IR2133PBF [INFINEON]
3-PHASE BRIDGE DRIVER; 3相桥式驱动器型号: | IR2133PBF |
厂家: | Infineon |
描述: | 3-PHASE BRIDGE DRIVER |
文件: | 总27页 (文件大小:433K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet No. PD60107 revX
)&(PbF)
&
IR2133/IR2135(J S
/
(
)&(PbF)
&
IR2233 IR2235 J S
3-PHASE BRIDGE DRIVER
Features
Product Summary
• Floating channel designed for bootstrap operation
Fully operational to +600V or+1200V
Tolerant to negative transient voltage
dV/dt immune
V
600V or 1200V max.
200 mA / 420 mA
10 - 20V or 12 - 20V
750/700 ns
OFFSET
I +/-
O
• Gate drive supply range from 10V/12V to 20V DC and
up to 25V for transient
V
OUT
• Undervoltage lockout for all channels
• Over-current shut down turns off all six drivers
• Independent 3 half-bridge drivers
• Matched propagation delay for all channels
• 2.5V logic compatible
t
(typ.)
on/off
Deadtime (typ.)
Packages
250 ns
• Outputs out of phase with inputs
• All parts are also available LEAD-FREE
Description
The IR2133IR2135/IR2233IR2355 (J&S) are high voltage, high speed
power MOSFET and IGBT driver with three independent high side and
low side referenced output channels for 3-phase applications. Propri-
etary HVIC technology enables ruggedized monolithic construction.
Logic inputs are compatible with CMOS or LSTTL outputs, down to
2.5V logic. An independent operational amplifier provides an analog
feedback of bridge current via an external current sense resistor. A
current trip function which terminates all six outputs can also be de-
28-Lead SOIC
28-Lead PDIP
44-Lead PLCC w/o 12 leads
rived from this resistor. A shutdown function is available to terminate all six outputs. An open drain FAULT signal is provided to
indicate that an over-current or undervoltage shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. The
output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are
matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or
IGBTs in the high side configuration which operates up to 600 volts or 1200 volts.
Typical Connection
(Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only.
Please refer to our Application Notes and DesignTips for proper circuit board layout.
www.irf.com
1
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All volt-
age parameters are absolute voltages referenced to COM. The Thermal Resistance and Power Dissipation
ratings are measured under board mounted and still air conditions.
Symbol Definition
VB1,2,3 High side floating supply voltage
Min.
Max.
Units
(IR2133/IR2135)
(IR2233/IR2235)
High side floating supply offset voltage
VHO1,2,3 High side floating output voltage
VCC Fixed supply voltage
VSS Logic ground
VLO1,2,3 Low side output voltage
VIN Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR)
-0.3
-0.3
625
1225
VS1,2,3
VB1,2,3 - 25
VS1,2,3 - 0.3
-0.3
VB1,2,3 + 0.3
VB1,2,3 + 0.3
25
VCC - 25
-0.3
VCC + 0.3
VCC + 0.3
(VSS + 15) or
V
VSS - 0.3
(VCC + 0.3)
whichever is
lower
VIN,AMP Op amp input voltage (CA+ & CA-)
VOUT,AMP Op amp output voltage (CAO)
VSS - 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
50
VSS - 0.3
output voltage
VFLT
dVS/dt
PD
FAULT
VSS - 0.3
—
V/ns
W
Allowable offset supply voltage transient
Package power dissipation @ TA ≤ 25ºC (28 Lead PDIP)
(28 Lead SOIC)
—
1.5
—
1.6
(44 lead PLCC)
—
2.0
RthJA
Thermal resistance, junction to ambient (28 Lead PDIP)
(28 Lead SOIC)
—
83
ºC/W
ºC
—
78
(44 lead PLCC)
—
63
TJ
TS
TL
Junction temperature
—
125
Storage temperature
-55
—
150
Lead temperature (soldering, 10 seconds
300
Recommended Operating Conditions
The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the
recommended conditions. All voltage parameters are absolute voltages referenced to COM. The V offset rating is
S
tested with all supplies biased at 15V differential.
Symbol Parameter Definition
Min.
Max.
