IR2133J [INFINEON]
3-PHASE BRIDGE DRIVER; 3相桥式驱动器
| 型号： | IR2133J |
| 厂家： | 
Infineon |
| 描述： | 3-PHASE BRIDGE DRIVER |
| 文件： | 总12页 (文件大小：219K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Data Sheet No. PD60107 revU
) & (PbF)
&
IR2133/IR2135(J S
/
(
)
&
IR2233 IR2235 J S
3-PHASE BRIDGE DRIVER
Features
Product Summary
• Floating channel designed for bootstrap operation
Fully operational to +600V or+1200V
Tolerant to negative transient voltage
dV/dt immune
V
600V or 1200V max.
200 mA / 420 mA
10 - 20V or 12 - 20V
750/700 ns
OFFSET
I +/-
O
• Gate drive supply range from 10V/12V to 20V DC and
up to 25V for transient
• Undervoltage lockout for all channels
• Over-current shut down turns off all six drivers
• Independent 3 half-bridge drivers
• Matched propagation delay for all channels
• 2.5V logic compatible
V
OUT
t
(typ.)
on/off
Deadtime (typ.)
Packages
250 ns
• Outputs out of phase with inputs
• Also available LEAD-FREE
Description
The IR2133IR2135/IR2233IR2355 (J&S) are high voltage, high
speed power MOSFET and IGBT driver with three independent
high side and low side referenced output channels for 3-phase
applications. Proprietary HVIC technology enables ruggedized
monolithic construction. Logic inputs are compatible with CMOS
or LSTTL outputs, down to 2.5V logic. An independent opera-
28-Lead SOIC
28-Lead PDIP
44-Lead PLCC w/o 12 leads
tional amplifier provides an analog feedback of bridge current via an external current sense resistor. A current trip
function which terminates all six outputs can also be derived from this resistor. A shutdown function is available to
terminate all six outputs. An open drain FAULT signal is provided to indicate that an over-current or undervoltage
shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. The output drivers feature a high pulse
current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in
high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the
high side configuration which operates up to 600 volts or 1200 volts.
Typical Connection
(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only.
Please refer to our Application Notes and DesignTips for proper circuit board layout.
www.irf.com
1
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All volt-
age parameters are absolute voltages referenced to COM. The Thermal Resistance and Power Dissipation
ratings are measured under board mounted and still air conditions.
Symbol
Definition
Min.
Max.
Units
VB1,2,3
High side floating supply voltage
(IR2133/IR2135)
(IR2233/IR2235)
-0.3
-0.3
625
1225
VS1,2,3
High side floating supply offset voltage
VB1,2,3 - 25
VS1,2,3 - 0.3
-0.3
VB1,2,3 + 0.3
VB1,2,3 + 0.3
25
VHO1,2,3 High side floating output voltage
VCC
VSS
Fixed supply voltage
Logic ground
VCC - 25
-0.3
VCC + 0.3
VCC + 0.3
(VSS + 15) or
V
VLO1,2,3 Low side output voltage
VIN
Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR)
VSS - 0.3
(VCC + 0.3)
whichever is
lower
VIN,AMP Op amp input voltage (CA+ & CA-)
VOUT,AMP Op amp output voltage (CAO)
VSS - 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
50
VSS - 0.3
output voltage
VFLT
dVS/dt
PD
FAULT
VSS - 0.3
—
V/ns
W
Allowable offset supply voltage transient
Package power dissipation @ TA ≤ 25ºC (28 Lead PDIP)
(28 Lead SOIC)
—
1.5
—
1.6
(44 lead PLCC)
—
2.0
RthJA
Thermal resistance, junction to ambient (28 Lead PDIP)
(28 Lead SOIC)
—
83
ºC/W
ºC
—
78
(44 lead PLCC)
—
63
TJ
TS
TL
Junction temperature
—
125
Storage temperature
-55
—
150
Lead temperature (soldering, 10 seconds
300
Recommended Operating Conditions
The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the
recommended conditions. All voltage parameters are absolute voltages referenced to COM. The V offset rating is
S
tested with all supplies biased at 15V differential.
Symbol Parameter Definition
Min.
Max.
