QX6700 [INTEL]
on 65 nm Process in the 775-land LGA Package supporting Intel 64 architecture; 在775-土地LGA封装支持英特尔64位架构的65纳米工艺型号: | QX6700 |
厂家: | INTEL |
描述: | on 65 nm Process in the 775-land LGA Package supporting Intel 64 architecture |
文件: | 总98页 (文件大小:1450K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
Intel Core™2 Extreme Quad-Core
Δ
Processor QX6000 Sequence and
®
Intel Core™2 Quad Processor
Δ
Q6000 Sequence
Datasheet
—on 65 nm Process in the 775-land LGA Package supporting
±
Intel® 64architecture and Intel® Virtualization Technology
August 2007
Document Number: 315592-005
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. INTEL PRODUCTS ARE NOT
INTENDED FOR USE IN MEDICAL, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS.
Intel may make changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
®
®
The Intel Core™2 Extreme quad-core processor QX6000 sequence and Intel Core™2 quad processor Q6000 sequence may contain design defects or
errors known as errata which may cause the product to deviate from published specifications.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Δ
Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different
processor families. See http://www.intel.com/products/processor_number for details. Over time processor numbers will increment based on changes in
clock, speed, cache, FSB, or other features, and increments are not intended to represent proportional or quantitative increases in any particular
feature. Current roadmap processor number progression is not necessarily representative of future roadmaps. See www.intel.com/products/
processor_number for details.
®
Intel 64 requires a computer system with a processor, chipset, BIOS, operating system, device drivers, and applications enabled for Intel 64. Processor
will not operate (including 32-bit operation) without an Intel 64-enabled BIOS. Performance will vary depending on your hardware and software
configurations. See http://www.intel.com/technology/intel64/index.htm for more information including details on which processors support Intel 64, or
consult with your system vendor for more information.
Enabling Execute Disable Bit functionality requires a PC with a processor with Execute Disable Bit capability and a supporting operating system. Check
with your PC manufacturer on whether your system delivers Execute Disable Bit functionality.
±
®
®
Intel Virtualization Technology requires a computer system with an enabled Intel processor, BIOS, virtual machine monitor (VMM) and, for some
uses, certain platform software enabled for it. Functionality, performance or other benefits will vary depending on hardware and software configurations
and may require a BIOS update. Software applications may not be compatible with all operating systems. Please check with your application vendor.
Intel, Pentium, Itanium, Xeon, Intel SpeedStep, andand the Intel logo are trademarks of Intel Corporation in the U.S. and other countries..
*Other names and brands may be claimed as the property of others.
Copyright © 2006–2007 Intel Corporation.
2
Datasheet
Contents
1
Introduction..............................................................................................................9
1.1
Terminology .......................................................................................................9
1.1.1 Processor Terminology............................................................................ 10
References ....................................................................................................... 11
1.2
2
Electrical Specifications........................................................................................... 13
2.1
2.2
Power and Ground Lands.................................................................................... 13
Decoupling Guidelines........................................................................................ 13
2.2.1 VCC Decoupling ..................................................................................... 13
2.2.2 VTT Decoupling...................................................................................... 13
2.2.3 FSB Decoupling...................................................................................... 14
Voltage Identification......................................................................................... 14
Reserved, Unused, and TESTHI Signals ................................................................ 16
Voltage and Current Specification........................................................................ 17
2.5.1 Absolute Maximum and Minimum Ratings .................................................. 17
2.5.2 DC Voltage and Current Specification........................................................ 18
2.5.3 VCC Overshoot ...................................................................................... 21
2.5.4 Die Voltage Validation............................................................................. 21
Signaling Specifications...................................................................................... 22
2.6.1 FSB Signal Groups.................................................................................. 22
2.6.2 CMOS and Open Drain Signals ................................................................. 24
2.6.3 Processor DC Specifications ..................................................................... 24
2.6.3.1 GTL+ Front Side Bus Specifications ............................................. 26
Clock Specifications........................................................................................... 26
2.7.1 Front Side Bus Clock (BCLK[1:0]) and Processor Clocking............................ 26
2.7.2 FSB Frequency Select Signals (BSEL[2:0])................................................. 27
2.7.3 Phase Lock Loop (PLL) and Filter .............................................................. 27
2.7.4 BCLK[1:0] Specifications......................................................................... 28
2.3
2.4
2.5
2.6
2.7
3
Package Mechanical Specifications .......................................................................... 31
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
Package Mechanical Drawing............................................................................... 31
Processor Component Keep-Out Zones................................................................. 35
Package Loading Specifications ........................................................................... 35
Package Handling Guidelines............................................................................... 35
Package Insertion Specifications.......................................................................... 36
Processor Mass Specification............................................................................... 36
Processor Materials............................................................................................ 36
Processor Markings............................................................................................ 36
Processor Land Coordinates................................................................................ 38
4
5
Land Listing and Signal Descriptions ....................................................................... 39
4.1
4.2
Processor Land Assignments............................................................................... 39
Alphabetical Signals Reference............................................................................ 62
Thermal Specifications and Design Considerations .................................................. 71
5.1
Processor Thermal Specifications......................................................................... 71
5.1.1 Thermal Specifications ............................................................................ 71
5.1.2 Thermal Metrology ................................................................................. 76
Processor Thermal Features................................................................................ 76
5.2.1 Thermal Monitor..................................................................................... 76
5.2.2 Thermal Monitor 2.................................................................................. 77
5.2.3 On-Demand Mode .................................................................................. 78
5.2.4 PROCHOT# Signal.................................................................................. 79
5.2
Datasheet
3
5.2.5 THERMTRIP# Signal................................................................................79
Platform Environment Control Interface (PECI) ......................................................80
5.3.1 Introduction...........................................................................................80
5.3.1.1 TCONTROL and TCC Activation on PECI-Based Systems.....................80
5.3.2 PECI Specifications .................................................................................81
5.3.2.1 PECI Device Address..................................................................81
5.3.2.2 PECI Command Support.............................................................81
5.3.2.3 PECI Fault Handling Requirements...............................................81
5.3.2.4 PECI GetTemp0() and GetTemp1() Error Code Support...................81
5.3
6
Features ..................................................................................................................83
6.1
6.2
Power-On Configuration Options ..........................................................................83
Clock Control and Low Power States.....................................................................83
6.2.1 Normal State .........................................................................................84
6.2.2 HALT and Extended HALT Powerdown States ..............................................84
6.2.2.1 HALT Powerdown State ..............................................................84
6.2.2.2 Extended HALT Powerdown State ................................................85
6.2.3 Stop Grant State ....................................................................................85
6.2.4 Extended HALT Snoop or HALT Snoop State,
Stop Grant Snoop State...........................................................................86
6.2.4.1 HALT Snoop State, Stop Grant Snoop State ..................................86
6.2.4.2 Extended HALT Snoop State .......................................................86
7
Boxed Processor Specifications................................................................................87
7.1
Mechanical Specifications....................................................................................88
7.1.1 Boxed Processor Cooling Solution Dimensions.............................................88
7.1.2 Boxed Processor Fan Heatsink Weight .......................................................90
7.1.3 Boxed Processor Retention Mechanism and Heatsink Attach Clip Assembly .....90
Electrical Requirements ......................................................................................90
7.2.1 Fan Heatsink Power Supply ......................................................................90
Thermal Specifications........................................................................................92
7.3.1 Boxed Processor Cooling Requirements......................................................92
7.3.2 Fan Speed Control Operation (Intel® Core™2 Extreme processors only).........94
7.3.3 Fan Speed Control Operation (Intel® Core™2 Quad processor) .....................94
7.2
7.3
8
Debug Tools Specifications ......................................................................................97
8.1
Logic Analyzer Interface (LAI) .............................................................................97
8.1.1 Mechanical Considerations .......................................................................97
8.1.2 Electrical Considerations..........................................................................97
4
Datasheet
Figures
1
2
3
4
5
6
7
8
9
VCC Static and Transient Tolerance............................................................................. 20
VCC Overshoot Example Waveform ............................................................................. 21
Differential Clock Waveform ...................................................................................... 29
Differential Clock Crosspoint Specification ................................................................... 30
Differential Measurements......................................................................................... 30
Processor Package Assembly Sketch........................................................................... 31
Processor Package Drawing Sheet 1 of 3 ..................................................................... 32
Processor Package Drawing Sheet 2 of 3 ..................................................................... 33
Processor Package Drawing Sheet 3 of 3 ..................................................................... 34
10 Processor Top-Side Markings Example for 1066 MHz Processors ..................................... 36
11 Processor Top-Side Markings Example for 1333 MHz Processors ..................................... 37
12 Processor Land Coordinates and Quadrants (Top View) ................................................. 38
13 land-out Diagram (Top View – Left Side)..................................................................... 40
14 land-out Diagram (Top View – Right Side)................................................................... 41
15 Thermal Profile for 130 W Processors.......................................................................... 73
16 Thermal Profile for 105 W Processors.......................................................................... 74
17 Thermal Profile 95 W Processors ................................................................................ 75
18 Case Temperature (TC) Measurement Location ............................................................ 76
19 Thermal Monitor 2 Frequency and Voltage Ordering...................................................... 78
20 Conceptual Fan Control on PECI-Based Platforms ......................................................... 80
21 Processor Low Power State Machine ........................................................................... 84
22 Mechanical Representation of the Boxed Processor ....................................................... 87
23 Space Requirements for the Boxed Processor (Side View).............................................. 88
24 Space Requirements for the Boxed Processor (Top View)............................................... 89
25 Space Requirements for the Boxed Processor (Overall View).......................................... 89
26 Boxed Processor Fan Heatsink Power Cable Connector Description.................................. 91
27 Baseboard Power Header Placement Relative to Processor Socket................................... 92
28 Boxed Processor Fan Heatsink Airspace Keepout Requirements (Side 1 View)................... 93
29 Boxed Processor Fan Heatsink Airspace Keepout Requirements (Side 2 View)................... 93
30 Boxed Processor Fan Heatsink Set Points..................................................................... 95
Datasheet
5
Tables
1
2
3
4
5
6
7
8
9
References ..............................................................................................................11
Voltage Identification Definition..................................................................................15
Absolute Maximum and Minimum Ratings ....................................................................17
Voltage and Current Specifications..............................................................................18
VCC Static and Transient Tolerance .............................................................................19
VCC Overshoot Specifications......................................................................................21
FSB Signal Groups....................................................................................................22
Signal Characteristics................................................................................................23
Signal Reference Voltages .........................................................................................23
10 GTL+ Signal Group DC Specifications ..........................................................................24
11 Open Drain and TAP Output Signal Group DC Specifications ...........................................24
12 CMOS Signal Group DC Specifications..........................................................................25
13 PECI DC Electrical Limits ...........................................................................................25
14 GTL+ Bus Voltage Definitions.....................................................................................26
15 Core Frequency to FSB Multiplier Configuration.............................................................26
16 BSEL[2:0] Frequency Table for BCLK[1:0] ...................................................................27
17 Front Side Bus Differential BCLK Specifications.............................................................28
18 FSB Differential Clock Specifications (1066 MHz FSB) ....................................................28
19 FSB Differential Clock Specifications (1333 MHz FSB) ....................................................29
20 Processor Loading Specifications.................................................................................35
21 Package Handling Guidelines......................................................................................35
22 Processor Materials...................................................................................................36
23 Alphabetical Land Assignments...................................................................................42
24 Numerical Land Assignment.......................................................................................52
25 Signal Description.....................................................................................................62
26 Processor Thermal Specifications................................................................................72
27 Thermal Profile for 130 W Processors ..........................................................................73
28 Thermal Profile for 105 W Processors ..........................................................................74
29 Thermal Profile 95 W Processors.................................................................................75
30 GetTemp0() and GetTemp1() Error Codes....................................................................81
31 Power-On Configuration Option Signals .......................................................................83
32 Fan Heatsink Power and Signal Specifications...............................................................91
33 Fan Heatsink Power and Signal Specifications...............................................................95
6
Datasheet
Revision History
Revision
Number
Description
Date
-001
•
Initial release
November 2006
®
•
•
•
•
Added specifications for the Intel Core™2 Quad Processor Q6600
Updated Table 8, “Signal Characteristics”.
-002
January 2007
July 2007
Updated VTT_SEL description in Table 24.
Updated Table 29, “Fan Heatsink Power and Signal Specifications”.
®
®
•
Added specifications for the Intel Core™2 Quad Processor Q6700 and Intel Core™2
Extreme quad-core processor QX6850
-003
®
-003
-004
-005
•
•
•
Added Intel Core™2 Quad Processor Q6600 for 775_VR_CONFIG_05A
July 2007
®
Added Intel Core™2 Extreme quad-core processor QX6850
July 2007
®
Added Intel Core™2 Extreme quad-core processor QX6800
August 2007
§
Datasheet
7
Intel® Core™2 Extreme Quad-Core Processor QX6000 and
Intel® Core™2 Quad Processor Q6000 Sequence Features
• Available at 3.00 GHz (Intel® Core™2
• Binary compatible with applications running
on previous members of the Intel
microprocessor line
Extreme Quad-Core Processor QX6850 only)
• Available at 2.66 GHz (Intel® Core™2
Extreme Quad-Core Processor QX6700 and
Intel® Core™2 Quad Processor Q6700 only)
• Advance Dynamic Execution
• Very deep out-of-order execution
• Enhanced branch prediction
• Optimized for 32-bit applications running on
advanced 32-bit operating systems
• Available at 2.40 GHz (Intel® Core™2 Quad
Processor Q6600 only)
• Available at 2.93 GHz (Intel® Core™2
Extreme Quad-Core Processor QX6800 only)
• Four 32-KB Level 1 data caches
• Enhanced Intel Speedstep® Technology
• Supports Intel® 64Φ architecture
• Supports Intel® Virtualization Technology
• Two 4 MB Level 2 caches
• Intel® Advanced Digital Media Boost
• Enhanced floating point and multimedia unit
for enhanced video, audio, encryption, and
3D performance
• Power Management capabilities
• System Management mode
• Multiple low-power states
• Supports Execute Disable Bit capability
• FSB frequency at 1066 MHz (Intel® Core™2
Extreme Quad-Core Processor QX6700,
QX6800 and Intel® Core™2 Quad Processor
Q6700 and Q6600 only)
• FSB frequency at 1333 MHz (Intel® Core™2
Extreme Quad-Core Processor QX6850 only)
• 8-way cache associativity provides improved
cache hit rate on load/store operations
• 775-land Package
The Intel Core™2 Extreme quad-core processor QX6000 sequence and Intel® Core™2 quad processor
Q6000 sequence deliver Intel's advanced, powerful processors for desktop PCs. The processor is
designed to deliver performance across applications and usages where end-users can truly appreciate
and experience the performance. These applications include Internet audio and streaming video,
image processing, video content creation, speech, 3D, CAD, games, multimedia, and multitasking
user environments.
Intel® 64Φ architecture enables the processor to execute operating systems and applications written
to take advantage of the Intel 64 architecture. The processor, supporting Enhanced Intel Speedstep®
technology, allows tradeoffs to be made between performance and power consumption.
The Core™2 Extreme quad-core processor QX6000 sequence and Intel® Core™2 quad processor
Q6000 sequence also include the Execute Disable Bit capability. This feature, combined with a
supported operating system, allows memory to be marked as executable or non-executable.
The Core™2 Extreme quad-core processor QX6000 sequence and Intel® Core™2 quad processor
Q6000 sequence support Intel® Virtualization Technology. Virtualization Technology provides silicon-
based functionality that works together with compatible Virtual Machine Monitor (VMM) software to
improve on software-only solutions.
§ §
8
Datasheet
Introduction
1
Introduction
The Intel® Core™2 Extreme quad-core processor QX6000 sequence and Intel® Core™2
quad processor Q6000 sequence are the first desktop quad-core processors that
combine the performance and power efficiencies of four low-power microarchitecture
cores to enable a new level of multi-tasking, multi-media, and gaming experiences.
They are 64-bit processors that maintain compatibility with IA-32 software.
The processors use Flip-Chip Land Grid Array (FC-LGA6) package technology, and plug
into a 775-land surface mount, Land Grid Array (LGA) socket, referred to as the
LGA775 socket. The processors are based on 65 nm process technology.
Note:
Note:
In this document the Intel® Core™2 Extreme quad-core processor QX6000 sequence
and Intel® Core™2 quad processor Q6000 sequence are referred to simply as
“processor.”
In this document the Intel® Core™2 quad-core processor Q6000 sequence refers to the
Intel® Core™2 quad processor Q6600 and Q6700. The Intel® Core™2 Extreme quad-
core processor QX6000 sequence refers to the Intel® Core™2 Extreme quad-core
processors QX6700, QX6800, and QX6850.
The processor supports all the existing Streaming SIMD Extensions 2 (SSE2) and
Streaming SIMD Extensions 3 (SSE3). The processor supports several advanced
technologies including Execute Disable Bit, Intel® 64 architecture, and Intel®
Virtualization Technology (VT).
The processor's front side bus (FSB) uses a split-transaction, deferred reply protocol
like the Intel® Pentium® 4 processor. The FSB uses Source-Synchronous Transfer (SST)
of address and data to improve performance by transferring data four times per bus
clock (4X data transfer rate, as in AGP 4X). Along with the 4X data bus, the address
bus can deliver addresses two times per bus clock and is referred to as a "double-
clocked" or 2X address bus. Working together, the 4X data bus and 2X address bus
provide a data bus bandwidth of up to 10.7 GB/s.
The processor uses some of the infrastructure already enabled by the
775_VR_CONFIG_05 platforms including heatsink, heatsink retention mechanism, and
socket. Supported platforms may need to be refreshed to ensure the correct voltage
regulation (VRD11) and PECI support is enabled. Manufacturability is a high priority;
hence, mechanical assembly may be completed from the top of the baseboard and
should not require any special tooling.
The processor includes an address bus power-down capability that removes power from
the address and data signals when the FSB is not in use. This feature is always enabled
on the processor.
1.1
Terminology
A ‘#’ symbol after a signal name refers to an active low signal, indicating a signal is in
the active state when driven to a low level. For example, when RESET# is low, a reset
has been requested. Conversely, when NMI is high, a nonmaskable interrupt has
occurred. In the case of signals where the name does not imply an active state but
describes part of a binary sequence (such as address or data), the ‘#’ symbol implies
that the signal is inverted. For example, D[3:0] = ‘HLHL’ refers to a hex ‘A’, and
D[3:0]# = ‘LHLH’ also refers to a hex ‘A’ (H= High logic level, L= Low logic level).
Datasheet
9
Introduction
“Front Side Bus” refers to the interface between the processor and system core logic
(a.k.a. the chipset components). The FSB is a multiprocessing interface to processors,
memory, and I/O.
1.1.1
Processor Terminology
Commonly used terms are explained here for clarification:
• Intel® Core™2 Extreme quad-core processor QX6000 sequence — Quad
core processor in the FC-LGA6 package with a 2x4 MB L2 cache.
• Intel® Core™2 quad processor Q6000 sequence — Quad core processor in the
FC-LGA6 package with a 2x4 MB L2 cache.
• Processor — For this document, the term processor is the generic form of the
Intel® Core™2 Extreme quad-core processor QX6000 sequence and Intel® Core™2
quad processor Q6000 sequence. The processor is a single package that contains
one or more execution units.
• Keep-out zone — The area on or near the processor that system design can not
utilize.
• Processor core — Processor core die with integrated L2 cache.
• LGA775 socket — The processor mates with the system board through a surface
mount, 775-land, LGA socket.
• Integrated heat spreader (IHS) —A component of the processor package used
to enhance the thermal performance of the package. Component thermal solutions
interface with the processor at the IHS surface.
• Retention mechanism (RM) — Since the LGA775 socket does not include any
mechanical features for heatsink attach, a retention mechanism is required.
Component thermal solutions should attach to the processor via a retention
mechanism that is independent of the socket.
• FSB (Front Side Bus) — The electrical interface that connects the processor to
the chipset. Also referred to as the processor system bus or the system bus. All
memory and I/O transactions as well as interrupt messages pass between the
processor and chipset over the FSB.
• Storage conditions — Refers to a non-operational state. The processor may be
installed in a platform, in a tray, or loose. Processors may be sealed in packaging or
exposed to free air. Under these conditions, processor lands should not be
connected to any supply voltages, have any I/Os biased, or receive any clocks.
Upon exposure to “free air”(i.e., unsealed packaging or a device removed from
packaging material) the processor must be handled in accordance with moisture
sensitivity labeling (MSL) as indicated on the packaging material.
• Functional operation — Refers to normal operating conditions in which all
processor specifications, including DC, AC, system bus, signal quality, mechanical
and thermal are satisfied.
• Execute Disable Bit — The Execute Disable bit allows memory to be marked as
executable or non-executable, when combined with a supporting operating system.
If code attempts to run in non-executable memory the processor raises an error to
the operating system. This feature can prevent some classes of viruses or worms
that exploit buffer over run vulnerabilities and can thus help improve the overall
security of the system. See the Intel® Architecture Software Developer's Manual
for more detailed information.
• Intel® 64 Architecture — An enhancement to Intel's IA-32 architecture, allowing
the processor to execute operating systems and applications written to take
advantage of the Intel 64 architecture. Further details on Intel 64 architecture and
programming model can be found in the Intel Extended Memory 64 Technology
Software Developer Guide at http://www.intel.com/technology/intel64/index.htm.
10
Datasheet
Introduction
• Enhanced Intel Technology SpeedStep® Technology — Enhanced Intel
Technology SpeedStep® Technology allows trade-offs to be made between
performance and power consumptions, based on processor utilization. This may
lower average power consumption (in conjunction with OS support).