Units
VB1,2,3
VS1,2,3
High side floating supply voltage
VS1,2,3 + 10/12 VS1,2,3 + 20
High side floating supply offset voltage (IR2133/IR2135)
(IR2233/IR2235)
Note 1
Note 1
VS1,2,3
10 or 12
-5
600
1200
VB1,2,3
20
VHO1,2,3
VCC
High side floating output voltage
Fixed supply voltage
VSS
Low side driver return
5
V
VLO1,2,3
VIN
Low side output voltage
0
VCC
Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR)
Op amp input voltage (CA+ & CA-)
VSS
VSS + 5
VSS + 5
VSS + 5
VCC
VIN,AMP
VSS
VOUT,AMP Op amp output voltage (CAO)
output voltage
VSS
VFLT
FAULT
VSS
Note 1: Logic operational for V of COM - 5V to COM + 600V/1200V. Logic state held for V of COM -5V to COM -V . (Please refer to the Design Tip
S S BS
DT97-3 for more details).
Note 2: All input pins, op amp input and output pins are internally clamped with a 5.2V zener diode.
2
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
Dynamic Electrical Characteristics
o
= V , T = 25 C and C = 1000 pF unless otherwise specified.
S1,2,3 SS A L
V (V , V
BIAS CC BS1,2,3
) = 15V, V
Symbol
Definition
Min. Typ. Max. Units Test Conditions
500 750 1000
t
on
Turn-on propagation delay
Turn-off propagation delay
Turn-on rise time
VIN = 0 & 5V
VS1,2,3 = 0 to 600V
or 1200V
t
450
—
700
90
950
150
70
off
t
r
t
f
Turn-off fall time
—
40
t
SD to output shutdown propagation delay
ITRIP to output shutdown propagation delay
ITRIP blanking time
500
600
—
750 1000
850 1100
V
IN,VSD = 0 & 5V
sd
t
VIN,VITRIP = 0 & 5V
itrip
ns
t
400
650
310
—
900
—
ITRIP = 1V
bl
t
ITRIP to FAULT propagation delay
Input filter time (HIN, LIN and SD)
400
—
VIN,VITRIP = 0 & 5V
flt
t
VIN = 0 & 5V
fil,in
t
FLT-CLR to FAULT clear time
600
100
850 1100
VIN,VITRIP = 0 & 5V
VIN = 0 & 5V
fltclr
DT
Deadtime, LS turn-off to HS turn-on &
HS turn-off to LS turn-on
250
400
SR+
SR-
Amplifier slew rate (positive)
Amplifier slew rate (negative)
5
2
10
—
—
V/µs
2.5
NOTE: For high side PWM, HIN pulse width must be ≥ 1µ sec
Static Electrical Characteristics
o
) = 15V unless otherwise specified and T = 25 C. All static parameters other than IO and VO
V (V , V
BIAS CC BS1,2,3
A
are referenced to V and are applicable to all six channels (H
SS
& L ). The VO and IO parameters are
S1,2,3
S1,2,3
referenced to COM and V
and are applicable to the respective output leads: H or L
O1,2,3 O1,2,3.
S1,2,3
Symbol Definition
Min. Typ. Max. Units
Test Conditions
VIH
Logic “0” Input Voltage (OUT = LO)
Logic “1” Input Voltage (OUT = HI)
Logic “0” Fault Clear Input Voltage
Logic “1” Fault Clear Input Voltage
SD Input Positive Going Threshold
SD Input Negative Going Threshold
IITRIP Input Positive Going Threshold
IITRIP Input Negative Going Threshold
2.2
—
—
—
VIL
—
0.8
—
VFCLR,IH
VFCLR,IL
VSD,TH
VSD,TH
VIT,TH
2.2
—
—
V
—
0.8
2.2
2.0
670
560
100
100
50
+
1.6
1.4
470
360
—
1.9
1.7
570
460
—
-
+
VIT,TH
VOH
VOL
ILK
-
mV
µA
High Level Output Voltage, V
BIAS
- V
VIN = 0V, I = 0A
O
O
Low Level Output Voltage, V
—
—
VIN = 5V, I = 0A
O
O
Offset Supply Leakage Current (IR2133/IR2135)
(IR2233/IR2235)
—
—
VB1,2,3=VS1,2,3 = 600V
VB1,2,3=VS1,2,3 = 1200V
VIN = 0V or 5V
VIN = 0V or 5V
VIN = 0V
—
—
50
IQBS
IQCC
IIN
IIN
ISD
ISD
IITRIP
IITRIP
Quiescent V
BS
Supply Current
Supply Current
—
50
4
100
8
Quiescent V
CC
—
mA
+
Logic “1” Input Bias Current (OUT = HI)
Logic “0” Input Bias Current (OUT = LO)
“High” Shutdown Bias Current
“Low” Shutdown Bias Current
“High” IITRIP Bias Current
—
200
100
30
—
350
250
100
100
100
100
-
µA
—
VIN = 5V
+
—
SD = 5V
-
—
nA
µA
nA
SD = 0V
+
—
30
—
IITRIP = 5V
-
“Low” IITRIP Bias Current
—
IITRIP = 0V
www.irf.com
3
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
Static Electrical Characteristics — Continued
o
) = 15V unless otherwise specified and T = 25 C. All static parameters other than IO and VO
V (V , V
BIAS CC BS1,2,3
A
are referenced to V and are applicable to all six channels (H
SS
& L ). The VO and IO parameters are
S1,2,3
S1,2,3
referenced to COM and V
and are applicable to the respective output leads: H or L
O1,2,3 O1,2,3.