Units
VB1,2,3
VS1,2,3
High side floating supply voltage
VS1,2,3 + 10/12 VS1,2,3 + 20
High side floating supply offset voltage (IR2133/IR2135)
(IR2233/IR2235)
Note 1
Note 1
VS1,2,3
10 or 12
-5
600
1200
VB1,2,3
20
VHO1,2,3
VCC
High side floating output voltage
Fixed supply voltage
VSS
Low side driver return
5
V
VLO1,2,3
VIN
Low side output voltage
0
VCC
Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR)
Op amp input voltage (CA+ & CA-)
VSS
VSS + 5
VSS + 5
VSS + 5
VCC
VIN,AMP
VSS
VOUT,AMP Op amp output voltage (CAO)
output voltage
VSS
VFLT
FAULT
VSS
Note 1: Logic operational for V of COM - 5V to COM + 600V/1200V. Logic state held for V of COM -5V to COM -V . (Please refer to the Design Tip
BS
S
S
DT97-3 for more details).
Note 2: All input pins, op amp input and output pins are internally clamped with a 5.2V zener diode.
2
www.irf.com
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
Dynamic Electrical Characteristics
o
V
(V , V
) = 15V, V
= V
and C = 1000 pF unless otherwise specified.
, T = 25 C
L
BIAS CC BS1,2,3
S1,2,3
SS
A
Symbol
Definition
Min. Typ. Max. Units Test Conditions
t
t
t
t
t
t
t
Turn-on propagation delay
Turn-off propagation delay
Turn-on rise time
500
450
—
750 1000
on
off
r
VIN = 0 & 5V
VS1,2,3 = 0 to 600V
or 1200V
700
90
950
150
70
Turn-off fall time
—
40
f
SD to output shutdown propagation delay
ITRIP to output shutdown propagation delay
ITRIP blanking time
500
600
—
750 1000
850 1100
VIN,VSD = 0 & 5V
VIN,VITRIP = 0 & 5V
ITRIP = 1V
sd
itrip
bl
ns
400
650
310
—
900
—
t
t
t
ITRIP to FAULT propagation delay
Input filter time (HIN, LIN and SD)
FLT-CLR to FAULT clear time
400
—
VIN,VITRIP = 0 & 5V
VIN = 0 & 5V
flt
fil,in
fltclr
600
100
850 1100
V
IN,VITRIP = 0 & 5V
IN = 0 & 5V
DT
Deadtime, LS turn-off to HS turn-on &
HS turn-off to LS turn-on
250
400
V
SR+
SR-
Amplifier slew rate (positive)
Amplifier slew rate (negative)
5
2
10
—
—
V/µs
2.5
NOTE: For high side PWM, HIN pulse width must be ≥ 1µ sec
Static Electrical Characteristics
o
V
(V , V
) = 15V unless otherwise specified and T = 25 C. The V , V and I parameters are
BIAS
CC BS1,2,3
A
IN TH
IN
referenced to V and are applicable to all six channels (H
& L ). The VO and IO parameters are
S1,2,3
SS
S1,2,3
referenced to V and V
and are applicable to the respective output leads: H or L
O1,2,3 O1,2,3.