• Intel® Virtualization Technology (Intel® VT) — Intel Virtualization Technology
provides silicon-based functionality that works together with compatible Virtual
Machine Monitor (VMM) software to improve upon software-only solutions. Because
this virtualization hardware provides a new architecture upon which the operating
system can run directly, it removes the need for binary translation. Thus, it helps
eliminate associated performance overhead and vastly simplifies the design of the
VMM, in turn allowing VMMs to be written to common standards and to be more
robust. See the Intel® Virtualization Technology Specification for the IA-32 Intel®
Architecture for more details.
1.2
References
Material and concepts available in the following documents may be beneficial when
reading this document.
Table 1.
References
Document
Location
Intel® Core™2 Extreme Quad-Core Processor QX6000 Sequence http://www.intel.com/design/
and Intel® Core™2 Quad Processor Q6000 Sequence
Specification Update
processor/specupdt/
315593.htm
Intel® Core™2 Extreme Quad-Core Processor and Intel®
Core™2 Quad Processor Thermal and Mechanical Design
Guidelines
http://www.intel.com/design/
processor/designex/
315594.htm
http://www.intel.com/design/
processor/applnots/
313214.htm
Voltage Regulator-Down (VRD) 11.0 Processor Power Delivery
Design Guidelines For Desktop LGA775 Socket
Balanced Technology Extended (BTX) System Design Guide
www.formfactors.org
http://www.intel.com/
technology/computing/
vptech/index.htm
Intel® Virtualization Technology Specification for the IA-32
Intel® Architecture
http://intel.com/design/
Pentium4/guides/
302666.htm
LGA775 Socket Mechanical Design Guide
Intel® 64 and IA-32 Architecture Software Developer’s Manuals
Volume 1: Basic Architecture
http://www.intel.com/
products/processor/manuals/
http://www.intel.com/
products/processor/manuals/
Volume 2A: Instruction Set Reference, A-M
Volume 2B: Instruction Set Reference, N-Z
Volume 3A: System Programming Guide
Volume 3B: System Programming Guide
http://www.intel.com/
products/processor/manuals/
http://www.intel.com/
products/processor/manuals/
http://www.intel.com/
products/processor/manuals/
§ §
Datasheet
11
Introduction
12
Datasheet
Electrical Specifications
2
Electrical Specifications
This chapter describes the electrical characteristics of the processor interfaces and
signals. DC electrical characteristics are provided.
2.1
Power and Ground Lands
The processor has VCC (power), VTT and VSS (ground) inputs for on-chip power
distribution. All power lands must be connected to VCC, while all VSS lands must be
connected to a system ground plane. The processor VCC lands must be supplied the
voltage determined by the Voltage IDentification (VID) lands.
The signals are denoted as VTT, which provide termination for the front side bus and
power to the I/O buffers. A separate supply must be implemented for these lands, that
meets the VTT specifications outlined in Table 4.
2.2
Decoupling Guidelines
Due to its large number of transistors and high internal clock speeds, the processor is
capable of generating large current swings. This may cause voltages on power planes
to sag below their minimum specified values if bulk decoupling is not adequate. Larger
bulk storage (CBULK), such as electrolytic or aluminum-polymer capacitors, supply
current during longer lasting changes in current demand by the component, such as
coming out of an idle condition. Similarly, they act as a storage well for current when
entering an idle condition from a running condition. The motherboard must be designed
to ensure that the voltage provided to the processor remains within the specifications
listed in Table 4. Failure to do so can result in timing violations or reduced lifetime of
the component.
2.2.1
2.2.2
V
Decoupling
CC
VCC regulator solutions need to provide sufficient decoupling capacitance to satisfy the
processor voltage specifications. This includes bulk capacitance with low effective series
resistance (ESR) to keep the voltage rail within specifications during large swings in
load current. In addition, ceramic decoupling capacitors are required to filter high
frequency content generated by the front side bus and processor activity. Consult the
Voltage Regulator-Down (VRD) 11.0 Processor Power Delivery Design Guidelines For
Desktop LGA775 Socket.
V Decoupling
TT
Decoupling must be provided on the motherboard. Decoupling solutions must be sized
to meet the expected load. To insure compliance with the specifications, various factors
associated with the power delivery solution must be considered including regulator
type, power plane and trace sizing, and component placement. A conservative
decoupling solution would consist of a combination of low ESR bulk capacitors and high
frequency ceramic capacitors.
Datasheet
13
Electrical Specifications
2.2.3
FSB Decoupling
The processor integrates signal termination on the die. In addition, some of the high
frequency capacitance required for the FSB is included on the processor package.
However, additional high frequency capacitance must be added to the motherboard to
properly decouple the return currents from the front side bus. Bulk decoupling must
also be provided by the motherboard for proper [A]GTL+ bus operation.
2.3
Voltage Identification
The Voltage Identification (VID) specification for the processor is defined by the Voltage
Regulator-Down (VRD) 11.0 Processor Power Delivery Design Guidelines For Desktop
LGA775 Socket. The voltage set by the VID signals is the reference VR output voltage
to be delivered to the processor VCC pins (see Chapter 2.5.3 for VCC overshoot
specifications). Refer to Table 12 for the DC specifications for these signals. Voltages
for each processor frequency is provided in Table 4.
Individual processor VID values may be calibrated during manufacturing such that two
devices at the same core speed may have different default VID settings. This is
reflected by the VID Range values provided in Table 4. Refer to the Intel® Core™2
Extreme Quad-Core Processor QX6000 Sequence and Intel® Core™2 Quad Processor
Q6000 Sequence Specification Update for further details on specific valid core
frequency and VID values of the processor. Note that this differs from the VID
employed by the processor during a power management event (Thermal Monitor 2,
Enhanced Intel SpeedStep® Technology, or Extended HALT State).
The processor uses six voltage identification signals, VID[7:0], to support automatic
selection of power supply voltages. Table 2 specifies the voltage level corresponding to
the state of VID[7:0]. A ‘1’ in this table refers to a high voltage level and a ‘0’ refers to
a low voltage level. If the processor socket is empty (VID[7:0] = 11111111), or the
voltage regulation circuit cannot supply the voltage that is requested, it must disable
itself. The Voltage Regulator-Down (VRD) 11.0 Processor Power Delivery Design
Guidelines For Desktop LGA775 Socket defines VID [7:0], VID7 and VID0 are not used
on the processor; VID0 and VID7 are strapped to VSS on the processor package. VID0
and VID7 must be connected to the VR controller for compatibility with future
processors.
The processor provides the ability to operate while transitioning to an adjacent VID and
its associated processor core voltage (VCC). This will represent a DC shift in the load
line. It should be noted that a low-to-high or high-to-low voltage state change may
result in as many VID transitions as necessary to reach the target core voltage.
Transitions above the specified VID are not permitted. Table 4 includes VID step sizes
and DC shift ranges. Minimum and maximum voltages must be maintained as shown in
Table 5 and Figure 1 as measured across the VCC_SENSE and VSS_SENSE lands.
The VRM or VRD utilized must be capable of regulating its output to the value defined
by the new VID. DC specifications for dynamic VID transitions are included in Table 4
and Table 5. Refer to the Voltage Regulator-Down (VRD) 11.0 Processor Power Delivery
Design Guidelines For Desktop LGA775 Socket for further details.
14
Datasheet
Electrical Specifications
Table 2.
Voltage Identification Definition
VID6 VID5 VID4 VID3 VID2 VID1 VCC_MAX
VID6 VID5 VID4 VID3 VID2 VID1 VCC_MAX
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0.8500
0.8625
0.8750
0.8875
0.9000
0.9125
0.9250
0.9375
0.9500
0.9625
0.9750
0.9875
1.0000
1.0125
1.0250
1.0375
1.0500
1.0625
1.0750
1.0875
1.1000
1.1125
1.1250
1.1375
1.1500
1.1625
1.1750
1.1875
1.2000
1.2125
1.2250
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1.2375
1.2500
1.2625
1.2750
1.2875
1.3000
1.3125
1.3250
1.3375
1.3500
1.3625
1.3750
1.3875
1.4000
1.4125
1.4250
1.4375
1.4500
1.4625
1.4750
1.4875
1.5000
1.5125
1.5250
1.5375
1.5500
1.5625
1.5750
1.5875
1.6000
OFF
Datasheet
15
Electrical Specifications
2.4
Reserved, Unused, and TESTHI Signals
All RESERVED lands must remain unconnected. Connection of these lands to VCC, VSS,
VTT, or to any other signal (including each other) can result in component malfunction
or incompatibility with future processors. See Chapter 4 for a land listing of the
processor and the location of all RESERVED lands.
In a system level design, on-die termination has been included by the processor to
allow signals to be terminated within the processor silicon. Most unused GTL+ inputs
should be left as no connects as GTL+ termination is provided on the processor silicon.
However, see Table 7 for details on GTL+ signals that do not include on-die termination.
Unused active high inputs, should be connected through a resistor to ground (VSS).
Unused outputs can be left unconnected, however this may interfere with some TAP
functions, complicate debug probing, and prevent boundary scan testing. A resistor
must be used when tying bidirectional signals to power or ground. When tying any
signal to power or ground, a resistor will also allow for system testability. Resistor
values should be within ± 20% of the impedance of the motherboard trace for front
side bus signals. For unused GTL+ input or I/O signals, use pull-up resistors of the
same value as the on-die termination resistors (RTT). For details see Table 14.
TAP and CMOS signals do not include on-die termination. Inputs and utilized outputs
must be terminated on the motherboard. Unused outputs may be terminated on the
motherboard or left unconnected. Note that leaving unused outputs unterminated may
interfere with some TAP functions, complicate debug probing, and prevent boundary
scan testing.
All TESTHI[13,11:10,7:0] lands should be individually connected to VTT via a pull-up
resistor which matches the nominal trace impedance.
The TESTHI signals may use individual pull-up resistors or be grouped together as
detailed below. A matched resistor must be used for each group:
• TESTHI[1:0]
• TESTHI[7:2]
• TESTHI10 – cannot be grouped with other TESTHI signals
• TESTHI11 – cannot be grouped with other TESTHI signals
• TESTHI13 – cannot be grouped with other TESTHI signals
However, use of boundary scan test will not be functional if these lands are connected
together. For optimum noise margin, all pull-up resistor values used for
TESTHI[13,11:10,7:0] lands should have a resistance value within ±20% of the
impedance of the board transmission line traces. For example, if the nominal trace
impedance is 50 Ω, then a value between 40 Ω and 60 Ω should be used.
16
Datasheet
Electrical Specifications
2.5
Voltage and Current Specification
2.5.1
Absolute Maximum and Minimum Ratings
Table 3 specifies absolute maximum and minimum ratings only and lie outside the
functional limits of the processor. Within functional operation limits, functionality and
long-term reliability can be expected.
At conditions outside functional operation condition limits, but within absolute
maximum and minimum ratings, neither functionality nor long-term reliability can be
expected. If a device is returned to conditions within functional operation limits after
having been subjected to conditions outside these limits, but within the absolute
maximum and minimum ratings, the device may be functional, but with its lifetime
degraded depending on exposure to conditions exceeding the functional operation
condition limits.
At conditions exceeding absolute maximum and minimum ratings, neither functionality
nor long-term reliability can be expected. Moreover, if a device is subjected to these
conditions for any length of time then, when returned to conditions within the
functional operating condition limits, it will either not function, or its reliability will be
severely degraded.
Although the processor contains protective circuitry to resist damage from static
electric discharge, precautions should always be taken to avoid high static voltages or
electric fields.
Table 3.
Absolute Maximum and Minimum Ratings
Symbol
VCC
Parameter
Min
Max
Unit Notes1,2
Core voltage with respect to VSS
–0.3
1.55
V
V
-
-
FSB termination voltage with
respect to VSS
VTT
TC
–0.3
1.55
See
Chapter 5
See
Chapter 5
Processor case temperature
°C
°C
-
3, 4,
5
TSTORAGE
Processor storage temperature
–40
85
NOTES:
1. For functional operation, all processor electrical, signal quality, mechanical and thermal
specifications must be satisfied.
2. Excessive overshoot or undershoot on any signal will likely result in permanent damage to the
processor.
3. Storage temperature is applicable to storage conditions only. In this scenario, the processor
must not receive a clock, and no lands can be connected to a voltage bias. Storage within these
limits will not affect the long-term reliability of the device. For functional operation, Refer to the
processor case temperature specifications.
4. This rating applies to the processor and does not include any tray or packaging.
5. Failure to adhere to this specification can affect the long term reliability of the processor.
Datasheet
17
Electrical Specifications
2.5.2
DC Voltage and Current Specification
Table 4.
Voltage and Current Specifications
2
Symbol
VID Range
Parameter
Min
Typ
Max
Unit Notes1,
3
VID
0.8500
—
1.5
V
Processor Number
VCC for
775_VR_CONFIG_05
QX6850
QX6800
QX6700
Q6700
3.00 GHz
2.93 GHz
2.66 GHz
2.66 GHz
2.40 GHz
Refer to Table 5 and
Figure 1
4, 5,
6
VCC
V
V
Q6600
VCC_BOOT
VCCPLL
Default VCC voltage for initial power up
PLL VCC
—
1.10
1.50
—
- 5%
+ 5%
Processor Number
ICC for
775_VR_CONFIG_05B
QX6850
QX6800
QX6700
Q66007
3.00 GHz
125
125
125
115
8
—
—
A
2.93 GHz
2.66 GHz
ICC
2.40 GHz
Processor Number
ICC for
775_VR_CONFIG_05A
8
Q6700
Q66009
2.66 GHz
2.40 GHz
115
115
10
ITCC
VTT
ICC TCC active
—
—
ICC
A
V
FSB termination voltage
(DC + AC specifications)
11, 12
1.14
1.20
1.26
VTT_OUT_LEFT
and
DC Current that may be drawn from
—
—
—
580
mA
A
VTT_OUT_RIGHT VTT_OUT_LEFT and VTT_OUT_RIGHT per pin
ICC
ICC for VTT supply before VCC stable
8.0
7.0
13
ITT
—
ICC for VTT supply after VCC stable
ICC_VCCPLL
ICC_GTLREF
NOTES:
ICC for PLL land
ICC for GTLREF
—
—
—
130
200
mA
-—
μA
1. Unless otherwise noted, all specifications in this table are based on estimates and simulations or empirical data.
These specifications will be updated with characterized data from silicon measurements at a later date.
2. Adherence to the voltage specifications for the processor are required to ensure reliable processor operation.
3. Each processor is programmed with a maximum valid voltage identification value (VID), which is set at
manufacturing and can not be altered. Individual maximum VID values are calibrated during manufacturing such
that two processors at the same frequency may have different settings within the VID range. Note this differs
from the VID employed by the processor during a power management event (Thermal Monitor 2, Enhanced Intel
SpeedStep® Technology, or Extended HALT State).
4. These voltages are targets only. A variable voltage source should exist on systems in the event that a different
voltage is required. See Section 2.3 and Table 2 for more information.
5. The voltage specification requirements are measured across VCC_SENSE and VSS_SENSE lands at the socket
with a 100 MHz bandwidth oscilloscope, 1.5 pF maximum probe capacitance, and 1 MΩ minimum impedance.
The maximum length of ground wire on the probe should be less than 5 mm. Ensure external noise from the
system is not coupled into the oscilloscope probe.
6. Refer to Table 5 and Figure 1 for the minimum, typical, and maximum VCC allowed for a given current. The
processor should not be subjected to any VCC and ICC combination wherein VCC exceeds VCC_MAX for a given
current.
7. These processors have CPUID = 06F7h
18
Datasheet
Electrical Specifications
8. ICC_MAX specification is based on the VCC_MAX loadline. Refer to Figure 1 for details.
9. These Processors have CPUID = 06FBh
10.The maximum instantaneous current the processor will draw while the thermal control circuit is active (as
indicated by the assertion of PROCHOT#) is the same as the maximum ICC for the processor.
11.VTT must be provided via a separate voltage source and not be connected to VCC. This specification is measured
at the land.
12.Baseboard bandwidth is limited to 20 MHz.
13.This is maximum total current drawn from VTT plane by only the processor. This specification does not include
the current coming from RTT (through the signal line). Refer to the Voltage Regulator-Down (VRD) 11.0 Processor
Power Delivery Design Guidelines For Desktop LGA775 Socket to determine the total ITT drawn by the system.
This parameter is based on design characterization and is not tested.
Table 5.
VCC Static and Transient Tolerance
Voltage Deviation from VID Setting (V)1, 2, 3, 4
ICC (A)
Maximum Voltage
Typical Voltage
Minimum Voltage
1.30 mΩ
1.38 mΩ
1.45 mΩ
0
5
0.000
-0.007
-0.013
-0.020
-0.026
-0.033
-0.039
-0.046
-0.052
-0.059
-0.065
-0.072
-0.078
-0.085
-0.091
-0.098
-0.101
-0.111
-0.117
-0.124
-0.130
-0.137
-0.143
-0.150
-0.156
-0.163
-0.019
-0.026
-0.033
-0.040
-0.047
-0.053
-0.060
-0.067
-0.074
-0.081
-0.088
-0.095
-0.102
-0.108
-0.115
-0.122
-0.126
-0.136
-0.143
-0.150
-0.157
-0.163
-0.170
-0.177
-0.184
-0.191
-0.038
-0.045
-0.053
-0.060
-0.067
-0.074
-0.082
-0.089
-0.096
-0.103
-0.111
-0.118
-0.125
-0.132
-0.140
-0.147
-0.151
-0.161
-0.169
-0.176
-0.183
-0.190
-0.198
-0.205
-0.212
-0.219
10
15
20
25
30
35
40
45
50
55
60
65
70
75
78
85
90
95
100
105
110
115
120
125
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot allowed
as shown in Section 2.5.3.
2. This table is intended to aid in reading discrete points on Figure 1.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE
lands. Voltage regulation feedback for voltage regulator circuits must be taken from processor
VCC and VSS lands. Refer to the Voltage Regulator-Down (VRD) 11.0 Processor Power Delivery Design
Guidelines For Desktop LGA775 Socket for socket loadline guidelines and VR implementation details.
4. Adherence to this loadline specification is required to ensure reliable processor operation.
Datasheet
19
Electrical Specifications
Figure 1.
VCC Static and Transient Tolerance
Icc [A]
0
10
20
30
40
50
60
70
80
90
100
110
120
VID - 0.000
VID - 0.013
VID - 0.025
VID - 0.038
VID - 0.050
VID - 0.063
VID - 0.075
VID - 0.088
VID - 0.100
VID - 0.113
VID - 0.125
VID - 0.138
VID - 0.150
VID - 0.163
VID - 0.175
VID - 0.188
VID - 0.200
VID - 0.213
VID - 0.225
Vcc Maximum
Vcc Typical
Vcc Minimum
NOTES:
1.
The loadline specification includes both static and transient limits except for overshoot
allowed as shown in Section 2.5.3.
2.
3.
This loadline specification shows the deviation from the VID set point.
The loadlines specify voltage limits at the die measured at the VCC_SENSE and
VSS_SENSE lands. Voltage regulation feedback for voltage regulator circuits must be taken
from processor VCC and VSS lands. Refer to the Voltage Regulator-Down (VRD) 11.0
Processor Power Delivery Design Guidelines For Desktop LGA775 Socket for socket loadline
guidelines and VR implementation details.
20
Datasheet
Electrical Specifications
2.5.3
V
Overshoot
CC
The processor can tolerate short transient overshoot events where VCC exceeds the VID
voltage when transitioning from a high to low current load condition. This overshoot
cannot exceed VID + VOS_MAX (VOS_MAX is the maximum allowable overshoot voltage).
The time duration of the overshoot event must not exceed TOS_MAX (TOS_MAX is the
maximum allowable time duration above VID). These specifications apply to the
processor die voltage as measured across the VCC_SENSE and VSS_SENSE lands.
Table 6.
VCC Overshoot Specifications
Symbol
Parameter
Min
Max
Unit Figure Notes
1
VOS_MAX Magnitude of VCC overshoot above VID
—
50
mV
2
2
Time duration of VCC overshoot above
1
TOS_MAX
VID
—
25
μs
NOTES:
1.
Adherence to these specifications is required to ensure reliable processor operation.
Figure 2.
VCC Overshoot Example Waveform
Example Overshoot Waveform
VOS
VID + 0.050
VID - 0.000
TOS
0
5
10
15
20
25
Time [us]
TOS: Overshoot time above VID
OS: Overshoot above VID
V
NOTES:
1.
2.
V
OS is measured overshoot voltage.
TOS is measured time duration above VID.
2.5.4
Die Voltage Validation
Overshoot events on processor must meet the specifications in Table 6 when measured
across the VCC_SENSE and VSS_SENSE lands. Overshoot events that are < 10 ns in
duration may be ignored. These measurements of processor die level overshoot must
be taken with a bandwidth limited oscilloscope set to a greater than or equal to
100 MHz bandwidth limit.
Datasheet
21
Electrical Specifications
2.6
Signaling Specifications
Most processor Front Side Bus signals use Gunning Transceiver Logic (GTL+) signaling
technology. This technology provides improved noise margins and reduced ringing
through low voltage swings and controlled edge rates. Platforms implement a
termination voltage level for GTL+ signals defined as VTT. Because platforms implement
separate power planes for each processor (and chipset), separate VCC and VTT supplies
are necessary. This configuration allows for improved noise tolerance as processor
frequency increases. Speed enhancements to data and address busses have caused
signal integrity considerations and platform design methods to become even more
critical than with previous processor families.
