HA-5102/883 [INTERSIL]
Dual, Low Noise, High Performance Operational Amplifier; 双通道,低噪声,高性能运算放大器型号: | HA-5102/883 |
厂家: | Intersil |
描述: | Dual, Low Noise, High Performance Operational Amplifier |
文件: | 总5页 (文件大小:548K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TM
HA-5102/883
Dual, Low Noise, High Performance
Operational Amplifier
July 1994
Features
Description
• This Circuit is Processed in Accordance to MIL-STD- Low noise and high performance are key words describing
883 and is Fully Conformant Under the Provisions of the unity gain stable HA-5102/883. This general purpose
Paragraph 1.2.1.
dual amplifier offers an array of dynamic specifications
including 1V/µs slew rate (min), A ≥ 1, and 8MHz band-
width (typ). Complementing these outstanding parameters is
a very low noise specification of 4.3nV/√Hz at 1kHz (typ),
6nV/√Hz (max).
VCL
• Low Input Noise Voltage Density at 1kHz . 6nV/√Hz (Max)
4.3nV/√Hz (Typ)
• High Slew Rate. . . . . . . . . . . . . . . . . . . . . . . .1V/µs (Min)
3V/µs (Typ)
Fabricated using the Intersil standard high frequency D.I.
process, these operational amplifiers also offer excellent
input specifications such as 2.5mV (max) offset voltage and
75nA (max) offset current. Complementing these specifica-
tions are 100dB (min) open loop gain and 60dB channel sep-
aration (min). Economically, the HA-5102/883 also
consumes a very moderate amount of supply power
180mW/ package.
• Unity Gain Bandwidth . . . . . . . . . . . . . . . . . 8MHz(Typ)
• High Open Loop Gain (Full Temp) . . . . . 100kV/V (Min)
250kV/V (Typ)
• High CMRR, PSRR (Full Temp). . . . . . . . . . . 86dB (Min)
100dB
(Typ)
o
• Low Offset Voltage Drift . . . . . . . . . . . . . . 3µV/ C (Typ)
This impressive combination of features make this amplifier
ideally suited for designs ranging from audio amplifiers and
active filters to the most demanding signal conditioning and
instrumentation circuits.
• No Crossover Distortion
• Standard Dual Pinout
Applications
Ordering Information
• High Quality Audio Preamplifiers
PART
TEMPERATURE
RANGE
• High Q Active Filters
NUMBER
PACKAGE
8 Pin Can
HA2-5102/883
HA4-5102/883
HA7-5102/883
-55oC to +125oC
-55oC to +125oC
-55oC to +125oC
• Low Noise Function Generators
• Low Distortion Oscillators
• Low Noise Comparators
20 Lead Ceramic LCC
8 Lead CerDIP
Pinouts
HA-5102/883
(CERDIP)
HA-5102/883
(CLCC)
HA-5102/883
(METAL CAN)
TOP VIEW
TOP VIEW
TOP VIEW
V+
OUT1
-IN1
+IN1
V-
V+
1
2
3
4
8
7
6
5
8
1
7
5
3
1
OUT2
OUT1
2
20 19
OUT2
-IN2
+IN2
1
-
1
2
18
17
16
15
14
4
5
6
7
8
NC
NC
1
+
+
-
-
+
- +
-IN1
-IN2
2
6
2
-
-IN1
OUT2
NC
2
+
NC
+IN1
NC
+
-
+IN2
3
+IN1
-IN2
NC
4
V -
9
10 11 12 13
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Spec Number 511019-883
FN3709
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
109
Specifications HA-5102/883
Absolute Maximum Ratings
Thermal Information
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . 40V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
Voltage at Either Input Terminal. . . . . . . . . . . . . . . . . . . . . . V+ to V-
Peak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
Thermal Resistance
CerDIP Package . . . . . . . . . . . . . . . . . . . 115oC/W
Ceramic LCC Package . . . . . . . . . . . . . .
65oC/W
Metal Can Package . . . . . . . . . . . . . . . . . 155oC/W
θJA
θJC
28oC/W
15oC/W
67oC/W
(One Amplifier Shorted to Ground) Package Power Dissipation Limit at +75oC for TJ ≤ +175oC
Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . +175oC
Storage Temperature Range . . . . . . . . . . . . . . . . . -65oC to +150oC
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V
Lead Temperature (Soldering 10s). . . . . . . . . . . . . . . . . . . . +300oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870mW
Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.54W
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645mW
Package Power Dissipation Derating Factor Above +75oC
CerDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7mW/oC
Ceramic LCC Package . . . . . . . . . . . . . . . . . . . . . . . . 15.4mW/oC
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5mW/oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Temperature Range. . . . . . . . . . . . . . . . -55oC to +125oC
Operating Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . ±5V to ±15V
VINCM ≤ 1/2 (V+ - V-)
L ≥ 2kΩ
R
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 100Ω, RLOAD = 500kΩ, VOUT = 0V, Unless Otherwise Specified.