S1,2,3
Parameter Definition
Min. Typ. Max. Units Test Conditions
Symbol
IFLTCLR+ “High” Fault Clear Input Bias Current
IFLTCLR “Low” Fault Clear Input Bias Current
VBSUV Supply Undervoltage Positive Going Threshold
—
—
200
100
350
250
FLT-CLR = 0V
FLT-CLR = 5V
µA
-
+
VBS
(for IR2133/IR2233) 7.6
8.6
9.6
(for IR2135/IR2235) 9.2 10.4 11.6
Supply Undervoltage Negative Going Threshold
VBSUV
-
VBS
(for IR2133/IR2233) 7.2
(for IR2135/IR2235) 8.3
8.2
9.4
9.2
10.5
VBSUVH VBS Supply Undervoltage Lockout Hysteresis
(for IR2133/IR2233)
—
—
0.4
1
—
—
(for IR2135/IR2235)
VCCUV
+
Supply Undervoltage Positive Going Threshold
V
VCC
(for IR2133/IR2233) 7.6
(for IR2135/IR2235) 9.2
8.6
9.6
10.4 11.6
VCCUV
-
Supply Undervoltage Negative Going Threshold
(for IR2133/IR2233) 7.2
VCC
8.2
9.4
9.2
(for IR2135/IR2235) 8.3
10.5
VCCUVH VCC Supply Undervoltage Lockout Hysteresis
(for IR2133/IR2233)
—
—
0.4
1
—
—
(for IR2135/IR2235)
Ω
Ron,FLT FAULT- Low On Resistance
—
70
250
100
—
IO+
VOUT = 0V, VIN = 0V
Output High Short Circuit Pulsed Current
200
µ
PW ≤ 10
s
mA
IO-
= 15V, VIN = 5V
Output Low Short Circuit Pulsed Current
420
500
—
VOUT
PW ≤ 10
µ
s
VOS
Amplifier Input Offset Voltage
Amplifier Input Bias Current
—
—
50
50
0
30
4
mV CA+=0.2V, CA-=CAO
IIN,AMP
—
70
70
nA
CA+ = CA- = 2.5V
CMRR Amplifier Common Mode Rejection Ratio
PSRR Amplifier Power Supply Rejection Ratio
—
—
CA+ = 0.1V & 5V, CA- = CAO
CA+=0.2V, CA-=CAO
VCC = 10V & 20V
dB
VOH,Amp Amplifier High Level Output Voltage
VOL,Amp Amplifier Low Level Output Voltage
ISRC,Amp Amplifier Output Source Current
ISNK,Amp Amplifier Output Sink Current
5
5.2
—
7
5.4
20
—
—
—
—
V
CA+ = 1V, CA- = 0V
—
4
mV CA+ = 0V, CA- = 1V
CA+ = 1V, CA- = 0V, CAO = 4V
CA+ = 0V, CA- = 1V, CAO = 2V
0.5
—
—
1
mA
IO+
Amplifier Output High Short Circuit Current
Amplifier Output Low Short Circuit Current
10
4
CA+ = 5V, CA- = 0V, CAO = 0V
,Amp
IO-,Amp
CA+ = 0V, CA- = 5V, CAO = 5V
4
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
Functional Block Diagram
Lead Definitions
Symbol
Lead Description
HIN1,2,3
LIN1,2,3
FAULT
VCC
Logic inputs for high side gate driver outputs (HO1,2,3), out of phase.
Logic inputs for low side gate driver outputs (LO1,2,3), out of phase.
Indicates over-current or undervoltage lockout (low side) has occurred, negative logic.
Logic and low side fixed supply.
Input for over-current shut down.
Logic input for fault clear, negative logic.
Logic input for shut down.