SS
S1,2,3
Symbol Definition
Min. Typ. Max. Units
Test Conditions
VIH
Logic “0” Input Voltage (OUT = LO)
Logic “1” Input Voltage (OUT = HI)
Logic “0” Fault Clear Input Voltage
Logic “1” Fault Clear Input Voltage
SD Input Positive Going Threshold
SD Input Negative Going Threshold
IITRIP Input Positive Going Threshold
IITRIP Input Negative Going Threshold
2.2
—
—
—
VIL
—
0.8
—
VFCLR,IH
VFCLR,IL
2.2
—
—
V
—
0.8
2.2
2.0
670
560
100
100
50
+
VSD,TH
1.6
1.4
470
360
—
1.9
1.7
570
460
—
-
VSD,TH
+
VIT,TH
VIT,TH
-
mV
µA
VOH
VOL
ILK
High Level Output Voltage, V
BIAS
- V
VIN = 0V, I = 0A
O
VIN = 5V, I = 0A
O
O
Low Level Output Voltage, V
—
—
O
Offset Supply Leakage Current (IR2133/IR2135)
(IR2233/IR2235)
—
—
VB1,2,3=VS1,2,3 = 600V
VB1,2,3=VS1,2,3 = 1200V
VIN = 0V or 5V
VIN = 0V or 5V
VIN = 0V
—
—
50
IQBS
IQCC
Quiescent V
Quiescent V
Supply Current
Supply Current
—
50
4
100
8
BS
—
mA
CC
+
IIN
Logic “1” Input Bias Current (OUT = HI)
Logic “0” Input Bias Current (OUT = LO)
“High” Shutdown Bias Current
“Low” Shutdown Bias Current
“High” IITRIP Bias Current
—
200
100
30
—
350
250
100
100
100
100
-
IIN
—
µA
VIN = 5V
+
ISD
—
SD = 5V
ISD
-
—
nA
µA
nA
SD = 0V
IITRIP
+
—
30
—
IITRIP = 5V
-
IITRIP
“Low” IITRIP Bias Current
—
IITRIP = 0V
www.irf.com
3
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
Static Electrical Characteristics — Continued
o
VBIAS (VCC, VBS1,2,3) = 15V and T = 25 C unless otherwise specified. The VIN, VTH and IIN parameters are
A
referenced to VSS and are applicable to all six channels (HS1,2,3 & LS1,2,3). The VO and IO parameters are
referenced to VSS and VS0,1,2,3 and are applicable to the respective output leads: HO or LO.
Parameter Definition
Min. Typ. Max. Units Test Conditions
Symbol
IFLTCLR+ “High” Fault Clear Input Bias Current
IFLTCLR “Low” Fault Clear Input Bias Current
Supply Undervoltage Positive Going Threshold
—
—
200
100
350
250
FLT-CLR = 0V
FLT-CLR = 5V
µA
-
VBSUV
+
VBS
(for IR2133/IR2233) 7.6
8.6
9.6
(for IR2135/IR2235) 9.2 10.4 11.6
Supply Undervoltage Negative Going Threshold
VBSUV
-
VBS
(for IR2133/IR2233) 7.2
(for IR2135/IR2235) 8.3
8.2
9.4
9.2
10.5
VBSUVH VBS Supply Undervoltage Lockout Hysteresis
(for IR2133/IR2233)
—
—
0.4
1
—
—
(for IR2135/IR2235)
VCCUV
+
Supply Undervoltage Positive Going Threshold
VCC
V
(for IR2133/IR2233) 7.6
(for IR2135/IR2235) 9.2
8.6
9.6
10.4 11.6
VCCUV
-
Supply Undervoltage Negative Going Threshold
(for IR2133/IR2233) 7.2
VCC
8.2
9.4
9.2
(for IR2135/IR2235) 8.3
10.5
VCCUVH VCC Supply Undervoltage Lockout Hysteresis
(for IR2133/IR2233)
—
—
0.4
1
—
—
(for IR2135/IR2235)
Ω
Ron,FLT FAULT- Low On Resistance
—
70
250
100
—
IO
+
VOUT = 0V, VIN = 0V
Output High Short Circuit Pulsed Current
190
µ
PW ≤ 10
s
mA
IO
-
= 15V, VIN = 5V
Output Low Short Circuit Pulsed Current
380
500
—
VOUT
PW ≤ 10
µ
s
VOS
Amplifier Input Offset Voltage
Amplifier Input Bias Current
—
—
50
50
0
30
4
mV CA+=0.2V, CA-=CAO
IIN,AMP
—
70
70
nA
CA+ = CA- = 2.5V
CMRR Amplifier Common Mode Rejection Ratio
PSRR Amplifier Power Supply Rejection Ratio
—
—
CA+ = 0.1V & 5V, CA- = CAO
CA+=0.2V, CA-=CAO
VCC = 10V & 20V
dB
VOH,Amp Amplifier High Level Output Voltage
VOL,Amp Amplifier Low Level Output Voltage
ISRC,Amp Amplifier Output Source Current
ISNK,Amp Amplifier Output Sink Current
5
5.2
—
7
5.4
20
—
—
—
—
V
CA+ = 1V, CA- = 0V
—
4
mV CA+ = 0V, CA- = 1V
CA+ = 1V, CA- = 0V, CAO = 4V
CA+ = 0V, CA- = 1V, CAO = 2V
0.5
—
—
1
mA
IO
+
Amplifier Output High Short Circuit Current
Amplifier Output Low Short Circuit Current
10
4
CA+ = 5V, CA- = 0V, CAO = 0V
,Amp
IO-,Amp
CA+ = 0V, CA- = 5V, CAO = 5V
4
www.irf.com
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
Functional Block Diagram
Lead Definitions
Symbol
Lead Description
HIN1,2,3
LIN1,2,3
FAULT
VCC
Logic inputs for high side gate driver outputs (HO1,2,3), out of phase.