The GTL+ inputs require a reference voltage (GTLREF) which is used by the receivers to
determine if a signal is a logical 0 or a logical 1. GTLREF must be generated on the
motherboard (see Table 14 for GTLREF specifications). Termination resistors (RTT) for
GTL+ signals are provided on the processor silicon and are terminated to VTT. Intel
chipsets will also provide on-die termination, thus eliminating the need to terminate the
bus on the motherboard for most GTL+ signals.
2.6.1
FSB Signal Groups
The front side bus signals have been combined into groups by buffer type. GTL+ input
signals have differential input buffers, which use GTLREF[3:0] as a reference level. In
this document, the term “GTL+ Input” refers to the GTL+ input group as well as the
GTL+ I/O group when receiving. Similarly, “GTL+ Output” refers to the GTL+ output
group as well as the GTL+ I/O group when driving.
With the implementation of a source synchronous data bus comes the need to specify
two sets of timing parameters. One set is for common clock signals which are
dependent upon the rising edge of BCLK0 (ADS#, HIT#, HITM#, etc.) and the second
set is for the source synchronous signals which are relative to their respective strobe
lines (data and address) as well as the rising edge of BCLK0. Asychronous signals are
still present (A20M#, IGNNE#, etc.) and can become active at any time during the
clock cycle. Table 7 identifies which signals are common clock, source synchronous,
and asynchronous.
Table 7.
FSB Signal Groups (Sheet 1 of 2)
Signal Group
Type
Signals1
GTL+ Common
Clock Input
Synchronous to
BCLK[1:0]
BPRI#, DEFER#, RESET#, RS[2:0]#, TRDY#
GTL+ Common
Clock I/O
Synchronous to
BCLK[1:0]
ADS#, BNR#, BPM[5:0]#, BPMb[3:0]#, BR0#, DBSY#,
DRDY#, HIT#, HITM#, LOCK#
Signals
Associated Strobe
REQ[4:0]#, A[16:3]#3
A[35:17]#3
ADSTB0#
ADSTB1#
GTL+ Source
Synchronous I/O
Synchronous to
assoc. strobe
D[15:0]#, DBI0#
D[31:16]#, DBI1#
D[47:32]#, DBI2#
D[63:48]#, DBI3#
DSTBP0#, DSTBN0#
DSTBP1#, DSTBN1#
DSTBP2#, DSTBN2#
DSTBP3#, DSTBN3#
Synchronous to
BCLK[1:0]
GTL+ Strobes
ADSTB[1:0]#, DSTBP[3:0]#, DSTBN[3:0]#
22
Datasheet
Electrical Specifications
Table 7.
FSB Signal Groups (Sheet 2 of 2)
Signal Group
Type
Signals1
A20M#, IGNNE#, INIT#, LINT0/INTR, LINT1/NMI, SMI#,
STPCLK#, PWRGOOD, TCK, TDI, TMS, TRST#, BSEL[2:],
VID[7:0]
CMOS
Open Drain
Output
FERR#/PBE#, IERR#, THERMTRIP#, TDO
Open Drain
Input/Output
PROCHOT#4
FSB Clock
Clock
BCLK[1:0], ITP_CLK[1:0]2
VCC, VTT, VCCA, VCCIOPLL, VCCPLL, VSS, VSSA,
GTLREF[3:0], COMP[8,3:0], RESERVED,
TESTHI[13,11:10,7:0], VCC_SENSE,
Power/Other
VCC_MB_REGULATION, VSS_SENSE,
VSS_MB_REGULATION, DBR#2, VTT_OUT_LEFT,
VTT_OUT_RIGHT, VTT_SEL, FCx, PECI, MSID[1:0]
NOTES:
1.
2.
Refer to Section 4.2 for signal descriptions.
In processor systems where no debug port is implemented on the system board, these
signals are used to support a debug port interposer. In systems with the debug port
implemented on the system board, these signals are no connects.
The value of these signals during the active-to-inactive edge of RESET# defines the
processor configuration options. See Section 6.1 for details.
3.
4.
PROCHOT# signal type is open drain output and CMOS input.
.
Table 8.
Signal Characteristics
Signals with RTT
Signals with No RTT
A20M#, BCLK[1:0], BSEL[2:0],
COMP[8,3:0], IGNNE#, INIT#, ITP_CLK[1:0],
LINT0/INTR, LINT1/NMI, PWRGOOD,
RESET#, SMI#, STPCLK#,
TESTHI[13,11:10,7:0], VID[7:0],
GTLREF[3:0], TCK, TDI, TMS, TRST#,
MSID[1:0], VTT_SEL
A[35:3]#, ADS#, ADSTB[1:0]#, BNR#, BPRI#,
D[63:0]#, DBI[3:0]#, DBSY#, DEFER#,
DRDY#, DSTBN[3:0]#, DSTBP[3:0]#, HIT#,
HITM#, LOCK#, PROCHOT#, REQ[4:0]#,
RS[2:0]#, TRDY#
Open Drain Signals1
THERMTRIP#, FERR#/PBE#, IERR#, BPM[5:0]#,
BPMb[3:0]#, BR0#, TDO, FCx
NOTES:
1. Signals that do not have RTT, nor are actively driven to their high-voltage level.
.
Table 9.
Signal Reference Voltages
GTLREF
VTT/2
BPM[5:0]#, BPMb[3:0]#, RESET#, BNR#, HIT#,
HITM#, BR0#, A[35:0]#, ADS#, ADSTB[1:0]#,
BPRI#, D[63:0]#, DBI[3:0]#, DBSY#, DEFER#,
DRDY#, DSTBN[3:0]#, DSTBP[3:0]#, LOCK#,
REQ[4:0]#, RS[2:0]#, TRDY#
A20M#, LINT0/INTR, LINT1/NMI,
IGNNE#, INIT#, PROCHOT#,
PWRGOOD1, SMI#, STPCLK#, TCK1,
TDI1, TMS1, TRST#1
NOTES:
1. These signals also have hysteresis added to the reference voltage. See Table 11 for more
information.
Datasheet
23
Electrical Specifications
2.6.2
CMOS and Open Drain Signals
Legacy input signals such as A20M#, IGNNE#, INIT#, SMI#, and STPCLK# use CMOS
input buffers. All of the CMOS and Open Drain signals are required to be asserted/
deasserted for at least four BCLKs for the processor to recognize the proper signal
state. See Section 2.6.3 for the DC specifications. See Section 6.2 for additional timing
requirements for entering and leaving the low power states.
2.6.3
Processor DC Specifications
The processor DC specifications in this section are defined at the processor core (pads)
unless otherwise stated. All specifications apply to all frequencies and cache sizes
unless otherwise stated.
Table 10.
GTL+ Signal Group DC Specifications
Symbol
Parameter
Min
Max
Unit Notes1
2,
3
VIL
VIH
VOH
Input Low Voltage
Input High Voltage
Output High Voltage
-0.10
GTLREF – 0.10
VTT + 0.10
VTT
V
V
V
3, 4, 5
3, 5
GTLREF + 0.10
VTT – 0.10
VTT_MAX
/
IOL
ILI
Output Low Current
N/A
N/A
N/A
10
A
µA
µA
Ω
-
[(RTT_MIN)+(2*RON_MIN)]
6
Input Leakage Current
± 200
Output Leakage
Current
7
ILO
± 200
13
RON
Buffer On Resistance
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. VIL is defined as the voltage range at a receiving agent that will be interpreted as a logical low
value.
3. The VTT referred to in these specifications is the instantaneous VTT.
4. VIH is defined as the voltage range at a receiving agent that will be interpreted as a logical high
value.
5. VIH and VOH may experience excursions above VTT.
6. Leakage to VSS with land held at VTT.
7. Leakage to VTT with land held at 300 mV.
Table 11.
Open Drain and TAP Output Signal Group DC Specifications
Symbol
Parameter
Output Low Voltage
Min
Max
Unit Notes1
VOL
VOH
0
VTT – 0.05
16
0.20
VTT + 0.05
50
V
V
-
2
Output High Voltage
Output Low Current
Output Leakage Current
3
4
IOL
mA
µA
ILO
N/A
± 200
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. V
is determined by the value of the external pull-up resister to V .
OH
TT
3. Measured at VTT * 0.2.
4. For Vin between 0 and VOH
.
24
Datasheet
Electrical Specifications
Table 12.
CMOS Signal Group DC Specifications
Symbol
Parameter
Input Low Voltage
Min
Max
Unit Notes1
2,
3
VIL
VIH
-0.10
VTT * 0.70
-0.10
VTT * 0.30
VTT + 0.10
VTT * 0.10
VTT + 0.10
4.70
V
V
3, 4, 5
3
Input High Voltage
VOL
Output Low Voltage
Output High Voltage
Output Low Current
Output High Current
Input Leakage Current
Output Leakage Current
V
3, 5,6
3, 7
3, 7
8
VOH
IOL
0.90 * VTT
1.70
V
mA
mA
µA
µA
IOH
1.70
4.70
ILI
N/A
± 100
9
ILO
N/A
± 100
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. VIL is defined as the voltage range at a receiving agent that will be interpreted as a logical low
value.
3. The VTT referred to in these specifications refers to instantaneous VTT.
4. VIH is defined as the voltage range at a receiving agent that will be interpreted as a logical high
value.
5. VIH and VOH may experience excursions above VTT.
6. All outputs are open drain.
7. IOL is measured at 0.10 * VTT. IOH is measured at 0.90 * VTT.
8. Leakage to VSS with land held at VTT.
9. Leakage to VTT with land held at 300 mV
Table 13.
PECI DC Electrical Limits
Symbol
Definition and Conditions
Input Voltage Range
Min
Max
Units Notes
Vin
-0.30
VTT
—
V
Vhysteresis Hysteresis
0.1 * VTT
V
V
V
3
Vn
Vp
Negative-edge threshold voltage
0.275 * VTT
0.550 * VTT
0.500 * VTT
0.725 * VTT
Positive-edge threshold voltage
High level output source
(VOH = 0.75 * VTT)
Isource
-6.0
0.5
N/A
1.0
mA
mA
Low level output sink
(VOL = 0.25 * VTT)
Isink
Ileak+
Ileak-
High impedance state leakage to VTT
High impedance leakage to GND
Bus capacitance
N/A
N/A
50
10
10
—
µA
µA
2
2
Cbus
—
pF
Vnoise
Signal noise immunity above 300 MHz
0.1 * VTT
Vp-p
NOTE:
1.
VTT supplies the PECI interface. PECI behavior does not affect VTT min/max specifications.
Refer to Table 4 for VTT specifications.
2.
3.
The leakage specification applies to powered devices on the PECI bus.
The input buffers use a Schmitt-triggered input design for improved noise immunity.
Datasheet
25
Electrical Specifications
2.6.3.1
GTL+ Front Side Bus Specifications
In most cases, termination resistors are not required as these are integrated into the
processor silicon. See Table 8 for details on which GTL+ signals do not include on-die
termination.
Valid high and low levels are determined by the input buffers by comparing with a
reference voltage called GTLREF. Table 14 lists the GTLREF specifications. The GTL+
reference voltage (GTLREF) should be generated on the system board using high
precision voltage divider circuits.
Table 14.
GTL+ Bus Voltage Definitions
Symbol
Parameter
Min
Typ
Max
Units Notes1
2
GTLREF_PU
GTLREF_PD
RTT
GTLREF pull-up resistor
124 * 0.99
124
210
124 * 1.01
210 * 1.01
55
Ω
2
GTLREF pull-down resistor 210 * 0.99
Ω
3
Termination Resistance
COMP Resistance
45
50
Ω
4
COMP[3:0]
COMP8
49.40
24.65
49.90
24.90
50.40
Ω
4
COMP Resistance
25.15
Ω
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. GTLREF is to be generated from VTT by a voltage divider of 1% resistors (one divider for each
GTLEREF land). Refer to the applicable platform design guide for implementation details.
3. RTT is the on-die termination resistance measured at VTT/3 of the GTL+ output driver.
4. COMP resistance must be provided on the system board with 1% resistors. COMP[3:0] and
COMP8 resistors are to VSS
.
2.7
Clock Specifications
2.7.1
Front Side Bus Clock (BCLK[1:0]) and Processor Clocking
BCLK[1:0] directly controls the FSB interface speed as well as the core frequency of the
processor. As in previous generation processors, the processor’s core frequency is a
multiple of the BCLK[1:0] frequency. The processor bus ratio multiplier will be set at its
default ratio during manufacturing.
The processor uses a differential clocking implementation. For more information on the
processor clocking, contact your Intel field representative.
Table 15.
Core Frequency to FSB Multiplier Configuration
Multiplication of System
Core Frequency to FSB
Frequency
Core Frequency
(266 MHz BCLK/
1066 MHz FSB)
Core Frequency
(333 MHz BCLK/
1333 MHz FSB)
2
Notes1,
1/6
1.60 GHz
1.87 GHz
2.13 GHz
2.40 GHz
2.66 GHz
2.93 GHz
3.20 GHz
2.00 GHz
2.33 GHz
2.66 GHz
3.00 GHz
3.33 GHz
3.66 GHz
4.00 GHz
-
-
-
-
-
-
-
1/7
1/8
1/9
1/10
1/11
1/12
NOTES:
1. Individual processors operate only at or below the rated frequency.
2. Listed frequencies are not necessarily committed production frequencies.
26
Datasheet
Electrical Specifications
2.7.2
FSB Frequency Select Signals (BSEL[2:0])
The BSEL[2:0] signals are used to select the frequency of the processor input clock
(BCLK[1:0]). Table 16 defines the possible combinations of the signals and the
frequency associated with each combination. The required frequency is determined by
the processor, chipset, and clock synthesizer. All agents must operate at the same
frequency.
The Intel® Core™2 Extreme Quad-Core processor QX6800, QX6700 and Intel® Core™2
Quad processors Q6600 and Q6700 operate at a 1066 MHz FSB frequency (selected by
a 266 MHz BCLK[1:0] frequency). The Intel® Core™2 Extreme Quad-Core processor
QX6850 operates at 1333 MHz FSB frequency (selected by a 333 MHz BCLK[1:0]
frequency). Individual processors will only operate at their specified FSB frequency.
Table 16.
BSEL[2:0] Frequency Table for BCLK[1:0]
BSEL2
BSEL1
BSEL0
FSB Frequency
L
L
L
L
L
H
H
L
266 MHz
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
333 MHz
L
H
H
H
H
L
L
H
H
H
H
L
H
H
L
L
2.7.3
Phase Lock Loop (PLL) and Filter
An on-die PLL filter solution will be implemented on the processor. The VCCPLL input is
used for the PLL. Refer to Table 4 for DC specifications.
Datasheet
27
Electrical Specifications
2.7.4
BCLK[1:0] Specifications
Table 17.
Front Side Bus Differential BCLK Specifications
Symbol
Parameter
Min
Typ
Max
Unit Figure Notes1
2
VL
Input Low Voltage
Input High Voltage
-0.30
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.15
0.550
0.140
1.4
V
V
V
V
V
V
V
3
3
2
VH
3, 4,
5
VCROSS(abs) Absolute Crossing Point
0.300
N/A
3, 4
3, 4
3
ΔVCROSS
VOS
Range of Crossing Points
Overshoot
-
6
N/A
6
7
VUS
Undershoot
-0.300
0.300
N/A
3
VSWING
Differential Output Swing
N/A
5
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
2. "Steady state" voltage, not including overshoot or undershoot.
3. Crossing voltage is defined as the instantaneous voltage value when the rising edge of BCLK0
equals the falling edge of BCLK1.
4. The crossing point must meet the absolute and relative crossing point specifications
simultaneously
5. VHavg is the statistical average of the VH measured by the oscilloscope.
6. Overshoot is defined as the absolute value of the maximum voltage. Undershoot is defined as
the absolute value of the minimum voltage.
7. Measurement taken from differential waveform.
.
Table 18.
FSB Differential Clock Specifications (1066 MHz FSB)
T# Parameter
BCLK[1:0] Frequency
Min
Nom
Max
Unit
Figure
Notes1
2
265.307
3.74963
—
—
—
—
266.746
3.76922
150
MHz
ns
3
4
T1: BCLK[1:0] Period
3
3
T2: BCLK[1:0] Period Stability
ps
T5: BCLK[1:0] Rise and Fall Slew
Rate
5
6
2.5
—
8
V/nS
%
5
T6: Slew Rate Matching
N/A
N/A
20
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor core frequencies
based on a 266 MHz BCLK[1:0].
2. Duty Cycle (High time/Period) must be between 40 and 60%.
3. The period specified here is the average period. A given period may vary from this specification
as governed by the period stability specification (T2). Min period specification is based on
-300 PPM deviation from a 3.75 ns period. Max period specification is based on the summation
of +300 PPM deviation from a 3.75 ns period and a +0.5% maximum variance due to spread
spectrum clocking.
4. In this context, period stability is defined as the worst case timing difference between successive
crossover voltages. In other words, the largest absolute difference between adjacent clock
periods must be less than the period stability.
5. Measurement taken from differential waveform.
6. Matching applies to rising edge rate for Clock and falling edge rate for Clock#. It is measured
using a ±75 mV window centered on the average cross point where Clock rising meets Clock#
falling. The median cross point is used to calculate the voltage thresholds the oscilloscope is to
use for the edge rate calculations.
28
Datasheet
Electrical Specifications
Table 19.
FSB Differential Clock Specifications (1333 MHz FSB)
T# Parameter
BCLK[1:0] Frequency
Min
Nom
Max
Unit
Figure
Notes1
2
331.635
2.99972
—
—
—
333.364
3.01536
150
MHz
ns
-
3
T1: BCLK[1:0] Period
3
3
5
4,
5
T2: BCLK[1:0] Period Stability
T5: BCLK[1:0] Rise and Fall Slew Rate
T6: Slew Rate Matching
NOTES:
—
ps
6
2.5
—
8
V/nS
%
7
N/A
N/A
20
1. Unless otherwise noted, all specifications in this table apply to all processor core frequencies
based on a 333 MHz BCLK[1:0].
2. Duty Cycle (High time/Period) must be between 40 and 60%.
3. The period specified here is the average period. A given period may vary from this specification
as governed by the period stability specification (T2). Min period specification is based on -300
PPM deviation from a 3 ns period. Max period specification is based on the summation of +300
PPM deviation from a 3 ns period and a +0.5% maximum variance due to spread spectrum
clocking.
4. For the clock jitter specification, refer to the CK505 Clock Synthesizer/Driver Specification.
5. In this context, period stability is defined as the worst case timing difference between successive
crossover voltages. In other words, the largest absolute difference between adjacent clock
periods must be less than the period stability.
6. Measurement taken from differential waveform.
7. Matching applies to rising edge rate for Clock and falling edge rate for Clock#. It is measured
using a ±75 mV window centered on the average cross point where Clock rising meets Clock#
falling. The median cross point is used to calculate the voltage thresholds the oscilloscope is to
use for the edge rate calculations. Slew rate matching is a single ended measurement.
Figure 3.
Differential Clock Waveform
CLK 0
VCROSS Max
500 mV
VCROSS
Median + 75 mV
VCROSS
VCROSS
median
median
VCROSS
VCROSS Min
300 mV
Median - 75 mV
CLK 1
High Time
Low Time
Period
Datasheet
29
Electrical Specifications
Figure 4.
Differential Clock Crosspoint Specification
650
600
550
500
550 mV
550 + 0.5 (VHavg - 700)
450
400
300 + 0.5 (VHavg - 700)
350
300
250
200
300 mV
660 670 680 690 700 710 720 730 740 750 760 770 780 790 800 810 820 830 840 850
VHavg (mV)
Figure 5.
Differential Measurements
Slew_rise
Slew _fall
+150 mV
0.0 V
+150 mV
0.0V
V_swing
-150 mV
-150 mV
D iff
§ §
30
Datasheet
Package Mechanical Specifications
3
Package Mechanical
Specifications
The processor is packaged in a Flip-Chip Land Grid Array (FC-LGA6) package that
interfaces with the motherboard via an LGA775 socket. The package consists of a
processor core mounted on a substrate land-carrier. An integrated heat spreader (IHS)
is attached to the package substrate and core and serves as the mating surface for
processor component thermal solutions, such as a heatsink. Figure 6 shows a sketch of
the processor package components and how they are assembled together. Refer to the
LGA775 Socket Mechanical Design Guide for complete details on the LGA775 socket.
The package components shown in Figure 6 include the following:
• Integrated Heat Spreader (IHS)
• Thermal Interface Material (TIM)
• Processor core (die)
• Package substrate
• Capacitors
Figure 6.
Processor Package Assembly Sketch
Core (die)
TIM
IHS
Substrate
Capacitors
LGA775 Socket
System Board
NOTE:
1.
Socket and motherboard are included for reference and are not part of processor package.
3.1
Package Mechanical Drawing
The package mechanical drawings are shown in Figure 7 and Figure 8. The drawings
include dimensions necessary to design a thermal solution for the processor. These
dimensions include:
• Package reference with tolerances (total height, length, width, etc.)
• IHS parallelism and tilt
• Land dimensions
• Top-side and back-side component keep-out dimensions
• Reference datums
• All drawing dimensions are in mm [in].
• Guidelines on potential IHS flatness variation with socket load plate actuation and
installation of the cooling solution is available in the processor Thermal and
Mechanical Design Guidelines.
Datasheet
31
Package Mechanical Specifications
Figure 7.
Processor Package Drawing Sheet 1 of 3
32
Datasheet
Package Mechanical Specifications
Figure 8.