ITRIP
FLT-CLR
SD
CAO
Output of current amplifier.
CA-
Negative input of current amplifier.
Positive input of current amplifier.
Logic ground.
CA+
VSS
COM
Low side return.
VB1,2,3
HO1,2,3
VS1,2,3
LO1,2,3
High side floating supplies.
High side gate drive outputs.
High side floating supply returns.
Low side gate drive outputs
www.irf.com
5
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
Lead Assignments
ITRIP
FLT-CLR
CAO
CA-
FAULT
LIN3
LIN2
LIN1
HIN3
HIN2
HIN1
VCC
VB1
ITRIP
FLT-CLR
CAO
CA-
FAULT
LIN3
LIN2
LIN1
HIN3
HIN2
HIN1
VCC
VB1
CA+
SD
CA+
SD
VSS
COM
LO3
VSS
COM
LO3
LO2
HO1
VS1
LO2
HO1
VS1
LO1
LO1
VS3
VB2
VS3
VB2
HO3
VB3
HO2
VS2
HO3
VB3
HO2
VS2
28 Lead DIP
44 Lead PLCC w/o 12 Leads
28 Lead SOIC (Wide Body)
IR2133J
IR2135J
IR2233J
IR2235J
IR2133
IR2135
IR2133S
IR2135S
IR2233S
IR2235S
Part Number
HIN1,2,3
LIN1,2,3
ITRIP
SD
FLT-CLR
FAULT
HO1,2,3
LO1,2,3
Figure 1. Input/Output Timing Diagram
6
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
HIN
LIN
50%
50%
50%
50%
t
LIN
t
t
t
f
on
off
r
LO
90%
90%
50%
50%
HO
HO
LO
10%
10%
DT
DT
Figure 2. Switching Time Waveform Definitions
Figure 3. Deadtime Waveform Definitions
FLT-CLR
50%
50%
ITRIP
FAULT
50%
50%
Any Output
50%
t
t
fltclr
flt
t
itrip
Figure 4. Overcurrent Shutdown Waveform
tin,fil
tin,fil
U
50%
SD
HIN/LIN
on
on off
low
on off
high
off
t
sd
90%
HO
LO
HO/LO
Figure 4.5. Input Filter Function
Figure 5. Shutdown Waveform Definitions
www.irf.com
7
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
1500
1200
1500
1200
Max.
Max.
Typ.
900
900
Typ.
Min.
600
600
Min.
300
0
300
0
-50 -25
0
25
Temperature (oC)
Figure 6A. Turn-On Time vs. Temperature
50
75 100 125
10
12.5
15
17.5
20
Supply Voltage (V)
Figure 6B. Turn-On Time vs. Voltage
1500
1500
1200
900
600
300
0
1200
900
600
300
0
Max.
Max.
Typ.
Typ.
Min.
Min.
-50 -25
0
25
50
75 100 125
2.5
3
3.5
Input Voltage (V)
Figure 6C. Turn-On Time vs. Input Voltage
4
4.5
5
Temperature (oC)
Figure 7A. Turn-Off Time vs. Temperature
1500
1500
1200
900
600
300
0
1200
900
600
300
0
Max.
Typ.
Max.
Typ.
Min.
Min.
2.5
3
3.5
4
4.5
5
10
12.5
Supply Voltage (V)
Figure 7B. Turn-Off Time vs. Voltage
15
17.5
20
Input Voltage (V)
Figure 7C. Turn-Off Time vs. Input
8
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
250
200
150
100
50
250
200
Max.
150
Max.
Typ.
Typ.
100
50
0
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Temperature (oC)
Supply Voltage (V)
Fiure 8A. Turn-On Rise Time vs.Temperature
Fiure 8B. Turn-On Rise Time vs.Voltage
150
120
90
150
120
90
60
30
0
Max.
Typ.
Max.
60
Typ.
30
0
10
12.5
Supply Voltage (V)
Figure 9B. Turn-Off Fall Time vs. Voltage
15
17.5
20
-50 -25
0
25
50
75
100 125
Temperature (oC)
Figure 9A. Turn-Off Fall Time vs. Temperature
1500
1200
1500
1200
900
600
300
0
Max.
Typ.
Min.
Max.
900
Typ.
600
Min.
300
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Supply Voltage (V)
Temperature (oC)
Figure 10A. SDto Output shutdown Time
vs. Temperature
Figure 10B. SD to Output shutdown Time
vs. Voltage
www.irf.com
9
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
1500
1200
1500
1200
Max.