Logic inputs for low side gate driver outputs (LO1,2,3), out of phase.
Indicates over-current or undervoltage lockout (low side) has occurred, negative logic.
Logic and low side fixed supply.
Input for over-current shut down.
Logic input for fault clear, negative logic.
Logic input for shut down.
ITRIP
FLT-CLR
SD
CAO
Output of current amplifier.
CA-
Negative input of current amplifier.
Positive input of current amplifier.
Logic ground.
CA+
VSS
COM
Low side return.
VB1,2,3
HO1,2,3
VS1,2,3
LO1,2,3
High side floating supplies.
High side gate drive outputs.
High side floating supply returns.
Low side gate drive outputs
www.irf.com
5
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
Lead Assignments
ITRIP
FLT-CLR
CAO
CA-
FAULT
LIN3
LIN2
LIN1
HIN3
HIN2
HIN1
VCC
VB1
ITRIP
FLT-CLR
CAO
CA-
FAULT
LIN3
LIN2
LIN1
HIN3
HIN2
HIN1
VCC
VB1
CA+
SD
CA+
SD
VSS
COM
LO3
VSS
COM
LO3
LO2
HO1
VS1
LO2
HO1
VS1
LO1
LO1
VS3
VB2
VS3
VB2
HO3
VB3
HO2
VS2
HO3
VB3
HO2
VS2
28 Lead DIP
44 Lead PLCC w/o 12 Leads
28 Lead SOIC (Wide Body)
IR2133J
IR2135J
IR2233J
IR2235J
IR2133S
IR2135S
IR2233S
IR2235S
IR2133
IR2135
IR2233
IR2235
Part Number
HIN1,2,3
LIN1,2,3
ITRIP
SD
FLT-CLR
FAULT
HO1,2,3
LO1,2,3
Figure 1. Input/Output Timing Diagram
6
www.irf.com
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
HIN
LIN
50%
50%
t
t
t
t
f
on
off
r
90%
90%
HO
LO
10%
10%
Figure 2. Switching Time Waveform Definitions
HIN
50%
50%
LIN
LO
50%
50%
HO
DT
DT
Figure 3. Deadtime Waveform Definitions
FLT-CLR
50%
50%
ITRIP
FAULT
50%
50%
Any Output
50%
t
t
fltclr
flt
t
itrip
Figure 4. Overcurrent Shutdown Waveform
www.irf.com
7
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
tin,fil
tin,fil
U
HIN/LIN
on
on off
low
on off
high
off
HO/LO
Figure 4.5 Input Filter Function
50%
SD
t
sd
90%
HO
LO
Figure 5. Shutdown Waveform Definitions
120
110
100
90
120
110
100
90
80
80
70
60
480
480V
70
320V
160
60
50
40
320V
160V
50
40
30
20
0V
0V
30
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
1E+4
1E+5
Frequency (Hz)
Frequency (Hz)
Figure 8. IR2133J Junction Temperature vs
Frequency Driving (IRGPC30KD2) Rgate = 5.1Ω @
Figure 7. IR2133J Junction Temperature vs
Frequency Driving (IRGPC20KD2) Rgate = 5.1Ω @
Vcc = 15V
Vcc = 15V
8
www.irf.com
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
120
110
150
140
130
120
480V
320V
100
90
80
70
60
50
40
480V
110
100
90
320V
80
70
60
50
40
30
20
160V
0V
160V
0V
30
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
1E+4
1E+5
Frequency (Hz)
Frequency (Hz)
Figure 10. IR2133J Junction Temperature vs
Frequency Driving (IRGPC50KD2) Rgate = 5.1Ω @
Vcc = 15V
Figure 9. IR2133J Junction Temperature vs
Frequency Driving (IRGPC40KD2) Rgate = 5.1Ω @
Vcc = 15V
900V
900V
1
120
120
1
110
110
100
500V
1
100
500
90
80
90
80
70
60
50
300V