Processor Package Drawing Sheet 2 of 3
Datasheet
33
Package Mechanical Specifications
Figure 9.
Processor Package Drawing Sheet 3 of 3
34
Datasheet
Package Mechanical Specifications
3.2
3.3
Processor Component Keep-Out Zones
The processor may contain components on the substrate that define component keep-
out zone requirements. A thermal and mechanical solution design must not intrude into
the required keep-out zones. Decoupling capacitors are typically mounted to either the
topside or land-side of the package substrate. See Figure 7 and Figure 8 for keep-out
zones. The location and quantity of package capacitors may change due to
manufacturing efficiencies but will remain within the component keep-in.
Package Loading Specifications
Table 20 provides dynamic and static load specifications for the processor package.
These mechanical maximum load limits should not be exceeded during heatsink
assembly, shipping conditions, or standard use condition. Also, any mechanical system
or component testing should not exceed the maximum limits. The processor package
substrate should not be used as a mechanical reference or load-bearing surface for
thermal and mechanical solution. The minimum loading specification must be
maintained by any thermal and mechanical solutions.
.
Table 20.
Processor Loading Specifications
Parameter
Minimum
Maximum
Notes
1, 2,
3
Static
80 N [17 lbf]
—
311 N [70 lbf]
756 N [170 lbf]
1, 3, 4
Dynamic
NOTES:
1. These specifications apply to uniform compressive loading in a direction normal to the
processor IHS.
2. This is the maximum force that can be applied by a heatsink retention clip. The clip must also
provide the minimum specified load on the processor package.
3. These specifications are based on limited testing for design characterization. Loading limits are
for the package only and do not include the limits of the processor socket.
4. Dynamic loading is defined as an 11 ms duration average load superimposed on the static load
requirement.
3.4
Package Handling Guidelines
Table 21 includes a list of guidelines on package handling in terms of recommended
maximum loading on the processor IHS relative to a fixed substrate. These package
handling loads may be experienced during heatsink removal.
Table 21.
Package Handling Guidelines
Parameter
Maximum Recommended
Notes
1,
2
Shear
Tensile
Torque
311 N [70 lbf]
111 N [25 lbf]
2, 3
2, 4
3.95 N-m [35 lbf-in]
NOTES:
1. A shear load is defined as a load applied to the IHS in a direction parallel to the IHS top surface.
2. These guidelines are based on limited testing for design characterization.
3. A tensile load is defined as a pulling load applied to the IHS in a direction normal to the IHS
surface.
4. A torque load is defined as a twisting load applied to the IHS in an axis of rotation normal to the
IHS top surface.
Datasheet
35
Package Mechanical Specifications
3.5
3.6
Package Insertion Specifications
The processor can be inserted into and removed from a LGA775 socket 15 times. The
socket should meet the LGA775 requirements detailed in the LGA775 Socket
Mechanical Design Guide.
Processor Mass Specification
The typical mass of the processor is 21.5 g [0.76 oz]. This mass [weight] includes all
the components that are included in the package.
3.7
Processor Materials
Table 22 lists some of the package components and associated materials.
Table 22.
Processor Materials
Component
Material
Integrated Heat Spreader
(IHS)
Nickel Plated Copper
Substrate
Fiber Reinforced Resin
Gold Plated Copper
Substrate Lands
3.8
Processor Markings
Figure 10 shows the topside markings on the processor. This diagram is to aid in the
identification of the processor.
Figure 10.
Processor Top-Side Markings Example for 1066 MHz Processors
M
INTEL ©'05 QX6700
INTEL® CORE™2 EXTREME
SLxxx [COO]
2.66GHZ/8M/1066/05B
e4
[FPO]
ATPO
S/N
36
Datasheet
Package Mechanical Specifications
Figure 11.
Processor Top-Side Markings Example for 1333 MHz Processors
M
INTEL ©'05 QX6850
INTEL® CORE™2 EXTREME
SLxxx [COO]
3.00GHZ/8M/1333/05B
e4
[FPO]
ATPO
S/N
Datasheet
37
Package Mechanical Specifications
3.9
Processor Land Coordinates
Figure 12 shows the top view of the processor land coordinates. The coordinates are
referred to throughout the document to identify processor lands.
.
Figure 12.
Processor Land Coordinates and Quadrants (Top View)
VCC / VSS
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1
AN
AM
AL
AK
AJ
AH
AG
AF
AE
AD
AC
AB
AA
Y
AN
AM
AL
AK
AJ
AH
AG
AF
AE
AD
AC
AB
AA
Y
Socket 775
Quadrants
Top View
W
V
W
Address/
UV Common Clock/
U
T
T
Async
R
R
P
N
M
L
P
N
M
L
K
K
J
J
H
H
G
F
G
F
E
E
D
C
B
A
D
C
B
A
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1
VTT / Clocks
Data
§ §
38
Datasheet
Land Listing and Signal Descriptions
4
Land Listing and Signal
Descriptions
This chapter provides the processor land assignment and signal descriptions.
4.1
Processor Land Assignments
This section contains the land listings for the processor. The land-out footprint is shown
in Figure 13 and Figure 14. These figures represent the land-out arranged by land
number and they show the physical location of each signal on the package land array
(top view). Table 23 is a listing of all processor lands ordered alphabetically by land
(signal) name. Table 24 is also a listing of all processor lands; the ordering is by land
number.
Datasheet
39
Land Listing and Signal Descriptions
Figure 13.
land-out Diagram (Top View – Left Side)
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
AN
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
AM
AL
AK
AJ
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VCC
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
AH
AG
AF
AE
AD
AC
AB
AA
Y
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
W
V
VCC
VSS
VCC
VCC
VCC
VSS
VCC
VCC
VCC
VSS
VCC
VCC
VCC
VSS
VCC
VCC
VCC
VSS
VCC
VCC
VCC
VSS
VCC
VCC
VCC
VSS
VCC
VCC
VCC
VSS
VCC
VCC
U
T
R
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
P
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
N
M
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
L
K
J
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VCC
VCC
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
FC34
VSS
FC31
FC33
VCC
H
BSEL1
FC15
FC32
G
F
BSEL2 BSEL0 BCLK1 TESTHI4 TESTHI5 TESTHI3 TESTHI6 RESET# D47#
D44# DSTBN2# DSTBP2# D35#
D36#
D37#
VSS
D32#
VSS
D31#
D30#
D33#
VSS
RSVD
FC26
VTT
BCLK0 VTT_SEL TESTHI0 TESTHI2 TESTHI7 RSVD
VSS
D43#
D42#
VSS
D41#
VSS
VSS
D40#
DBI2#
D38#
D39#
VSS
E
D
VSS
VTT
VSS
VTT
VSS
VTT
VSS
VTT
FC10
VSS
RSVD
D45#
D34#
RSVD
VTT
VTT
VCCPLL D46#
D48#
D49#
VCCIO
VSS
C
VTT
VTT
VTT
VTT
VTT
VSS
D58#
DBI3#
VSS
D54# DSTBP3#
VSS
D51#
D53#
PLL
B
A
VTT
VTT
30
VTT
VTT
29
VTT
VTT
28
VTT
VTT
27
VTT
VTT
26
VTT
VTT
25
VSS
FC23
24
VSSA
VCCA
23
D63#
D62#
22
D59#
VSS
21
VSS
RSVD
20
D60#
D61#
19
D57#
VSS
18
VSS
D56#
17
D55#
DSTBN3# VSS
16 15
40
Datasheet
Land Listing and Signal Descriptions
Figure 14.
land-out Diagram (Top View – Right Side)
14
13
12
11
10
9
8
7
6
5
4
3
2
1
VID_SEL
ECT
VSS_MB_
REGULATION REGULATION SENSE
VCC_MB_
VSS_
VCC_
SENSE
VCC
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VID0
VSS
AN
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VID7
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
FC40
VID3
FC8
VID6
VID1
VSS
VID5
VID4
VSS
VID2
VSS
FC25
FC24
BPM1#
VSS
AM
AL
AK
AJ
VRDSEL PROCHOT#
VCC
VSS
ITP_CLK0
ITP_CLK1
VSS
VSS
VCC
A35#
VSS
A34#
A33#
A31#
A27#
VSS
BPM0#
RSVD
BPM3#
BPM4#
VSS
VCC
A32#
A30#
A28#
RSVD
VSS
AH
AG
AF
AE
AD
AC
AB
VCC
A29#
VSS
BPM5#
VSS
TRST#
TDO
VCC
SKTOCC#
VCC
RSVD
A22#
VSS
FC18
TCK
ADSTB1#
A25#
A24#
FC36
BPM2#
DBR#
IERR#
TDI
VCC
RSVD
A26#
VSS
TMS
VCC
A17#
FC37
VSS
VTT_OUT_
RIGHT
VCC
VSS
VSS
A23#
A21#
VSS
FC39
AA
VCC
VCC
VCC
VCC
VCC
VSS
VSS
VSS
VSS
VSS
A19#
A18#
VSS
A10#
VSS
VSS
A16#
A14#
A12#
A9#
A20#
VSS
FC17
TESTHI1
VSS
VSS
TDI_M
RSVD
FC29
FC4
FC0
Y
W
V
MSID0
MSID1
TDO_M
COMP1
A15#
A13#
A11#
FC30
U
T
VSS
FERR#/
PBE#
VCC
VSS
ADSTB0#
VSS
A8#
VSS
COMP3
R
VCC
VCC
VSS
VSS
A4#
RSVD
RSVD
VSS
INIT#
VSS
SMI#
TESTHI11
P
VSS
RSVD
IGNNE# PWRGOOD
N
THERMTRI
VSS
VCC
VSS
REQ2#
A5#
A7#
STPCLK#
M
P#
VCC
VCC
VSS
VSS
VSS
A3#
A6#
VSS
TESTHI13
VSS
LINT1
LINT0
L
REQ3#
VSS
REQ0#
A20M#
K
VTT_OUT_
LEFT
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VCC
VSS
VSS
VSS
REQ4#
VSS
REQ1#
TESTHI10
PECI
VSS
FC22
VSS
FC3
J
H
FC35
GTLREF1
COMP2
GTLREF0
BPMb0#
GTLRE
F2
D29#
D27#
DSTBN1# DBI1#
D16#
BPRI#
DEFER#
RSVD
BPMb2# BPMb3#
G
D28#
VSS
VSS
D26#
D25#
D24#
DSTBP1#
VSS
D23#
VSS
VSS
D21#
D22#
D18#
D19#
VSS
D17#
VSS
VSS
RSVD
D20#
FC21
RSVD
VSS
RS1#
FC20
VSS
VSS
HITM#
HIT#
BR0#
TRDY#
VSS
GTLREF3
VSS
F
E
D
C
RSVD
D15#
D12#
ADS#
RSVD
DRDY#
VSS
D52#
VSS
D14#
D11#
VSS
BPMb1# DSTBN0#
VSS
D3#
D1#
VSS
LOCK#
BNR#
VSS
D50#
14
COMP8
COMP0
13
D13#
VSS
12
VSS
D9#
11
D10# DSTBP0#
VSS
DBI0#
8
D6#
D7#
7
D5#
VSS
6
VSS
D4#
5
D0#
D2#
4
RS0#
RS2#
3
DBSY#
VSS
2
B
A
D8#
VSS
10
9
1
Datasheet
41
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
#
Signal
Buffer Type
Direction
Direction
#
Buffer Type
A3#
A4#
L5
P6
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
BNR#
BPM0#
BPM1#
BPM2#
BPM3#
BPM4#
BPM5#
BPMb0#
BPMb1#
BPMb2#
BPMb3#
BPRI#
BR0#
BSEL0
BSEL1
BSEL2
COMP0
COMP1
COMP2
COMP3
COMP8
D0#
C2
Common Clock Input/Output
AJ2 Common Clock Input/Output
AJ1 Common Clock Input/Output
AD2 Common Clock Input/Output
AG2 Common Clock Input/Output
AF2 Common Clock Input/Output
AG3 Common Clock Input/Output
A5#
M5
A6#
L4
A7#
M4
A8#
R4
A9#
T5
A10#
A11#
A12#
A13#
A14#
A15#
A16#
A17#
A18#
A19#
A20#
A21#
A22#
A23#
A24#
A25#
A26#
A27#
A28#
A29#
A30#
A31#
A32#
A33#
A34#
A35#
A20M#
ADS#
ADSTB0#
ADSTB1#
BCLK0
BCLK1
U6
G1
C9
Common Clock Input/Output
Common Clock Input/Output
Common Clock Input/Output
Common Clock Input/Output
T4
U5
G4
U4
G3
V5
G8
Common Clock
Input
V4
F3
Common Clock Input/Output
W5
AB6
W6
Y6
G29
H30
G30
A13
T1
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Output
Output
Output
Input
Y4
Input
AA4
AD6
AA5
AB5
AC5
AB4
AF5
AF4
AG6
AG4
AG5
AH4
AH5
AJ5
AJ6
K3
G2
Input
R1
Input
B13
B4
Input
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
D1#
C5
D2#
A4
D3#
C6
D4#
A5
D5#
B6
D6#
B7
D7#
A7
D8#
A10
A11
B10
C11
D8
D9#
D10#
D11#
D12#
D13#
D14#
D15#
D16#
D17#
Asynch CMOS
Input
D2
Common Clock Input/Output
Source Synch Input/Output
Source Synch Input/Output
B12
C12
D11
G9
R6
AD5
F28
G28
Clock
Clock
Input
Input
F8
42
Datasheet
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
Signal
Direction
Direction
#
Buffer Type
#
Buffer Type
D18#
D19#
D20#
D21#
D22#
D23#
D24#
D25#
D26#
D27#
D28#
D29#
D30#
D31#
D32#
D33#
D34#
D35#
D36#
D37#
D38#
D39#
D40#
D41#
D42#
D43#
D44#
D45#
D46#
D47#
D48#
D49#
D50#
D51#
D52#
D53#
D54#
D55#
D56#
F9
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
D57#
D58#
B18
C21
B21
B19
A19
A22
B22
A8
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
E9
D7
D59#
E10
D10
F11
F12
D13
E13
G13
F14
G14
F15
G15
G16
E15
E16
G18
G17
F17
F18
E18
E19
F20
E21
F21
G21
E22
D22
G22
D20
D17
A14
C15
C14
B15
C18
B16
A17
D60#
D61#
D62#
D63#
DBI0#
DBI1#
DBI2#
DBI3#
DBR#
G11
D19
C20
AC2
B2
Power/Other
Common Clock Input/Output
Common Clock Input
Output
DBSY#
DEFER#
DRDY#
DSTBN0#
DSTBN1#
DSTBN2#
DSTBN3#
DSTBP0#
DSTBP1#
DSTBP2#
DSTBP3#
FC0
G7
C1
Common Clock Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Power/Other
C8
G12
G20
A16
B9
E12
G19
C17
Y1
FC3
J2
Power/Other
FC10
E24
H29
Y3
Power/Other
FC15
Power/Other
FC17
Power/Other
FC18
AE3
E5
Power/Other
FC20
Power/Other
FC21
F6
Power/Other
FC22
J3
Power/Other
FC23
A24
AK1
AL1
E29
U2
Power/Other
FC24
Power/Other
FC25
Power/Other
FC26
Power/Other
FC29
Power/Other
FC30
U3
Power/Other
FC31
J16
Power/Other
Datasheet
43
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
#
Signal
Buffer Type
Direction
Direction
#
Buffer Type
FC32
FC33
H15
H16
J17
H4
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Asynch CMOS
Power/Other
Power/Other
Power/Other
Power/Other
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESERVED
RESET#
RS0#
AH2
D1
FC34
D14
D16
E23
E6
FC35
FC36
AD3
AB3
AA2
T2
FC37
FC39
E7
FC4
F23
F29
G6
FC40
AM6
AK6
R3
FC8
FERR#/PBE#
GTLREF0
GTLREF1
GTLREF2
GTLREF3
HIT#
Output
Input
Input
Input
Input
N4
H1
N5
H2
P5
G10
F2
V2
G23 Common Clock
Input
Input
Input
Input
Output
Input
Input
Input
Input
Input
Output
Output
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Output
Input
D4
Common Clock Input/Output
Common Clock Input/Output
B3
F5
Common Clock
Common Clock
Common Clock
Power/Other
Asynch CMOS
Asynch CMOS
TAP
HITM#
IERR#
E4
RS1#
AB2
N2
Asynch CMOS
Asynch CMOS
Asynch CMOS
TAP
Output
Input
Input
Input
Input
Input
Input
RS2#
A3
IGNNE#
INIT#
SKTOCC#
SMI#
AE8
P2
P3
ITP_CLK0
ITP_CLK1
LINT0
AK3
AJ3
K1
STPCLK#
TCK
M3
TAP
AE1
AD1
W2
AF1
U1
Asynch CMOS
Asynch CMOS
TDI
TAP
LINT1
L1
TDI_M
Power/Other
TAP
LOCK#
MSID0
C3
Common Clock Input/Output
TDO
W1
V1
Power/Other
Power/Other
Output
Output
TDO_M
TAP
MSID1
TESTHI0
TESTHI1
TESTHI10
TESTHI11
TESTHI13
TESTHI2
TESTHI3
TESTHI4
TESTHI5
TESTHI6
TESTHI7
THERMTRIP#
TMS
F26
W3
H5
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Asynch CMOS
TAP
PECI
G5
Power/Other Input/Output
Asynch CMOS Input/Output
PROCHOT#
PWRGOOD
REQ0#
REQ1#
REQ2#
REQ3#
REQ4#
RESERVED
RESERVED
RESERVED
RESERVED
AL2
N1
Power/Other
Input
P1
K4
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
L2
J5
F25
G25
G27
G26
G24
F24
M2
M6
K6
J6
A20
AC4
AE4
AE6
AC1
44
Datasheet
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
Signal
Direction
Direction
#
Buffer Type
#
Buffer Type
TRDY#
TRST#
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
E3
Common Clock
TAP
Input
Input
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
AF22
AF8
Power/Other
Power/Other
Power/Other
AG1
AA8
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AF9
AB8
AG11 Power/Other
AG12 Power/Other
AG14 Power/Other
AG15 Power/Other
AG18 Power/Other
AG19 Power/Other
AG21 Power/Other
AG22 Power/Other
AG25 Power/Other
AG26 Power/Other
AG27 Power/Other
AG28 Power/Other
AG29 Power/Other
AG30 Power/Other
AC23
AC24
AC25
AC26
AC27
AC28
AC29
AC30
AC8
AD23 Power/Other
AD24 Power/Other
AD25 Power/Other
AD26 Power/Other
AD27 Power/Other
AD28 Power/Other
AD29 Power/Other
AD30 Power/Other
AG8
AG9
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AH11
AH12
AH14
AH15
AH18
AH19
AH21
AH22
AH25
AH26
AH27
AH28
AH29
AH30
AH8
AD8
AE11
AE12
AE14
AE15
AE18
AE19
AE21
AE22
AE23
AE9
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AF11
AF12
AF14
AF15
AF18
AF19
AF21
AH9
AJ11
AJ12
AJ14
AJ15
Datasheet
45
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
#
Signal
Buffer Type
Direction
Direction
#
Buffer Type
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
AJ18
AJ19
AJ21
AJ22
AJ25
AJ26
AJ8
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
AM19 Power/Other
AM21 Power/Other
AM22 Power/Other
AM25 Power/Other
AM26 Power/Other
AM29 Power/Other
AM30 Power/Other
AJ9
AM8
AM9
AN11
AN12
AN14
AN15
AN18
AN19
AN21
AN22
AN25
AN26
AN29
AN30
AN8
AN9
J10
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AK11
AK12
AK14
AK15
AK18
AK19
AK21
AK22
AK25
AK26
AK8
AK9
AL11
AL12
AL14
AL15
AL18
AL19
AL21
AL22
AL25
AL26
AL29
AL30
AL8
J11
J12
J13
J14
J15
J18
J19
J20
J21
AL9
J22
AM11 Power/Other
AM12 Power/Other
AM14 Power/Other
AM15 Power/Other
AM18 Power/Other
J23
J24
J25
J26
J27
46
Datasheet
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
Signal
Direction
Direction
#
Buffer Type
#
Buffer Type
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
J28
J29
J30
J8
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
T27
T28
T29
T30
T8
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
J9
K23
K24
K25
K26
K27
K28
K29
K30
K8
U23
U24
U25
U26
U27
U28
U29
U30
U8
L8
V8
M23
M24
M25
M26
M27
M28
M29
M30
M8
W23
W24
W25
W26
W27
W28
W29
W30
W8
N23
N24
N25
N26
N27
N28
N29
N30
N8
Y23
Y24
Y25
Y26
Y27
Y28
Y29
Y30
Y8
P8
VCC_MB_
REGULATION
AN5
Power/Other
Output
Output
R8
VCC_SENSE
VCCA
AN3
A23
C23
D23
Power/Other
Power/Other
Power/Other
Power/Other
T23
T24
T25
T26
VCCIOPLL
VCCPLL
Datasheet
47
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
#
Signal
Buffer Type
Direction
Direction
#
Buffer Type
VID_SELECT
VID0
VID1
VID2
VID3
VID4
VID5
VID6
VID7
VRDSEL
VSS
AN7
AM2
AL5
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Output
Output
Output
Output
Output
Output
Output
Output
Output
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
AC6
AC7
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AD4
AM3
AL6
AD7
AE10
AE13
AE16
AE17
AE2
AK4
AL4
AM5
AM7
AL3
AE20
AE24
AE25
AE26
AE27
AE28
AE29
AE30
AE5
A12
VSS
A15
VSS
A18
VSS
A2
VSS
A21
VSS
A6
VSS
A9
VSS
AA23
AA24
AA25
AA26
AA27
AA28
AA29
AA3
VSS
AE7
VSS
AF10
AF13
AF16
AF17
AF20
AF23
AF24
AF25
AF26
AF27
AF28
AF29
AF3
VSS
VSS
VSS
VSS
VSS
VSS
AA30
AA6
VSS
VSS
AA7
VSS
AB1
VSS
AB23
AB24
AB25
AB26
AB27
AB28
AB29
AB30
AB7
VSS
VSS
VSS
AF30
AF6
VSS
VSS
AF7
VSS
AG10 Power/Other
AG13 Power/Other
AG16 Power/Other
AG17 Power/Other
VSS
VSS
VSS
AC3
48
Datasheet
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
Signal
Direction
Direction
#
Buffer Type
#
Buffer Type
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
AG20 Power/Other
AG23 Power/Other
AG24 Power/Other
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
AK30
AK5
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AK7
AG7
AH1
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AL10
AL13
AL16
AL17
AL20
AL23
AL24
AL27
AL28
AL7
AH10
AH13
AH16
AH17
AH20
AH23
AH24
AH3
AH6
AM1
AH7
AM10 Power/Other
AM13 Power/Other
AM16 Power/Other
AM17 Power/Other
AM20 Power/Other
AM23 Power/Other
AM24 Power/Other
AM27 Power/Other
AM28 Power/Other
AJ10
AJ13
AJ16
AJ17
AJ20
AJ23
AJ24
AJ27
AJ28
AJ29
AJ30
AJ4
AM4
AN1
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AN10
AN13
AN16
AN17
AN2
AJ7
AK10
AK13
AK16
AK17
AK2
AN20
AN23
AN24
AN27
AN28
B1
AK20
AK23
AK24
AK27
AK28
AK29
B11
B14
B17
Datasheet
49
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
#
Signal
Buffer Type
Direction
Direction
#
Buffer Type
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
B20
B24
B5
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
H11
H12
H13
H14
H17
H18
H19
H20
H21
H22
H23
H24
H25
H26
H27
H28
H3
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
B8
C10
C13
C16
C19
C22
C24
C4
C7
D12
D15
D18
D21
D24
D3
H6
D5
H7
D6
H8
D9
H9
E11
E14
E17
E2
J4
J7
K2
K5
E20
E25
E26
E27
E28
E8
K7
L23
L24
L25
L26
L27
L28
L29
L3
F10
F13
F16
F19
F22
F4
L30
L6
L7
F7
M1
H10
M7
50
Datasheet
Land Listing and Signal Descriptions
Table 23.