900
900
Max.
Typ.
Typ.
600
600
Min.
Min.
300
300
0
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Supply Voltage (V)
Temperature (oC)
_____
_____
Figure 11B. ITRIP to FAULT Time
vs. Voltage
Figure 11A. ITRIP to FAULT Time
vs. Temperature
1800
1500
1200
900
1800
1500
1200
900
Max.
Typ.
Min.
Max.
Typ.
Min.
600
600
300
300
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Supply Voltage (V)
Temperature (oC)
Figure 12B. ITRIP to output shutdown Time
vs. Voltage
Figure 12A. ITRIP to output shutdown Time
vs. Temperature
1800
1800
1500
1200
900
1500
1200
900
Max.
Max.
Typ.
Min.
Typ.
Min.
600
600
300
300
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Supply Voltage (V)
________ ______
Temperature (oC)
________ ______
Figure 13A. FLT-CLRto FAULT clear Time
vs. Temperature
Figure 13B. FLT-CLR to FAULT clear Time
vs. Voltage
10
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
750
600
450
300
150
0
750
600
Max.
450
Max.
Typ.
Typ.
300
Min.
150
Min.
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75
100 125
Supply Voltage (V)
Temperature (oC)
Figure 14B. Deadtime vs. Voltage
Figure 14A. Deadtime vs. Temperature
20
16
12
8
20
16
12
8
Typ.
Min.
Typ.
Min.
4
4
0
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75
100 125
Supply Voltage (V)
Temperature (oC)
Figure 15A. Amplifier slew rate (+)
vs. Temperature
Figure 15B. Amplifier slew rate (+)
vs. Voltage
5
4
3
2
1
0
5
4
3
2
1
Typ.
Min.
Typ.
Min.
10
12.5
15
17.5
20
-50
-25
0
25
50
75
100 125
Temperature (oC)
Supply Voltage (V)
Figure 16B. Amplifier slew rate (-)
vs. Voltage
Figure 16A. Amplifier slew rate (-)
vs. Temperature
www.irf.com
11
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
6
5
4
6
5
4
3
3
Min.
Min.
2
2
1
1
10
12.5
15
17.5
20
-50
-25
0
25
50
75
100 125
Temperature (oC)
Supply Voltage (V)
Figure 17B. Logic "0" Input Voltage (OUT=LO),
Fault Clear Voltage vs. Voltage
Figure 17A. Logic "0" Input Voltage (OUT=LO),
Fault Clear Voltage vs. Temperature
5
4
3
2
5
4
3
2
Max.
Max.
1
1
0
0
-50 -25
0
25
50
75
100 125
10
12.5
15
17.5
20
Temperatre (oC)
Supply Voltage (V)
Figure 18A. Logic "1" Input (OUT=HI), Fault
Clear Input Voltage vs. Temperature
Figure 18B. Logic "1" Input (OUT=HI), Fault
Clear Input Voltage vs. Voltage
3.0
3.0
2.5
2.5
Max.
Max.
Typ.
Typ.
2.0
2.0
Min.
Min.
1.5
1.5
1.0
1.0
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperatre (oC)
Supply Voltage (V)
Figure 21A. SDInput TH(+) vs.
Temperature
Figure 21B. SD Input TH(+) vs. Voltage
12
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
3.0
2.5
2.0
1.5
1.0
3.0
2.5
Max.
Max.
Typ.
Min.
2.0
Typ.
Min.
1.5
1.0
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperatre (oC)
Supply Voltage (V)
Figure 22A. SDInput TH(-) vs. Temperature
Figure 22B. SD Input TH(-) vs. Voltage
1000
1000
800
600
400
200
800
600
400
200
Max.
Typ.
Min.
Max.
Typ.
Min.
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 23A. IITRIP Input TH(+) vs. Temperature
Figure 23B. IITRIP Input TH(+) vs. Voltage
900
900
700
500
300
100
700
500
300
100
Max.
Typ.
Min.
Max.
Typ.
Min.
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 24A. IITRIP Input TH(-) vs.Temperature
Figure 24B. IITRIP Input TH(-) vs. Voltage
www.irf.com
13
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
0.5
0.4
0.3
0.2
0.5
0.4
0.3
0.2
0.1
0.0
10
Max.
Max.
0.1
0.0
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Supply Voltage (V)
Temperature (oC)
Figure 25B. High Level Output vs. Voltage
Figure 25A. High Level Output vs. Temperature
0.5
0.4
0.3
0.2
0.5
0.4
0.3
0.2
0.1
0
Max.