LIMITS
GROUP A
PARAMETERS
SYMBOL
CONDITIONS
VCM = 0V
SUBGROUPS TEMPERATURE
MIN
MAX
2.0
UNITS
mV
Input Offset Voltage
VIO
1
+25oC
+125oC, -55oC
+25oC
-2.0
-2.5
2, 3
1
2.5
mV
Input Bias Current
+IB
-IB
IIO
VCM = 0V,
+RS = 10kΩ,
-RS = 100Ω
-200
-325
200
325
nA
2, 3
+125oC, -55oC
nA
VCM = 0V,
+RS = 100Ω,
-RS = 10kΩ
1
+25oC
-200
-325
200
325
nA
nA
2, 3
+125oC, -55oC
Input Offset Current
VCM = 0V,
+RS = 10kΩ,
-RS = 10kΩ
1
+25oC
-75
75
nA
nA
2, 3
+125oC, -55oC
-125
125
Common Mode Range
+CMR
-CMR
V+ = +3V, V- = -27V
1
2, 3
1
+25oC
+125oC, -55oC
+25oC
+12
+12
-
-
V
V
-
V+ = +27V, V- = -3V
-12
V
2, 3
4
+125oC, -55oC
+25oC
-
-12
V
Large Signal Voltage
Gain
+AVOL
VOUT = 0V and +10V,
RL = 2kΩ
100
100
100
100
86
-
-
-
-
-
-
kV/V
kV/V
kV/V
kV/V
dB
5, 6
4
+125oC, -55oC
+25oC
-AVOL
VOUT = 0V and -10V,
RL = 2kΩ
5, 6
1
+125oC, -55oC
+25oC
Common Mode
Rejection Ratio
+CMRR
∆VCM = +5V,
V+ = +10V, V- = -20V,
2, 3
+125oC, -55oC
86
dB
VOUT = -5V
-CMRR
∆VCM = -5V,
V+ = +20V, V- = -10V,
1
+25oC
86
86
-
-
dB
dB
2, 3
+125oC, -55oC
VOUT = +5V
Spec Number 511019-883
110
Specifications HA-5102/883
TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
Device Tested at: VSUPPLY = ±15V, RSOURCE = 100Ω, RLOAD = 500kΩ, VOUT = 0V, Unless Otherwise Specified.
LIMITS
GROUP A
PARAMETERS
SYMBOL
CONDITIONS
RL = 2kΩ
SUBGROUPS TEMPERATURE
MIN
MAX
UNITS
V
Output Voltage Swing
+VOUT1
1
2, 3
1
+25oC
+125oC, -55oC
+25oC
10
10
-
-
-
V
-VOUT1
+VOUT2
-VOUT2
+IOUT
-IOUT
RL = 2kΩ
-10
-10
-
V
2, 3
1
+125oC, -55oC
+25oC
-
V
RL = 10kΩ
12
12
-
V
2, 3
1
+125oC, -55oC
+25oC
-
V
RL = 10kΩ
-12
-12
-
V
2, 3
1
+125oC, -55oC
+25oC
-
V
Output Current
VOUT = -5V
10
10
-
mA
mA
mA
mA
mA
mA
mA
mA
dB
dB
2, 3
1
+125oC, -55oC
+25oC
-
VOUT = +5V
-10
-10
5.0
6.0
-
2, 3
1
+125oC, -55oC
+25oC
-
Quiescent Power Supply
Current
+ICC
VOUT = 0V, IOUT = 0mA
VOUT = 0V, IOUT = 0mA
-
2, 3
1
+125oC, -55oC
+25oC
-
-ICC
-5.0
-6.0
86
86
2, 3
1
+125oC, -55oC
+25oC
-
Power Supply
Rejection Ratio
+PSRR
∆VSUP = 10V,
V+ = +10V, V- = -15V
V+ = +20V, V- = -15V
-
2, 3
+125oC, -55oC
-
-PSRR
∆VSUP = 10V,
V+ = +15V, V- = -10V
V+ = +15V, V- = -20V
1
+25oC
86
86
-
-
dB
dB
2, 3
+125oC, -55oC
TABLE 2. AC ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 2kΩ, CLOAD = 50pF, AVCL = +1V/V, Unless Otherwise Specified.