Land Name
Alphabetical Land
Assignments
Table 23.
Land Name
Alphabetical Land
Assignments
Land
Signal
Land
Signal
Direction
Direction
#
Buffer Type
#
Buffer Type
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
N3
N6
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VSS
VSS
VSS
VSS
VSS
W4
W7
Y2
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
N7
P23
P24
P25
P26
P27
P28
P29
P30
P4
Y5
Y7
VSS_MB_
REGULATION
AN6
Power/Other
Output
Output
VSS_SENSE
VSSA
VTT
AN4
B23
A25
A26
A27
A28
A29
A30
B25
B26
B27
B28
B29
B30
C25
C26
C27
C28
C29
C30
D25
D26
D27
D28
D29
D30
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VTT
VTT
VTT
P7
VTT
R2
VTT
R23
R24
R25
R26
R27
R28
R29
R30
R5
VTT
VTT
VTT
VTT
VTT
VTT
VTT
VTT
VTT
R7
VTT
T3
VTT
T6
VTT
T7
VTT
U7
VTT
V23
V24
V25
V26
V27
V28
V29
V3
VTT
VTT
VTT
VTT
VTT_OUT_
LEFT
J1
Power/Other
Output
VTT_OUT_
RIGHT
AA1
F27
Power/Other
Power/Other
Output
Output
VTT_SEL
V30
V6
V7
Datasheet
51
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Type
Land
#
Signal Buffer
Land Name
Direction
Land Name
Direction
Type
A2
A3
VSS
RS2#
D02#
D04#
VSS
Power/Other
B11
B12
VSS
Power/Other
Common Clock
Input
D13#
Source Synch Input/Output
A4
Source Synch Input/Output
Source Synch Input/Output
Power/Other
B13
B14
B15
B16
B17
B18
B19
B20
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
C1
COMP8
VSS
Power/Other
Power/Other
Input
A5
A6
D53#
D55#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
A7
D07#
DBI0#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
A8
A9
D57#
D60#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
A29
A30
B1
D08#
D09#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D59#
D63#
VSSA
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
COMP0
D50#
VSS
Power/Other
Input
Source Synch Input/Output
Power/Other
Power/Other
DSTBN3#
D56#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VTT
Power/Other
VTT
Power/Other
VTT
Power/Other
D61#
RESERVED
VSS
Source Synch Input/Output
VTT
Power/Other
VTT
Power/Other
Power/Other
VTT
Power/Other
D62#
VCCA
FC23
VTT
Source Synch Input/Output
Power/Other
DRDY#
BNR#
LOCK#
VSS
Common Clock Input/Output
Common Clock Input/Output
Common Clock Input/Output
Power/Other
C2
Power/Other
C3
Power/Other
C4
VTT
Power/Other
C5
D01#
D03#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VTT
Power/Other
C6
VTT
Power/Other
C7
VTT
Power/Other
C8
DSTBN0#
Source Synch Input/Output
VTT
Power/Other
Common
Input/Output
Clock
C9
BPMb1#
VSS
Power/Other
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
VSS
D11#
D14#
VSS
Power/Other
B2
DBSY#
RS0#
D00#
VSS
Common Clock Input/Output
Source Synch Input/Output
Source Synch Input/Output
Power/Other
B3
Common Clock
Input
B4
Source Synch Input/Output
Power/Other
B5
D52#
D51#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
B6
D05#
D06#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
B7
B8
DSTBP3#
D54#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
B9
DSTBP0#
D10#
Source Synch Input/Output
Source Synch Input/Output
B10
52
Datasheet
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Type
Land
#
Signal Buffer
Type
Land Name
Direction
Land Name
Direction
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
D1
DBI3#
D58#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D29
D30
E2
VTT
VTT
VSS
Power/Other
Power/Other
Power/Other
VCCIOPLL
VSS
Power/Other
E3
TRDY#
HITM#
FC20
Common Clock
Input
Power/Other
E4
Common Clock Input/Output
Power/Other
VTT
Power/Other
E5
VTT
Power/Other
E6
RESERVED
RESERVED
VSS
VTT
Power/Other
E7
VTT
Power/Other
E8
Power/Other
VTT
Power/Other
E9
D19#
D21#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VTT
Power/Other
E10
E11
E12
E13
E14
E15
E16
E17
E18
E19
E20
E21
E22
E23
E24
E25
E26
E27
E28
E29
F2
RESERVED
ADS#
VSS
D2
Common Clock Input/Output
Power/Other
DSTBP1#
D26#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D3
D4
HIT#
VSS
Common Clock Input/Output
Power/Other
D5
D33#
D34#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D6
VSS
Power/Other
D7
D20#
D12#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D8
D39#
D40#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D9
D10
D11
D12
D13
D14
D15
D16
D17
D18
D19
D20
D21
D22
D23
D24
D25
D26
D27
D28
D22#
D15#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D42#
D45#
RESERVED
FC10
Source Synch Input/Output
Source Synch Input/Output
D25#
RESERVED
VSS
Source Synch Input/Output
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VSS
RESERVED
D49#
VSS
VSS
Source Synch Input/Output
Power/Other
VSS
VSS
DBI2#
D48#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
FC26
GTLREF3
BR0#
VSS
Power/Other
Input
F3
Common Clock Input/Output
Power/Other
D46#
VCCPLL
VSS
Source Synch Input/Output
Power/Other
F4
F5
RS1#
FC21
Common Clock
Power/Other
Power/Other
Input
Power/Other
F6
VTT
Power/Other
F7
VSS
VTT
Power/Other
F8
D17#
D18#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VTT
Power/Other
F9
VTT
Power/Other
F10
Datasheet
53
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Type
Land
#
Signal Buffer
Land Name
Direction
Land Name
Direction
Type
F11
F12
F13
F14
F15
F16
F17
F18
F19
F20
F21
F22
F23
F24
F25
F26
F27
F28
F29
G1
D23#
D24#
Source Synch Input/Output
Source Synch Input/Output
Power/Other
G21
G22
D44#
D47#
Source Synch Input/Output
Source Synch Input/Output
VSS
G23
G24
G25
G26
G27
G28
G29
G30
H1
RESET#
TESTHI6
TESTHI3
TESTHI5
TESTHI4
BCLK1
BSEL0
BSEL2
GTLREF0
GTLREF1
VSS
Common Clock
Power/Other
Power/Other
Power/Other
Power/Other
Clock
Input
Input
Input
Input
Input
Input
Output
Output
Input
Input
D28#
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D30#
VSS
D37#
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D38#
VSS
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
D41#
Source Synch Input/Output
Source Synch Input/Output
Power/Other
D43#
VSS
H2
RESERVED
TESTHI7
TESTHI2
TESTHI0
VTT_SEL
BCLK0
RESERVED
BPMb0#
COMP2
BPMb3#
BPMb2#
PECI
H3
Power/Other
Power/Other
Power/Other
Power/Other
Clock
Input
Input
Input
Output
Input
H4
FC35
TESTHI10
VSS
H5
Input
H6
H7
VSS
H8
VSS
H9
VSS
Common Clock Input/Output
Power/Other Input
H10
H11
H12
H13
H14
H15
H16
H17
H18
H19
H20
H21
H22
H23
H24
H25
H26
H27
H28
H29
VSS
G2
VSS
G3
Common Clock Input/Output
Common Clock Input/Output
Power/Other Input/Output
VSS
G4
VSS
G5
VSS
G6
RESERVED
DEFER#
BPRI#
D16#
FC32
FC33
VSS
G7
Common Clock
Common Clock
Input
Input
G8
G9
Source Synch Input/Output
Power/Other Input
VSS
G10
G11
G12
G13
G14
G15
G16
G17
G18
G19
G20
GTLREF2
DBI1#
DSTBN1#
D27#
VSS
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
VSS
VSS
VSS
D29#
VSS
D31#
VSS
D32#
VSS
D36#
VSS
D35#
VSS
DSTBP2#
DSTBN2#
VSS
FC15
54
Datasheet
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Land
#
Signal Buffer
Type
Land Name
Direction
Land Name
Direction
Type
H30
J1
BSEL1
Power/Other
Output
Output
K23
K24
K25
K26
K27
K28
K29
K30
L1
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VTT_OUT_LEFT Power/Other
J2
FC3
FC22
VSS
Power/Other
Power/Other
Power/Other
J3
J4
J5
REQ1#
REQ4#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
J6
J7
J8
VCC
LINT1
TESTHI13
VSS
Asynch CMOS
Power/Other
Power/Other
Input
Input
J9
VCC
L2
J10
J11
J12
J13
J14
J15
J16
J17
J18
J19
J20
J21
J22
J23
J24
J25
J26
J27
J28
J29
J30
K1
VCC
L3
VCC
L4
A06#
A03#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VCC
L5
VCC
L6
VCC
L7
VSS
Power/Other
VCC
L8
VCC
Power/Other
FC31
FC34
VCC
L23
L24
L25
L26
L27
L28
L29
L30
M1
VSS
Power/Other
VSS
Power/Other
VSS
Power/Other
VCC
VSS
Power/Other
VCC
VSS
Power/Other
VCC
VSS
Power/Other
VCC
VSS
Power/Other
VCC
VSS
Power/Other
VCC
VSS
Power/Other
VCC
M2
THERMTRIP# Asynch CMOS
Output
Input
VCC
M3
STPCLK#
A07#
A05#
REQ2#
VSS
Asynch CMOS
VCC
M4
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VCC
M5
VCC
M6
VCC
M7
LINT0
VSS
Asynch CMOS
Power/Other
Asynch CMOS
Input
M8
VCC
Power/Other
K2
M23
M24
M25
M26
M27
M28
M29
VCC
Power/Other
K3
A20M#
REQ0#
VSS
Input
VCC
Power/Other
K4
Source Synch Input/Output
Power/Other
VCC
Power/Other
K5
VCC
Power/Other
K6
REQ3#
VSS
Source Synch Input/Output
Power/Other
VCC
Power/Other
K7
VCC
Power/Other
K8
VCC
Power/Other
VCC
Power/Other
Datasheet
55
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Type
Land
#
Signal Buffer
Land Name
Direction
Land Name
Direction
Type
M30
N1
VCC
Power/Other
R7
VSS
VCC
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
PWRGOOD
IGNNE#
VSS
Power/Other
Asynch CMOS
Power/Other
Input
Input
R8
N2
R23
R24
R25
R26
R27
R28
R29
R30
N3
N4
RESERVED
RESERVED
VSS
N5
N6
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Asynch CMOS
Asynch CMOS
Power/Other
N7
VSS
N8
VCC
N23
N24
N25
N26
N27
N28
N29
N30
P1
VCC
VCC
T1
T2
COMP1
FC4
Input
VCC
VCC
T3
VSS
VCC
T4
A11#
A09#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VCC
T5
VCC
T6
VCC
T7
VSS
Power/Other
TESTHI11
SMI#
INIT#
VSS
Input
Input
Input
T8
VCC
Power/Other
P2
T23
T24
T25
T26
T27
T28
T29
T30
U1
VCC
Power/Other
P3
VCC
Power/Other
P4
VCC
Power/Other
P5
RESERVED
A04#
VSS
VCC
Power/Other
P6
Source Synch Input/Output
Power/Other
VCC
Power/Other
P7
VCC
Power/Other
P8
VCC
Power/Other
VCC
Power/Other
P23
P24
P25
P26
P27
P28
P29
P30
R1
VSS
Power/Other
VCC
Power/Other
VSS
Power/Other
TDO_M
FC29
FC30
A13#
A12#
A10#
VSS
TAP
Output
VSS
Power/Other
U2
Power/Other
Power/Other
VSS
Power/Other
U3
VSS
Power/Other
U4
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VSS
Power/Other
U5
VSS
Power/Other
U6
VSS
Power/Other
U7
COMP3
VSS
Power/Other
Power/Other
Input
U8
VCC
Power/Other
R2
U23
U24
U25
U26
U27
VCC
Power/Other
R3
FERR#/PBE# Asynch CMOS
Output
VCC
Power/Other
R4
A08#
VSS
Source Synch Input/Output
Power/Other
VCC
Power/Other
R5
VCC
Power/Other
R6
ADSTB0#
Source Synch Input/Output
VCC
Power/Other
56
Datasheet
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Land
#
Signal Buffer
Type
Land Name
Direction
Land Name
Direction
Type
U28
U29
U30
V1
VCC
VCC
Power/Other
Power/Other
Power/Other
Power/Other
Y5
Y6
VSS
A19#
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
Power/Other
Source Synch Input/Output
Power/Other
VCC
Y7
MSID1
RESERVED
VSS
Output
Y8
Power/Other
V2
Y23
Y24
Y25
Y26
Y27
Y28
Y29
Y30
Power/Other
V3
Power/Other
Power/Other
V4
A15#
A14#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
Power/Other
V5
Power/Other
V6
Power/Other
V7
VSS
Power/Other
Power/Other
V8
VCC
Power/Other
Power/Other
V23
V24
V25
V26
V27
V28
V29
V30
W1
W2
W3
W4
W5
W6
W7
W8
W23
W24
W25
W26
W27
W28
W29
W30
Y1
VSS
Power/Other
Power/Other
VSS
Power/Other
VTT_OUT_
RIGHT
AA1
Power/Other
Output
VSS
Power/Other
AA2
AA3
FC39
VSS
Power/Other
Power/Other
VSS
Power/Other
VSS
Power/Other
AA4
A21#
A23#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VSS
Power/Other
AA5
VSS
Power/Other
AA6
VSS
Power/Other
AA7
VSS
Power/Other
MSID0
TDI_M
TESTHI1
VSS
Power/Other
Power/Other
Power/Other
Power/Other
Output
Input
Input
AA8
VCC
VSS
Power/Other
AA23
AA24
AA25
AA26
AA27
AA28
AA29
AA30
AB1
Power/Other
VSS
Power/Other
VSS
Power/Other
A16#
A18#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VSS
Power/Other
VSS
Power/Other
VSS
Power/Other
VCC
Power/Other
VSS
Power/Other
VCC
Power/Other
VSS
Power/Other
VCC
Power/Other
VSS
Power/Other
VCC
Power/Other
AB2
IERR#
FC37
A26#
A24#
A17#
VSS
Asynch CMOS
Power/Other
Output
VCC
Power/Other
AB3
VCC
Power/Other
AB4
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VCC
Power/Other
AB5
VCC
Power/Other
AB6
VCC
Power/Other
AB7
FC0
Power/Other
AB8
VCC
VSS
Power/Other
Y2
VSS
Power/Other
AB23
AB24
AB25
Power/Other
Y3
FC17
A20#
Power/Other
VSS
Power/Other
Y4
Source Synch Input/Output
VSS
Power/Other
Datasheet
57
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Type
Land
#
Signal Buffer
Land Name
Direction
Land Name
Direction
Type
AB26
AB27
AB28
AB29
AB30
AC1
VSS
VSS
VSS
VSS
VSS
TMS
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
TAP
AE3
FC18
Power/Other
AE4
AE5
RESERVED
VSS
Power/Other
AE6
RESERVED
VSS
AE7
C
Input
AE8
SKTOCC#
VCC
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
TAP
Output
AC2
DBR#
VSS
Power/Other
Power/Other
Output
AE9
AC3
AE10
AE11
AE12
AE13
AE14
AE15
AE16
AE17
AE18
AE19
AE20
AE21
AE22
AE23
AE24
AE25
AE26
AE27
AE28
AE29
AE30
AF1
VSS
AC4
RESERVED
A25#
VSS
VCC
AC5
Source Synch Input/Output
Power/Other
VCC
AC6
VSS
AC7
VSS
Power/Other
VCC
AC8
VCC
Power/Other
VCC
AC23
AC24
AC25
AC26
AC27
AC28
AC29
AC30
AD1
VCC
Power/Other
VSS
VCC
Power/Other
VSS
VCC
Power/Other
VCC
VCC
Power/Other
VCC
VCC
Power/Other
VSS
VCC
Power/Other
VCC
VCC
Power/Other
VCC
VCC
Power/Other
VCC
TDI
TAP
Input
VSS
AD2
BPM2#
FC36
VSS
Common Clock Input/Output
Power/Other
VSS
AD3
VSS
AD4
Power/Other
VSS
AD5
ADSTB1#
A22#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VSS
AD6
VSS
AD7
VSS
AD8
VCC
Power/Other
TDO
BPM4#
VSS
Output
AD23
AD24
AD25
AD26
AD27
AD28
AD29
AD30
AE1
VCC
Power/Other
AF2
Common Clock Input/Output
Power/Other
VCC
Power/Other
AF3
VCC
Power/Other
AF4
A28#
A27#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
VCC
Power/Other
AF5
VCC
Power/Other
AF6
VCC
Power/Other
AF7
VSS
Power/Other
VCC
Power/Other
AF8
VCC
Power/Other
VCC
Power/Other
AF9
VCC
Power/Other
TCK
TAP
Input
AF10
AF11
VSS
Power/Other
AE2
VSS
Power/Other
VCC
Power/Other
58
Datasheet
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Land
#
Signal Buffer
Type
Land Name
Direction
Land Name
Direction
Type
AF12
AF13
AF14
AF15
AF16
AF17
AF18
AF19
AF20
AF21
AF22
AF23
AF24
AF25
AF26
AF27
AF28
AF29
AF30
AG1
VCC
VSS
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
TAP
AG21
AG22
AG23
AG24
AG25
AG26
AG27
AG28
AG29
AG30
AH1
VCC
VCC
VSS
VSS
VCC
VCC
VCC
VCC
VCC
VCC
VSS
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
AH2
RESERVED
VSS
A32#
A33#
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VCC
VCC
VCC
VSS
AH3
Power/Other
VSS
AH4
Source Synch Input/Output
Source Synch Input/Output
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
VSS
AH5
VSS
AH6
VSS
AH7
VSS
AH8
VSS
AH9
TRST#
BPM3#
BPM5#
A30#
A31#
A29#
VSS
Input
AH10
AH11
AH12
AH13
AH14
AH15
AH16
AH17
AH18
AH19
AH20
AH21
AH22
AH23
AH24
AH25
AH26
AH27
AH28
AH29
AG2
Common Clock Input/Output
Common Clock Input/Output
Source Synch Input/Output
Source Synch Input/Output
Source Synch Input/Output
Power/Other
AG3
AG4
AG5
AG6
AG7
AG8
VCC
VCC
VSS
Power/Other
AG9
Power/Other
AG10
AG11
AG12
AG13
AG14
AG15
AG16
AG17
AG18
AG19
AG20
Power/Other
VCC
VCC
VSS
Power/Other
Power/Other
Power/Other
VCC
VCC
VSS
Power/Other
Power/Other
Power/Other
VSS
Power/Other
VCC
VCC
VSS
Power/Other
Power/Other
Power/Other
Datasheet
59
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Type
Land
#
Signal Buffer
Land Name
Direction
Land Name
Direction
Type
AH30
AJ1
VCC
BPM1#
BPM0#
ITP_CLK1
VSS
Power/Other
AK9
VCC
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VSS
VSS
FC25
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Common Clock Input/Output
Common Clock Input/Output
AK10
AK11
AK12
AK13
AK14
AK15
AK16
AK17
AK18
AK19
AK20
AK21
AK22
AK23
AK24
AK25
AK26
AK27
AK28
AK29
AK30
AL1
AJ2
AJ3
TAP
Input
AJ4
Power/Other
AJ5
A34#
A35#
VSS
Source Synch Input/Output
Source Synch Input/Output
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AJ6
AJ7
AJ8
VCC
AJ9
VCC
AJ10
AJ11
AJ12
AJ13
AJ14
AJ15
AJ16
AJ17
AJ18
AJ19
AJ20
AJ21
AJ22
AJ23
AJ24
AJ25
AJ26
AJ27
AJ28
AJ29
AJ30
AK1
AK2
AK3
AK4
AK5
AK6
AK7
AK8
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
AL2
AL3
PROCHOT#
VRDSEL
VID5
VID1
VID3
VSS
Asynch CMOS Input/Output
Power/Other
VSS
VCC
AL4
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Output
Output
Output
VCC
AL5
VSS
AL6
VSS
AL7
VSS
AL8
VCC
VSS
AL9
VCC
FC24
VSS
AL10
AL11
AL12
AL13
AL14
AL15
AL16
AL17
VSS
VCC
ITP_CLK0
VID4
VSS
TAP
Input
VCC
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Output
VSS
VCC
FC8
VCC
VSS
VSS
VCC
VSS
60
Datasheet
Land Listing and Signal Descriptions
Table 24.