Max.
0.1
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Supply Voltage (V)
Temperature (oC)
Figure 26B. Low Level Output vs. Voltage
Figure 26A. Low Level Output vs. Temperature
500
400
300
200
500
400
300
200
100
0
Max.
100
Max.
0
0
100
200
300
400
500
600
-50 -25
0
25 50 75 100 125
Supply Voltage (v)
Temperature (oC)
Figure 27B. Offset Supply Leakage
Current vs. Voltage
Figure 27A. Offset Supply Leakage
Current vs. Temperature
14
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
250
200
150
100
50
250
200
150
Max.
Typ.
100
Max.
50
Typ.
0
0
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 28A. VBS Supply Current
vs. Temperature
Figure 28B. VBS Supply Current
vs. Voltage
20
20
16
12
8
16
12
8
Max.
Max.
Typ.
Typ.
4
4
0
0
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 29A. Vcc Supply Current vs.
Temperature
Figure 29B. Vcc Supply Current vs. Voltage
800
600
400
200
0
800
600
400
200
0
Max.
Typ.
Max.
Typ.
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 30A. Logic "1" Input Bais Current
vs. Temperature
Figure 30B. Logic "1" Input Bais Current
vs. Voltage
www.irf.com
15
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
800
600
400
800
600
400
Max.
200
200
Max.
Typ.
Typ.
0
0
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 31A. Logic "0" Input Bais Current
vs. Temperature
Figure 31B. Logic "0" Input Bais Current
vs. Supply Voltage
400
300
200
100
0
400
300
200
100
0
Max.
Typ.
Max.
Typ.
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Temperature (oC)
Supply Voltage (V)
Figure 32A. "High" Shutdown Bais Current
vs. Temperature
Figure 32B. "High" Shutdown Bais Current
vs. Supply Voltage
500
400
300
200
500
400
300
200
100
0
Max.
Max.
100
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Temperature (oC)
Supply Voltage (V)
Figure 33A. "Low" Shutdown Bais Current
vs. Temperature
Figure 33B. "Low" Shutdown Bais Current
vs. Supply Voltage
16
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
400
300
200
100
0
400
300
200
Max.
100
Max.
Typ.
Typ.
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Temperature (oC)
Supply Voltage (V)
Figure 34A. "High" IITRIP Bais Current
vs. Temperature
Figure 34B. "High" IITRIP Bais Current
vs. Supply Voltage
500
400
300
200
100
0
500
400
300
200
100
0
Max.
Max.
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 35A. "Low" IITRIP Bais Current
vs. Temperature
Figure 35B. "Low" IITRIP Bais Current
vs. Supply Voltage
800
600
400
200
0
800
600
400
200
0
Max.
Typ.
Max.
Typ.
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 36A. "High" Fault Clear Input Bais Current
vs. Temperature
Figure 36B. "High" Fault Clear Input Bais Current
vs. Supply voltage
www.irf.com
17
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
800
600
400
800
600
400
200
200
Max.
Max.
Typ.
Typ.
0
0
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 37A. "Low" Fault Clear Input Bais Current
vs. Temperature
Figure 37B. "Low" Fault Clear Input Bais Current
vs. Supply Voltage
14
12
12
11
Max.
Max.
Typ.
9
10
Typ.
Min.
Min.
8
8
6
6
-50 -25
0
25
50
75
100 125
-50 -25
0
25
50
75
100 125
Temperature (oC)
Temperature (oC)
Figure 38A. IR2135/IR2235 VBS Undervoltage
Threshold (+) vs. Temperature
Figure 38B. IR2133/IR2233 VBS Undervoltage
Threshold (+) vs. Temperature
14
12
11
9
12
Max.
Max.
10
Typ.
Min.
Typ.
Min.
8
8
6
-50
6
-25
0
25
50
75
100 125
-50 -25
0
25
50
75
100 125
Temperature (oC)
Temperature (oC)
Figure 39B. IR2133/IR2233 VBS Undervoltage
Threshold (-) vs. Temperature
Figure 39A. IR2135/IR2235 VBS Undervoltage
Threshold (-) vs. Temperature
18
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
14
13
11
10
8
12
11
Max.
Typ.
Min.
Max.
9
Typ.
Min.
8
6
-50
-50 -25
0
25
50
75
100 125
-25
0
25
50
75
100 125
Temperature (oC)
Temperature (oC)
Figure 40A. IR2135/IR2235 Vcc Undervoltage
Threshold (+) vs. Temperature
Figure 40B. IR2133/IR2233 Vcc Undervoltage
Threshold (+) vs. Temperature
12
12
Max.