LIMITS
GROUP A
PARAMETERS
Slew Rate
SYMBOL
+SR
CONDITIONS
SUBGROUPS TEMPERATURE
MIN
MAX
UNITS
V/µs
V/µs
ns
VOUT = -3V to +3V
4
4
4
+25oC
+25oC
+25oC
1
1
-
-
-
-SR
VOUT = +3V to -3V
Rise and Fall Time
Overshoot
TR
VOUT = 0 to +200mV
10% ≤ TR ≤ 90%
200
TF
VOUT = 0 to -200mV
10% ≤ TF ≤ 90%
4
+25oC
-
200
ns
+OS
-OS
VOUT = 0 to +200mV
4
4
+25oC
+25oC
-
-
35
35
%
%
V
OUT = 0 to -200mV
Spec Number 511019-883
111
Specifications HA-5102/883
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS
Device Characterized at: VSUPPLY = ±15V, RLOAD = 2kΩ, CLOAD = 50pF, AVCL = 1V/V, Unless Otherwise Specified.
LIMITS
PARAMETERS
Differential Input
SYMBOL
CONDITIONS
VCM = 0V
NOTES
TEMPERATURE
MIN
MAX
UNITS
RIN
1
+25oC
250
-
kΩ
Resistance
Input Noise Voltage
Density
EN
RS = 20Ω,
O = 1000Hz
1
1
+25oC
+25oC
-
6
3
-
nV/√Hz
pA/√Hz
kHz
f
Input Noise Current
Density
IN
RS = 2MΩ,
O = 1000Hz
-
f
Full Power
Bandwidth
FPBW
CLSG
VPEAK = 10V
1, 2
1
+25oC
16
+1
Minimum Closed Loop
Stable Gain
RL = 2kΩ, CL = 50pF
Open Loop
-55oC to +125oC
-
V/V
Output Resistance
ROUT
PC
1
+25oC
-
-
360
180
Ω
Quiescent Power
Consumption
VOUT = 0V, IOUT
=
1, 3
-55oC to +125oC
mW
0mA
Channel Separation
CS
R
S = 1kΩ,
1
+25oC
60
-
dB
AVCL = 100V/V,
VIN = 100mVPEAK at
10kHz Referred to
Input
NOTES:
1. Parameters listed in Table 3 are controlled via design or process parameters and are not directly tested at final production. These pa-
rameters are lab characterized upon initial design release, or upon design changes. These parameters are guaranteed by characteriza-
tion based upon data from multiple production runs which reflect lot to lot and within lot variation.
2. Full Power Bandwidth guarantee based on Slew Rate measurement using FPBW = Slew Rate/(2πVPEAK).
3. Quiescent Power Consumption based upon Quiescent Supply Current test maximum. (No load on outputs.).
TABLE 4. ELECTRICAL TEST REQUIREMENTS
MIL-STD-883 TEST REQUIREMENTS
Interim Electrical Parameters (Pre Burn-In)
Final Electrical Test Parameters
Group A Test Requirements
SUBGROUPS (SEE TABLES 1 AND 2)
1
1 (Note 1), 2, 3, 4, 5, 6
1, 2, 3, 4, 5, 6
1
Groups C and D Endpoints
NOTE:
1. PDA applies to Subgroup 1 only.
Spec Number 511019-883
112
HA-5102/883
Die Characteristics
DIE DIMENSIONS:
98.4 x 67.3 x 19 mils ± 1 mils
2500 x 1710 x 483µm ± 25.4µm
METALLIZATION:
Type: Al, 1% Cu
Thickness: 16kÅ ± 2kÅ
GLASSIVATION:
Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.)
Silox Thickness: 12kÅ ± 2kÅ
Nitride Thickness: 3.5kÅ ± 1.5kÅ
WORST CASE CURRENT DENSITY:
5
2
1.43 x 10 A/cm at 10mA
SUBSTRATE POTENTIAL (Powered Up):
Unbiased
TRANSISTOR COUNT: 93
PROCESS: Bipolar Dielectric Isolation
Metallization Mask Layout
HA-5102/883
V-
+IN1
-IN1
OUT1
+IN2
-IN2
OUT2
V+
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Spec Number 511019-883
113
相关型号:
©2020 ICPDF网 联系我们和版权申明