Numerical Land
Assignment
Table 24.
Numerical Land
Assignment
Land
#
Signal Buffer
Land
#
Signal Buffer
Type
Land Name
Direction
Land Name
Direction
Type
AL18
AL19
AL20
AL21
AL22
AL23
AL24
AL25
AL26
AL27
AL28
AL29
AL30
AM1
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VID0
VID2
VSS
VID6
FC40
VID7
VCC
VCC
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AM27
AM28
AM29
AM30
AN1
VSS
VSS
VCC
VCC
VSS
VSS
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AN2
AN3
VCC_SENSE
VSS_SENSE
Power/Other
Power/Other
Output
Output
AN4
VCC_MB_
REGULATION
AN5
AN6
Power/Other
Power/Other
Output
VSS_MB_
REGULATION
Output
Output
AN7
VID_SELECT
VCC
VCC
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VCC
VCC
VSS
VSS
VCC
VCC
VSS
VSS
VCC
VCC
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
Power/Other
AN8
AN9
AM2
Output
Output
AN10
AN11
AN12
AN13
AN14
AN15
AN16
AN17
AN18
AN19
AN20
AN21
AN22
AN23
AN24
AN25
AN26
AN27
AN28
AN29
AN30
AM3
AM4
AM5
Output
Output
AM6
AM7
AM8
AM9
AM10
AM11
AM12
AM13
AM14
AM15
AM16
AM17
AM18
AM19
AM20
AM21
AM22
AM23
AM24
AM25
AM26
Datasheet
61
Land Listing and Signal Descriptions
4.2
Alphabetical Signals Reference
Table 25.
Signal Description (Sheet 1 of 9)
Name
Type
Description
A[35:3]# (Address) define a 236-byte physical memory address
space. In sub-phase 1 of the address phase, these signals transmit
the address of a transaction. In sub-phase 2, these signals transmit
transaction type information. These signals must connect the
appropriate pins/lands of all agents on the processor FSB. A[35:3]#
are source synchronous signals and are latched into the receiving
buffers by ADSTB[1:0]#.
Input/
Output
A[35:3]#
On the active-to-inactive transition of RESET#, the processor
samples a subset of the A[35:3]# signals to determine power-on
configuration. See Section 6.1 for more details.
If A20M# (Address-20 Mask) is asserted, the processor masks
physical address bit 20 (A20#) before looking up a line in any
internal cache and before driving a read/write transaction on the
bus. Asserting A20M# emulates the 8086 processor's address wrap-
around at the 1-MB boundary. Assertion of A20M# is only supported
in real mode.
A20M#
Input
A20M# is an asynchronous signal. However, to ensure recognition
of this signal following an Input/Output write instruction, it must be
valid along with the TRDY# assertion of the corresponding Input/
Output Write bus transaction.
ADS# (Address Strobe) is asserted to indicate the validity of the
transaction address on the A[35:3]# and REQ[4:0]# signals. All bus
agents observe the ADS# activation to begin protocol checking,
address decode, internal snoop, or deferred reply ID match
operations associated with the new transaction.
Input/
Output
ADS#
Address strobes are used to latch A[35:3]# and REQ[4:0]# on their
rising and falling edges. Strobes are associated with signals as
shown below.
Input/
Output
Signals
Associated Strobe
ADSTB[1:0]#
REQ[4:0]#, A[16:3]#
A[35:17]#
ADSTB0#
ADSTB1#
The differential pair BCLK (Bus Clock) determines the FSB
frequency. All processor FSB agents must receive these signals to
drive their outputs and latch their inputs.
BCLK[1:0]
BNR#
Input
All external timing parameters are specified with respect to the
rising edge of BCLK0 crossing VCROSS
.
BNR# (Block Next Request) is used to assert a bus stall by any bus
agent unable to accept new bus transactions. During a bus stall, the
current bus owner cannot issue any new transactions.
Input/
Output
62
Datasheet
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 2 of 9)
Name
Type
Description
BPM[5:0]# and BPMb[3:0]# (Breakpoint Monitor) are breakpoint
and performance monitor signals. They are outputs from the
processor which indicate the status of breakpoints and
programmable counters used for monitoring processor
performance. BPM[5:0]# and BPMb[3:0]# should connect the
appropriate pins/lands of all processor FSB agents. BPM[3:0]# are
associated with core 0. BPMb[3:0]# are associated with core 1.
BPM[5:0]#
Input/
Output
BPM4# provides PRDY# (Probe Ready) functionality for the TAP
port. PRDY# is a processor output used by debug tools to determine
processor debug readiness.
BPMb[3:0]#
BPM5# provides PREQ# (Probe Request) functionality for the TAP
port. PREQ# is used by debug tools to request debug operation of
the processor.
These signals do not have on-die termination. Refer to Section 2.5.2
for termination requirements.
BPRI# (Bus Priority Request) is used to arbitrate for ownership of
the processor FSB. It must connect the appropriate pins/lands of all
processor FSB agents. Observing BPRI# active (as asserted by the
priority agent) causes all other agents to stop issuing new requests,
unless such requests are part of an ongoing locked operation. The
priority agent keeps BPRI# asserted until all of its requests are
completed, then releases the bus by de-asserting BPRI#.
BPRI#
Input
BR0# drives the BREQ0# signal in the system and is used by the
processor to request the bus. During power-on configuration this
signal is sampled to determine the agent ID = 0.
Input/
Output
BR0#
This signal does not have on-die termination and must be
terminated.
The BCLK[1:0] frequency select signals BSEL[2:0] are used to
select the processor input clock frequency. Table 16 defines the
possible combinations of the signals and the frequency associated
BSEL[2:0]
Output with each combination. The required frequency is determined by the
processor, chipset and clock synthesizer. All agents must operate at
the same frequency. For more information about these signals,
including termination recommendations refer to Section 2.7.2.
COMP8
COMP[3:0] and COMP8 must be terminated to VSS on the system
board using precision resistors.
Analog
COMP[3:0]
Datasheet
63
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 3 of 9)
Name
Type
Description
D[63:0]# (Data) are the data signals. These signals provide a 64-
bit data path between the processor FSB agents, and must connect
the appropriate pins/lands on all such agents. The data driver
asserts DRDY# to indicate a valid data transfer.
D[63:0]# are quad-pumped signals and will, thus, be driven four
times in a common clock period. D[63:0]# are latched off the falling
edge of both DSTBP[3:0]# and DSTBN[3:0]#. Each group of 16
data signals correspond to a pair of one DSTBP# and one DSTBN#.
The following table shows the grouping of data signals to data
strobes and DBI#.
Quad-Pumped Signal Groups
Input/
Output
D[63:0]#
DSTBN#/
DSTBP#
Data Group
DBI#
D[15:0]#
D[31:16]#
D[47:32]#
D[63:48]#
0
1
2
3
0
1
2
3
Furthermore, the DBI# signals determine the polarity of the data
signals. Each group of 16 data signals corresponds to one DBI#
signal. When the DBI# signal is active, the corresponding data
group is inverted and therefore sampled active high.
DBI[3:0]# (Data Bus Inversion) are source synchronous and
indicate the polarity of the D[63:0]# signals.The DBI[3:0]# signals
are activated when the data on the data bus is inverted. If more
than half the data bits, within a 16-bit group, would have been
asserted electrically low, the bus agent may invert the data bus
signals for that particular sub-phase for that 16-bit group.
DBI[3:0] Assignment To Data Bus
Input/
DBI[3:0]#
Output
Bus Signal
Data Bus Signals
DBI3#
DBI2#
DBI1#
DBI0#
D[63:48]#
D[47:32]#
D[31:16]#
D[15:0]#
DBR# (Debug Reset) is used only in processor systems where no
debug port is implemented on the system board. DBR# is used by a
DBR#
Output debug port interposer so that an in-target probe can drive system
reset. If a debug port is implemented in the system, DBR# is a no
connect in the system. DBR# is not a processor signal.
DBSY# (Data Bus Busy) is asserted by the agent responsible for
driving data on the processor FSB to indicate that the data bus is in
use. The data bus is released after DBSY# is de-asserted. This
signal must connect the appropriate pins/lands on all processor FSB
Input/
Output
DBSY#
agents.
64
Datasheet
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 4 of 9)
Name
Type
Description
DEFER# is asserted by an agent to indicate that a transaction
cannot be guaranteed in-order completion. Assertion of DEFER# is
normally the responsibility of the addressed memory or input/
output agent. This signal must connect the appropriate pins/lands
of all processor FSB agents.
DEFER#
Input
DRDY# (Data Ready) is asserted by the data driver on each data
transfer, indicating valid data on the data bus. In a multi-common
clock data transfer, DRDY# may be de-asserted to insert idle clocks.
This signal must connect the appropriate pins/lands of all processor
FSB agents.
Input/
Output
DRDY#
DSTBN[3:0]# are the data strobes used to latch in D[63:0]#.
Signals
Associated Strobe
D[15:0]#, DBI0#
D[31:16]#, DBI1#
D[47:32]#, DBI2#
D[63:48]#, DBI3#
DSTBN0#
DSTBN1#
DSTBN2#
DSTBN3#
Input/
Output
DSTBN[3:0]#
DSTBP[3:0]# are the data strobes used to latch in D[63:0]#.
Signals
Associated Strobe
D[15:0]#, DBI0#
D[31:16]#, DBI1#
D[47:32]#, DBI2#
D[63:48]#, DBI3#
DSTBP0#
DSTBP1#
DSTBP2#
DSTBP3#
Input/
Output
DSTBP[3:0]#
FC signals are signals that are available for compatibility with other
processors.
FCx
Other
FERR#/PBE# (floating point error/pending break event) is a
multiplexed signal and its meaning is qualified by STPCLK#. When
STPCLK# is not asserted, FERR#/PBE# indicates a floating-point
error and will be asserted when the processor detects an unmasked
floating-point error. When STPCLK# is not asserted, FERR#/PBE# is
similar to the ERROR# signal on the Intel 387 coprocessor, and is
included for compatibility with systems using MS-DOS*-type
floating-point error reporting. When STPCLK# is asserted, an
assertion of FERR#/PBE# indicates that the processor has a
pending break event waiting for service. The assertion of FERR#/
PBE# indicates that the processor should be returned to the Normal
state. For additional information on the pending break event
functionality, including the identification of support of the feature
and enable/disable information, refer to volume 3 of the Intel
Architecture Software Developer's Manual and the Intel Processor
Identification and the CPUID Instruction application note.
FERR#/PBE#
Output
GTLREF[3:0] determine the signal reference level for GTL+ input
signals. GTLREF is used by the GTL+ receivers to determine if a
signal is a logical 0 or logical 1.
GTLREF[3:0]
Input
Datasheet
65
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 5 of 9)
Name
Type
Description
Input/
Output
HIT# (Snoop Hit) and HITM# (Hit Modified) convey transaction
snoop operation results. Any FSB agent may assert both HIT# and
HITM# together to indicate that it requires a snoop stall, which can
be continued by reasserting HIT# and HITM# together.
HIT#
HITM#
IERR#
Input/
Output
IERR# (Internal Error) is asserted by a processor as the result of an
internal error. Assertion of IERR# is usually accompanied by a
SHUTDOWN transaction on the processor FSB. This transaction may
optionally be converted to an external error signal (e.g., NMI) by
system core logic. The processor will keep IERR# asserted until the
assertion of RESET#.
Output
This signal does not have on-die termination. Refer to Section 2.5.2
for termination requirements.
IGNNE# (Ignore Numeric Error) is asserted to the processor to
ignore a numeric error and continue to execute noncontrol floating-
point instructions. If IGNNE# is de-asserted, the processor
generates an exception on a noncontrol floating-point instruction if
a previous floating-point instruction caused an error. IGNNE# has
no effect when the NE bit in control register 0 (CR0) is set.
IGNNE#
Input
IGNNE# is an asynchronous signal. However, to ensure recognition
of this signal following an Input/Output write instruction, it must be
valid along with the TRDY# assertion of the corresponding Input/
Output Write bus transaction.
INIT# (Initialization), when asserted, resets integer registers inside
the processor without affecting its internal caches or floating-point
registers. The processor then begins execution at the power-on
Reset vector configured during power-on configuration. The
processor continues to handle snoop requests during INIT#
assertion. INIT# is an asynchronous signal and must connect the
appropriate pins/lands of all processor FSB agents.
INIT#
Input
Input
ITP_CLK[1:0] are copies of BCLK that are used only in processor
systems where no debug port is implemented on the system board.
ITP_CLK[1:0] are used as BCLK[1:0] references for a debug port
implemented on an interposer. If a debug port is implemented in the
system, ITP_CLK[1:0] are no connects in the system. These are not
processor signals.
ITP_CLK[1:0]
LINT[1:0] (Local APIC Interrupt) must connect the appropriate
pins/lands of all APIC Bus agents. When the APIC is disabled, the
LINT0 signal becomes INTR, a maskable interrupt request signal,
and LINT1 becomes NMI, a nonmaskable interrupt. INTR and NMI
are backward compatible with the signals of those names on the
Pentium processor. Both signals are asynchronous.
LINT[1:0]
Input
Both of these signals must be software configured via BIOS
programming of the APIC register space to be used either as NMI/
INTR or LINT[1:0]. Because the APIC is enabled by default after
Reset, operation of these signals as LINT[1:0] is the default
configuration.
66
Datasheet
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 6 of 9)
Name
Type
Description
LOCK# indicates to the system that a transaction must occur
atomically. This signal must connect the appropriate pins/lands of
all processor FSB agents. For a locked sequence of transactions,
LOCK# is asserted from the beginning of the first transaction to the
end of the last transaction.
Input/
Output
LOCK#
When the priority agent asserts BPRI# to arbitrate for ownership of
the processor FSB, it will wait until it observes LOCK# de-asserted.
This enables symmetric agents to retain ownership of the processor
FSB throughout the bus locked operation and ensure the atomicity
of lock.
Input/ PECI is a proprietary one-wire bus interface. See Section 5.3 for
Output details.
PECI
As an output, PROCHOT# (Processor Hot) will go active when the
processor temperature monitoring sensor detects that the processor
has reached its maximum safe operating temperature. This
Input/ indicates that the processor Thermal Control Circuit (TCC) has been
Output activated, if enabled. As an input, assertion of PROCHOT# by the
system will activate the TCC, if enabled. The TCC will remain active
until the system de-asserts PROCHOT#. See Section 5.2.4 for more
details.
PROCHOT#
PWRGOOD (Power Good) is a processor input. The processor
requires this signal to be a clean indication that the clocks and
power supplies are stable and within their specifications. ‘Clean’
implies that the signal will remain low (capable of sinking leakage
current), without glitches, from the time that the power supplies are
turned on until they come within specification. The signal must then
transition monotonically to a high state. PWRGOOD can be driven
inactive at any time, but clocks and power must again be stable
before a subsequent rising edge of PWRGOOD.
PWRGOOD
REQ[4:0]#
RESET#
Input
The PWRGOOD signal must be supplied to the processor; it is used
to protect internal circuits against voltage sequencing issues. It
should be driven high throughout boundary scan operation.
REQ[4:0]# (Request Command) must connect the appropriate pins/
Input/ lands of all processor FSB agents. They are asserted by the current
Output bus owner to define the currently active transaction type. These
signals are source synchronous to ADSTB0#.
Asserting the RESET# signal resets the processor to a known state
and invalidates its internal caches without writing back any of their
contents. For a power-on Reset, RESET# must stay active for at
least one millisecond after VCC and BCLK have reached their proper
specifications. On observing active RESET#, all FSB agents will de-
assert their outputs within two clocks. RESET# must not be kept
Input
asserted for more than 10 ms while PWRGOOD is asserted.
A number of bus signals are sampled at the active-to-inactive
transition of RESET# for power-on configuration. These
configuration options are described in the Section 6.1.
This signal does not have on-die termination and must be
terminated on the system board.
All RESERVED lands must remain unconnected. Connection of these
lands to VCC, VSS, VTT, or to any other signal (including each other)
can result in component malfunction or incompatibility with future
processors.
RESERVED
Datasheet
67
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 7 of 9)
Name
Type
Description
RS[2:0]# (Response Status) are driven by the response agent (the
agent responsible for completion of the current transaction), and
must connect the appropriate pins/lands of all processor FSB
agents.
RS[2:0]#
Input
SKTOCC# (Socket Occupied) will be pulled to ground by the
SKTOCC#
SMI#
Output processor. System board designers may use this signal to determine
if the processor is present.
SMI# (System Management Interrupt) is asserted asynchronously
by system logic. On accepting a System Management Interrupt, the
processor saves the current state and enter System Management
Mode (SMM). An SMI Acknowledge transaction is issued, and the
processor begins program execution from the SMM handler.
Input
If SMI# is asserted during the de-assertion of RESET#, the
processor will tri-state its outputs.
STPCLK# (Stop Clock), when asserted, causes the processor to
enter a low power Stop Grant state. The processor issues a Stop
Grant Acknowledge transaction, and stops providing internal clock
signals to all processor core units except the FSB and APIC units.
The processor continues to snoop bus transactions and service
interrupts while in Stop Grant state. When STPCLK# is de-asserted,
the processor restarts its internal clock to all units and resumes
execution. The assertion of STPCLK# has no effect on the bus clock;
STPCLK# is an asynchronous input.
STPCLK#
Input
TCK (Test Clock) provides the clock input for the processor Test Bus
(also known as the Test Access Port).
TCK
Input
Input
TDI and TDI_M (Test Data In) transfer serial test data into the
processor cores. TDI and TDI_M provide the serial input needed for
JTAG specification support. TDI connects to core 0. TDI_M connects
to core 1.
TDI, TDI_M
TDO and TDO_M (Test Data Out) transfer serial test data out of the
processor cores. TDO and TDI_M provide the serial output needed
for JTAG specification support. TDO connects to core 1. TDO_M
connects to core 0.
TDO, TDO_M
Output
Input
TESTHI[13,11:10,7:0] must be connected to the processor’s
appropriate power source (refer to VTT_OUT_LEFT and
VTT_OUT_RIGHT signal description) through a resistor for proper
processor operation. See Section 2.4 for more details.
TESTHI[13,
11:10,7:0]
68
Datasheet
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 8 of 9)
Name
Type
Description
In the event of a catastrophic cooling failure, the processor will
automatically shut down when the silicon has reached a
temperature approximately 20 °C above the maximum TC. Assertion
of THERMTRIP# (Thermal Trip) indicates the processor junction
temperature has reached a level beyond where permanent silicon
damage may occur. Upon assertion of THERMTRIP#, the processor
will shut off its internal clocks (thus, halting program execution) in
an attempt to reduce the processor junction temperature. To protect
the processor, its core voltage (VCC) must be removed following the
THERMTRIP#
Output assertion of THERMTRIP#. Driving of the THERMTRIP# signal is
enabled within 10 μs of the assertion of PWRGOOD (provided VTT
and VCC are valid) and is disabled on de-assertion of PWRGOOD (if
V
TT or VCC are not valid, THERMTRIP# may also be disabled). Once
activated, THERMTRIP# remains latched until PWRGOOD, VTT, or
CC is de-asserted. While the de-assertion of the PWRGOOD, VTT, or
V
VCC will de-assert THERMTRIP#, if the processor’s junction
temperature remains at or above the trip level, THERMTRIP# will
again be asserted within 10 μs of the assertion of PWRGOOD
(provided VTT and VCC are valid).
TMS (Test Mode Select) is a JTAG specification support signal used
by debug tools.
TMS
Input
Input
Input
TRDY# (Target Ready) is asserted by the target to indicate that it is
ready to receive a write or implicit writeback data transfer. TRDY#
must connect the appropriate pins/lands of all FSB agents.
TRDY#
TRST#
TRST# (Test Reset) resets the Test Access Port (TAP) logic. TRST#
must be driven low during power on Reset.
VCC are the power pins for the processor. The voltage supplied to
these pins is determined by the VID[7:0] pins.
VCC
Input
Input
VCCPLL
VCCPLL provides isolated power for internal processor FSB PLLs.
