersil Europe Sarl

Ave. William Graisse, 3

1006 Lausanne

Switzerland

TEL: +41 21 6140560

FAX: +41 21 6140579

Unit 1804 18/F Guangdong Water Building

83 Austin Road

TST, Kowloon Hong Kong

TEL: +852 2723 6339

FAX: +852 2730 1433

Spec Number 511016-883

HA2-5135/883 [INTERSIL]

相关型号：

HA2-5137-2

HA2-5137-5

HA2-5137/883

HA2-5137883

HA2-5137A-2

HA2-5137A2

HA2-5137A5

HA2-5141-2

HA2-5141-5

HA2-5141-7

HA2-5141-8

HA2-5141/883