0V
70
60
50
40
300
0V
40
30
20
30
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
1E+4
1E+5
Frequency (Hz)
Frequency (Hz)
Figure 11. IR2233J Junction Temperature vs
Figure 12. IR2233J Junction Temperature vs
Frequency Driving (IRG4PH30KD) Rgate = 20Ω @
Frequency Driving (IRG4PH40KD) Rgate = 15Ω @
Vcc = 15V
Vcc = 15V
www.irf.com
9
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
300V
900V 500V
900V 500V
300V
120
110
120
110
100
90
100
90
80
70
60
50
80
0V
70
60
50
0V
40
40
30
30
20
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
1E+4
1E+5
Frequency (Hz)
Figure 14. IR2233J Junction Temperature vs
Figure 13. IR2233J Junction Temperature vs
Frequency Driving (IRG4ZH71KD) Rgate = 5Ω @
Frequency Driving (IRG4PH50KD) Rgate = 10Ω @
Vcc = 15V
Vcc = 15V
Package Dimensions
01-6011
01-3024 02 (MS-011AB)
28-Lead PDIP (wide body)
10
www.irf.com
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
NOTES
01-6013
01-3040 02 (MS-013AE)
28-Lead SOIC (wide body)
01-6009 00
01-3004 02(mod.) (MS-018AC)
44-Lead PLCC w/o 12 leads
www.irf.com
11
/
)&(PbF)
&
IR2133/IR2135/IR2233 IR2235(J S
LEADFREE PART MARKING INFORMATION
Part number
IRxxxxxx
Date code
IR logo
YWW?
?XXXX
Pin 1
Identifier
Lot Code
(Prod mode - 4 digit SPN code)
?
MARKING CODE
P
Lead Free Released
Non-Lead Free
Released
Assembly site code
Per SCOP 200-002
ORDER INFORMATION
Basic Part (Non-Lead Free)
Leadfree Part
28-Lead PDIP IR2133 order IR2133
28-Lead SOIC IR2133S order IR2133S
28-Lead PDIP IR2135 order IR2135
28-Lead SOIC IR2135S order IR2135S
28-Lead PDIP IR2233 order IR2233
28-Lead SOIC IR2233S order IR2233S
28-Lead PDIP IR2235 order IR2235
28-Lead SOIC IR2235S order IR2235S
44-Lead PLCC IR2133J order IR2133J
44-Lead PLCC IR2135J order IR2135J
44-Lead PLCC IR2233J order IR2233J
44-Lead PLCC IR2235J order IR2235J
28-Lead PDIP IR2133 order IR2133PbF
28-Lead SOIC IR2133S order IR2133SPbF
28-Lead PDIP IR2135 order IR2135PbF
28-Lead SOIC IR2135S order IR2135SPbF
28-Lead PDIP IR2233 Not available at this time
28-Lead SOIC IR2233S Not available at this time
28-Lead PDIP IR2235 Not available at this time
28-Lead SOIC IR2235S Not available at this time
44-Lead PLCC IR2133J order IR2133JPbF
44-Lead PLCC IR2135J order IR2135JPbF
44-Lead PLCC IR2233J Not available at this time
44-Lead PLCC IR2235J Not available at this time
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105
This product has been qualified per industrial level
Data and specifications subject to change without notice. 4/12/2004
12
www.irf.com
相关型号：
IR2133SPBF
Half Bridge Based MOSFET Driver, 0.5A, CMOS, PDSO28, LEAD FREE, MS-013AE, SOIC-28
INFINEON
IR2135JPBF
Half Bridge Based MOSFET Driver, 0.5A, CMOS, PQCC32, LEAD FREE, PLASTIC, MS-018AC, LCC-44/32
INFINEON
©2020 ICPDF网 联系我们和版权申明