VCC_SENSE is an isolated low impedance connection to processor
VCC_SENSE
Output core power (VCC). It can be used to sense or measure voltage near
the silicon with little noise.
This land is provided as a voltage regulator feedback sense point for
V
CC. It is connected internally in the processor package to the sense
VCC_MB_
REGULATION
Output point land U27 as described in the Voltage Regulator-Down (VRD)
11.0 Processor Power Delivery Design Guidelines For Desktop
LGA775 Socket.
VID[7:0] (Voltage ID) signals are used to support automatic
selection of power supply voltages (VCC). Refer to the Voltage
Regulator-Down (VRD) 11.0 Processor Power Delivery Design
Guidelines For Desktop LGA775 Socket for more information. The
voltage supply for these signals must be valid before the VR can
Output supply VCC to the processor. Conversely, the VR output must be
disabled until the voltage supply for the VID signals becomes valid.
The VID signals are needed to support the processor voltage
specification variations. See Table 2 for definitions of these signals.
The VR must supply the voltage that is requested by the signals, or
disable itself.
VID[7:0]
This land is tied high on the processor package and is used by the
VR to choose the proper VID table. Refer to the Voltage Regulator-
Down (VRD) 11.0 Processor Power Delivery Design Guidelines For
VID_SELECT
Output
Desktop LGA775 Socket for more information.
Datasheet
69
Land Listing and Signal Descriptions
Table 25.
Signal Description (Sheet 9 of 9)
Name
Type
Description
This input should be left as a no connect in order for the processor
to boot. The processor will not boot on legacy platforms where this
VRDSEL
Input
land is connected to VSS
.
VSS are the ground pins for the processor and should be connected
to the system ground plane.
VSS
Input
Input
VSSA
VSSA is the isolated ground for internal PLLs.
VSS_SENSE is an isolated low impedance connection to processor
VSS_SENSE
Output core VSS. It can be used to sense or measure ground near the
silicon with little noise.
This land is provided as a voltage regulator feedback sense point for
V
SS. It is connected internally in the processor package to the sense
VSS_MB_
REGULATION
Output point land V27 as described in the Voltage Regulator-Down (VRD)
11.0 Processor Power Delivery Design Guidelines For Desktop
LGA775 Socket.
VTT
Miscellaneous voltage supply.
VTT_OUT_LEFT
The VTT_OUT_LEFT and VTT_OUT_RIGHT signals are included to
Output provide a voltage supply for some signals that require termination
to VTT on the motherboard.
VTT_OUT_RIGHT
VTT_SEL
The VTT_SEL signal is used to select the correct VTT voltage level for
Output the processor. This land is connected internally in the package to
VTT.
§ §
70
Datasheet
Thermal Specifications and Design Considerations
5
Thermal Specifications and
Design Considerations
5.1
Processor Thermal Specifications
The processor requires a thermal solution to maintain temperatures within the
operating limits as set forth in Section 5.1.1. Any attempt to operate the processor
outside these operating limits may result in permanent damage to the processor and
potentially other components within the system. As processor technology changes,
thermal management becomes increasingly crucial when building computer systems.
Maintaining the proper thermal environment is key to reliable, long-term system
operation.
A complete thermal solution includes both component and system level thermal
management features. Component level thermal solutions can include active or passive
heatsinks attached to the processor Integrated Heat Spreader (IHS). Typical system
level thermal solutions may consist of system fans combined with ducting and venting.
For more information on designing a component level thermal solution, refer to the
appropriate Thermal and Mechanical Design Guidelines (see Section 1.2).
Note:
The boxed processor will ship with a component thermal solution. Refer to Chapter 7
for details on the boxed processor.
5.1.1
Thermal Specifications
To allow for the optimal operation and long-term reliability of Intel processor-based
systems, the system/processor thermal solution should be designed such that the
processor remains within the minimum and maximum case temperature (TC)
specifications when operating at or below the Thermal Design Power (TDP) value listed
per frequency in Table 26. Thermal solutions not designed to provide this level of
thermal capability may affect the long-term reliability of the processor and system. For
more details on thermal solution design, refer to the appropriate Thermal and
Mechanical Design Guidelines (see Section 1.2).
The processor uses a methodology for managing processor temperatures which is
intended to support acoustic noise reduction through fan speed control. Selection of the
appropriate fan speed is based on the relative temperature data reported by the
processor’s Platform Environment Control Interface (PECI) bus as described in
Section 5.3.1.1. The temperature reported over PECI is always a negative value and
represents a delta below the onset of thermal control circuit (TCC) activation, as
indicated by PROCHOT# (see Section 5.2). Systems that implement fan speed control
must be designed to take these conditions in to account. Systems that do not alter the
fan speed only need to guarantee the case temperature meets the thermal profile
specifications.
To determine a processor's case temperature specification based on the thermal profile,
it is necessary to accurately measure processor power dissipation. Intel has developed
a methodology for accurate power measurement that correlates to Intel test
temperature and voltage conditions. Refer to the appropriate Thermal and Mechanical
Design Guidelines (see Section 1.2).
Datasheet
71
Thermal Specifications and Design Considerations
The case temperature is defined at the geometric top center of the processor. Analysis
indicates that real applications are unlikely to cause the processor to consume
maximum power dissipation for sustained time periods. Intel recommends that
complete thermal solution designs target the Thermal Design Power (TDP) indicated in
Table 26 instead of the maximum processor power consumption. The Thermal Monitor
feature is designed to protect the processor in the unlikely event that an application
exceeds the TDP recommendation for a sustained periods of time. For more details on
the usage of this feature, refer to Section 5.2. In all cases the Thermal Monitor and
Thermal Monitor 2 feature must be enabled for the processor to remain within
specification.
Table 26.
Processor Thermal Specifications
Core
Frequency
(GHz)
Thermal
Design
Power (W)
Extended
775_VR_
Processor
Number
Minimum Maximum
HALT Power CONFIG_05A
Notes
TC (°C)
TC (°C)
(W)1
/B Guidance2
QX6850
QX6800
QX6700
3.00
2.93
2.66
130
130
130
37
37
50
5
5
5
See
Table 27,
Figure 15
775_VR_CONF
IG_05B
3,
4
See
Table 29,
Figure 17
775_VR_CONF
IG_05A
3, 4
Q6700
Q6600
2.66
2.40
2.40
95
105
95
24
50
24
5
5
5
See
Table 28,
Figure 16
775_VR_CONF
IG_05B
3, 4, 5
3, 4, 6
See
Table 29,
Figure 17
775_VR_CONF
IG_05A
Q6600
NOTES:
1. Specification is at 50 °C TC and typical voltage loadline.
2. 775_VR_CONFIG_05B guidelines provide a design target for meeting future thermal requirements.
3. Thermal Design Power (TDP) should be used for processor thermal solution design targets. The TDP is not
the maximum power that the processor can dissipate.
4. This table shows the maximum TDP for a given frequency range. Individual processors may have a lower
TDP. Therefore, the maximum TC will vary depending on the TDP of the individual processor. Refer to
thermal profile figure and associated table for the allowed combinations of power and TC.
5. These processors have CPUID = 06F7h
6. These processors have CPUID = 06FBh
72
Datasheet
Thermal Specifications and Design Considerations
Table 27.
Thermal Profile for 130 W Processors
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
0
42.4
42.7
43.1
43.4
43.8
44.1
44.4
44.8
45.1
45.5
45.8
46.1
46.5
46.8
47.2
47.5
47.8
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
48.2
48.5
48.9
49.2
49.5
49.9
50.2
50.6
50.9
51.2
51.6
51.9
52.3
53.1
52.9
53.3
53.6
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
54.0
54.3
54.6
55.0
55.3
57.7
56.0
56.3
56.7
57.0
57.4
57.7
58.0
58.4
58.7
59.1
59.4
102
104
106
108
110
112
114
116
118
120
122
124
126
128
130
59.7
60.1
60.4
60.8
61.1
61.4
61.8
62.1
62.5
62.8
63.1
63.5
63.8
64.1
64.5
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
Figure 15.
Thermal Profile for 130 W Processors
65.0
60.0
55.0
50.0
45.0
40.0
y = 0.17x + 42.4
0
10
20
30
40
50
60
70
80
90
100
110
120
130
Power (W)
Datasheet
73
Thermal Specifications and Design Considerations
Table 28.
Thermal Profile for 105 W Processors
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
0
43.3
43.7
44.0
44.4
44.7
45.1
45.5
45.7
46.1
46.4
46.9
47.3
47.6
48.0
28
30
32
34
36
38
40
42
44
46
48
50
52
54
48.3
48.7
49.1
49.4
49.8
50.1
50.5
50.9
51.2
51.6
51.9
52.3
52.7
53.0
56
58
60
62
64
66
68
70
72
74
76
78
80
82
53.4
53.8
54.1
54.5
54.9
55.2
55.4
55.9
56.3
56.7
57.0
57.4
57.7
58.1
84
86
58.4
58.8
59.1
59.5
59.9
60.3
60.6
60.9
61.3
61.7
62.0
62.2
2
4
88
6
90
8
92
10
12
14
16
18
20
22
24
26
94
96
98
100
102
104
105
Figure 16.
Thermal Profile for 105 W Processors
65.0
60.0
55.0
50.0
45.0
40.0
y = 0.18x + 43.3
0
10
20
30
40
50
60
70
80
90
100
110
120
130
Power (W)
74
Datasheet
Thermal Specifications and Design Considerations
Table 29.
Thermal Profile 95 W Processors
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
Power
(W)
Maximum
Tc (°C)
0
44.4
45.0
45.5
46.1
46.6
47.2
47.8
48.3
48.9
49.4
50.0
50.6
51.1
51.7
28
30
32
34
36
38
40
42
44
46
48
50
52
54
52.2
52.8
53.4
53.9
54.5
55.0
55.6
56.2
56.7
57.3
57.8
58.4
59.0
59.5
56
58
60
62
64
66
68
70
72
74
76
78
80
82
60.1
60.6
61.2
61.8
62.3
62.9
63.4
64.0
64.6
65.1
65.7
66.2
66.8
67.4
84
86
88
90
92
94
95
67.9
68.5
69.0
69.6
70.2
70.7
71.0
2
4
6
8
10
12
14
16
18
20
22
24
26
Figure 17.
Thermal Profile 95 W Processors
Datasheet
75
Thermal Specifications and Design Considerations
5.1.2
Thermal Metrology
The maximum and minimum case temperatures (TC) for the processor is specified in
Table 26. This temperature specification is meant to help ensure proper operation of
the processor. Figure 18 illustrates where Intel recommends TC thermal measurements
should be made. For detailed guidelines on temperature measurement methodology,
refer to the appropriate Thermal and Mechanical Design Guidelines (see Section 1.2).
Figure 18.
Case Temperature (TC) Measurement Location
Measure TC atthis point
(geometric center of the package)
37.5 mm
5.2
Processor Thermal Features
5.2.1
Thermal Monitor
The Thermal Monitor feature helps control the processor temperature by activating the
thermal control circuit (TCC) when the processor silicon reaches its maximum operating
temperature. The TCC reduces processor power consumption by modulating (starting
and stopping) the internal processor core clocks. The Thermal Monitor feature must
be enabled for the processor to be operating within specifications. The
temperature at which Thermal Monitor activates the thermal control circuit is not user
configurable and is not software visible. Bus traffic is snooped in the normal manner,
and interrupt requests are latched (and serviced during the time that the clocks are on)
while the TCC is active.
When the Thermal Monitor feature is enabled, and a high temperature situation exists
(i.e., TCC is active), the clocks will be modulated by alternately turning the clocks off
and on at a duty cycle specific to the processor (typically 30–50%). Clocks often will
not be off for more than 3.0 microseconds when the TCC is active. Cycle times are
processor speed dependent and will decrease as processor core frequencies increase. A
small amount of hysteresis has been included to prevent rapid active/inactive
transitions of the TCC when the processor temperature is near its maximum operating
temperature. Once the temperature has dropped below the maximum operating
temperature, and the hysteresis timer has expired, the TCC goes inactive and clock
modulation ceases.
With a properly designed and characterized thermal solution, it is anticipated that the
TCC would only be activated for very short periods of time when running the most
power intensive applications. The processor performance impact due to these brief
periods of TCC activation is expected to be so minor that it would be immeasurable. An
76
Datasheet
Thermal Specifications and Design Considerations
under-designed thermal solution that is not able to prevent excessive activation of the
TCC in the anticipated ambient environment may cause a noticeable performance loss,
and in some cases may result in a TC that exceeds the specified maximum temperature
and may affect the long-term reliability of the processor. In addition, a thermal solution
that is significantly under-designed may not be capable of cooling the processor even
when the TCC is active continuously. Refer to the appropriate Thermal and Mechanical
Design Guidelines (see Section 1.2) for information on designing a thermal solution.
The duty cycle for the TCC, when activated by the Thermal Monitor, is factory
configured and cannot be modified. The Thermal Monitor does not require any
additional hardware, software drivers, or interrupt handling routines.
5.2.2
Thermal Monitor 2
The processor also supports an additional power reduction capability known as Thermal
Monitor 2. This mechanism provides an efficient means for limiting the processor
temperature by reducing the power consumption within the processor.
When Thermal Monitor 2 is enabled, and a high temperature situation is detected, the
Thermal Control Circuit (TCC) will be activated. The TCC causes the processor to adjust
its operating frequency (via the bus multiplier) and input voltage (via the VID signals).
This combination of reduced frequency and VID results in a reduction to the processor
power consumption.
A processor enabled for Thermal Monitor 2 includes two operating points, each
consisting of a specific operating frequency and voltage. The first operating point
represents the normal operating condition for the processor. Under this condition, the
core-frequency-to-FSB multiple utilized by the processor is that contained in the
CLOCK_FLEX_MAX MSR and the VID is that specified in Table 4. These parameters
represent normal system operation.
The second operating point consists of both a lower operating frequency and voltage.
When the TCC is activated, the processor automatically transitions to the new
frequency. This transition occurs very rapidly (on the order of 5 μs). During the
frequency transition, the processor is unable to service any bus requests, and
consequently, all bus traffic is blocked. Edge-triggered interrupts will be latched and
kept pending until the processor resumes operation at the new frequency.
Once the new operating frequency is engaged, the processor will transition to the new
core operating voltage by issuing a new VID code to the voltage regulator. The voltage
regulator must support dynamic VID steps in order to support Thermal Monitor 2.
During the voltage change, it will be necessary to transition through multiple VID codes
to reach the target operating voltage. Each step will likely be one VID table entry (see
Table 4). The processor continues to execute instructions during the voltage transition.
Operation at the lower voltage reduces the power consumption of the processor.
A small amount of hysteresis has been included to prevent rapid active/inactive
transitions of the TCC when the processor temperature is near its maximum operating
temperature. Once the temperature has dropped below the maximum operating
temperature, and the hysteresis timer has expired, the operating frequency and
voltage transition back to the normal system operating point. Transition of the VID code
will occur first, in order to insure proper operation once the processor reaches its
normal operating frequency. Refer to Figure 19 for an illustration of this ordering.
Datasheet
77
Thermal Specifications and Design Considerations
Figure 19.
Thermal Monitor 2 Frequency and Voltage Ordering
TTM2
Temperature
Frequency
fMAX
fTM2
VID
VIDTM2
VID
PROCHOT#
The PROCHOT# signal is asserted when a high temperature situation is detected,
regardless of whether Thermal Monitor or Thermal Monitor 2 is enabled.
It should be noted that the Thermal Monitor 2 TCC cannot be activated via the on
demand mode. The Thermal Monitor TCC, however, can be activated through the use of
the on demand mode.
5.2.3
On-Demand Mode
The processor provides an auxiliary mechanism that allows system software to force
the processor to reduce its power consumption. This mechanism is referred to as “On-
Demand” mode and is distinct from the Thermal Monitor feature. On-Demand mode is
intended as a means to reduce system level power consumption. Systems using the
processor must not rely on software usage of this mechanism to limit the processor
temperature.
The processor provides an auxiliary mechanism that allows system software to force
the processor to reduce its power consumption. This mechanism is referred to as “On-
Demand” mode and is distinct from the Thermal Monitor and Thermal Monitor 2
features. On-Demand mode is intended as a means to reduce system level power
consumption. Systems utilizing the Clovertown processor s must not rely on software
usage of this mechanism to limit the processor temperature. If bit 4 of the
IA32_CLOCK_MODULATION MSR is set to a ‘1’, the processor will immediately reduce
its power consumption via modulation (starting and stopping) of the internal core clock,
independent of the processor temperature. When using On-Demand mode, the duty
cycle of the clock modulation is programmable via bits 3:1 of the same
IA32_CLOCK_MODULATION MSR. In On-Demand mode, the duty cycle can be
programmed from 12.5% on/ 87.5% off to 87.5% on/ 12.5% off in 12.5% increments.
On-Demand mode may be used in conjunction with the Thermal Monitor; however, if
the system tries to enable On-Demand mode at the same time the TCC is engaged, the
factory configured duty cycle of the TCC will override the duty cycle selected by the On-
Demand mode.
78
Datasheet
Thermal Specifications and Design Considerations
5.2.4
PROCHOT# Signal
An external signal, PROCHOT# (processor hot), is asserted when the processor core
temperature has reached its maximum operating temperature. If the Thermal Monitor
is enabled (note that the Thermal Monitor must be enabled for the processor to be
operating within specification), the TCC will be active when PROCHOT# is asserted. The
processor can be configured to generate an interrupt upon the assertion or de-
assertion of PROCHOT#.
As an output, PROCHOT# (Processor Hot) will go active when the processor
temperature monitoring sensor detects that one or both cores has reached its
maximum safe operating temperature. This indicates that the processor Thermal
Control Circuit (TCC) has been activated, if enabled. As an input, assertion of
PROCHOT# by the system will activate the TCC, if enabled, for both cores. The TCC will
remain active until the system de-asserts PROCHOT#.
PROCHOT# allows for some protection of various components from over-temperature
situations. The PROCHOT# signal is bi-directional in that it can either signal when the
processor (either core) has reached its maximum operating temperature or be driven
from an external source to activate the TCC. The ability to activate the TCC via
PROCHOT# can provide a means for thermal protection of system components.
PROCHOT# can allow VR thermal designs to target maximum sustained current instead
of maximum current. Systems should still provide proper cooling for the VR, and rely
on PROCHOT# only as a backup in case of system cooling failure. The system thermal
design should allow the power delivery circuitry to operate within its temperature
specification even while the processor is operating at its Thermal Design Power. With a
properly designed and characterized thermal solution, it is anticipated that PROCHOT#
would only be asserted for very short periods of time when running the most power
intensive applications. An under-designed thermal solution that is not able to prevent
excessive assertion of PROCHOT# in the anticipated ambient environment may cause a
noticeable performance loss. Refer to the the Voltage Regulator-Down (VRD) 11.0
Processor Power Delivery Design Guidelines For Desktop LGA775 Socket for details on
implementing the bi-directional PROCHOT# feature.
5.2.5
THERMTRIP# Signal
Regardless of whether or not Thermal Monitor or Thermal Monitor 2 is enabled, in the
event of a catastrophic cooling failure, the processor will automatically shut down when
the silicon has reached an elevated temperature (refer to the THERMTRIP# definition in
Table 25). At this point, the FSB signal THERMTRIP# will go active and stay active as
described in Table 25. THERMTRIP# activation is independent of processor activity and
does not generate any bus cycles. If THERMTRIP# is asserted, processor core voltage
(VCC) must be removed within the timeframe defined in Table 10.
Datasheet
79
Thermal Specifications and Design Considerations
5.3
Platform Environment Control Interface (PECI)
5.3.1
Introduction
PECI offers an interface for thermal monitoring of Intel processor and chipset
components. It uses a single wire; thus, alleviating routing congestion issues. PECI
uses CRC checking on the host side to ensure reliable transfers between the host and
client devices. Also, data transfer speeds across the PECI interface are negotiable
within a wide range (2 Kbps to 2 Mbps). The PECI interface on the processor is disabled
by default and must be enabled through BIOS.
5.3.1.1
T
and TCC Activation on PECI-Based Systems
CONTROL
Fan speed control solutions based on PECI use a TCONTROL value stored in the processor
IA32_TEMPERATURE_TARGET MSR. The TCONTROL MSR uses the same offset
temperature format as PECI though it contains no sign bit. Thermal management
devices should infer the TCONTROL value as negative. Thermal management algorithms
should use the relative temperature value delivered over PECI in conjunction with the
TCONTROL MSR value to control or optimize fan speeds. Figure 20 shows a conceptual
fan control diagram using PECI temperatures.
The relative temperature value reported over PECI represents the delta below the onset
of thermal control circuit (TCC) activation as indicated by PROCHOT# assertions. As the
temperature approaches TCC activation, the PECI value approaches zero. TCC activates
at a PECI count of zero.
.
Figure 20.
Conceptual Fan Control on PECI-Based Platforms
TCONTROL
Setting
TCC Activation
Temperature
PECI = 0
Max
PECI = -10
Fan Speed
(RPM)
Min
PECI = -20
Temperature
Note: Not intended to depict actual implementation
80
Datasheet
Thermal Specifications and Design Considerations
5.3.2
PECI Specifications
5.3.2.1
PECI Device Address
The socket 0 PECI register resides at address 30h and socket 1 resides at 31h. Note
that each address also supports two domains (Domain 0 and Domain 1). For more
information on PECI domains, refer to the Platform Environment Control Interface
Specification.
5.3.2.2
5.3.2.3
PECI Command Support
PECI command support is covered in detail in the Platform Environment Control
Interface Specification. Refer to this document for details on supported PECI command
function and codes.