11
9
11
Typ.
Max.
Typ.
9
Min.
8
Min.
8
6
6
-50 -25
0
25
50
75
100 125
-50 -25
0
25
50
75
100 125
Temperature (oC)
Temperature (oC)
Figure 41A. IR2135/IR2235 Vcc Undervoltage
Threshold (-) vs. Temperature
Figure 41B. IR2133/IR2233 Vcc Undervoltage
Threshold (-) vs. Temperature
150
120
90
60
30
0
200
Max.
Typ.
150
100
50
Max.
Typ.
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75 100 125
Temperature (oC)
Supply Voltage (V)
Figure 42B. FAULT- Low On Resistance
vs. Supply Voltage
Figure 42A. FAULT- Low On Resistance
vs. Temperature
www.irf.com
19
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
500
400
500
400
Typ.
300
300
Min.
Typ.
200
200
Min.
100
100
0
0
10
12.5
15
17.5
20
-50 -25
0
25
50
75
100 125
Temperature (oC)
Supply voltage (V)
Figure 43A. Output Source Current
vs. Temperature
Figure 43B. Output Source Current
vs. Supply Voltage
1000
800
600
400
200
0
1000
800
600
400
200
0
Typ.
Min.
Typ.
Min.
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 44A. Ourput Sink Current
vs. Temperature
Figure 44B. Ourput Sink Current
vs. Supply Voltage
90
70
90
70
50
50
Max.
Typ.
Max.
Typ.
30
30
10
10
-10
-10
-50 -25
0
25
50
75 100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 45A. Amplifier Input Offest Voltage
vs. Temperature
Figure 45B. Amplifier Input Offest Voltage
vs. Supply Voltage
20
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
150
120
90
60
30
0
150
120
90
Typ.
Min.
Typ.
Min.
60
30
0
-50 -25
0
25
50
75
100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 46A. Amplifier Common Mode Rejection
Ratio vs. Temperature
Figure 46B. Amplifier Common Mode Rejection
Ratio vs. Supply Voltage
125
100
125
100
Typ.
Typ.
75
75
Min.
Min.
50
50
25
0
25
0
-50 -25
0
25
50
75
100 125
10
12.5
15
17.5
20
Temperature (oC)
Supply Voltage (V)
Figure 47A. Amplifier Power Supply Rejection
Ratio vs. Temperature
Figure 47B. Amplifier Power Supply Rejection
Ratio vs. Supply Voltage
6.0
50
40
30
5.7
Max.
5.4
Typ.
Max.
Min.
20
5.1
10
0
4.8
4.5
10
12.5
15
17.5
20
10
12.5
15
17.5
20
Supply Voltage (V)
Supply Voltage (V)
Figure 49. Amplifier Low Level Output Voltage
vs. Supply Voltage
Figure 48. Amplifier High Level Output Voltage
vs. Supply Voltage
www.irf.com
21
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
15
12
9
6
3
2.5
2.0
1.5
1.0
0.5
Typ.
Typ.
Min.
Min.
0
0.0
10
10
12.5
15
17.5
20
12.5
15
17.5
20
Supply Voltage (V)
Supply Voltage (V)
Figure 50. Amplifier Output Source Current
vs. Supply Voltage
Figure 51. Amplifier Output Sink Current
vs. Supply Voltage
20
16
12
20
16
12
8
8
Typ.
Typ.