PECI Fault Handling Requirements
PECI is largely a fault tolerant interface, including noise immunity and error checking
improvements over other comparable industry standard interfaces. The PECI client is
as reliable as the device that it is embedded in, and thus given operating conditions
that fall under the specification, the PECI will always respond to requests and the
protocol itself can be relied upon to detect any transmission failures. There are,
however, certain scenarios where the PECI is known to be unresponsive.
Prior to a power on RESET# and during RESET# assertion, PECI is not ensured to
provide reliable thermal data. System designs should implement a default power-on
condition that ensures proper processor operation during the time frame when reliable
data is not available via PECI.
To protect platforms from potential operational or safety issues due to an abnormal
condition on PECI, the Host controller should take action to protect the system from
possible damaging states. It is recommended that the PECI host controller take
appropriate action to protect the client processor device if valid temperature readings
have not been obtained in response to three consecutive GetTemp0()s or GetTemp1()s
or for a one second time interval. The host controller may also implement an alert to
software in the event of a critical or continuous fault condition.
5.3.2.4
PECI GetTemp0() and GetTemp1() Error Code Support
The error codes supported for the processor GetTemp0() and GetTemp1() commands
are listed in Table 30.
Table 30.
GetTemp0() and GetTemp1() Error Codes
Error Code
8000h
Description
General sensor error
Sensor is operational, but has detected a temperature below its operational
range (underflow).
8002h
§ §
Datasheet
81
Thermal Specifications and Design Considerations
82
Datasheet
Features
6
Features
6.1
Power-On Configuration Options
Several configuration options can be configured by hardware. The processor samples
the hardware configuration at reset, on the active-to-inactive transition of RESET#. For
specifications on these options, refer to Table 31.
The sampled information configures the processor for subsequent operation. These
configuration options cannot be changed except by another reset. All resets reconfigure
the processor; for reset purposes, the processor does not distinguish between a
"warm" reset and a "power-on" reset.
Table 31.
Power-On Configuration Option Signals
Configuration Option
Output tristate
Signal1,2,3
SMI#
Execute BIST
A3#
Disable dynamic bus parking
Symmetric agent arbitration ID
RESERVED
A25#
BR0#
A[8:5]#, A[24:11]#, A[35:26]#
NOTES:
1. Asserting this signal during RESET# will select the corresponding option.
2. Address signals not identified in this table as configuration options should not
be asserted during RESET#.
3. Disabling of any of the cores within the processor must be handled by
configuring the EXT_CONFIG Model Specific Register (MSR). This MSR will allow
for the disabling of a single core per die within the package.
6.2
Clock Control and Low Power States
The processor allows the use of AutoHALT and Stop Grant states to reduce power
consumption by stopping the clock to internal sections of the processor, depending on
each particular state. See Figure 21 for a visual representation of the processor low
power states.
Datasheet
83
Features
Figure 21.
Processor Low Power State Machine
HALT or MWAIT Instruction and
HALT Bus Cycle Generated
Extended HALT or HALT
State
- BCLK running
- Snoops and interrupts
allowed
Normal State
INIT#, BINIT#, INTR, NMI, SMI#,
RESET#, FSB interrupts
- Normal Execution
Snoop
Event
Occurs
Snoop
Event
Serviced
STPCLK#
Asserted
STPCLK#
De-asserted
STPCLK#
Asserted
STPCLK#
De-asserted
Extended HALT Snoop or
HALT Snoop State
- BCLK running
- Service Snoops to cahces
Stop Grant State
- BCLK running
- Snoops and interrupts
allowed
Snoop Event Occurs
Snoop Event Serviced
Stop Grant Snoop State
- BCLK running
- Service Snoops to cahces
SleepStateFigure
6.2.1
6.2.2
Normal State
This is the normal operating state for the processor.
HALT and Extended HALT Powerdown States
The processor supports the HALT or Extended HALT powerdown state. The Extended
HALT Powerdown must be enabled via the BIOS for the processor to remain within its
specification.
The Extended HALT state is a lower power state as compared to the Stop Grant State.
If Extended HALT is not enabled, the default Powerdown state entered will be HALT.
Refer to the sections below for details about the HALT and Extended HALT states.
6.2.2.1
HALT Powerdown State
HALT is a low power state entered when all the processor cores have executed the HALT
or MWAIT instructions. When one of the processor cores executes the HALT instruction,
that processor core is halted, however, the other processor continues normal operation.
The processor will transition to the Normal state upon the occurrence of SMI#, INIT#,
or LINT[1:0] (NMI, INTR). RESET# will cause the processor to immediately initialize
itself.
The return from a System Management Interrupt (SMI) handler can be to either
Normal Mode or the HALT Power Down state. See the Intel Architecture Software
Developer's Manual, Volume III: System Programmer's Guide for more information.
84
Datasheet
Features
The system can generate a STPCLK# while the processor is in the HALT Power Down
state. When the system deasserts the STPCLK# interrupt, the processor will return
execution to the HALT state.
While in HALT Power Down state, the processor will process bus snoops.
6.2.2.2
Extended HALT Powerdown State
Extended HALT is a low power state entered when all processor cores have executed
the HALT or MWAIT instructions and Extended HALT has been enabled via the BIOS.
When one of the processor cores executes the HALT instruction, that logical processor
is halted; however, the other processor continues normal operation. The Extended
HALT Powerdown must be enabled via the BIOS for the processor to remain within its
specification.
Not all processors are capable of supporting Extended HALT State. More details on
which processor frequencies will support this feature will be provided in future releases
of the Intel® Core™2 Extreme Quad-Core Processor QX6700 and Intel® Core™2 Quad
Processor Q6000 Sequence Specification Update when available.
The processor will automatically transition to a lower frequency and voltage operating
point before entering the Extended HALT state. Note that the processor FSB frequency
is not altered; only the internal core frequency is changed. When entering the low
power state, the processor will first switch to the lower bus ratio and then transition to
the lower VID.
While in Extended HALT state, the processor will process bus snoops.
The processor exits the Extended HALT state when a break event occurs. When the
processor exits the Extended HALT state, it will first transition the VID to the original
value and then change the bus ratio back to the original value.
6.2.3
Stop Grant State
When the STPCLK# signal is asserted, the Stop Grant state of the processor is entered
20 bus clocks after the response phase of the processor-issued Stop Grant
Acknowledge special bus cycle. The processor will issue two Stop Grant Acknowledge
special bus cycles, once for each die. Once the STPCLK# pin has been asserted, it may
only be deasserted once the processor is in the Stop Grant state. All processor cores
will enter the Stop Grant state once the STPCLK# pin is asserted. Additionally, all
processor cores must be in the Stop Grant state before the deassertion of STPCLK#.
Since the GTL+ signals receive power from the FSB, these signals should not be driven
(allowing the level to return to VTT) for minimum power drawn by the termination
resistors in this state. In addition, all other input signals on the FSB should be driven to
the inactive state.
RESET# will cause the processor to immediately initialize itself, but the processor will
stay in Stop Grant state. A transition back to the Normal state will occur with the de-
assertion of the STPCLK# signal.
A transition to the Grant Snoop state will occur when the processor detects a snoop on
the FSB (see Section 6.2.4).
While in the Stop Grant State, SMI#, INIT#, and LINT[1:0] will be latched by the
processor, and only serviced when the processor returns to the Normal State. Only one
occurrence of each event will be recognized upon return to the Normal state.
While in Stop Grant state, the processor will process a FSB snoop.
Datasheet
85
Features
6.2.4
Extended HALT Snoop or HALT Snoop State,
Stop Grant Snoop State
The Extended HALT Snoop State is used in conjunction with the new Extended HALT
state. If Extended HALT state is not enabled in the BIOS, the default Snoop State
entered will be the HALT Snoop State. Refer to the sections below for details on HALT
Snoop State, Grant Snoop State and Extended HALT Snoop State.
6.2.4.1
HALT Snoop State, Stop Grant Snoop State
The processor will respond to snoop transactions on the FSB while in Stop Grant state
or in HALT Power Down state. During a snoop transaction, the processor enters the
HALT Snoop State:Stop Grant Snoop state. The processor will stay in this state until the
snoop on the FSB has been serviced (whether by the processor or another agent on the
FSB). After the snoop is serviced, the processor will return to the Stop Grant state or
HALT Power Down state, as appropriate.
6.2.4.2
Extended HALT Snoop State
The Extended HALT Snoop State is the default Snoop State when the Extended HALT
state is enabled via the BIOS. The processor will remain in the lower bus ratio and VID
operating point of the Extended HALT state.
While in the Extended HALT Snoop State, snoops are handled the same way as in the
HALT Snoop State. After the snoop is serviced the processor will return to the Extended
HALT state.
§ §
86
Datasheet
Boxed Processor Specifications
7
Boxed Processor Specifications
The processor will also be offered as an Intel boxed processor. Intel boxed processors
are intended for system integrators who build systems from baseboards and standard
components. The boxed processor will be supplied with a cooling solution. This chapter
documents baseboard and system requirements for the cooling solution that will be
supplied with the boxed processor. This chapter is particularly important for OEMs that
manufacture baseboards for system integrators. Unless otherwise noted, all figures in
this chapter are dimensioned in millimeters and inches [in brackets]. Figure 22 shows a
mechanical representation of a boxed processor.
Note:
Drawings in this section reflect only the specifications on the Intel boxed processor
product. These dimensions should not be used as a generic keep-out zone for all
cooling solutions. It is the system designers’ responsibility to consider their proprietary
cooling solution when designing to the required keep-out zone on their system
platforms and chassis. Refer to the appropriate Thermal and Mechanical Design
Guidelines (see Section 1.2).
Figure 22.
Mechanical Representation of the Boxed Processor
NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.
Datasheet
87
Boxed Processor Specifications
7.1
Mechanical Specifications
7.1.1
Boxed Processor Cooling Solution Dimensions
This section documents the mechanical specifications of the boxed processor. The
boxed processor will be shipped with an unattached fan heatsink. Figure 22 shows a
mechanical representation of the boxed processor.
Clearance is required around the fan heatsink to ensure unimpeded airflow for proper
cooling. The physical space requirements and dimensions for the boxed processor with
assembled fan heatsink are shown in Figure 23 (Side View), and Figure 24 (Top View).
The airspace requirements for the boxed processor fan heatsink must also be
incorporated into new baseboard and system designs. Airspace requirements are
shown in Figure 28 and Figure 29. Note that some figures have centerlines shown
(marked with alphabetic designations) to clarify relative dimensioning.
Figure 23.
Space Requirements for the Boxed Processor (Side View)
95.0
[3.74]
81.3
[3.2]
10.0
25.0
[0.39]
[0.98]
Boxed Proc SideView
88
Datasheet
Boxed Processor Specifications
Figure 24.
Space Requirements for the Boxed Processor (Top View)
NOTES:
1. Diagram does not show the attached hardware for the clip design and is provided only as a
mechanical representation.
Figure 25.
Space Requirements for the Boxed Processor (Overall View)
Datasheet
89
Boxed Processor Specifications
7.1.2
7.1.3
Boxed Processor Fan Heatsink Weight
The boxed processor fan heatsink will not weigh more than 550 grams. Refer to
Chapter 5 and the appropriate Thermal and Mechanical Design Guidelines (see
Section 1.2) for details on the processor weight and heatsink requirements.
Boxed Processor Retention Mechanism and Heatsink
Attach Clip Assembly
The boxed processor thermal solution requires a heatsink attach clip assembly, to
secure the processor and fan heatsink in the baseboard socket. The boxed processor
will ship with the heatsink attach clip assembly.
7.2
Electrical Requirements
7.2.1
Fan Heatsink Power Supply
The boxed processor's fan heatsink requires a +12 V power supply. A fan power cable
will be shipped with the boxed processor to draw power from a power header on the
baseboard. The power cable connector and pinout are shown in Figure 26. Baseboards
must provide a matched power header to support the boxed processor. Table 32
contains specifications for the input and output signals at the fan heatsink connector.
The fan heatsink outputs a SENSE signal, which is an open- collector output that pulses
at a rate of 2 pulses per fan revolution. A baseboard pull-up resistor provides VOH to
match the system board-mounted fan speed monitor requirements, if applicable. Use of
the SENSE signal is optional. If the SENSE signal is not used, pin 3 of the connector
should be tied to GND.
The fan heatsink receives a PWM signal from the motherboard from the 4th pin of the
connector labeled as CONTROL.
The boxed processor's fanheat sink requires a constant +12 V supplied to pin 2 and
does not support variable voltage control or 3-pin PWM control.
The power header on the baseboard must be positioned to allow the fan heatsink power
cable to reach it. The power header identification and location should be documented in
the platform documentation, or on the system board itself. Figure 27 shows the
location of the fan power connector relative to the processor socket. The baseboard
power header should be positioned within 110 mm [4.33 inches] from the center of the
processor socket.
90
Datasheet
Boxed Processor Specifications
Figure 26.
Boxed Processor Fan Heatsink Power Cable Connector Description
Signal
Pin
Straight square pin, 4-pin terminal housing with
polarizing ribs and friction locking ramp.
1
2
3
4
GND
+12 V
0.100" pitch, 0.025" square pin width.
SENSE
CONTROL
Match with straight pin, friction lock header on
mainboard.
3 4
1 2
Table 32.
Fan Heatsink Power and Signal Specifications
Description
Min
Typ
Max
Unit
Notes
+12 V: 12 volt fan power supply
11.4
12
12.6
V
-
IC:
- Maximum fan steady-state current draw
- Average fan steady-state current draw
- Maximum fan start-up current draw
—
—
—
—
1.2
0.5
2.2
1.0
—
—
—
—
A
A
A
-
- Fan start-up current draw maximum
duration
Second
pulses per
fan
1
SENSE: SENSE frequency
—
2
—
revolution
2,
3
CONTROL
21
25
28
Hz
NOTES:
1. Baseboard should pull this pin up to 5 V with a resistor.
2. Open drain type, pulse width modulated.
3. Fan will have pull-up resistor to 4.75 V maximum of 5.25 V.
Datasheet
91
Boxed Processor Specifications
Figure 27.
Baseboard Power Header Placement Relative to Processor Socket
7.3
Thermal Specifications
This section describes the cooling requirements of the fan heatsink solution used by the
boxed processor.
7.3.1
Boxed Processor Cooling Requirements
The boxed processor may be directly cooled with a fan heatsink. However, meeting the
processor's temperature specification is also a function of the thermal design of the
entire system, and ultimately the responsibility of the system integrator. The processor
temperature specification is in Chapter 5. The boxed processor fan heatsink is able to
keep the processor temperature within the specifications (see Table 26) in chassis that
provide good thermal management. For the boxed processor fan heatsink to operate
properly, it is critical that the airflow provided to the fan heatsink is unimpeded. Airflow
of the fan heatsink is into the center and out of the sides of the fan heatsink. Airspace
is required around the fan to ensure that the airflow through the fan heatsink is not
blocked. Blocking the airflow to the fan heatsink reduces the cooling efficiency and
decreases fan life. Figure 28 and Figure 29 illustrate an acceptable airspace clearance
for the fan heatsink. The air temperature entering the fan should be kept below 39 ºC.
Again, meeting the processor's temperature specification is the responsibility of the
system integrator.
92
Datasheet
Boxed Processor Specifications
Figure 28.
Boxed Processor Fan Heatsink Airspace Keepout Requirements (Side 1 View)
Figure 29.
Boxed Processor Fan Heatsink Airspace Keepout Requirements (Side 2 View)
Datasheet
93
Boxed Processor Specifications
®
7.3.2
Fan Speed Control Operation (Intel Core™2 Extreme
processors only)
The boxed processor fan heatsink is designed to operate continuously at full speed to
allow maximum user control over fan speed. The fan speed can be controlled by
hardware and software from the motherboard. This is accomplished by varying the duty
cycle of the Control signal on the 4th pin (see Table 32). The motherboard must have a
4-pin fan header and must be designed with a fan speed controller with PWM output
and Digital Thermometer measurement capabilities. For more information on specific
motherboard requirements for 4-wire based fan speed control refer to the appropriate
Thermal and Mechanical Design Guidelines (see Section 1.2).
The Internal chassis temperature should be kept below 39 ºC. Meeting the processor's
temperature specification (see Chapter 5) is the responsibility of the system integrator.
The motherboard must supply a constant +12 V to the processor's power header to
ensure proper operation of the fan for the boxed processor. See Table 32 for specific
requirements.
®
7.3.3
Fan Speed Control Operation (Intel Core™2 Quad
processor)
If the boxed processor fan heatsink 4-pin connector is connected to a 3-pin
motherboard header it will operate as follows:
The boxed processor fan will operate at different speeds over a short range of
internal chassis temperatures. This allows the processor fan to operate at a lower
speed and noise level, while internal chassis temperatures are low. If internal
chassis temperature increases beyond a lower set point, the fan speed will rise
linearly with the internal temperature until the higher set point is reached. At that
point, the fan speed is at its maximum. As fan speed increases, so does fan noise
levels. Systems should be designed to provide adequate air around the boxed
processor fan heatsink that remains cooler then lower set point. These set points,
represented in Figure 30 and Table 33, can vary by a few degrees from fan
heatsink to fan heatsink. The internal chassis temperature should be kept below
38 ºC. Meeting the processor's temperature specification (see Chapter 5) is the
responsibility of the system integrator.
The motherboard must supply a constant +12 V to the processor's power header to
ensure proper operation of the variable speed fan for the boxed processor. Refer to
Table 32 for the specific requirements.
94
Datasheet
Boxed Processor Specifications
Figure 30.
Boxed Processor Fan Heatsink Set Points
Higher Set Point
Highest Noise Level
Increasing Fan
Speed & Noise
Lower Set Point
Lowest Noise Level
X
Y
Z
Internal Chassis Temperature (Degrees C)
Table 33.
Fan Heatsink Power and Signal Specifications
Boxed Processor Fan
Boxed Processor Fan Speed
Notes
Heatsink Set Point (ºC)
When the internal chassis temperature is below or equal to
this set point, the fan operates at its lowest speed.
Recommended maximum internal chassis temperature for
nominal operating environment.
1
X ≤ 30
When the internal chassis temperature is at this point, the
fan operates between its lowest and highest speeds.
Recommended maximum internal chassis temperature for
worst-case operating environment.
Y = 35
-
-
When the internal chassis temperature is above or equal to
this set point, the fan operates at its highest speed.
Z ≥ 39
NOTES:
1. Set point variance is approximately ± 1 °C from fan heatsink to fan heatsink.
If the boxed processor fan heatsink 4-pin connector is connected to a 4-pin
motherboard header and the motherboard is designed with a fan speed controller with
PWM output (CONTROL see Table 32) and remote thermal diode measurement
capability the boxed processor will operate as follows:
As processor power has increased the required thermal solutions have generated
increasingly more noise. Intel has added an option to the boxed processor that allows
system integrators to have a quieter system in the most common usage.
The 4th wire PWM solution provides better control over chassis acoustics. This is
achieved by more accurate measurement of processor die temperature through the
processor's Digital Thermal Sensors (DTS) and PECI. Fan RPM is modulated through the
use of an ASIC located on the motherboard that sends out a PWM control signal to the
4th pin of the connector labeled as CONTROL. The fan speed is based on actual
processor temperature instead of internal ambient chassis temperatures.
Datasheet
95
Boxed Processor Specifications
If the new 4-pin active fan heat sink solution is connected to an older 3-pin baseboard
processor fan header it will default back to a thermistor controlled mode, allowing
compatibility with existing 3-pin baseboard designs. Under thermistor controlled mode,
the fan RPM is automatically varied based on the Tinlet temperature measured by a
thermistor located at the fan inlet.
For more details on specific motherboard requirements for 4-wire based fan speed
control refer to the appropriate Thermal and Mechanical Design Guidelines (see
Section 1.2).
§ §
96
Datasheet
Debug Tools Specifications
8
Debug Tools Specifications
8.1
Logic Analyzer Interface (LAI)
Intel is working with two logic analyzer vendors to provide logic analyzer interfaces
(LAIs) for use in debugging systems. Tektronix and Agilent should be contacted to get
specific information about their logic analyzer interfaces. The following information is
general in nature. Specific information must be obtained from the logic analyzer
vendor.
Due to the complexity of systems, the LAI is critical in providing the ability to probe and
capture FSB signals. There are two sets of considerations to keep in mind when
designing a r system that can make use of an LAI: mechanical and electrical.
8.1.1
Mechanical Considerations
The LAI is installed between the processor socket and the processor. The LAI lands plug
into the processor socket, while the processor lands plug into a socket on the LAI.
Cabling that is part of the LAI egresses the system to allow an electrical connection
between the processor and a logic analyzer. The maximum volume occupied by the LAI,
known as the keepout volume, as well as the cable egress restrictions, should be
obtained from the logic analyzer vendor. System designers must make sure that the
keepout volume remains unobstructed inside the system. Note that it is possible that
the keepout volume reserved for the LAI may differ from the space normally occupied
by the processor’s heatsink. If this is the case, the logic analyzer vendor will provide a
cooling solution as part of the LAI.
8.1.2
Electrical Considerations
The LAI will also affect the electrical performance of the FSB; therefore, it is critical to
obtain electrical load models from each of the logic analyzers to be able to run system
level simulations to prove that their tool will work in the system. Contact the logic
analyzer vendor for electrical specifications and load models for the LAI solution it
provides.
§ §
Datasheet
97
Debug Tools Specifications
98
Datasheet
相关型号:
©2020 ICPDF网 联系我们和版权申明