4
0
4
0
10
12.5
15
17.5
20
10
12.5
15
17.5
20
Supply Voltage (V)
Supply Voltage (V)
Figure 52. Amplifier Output High Short Circuit
Current vs. Supply Voltage
Figure 53. Amplifier Output Low Short Circuit
Current vs. Supply Voltage
22
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
120
110
100
90
120
110
100
90
80
80
70
60
480
480V
70
320V
160
60
50
40
320V
160V
50
40
30
20
0V
0V
30
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
1E+4
1E+5
Frequency (Hz)
Frequency (Hz)
Figure 8. IR2133J Junction Temperature vs
Frequency Driving (IRGPC30KD2) Rgate = 5.1Ω @
Vcc = 15V
Figure 7. IR2133J Junction Temperature vs
Frequency Driving (IRGPC20KD2) Rgate = 5.1Ω @
Vcc = 15V
150
120
110
480V
140
130
120
100
480V
320V
90
80
110
100
90
80
70
60
50
40
30
20
320V
70
60
50
40
160V
0V
160V
0V
30
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
1E+4
1E+5
Frequency (Hz)
Frequency (Hz)
Figure 10. IR2133J Junction Temperature vs
Figure 9. IR2133J Junction Temperature vs
Frequency Driving (IRGPC50KD2) Rgate = 5.1Ω @
Frequency Driving (IRGPC40KD2) Rgate = 5.1Ω @
Vcc = 15V
Vcc = 15V
www.irf.com
23
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
900V
900V
1
120
120
1
110
110
500V
1
100
100
500
90
80
90
80
70
60
50
300V
0V
70
60
50
40
300
0V
40
30
20
30
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
1E+4
1E+5
Frequency (Hz)
Frequency (Hz)
Figure 11. IR2233J Junction Temperature vs
Figure 12. IR2233J Junction Temperature vs
Frequency Driving (IRG4PH30KD) Rgate = 20Ω @
Frequency Driving (IRG4PH40KD) Rgate = 15Ω @
Vcc = 15V
Vcc = 15V
300V
900V 500V
900V 500V
120
120
110
100
90
300V
110
100
90
80
80
0V
70
70
60
60
50
50
40
30
20
0V
40
30
20
1E+2
1E+3
1E+4
1E+5
1E+2
1E+3
Frequency (Hz)
1E+4
1E+5
Figure 14. IR2233J Junction Temperature vs
Figure 13. IR2233J Junction Temperature vs
Frequency Driving (IRG4ZH71KD) Rgate = 5Ω @
Frequency Driving (IRG4PH50KD) Rgate = 10Ω @
Vcc = 15V
Vcc = 15V
24
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
Package Dimensions
01-6011
28-Lead PDIP (wide body)
01-3024 02 (MS-011AB)
NOTES
01-6013
28-Lead SOIC (wide body)
01-3040 02 (MS-013AE)
www.irf.com
25
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
01-600900
44-Lead PLCC w/o 12 leads
01-3004 02(mod.) (MS-018AC)
26
www.irf.com
/
&
IR2133/IR2135/IR2233 IR2235(J S
)&(PbF)
LEADFREE PART MARKING INFORMATION
Part number
IRxxxxxx
Date code
IR logo
YWW?
?XXXX
Pin 1
Identifier
Lot Code
(Prod mode - 4 digit SPN code)
?
MARKING CODE
P
Lead Free Released
Non-Lead Free
Released
Assembly site code
Per SCOP 200-002
ORDER INFORMATION
Basic Part (Non-Lead Free)
Leadfree Part
28-Lead PDIP IR2133 order IR2133 2
8-Lead SOIC IR2133S order IR2133S
28-Lead PDIP IR2135 order IR2135
28-Lead SOIC IR2135S order IR2135S
28-Lead PDIP IR2233 not available
28-Lead SOIC IR2233S order IR2233S
28-Lead PDIP IR2235 not available
28-Lead SOIC IR2235S order IR2235S
44-Lead PLCC IR2133J order IR2133J
44-Lead PLCC IR2135J order IR2135J
44-Lead PLCC IR2233J order IR2233J
44-Lead PLCC IR2235J order IR2235J
28-Lead PDIP IR2133 order IR2133PbF
28-Lead SOIC IR2133S order IR2133SPbF
28-Lead PDIP IR2135 order IR2135PbF
28-Lead SOIC IR2135S order IR2135SPbF
28-Lead PDIP IR2233 order IR2233PbF
28-Lead SOIC IR2233S order IR2233SPbF
28-Lead PDIP IR2235 order IR2235PbF
28-Lead SOIC IR2235S order IR2235SPbF
44-Lead PLCC IR2133J order IR2133JPbF
44-Lead PLCC IR2135J order IR2135JPbF
44-Lead PLCC IR2233J order IR2233JPbF
44-Lead PLCC IR2235J order IR2235JPbF
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105
This product has been qualified per industrial level
Data and specifications subject to change without notice. 9/22/2005
www.irf.com
27
相关型号:
IR2133SPBF
Half Bridge Based MOSFET Driver, 0.5A, CMOS, PDSO28, LEAD FREE, MS-013AE, SOIC-28
INFINEON
IR2135JPBF
Half Bridge Based MOSFET Driver, 0.5A, CMOS, PQCC32, LEAD FREE, PLASTIC, MS-018AC, LCC-44/32
INFINEON
©2020 ICPDF网 联系我们和版权申明