AUIRS2110STR [INFINEON]
Automotive Grade; 汽车级型号: | AUIRS2110STR |
厂家: | Infineon |
描述: | Automotive Grade |
文件: | 总18页 (文件大小:376K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Dec. 13, 2009
Automotive Grade
AUIRS211(0,3)S
HIGH- AND LOW-SIDE DRIVER
Product Summary
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Floating channel designed for bootstrap operation
Topology
VOFFSET
VOUT
2 channels
500 V max
Fully operational to +500 V or +600 V
Tolerant to negative transient voltage – dV/dt immune
Gate drive supply range from 10 V to 20 V
Undervoltage lockout for both channels
3.3 V input logic compatible
Separate logic supply range from 3.3 V to 20 V
Logic and power ground ±5 V offset
CMOS Schmitt-triggered inputs with pull-down
Cycle by cycle edge-triggered shutdown logic
Matched propagation delay for both channels
Output in phase with inputs
AUIRS2110
AUIRS2113
600 V max
10 V – 20 V
2.5 A / 2.5 A
140 ns & 120 ns
Io+ & I o- (typical)
tON & tOFF (typical)
Delay Matching (max.)
35 ns max
Leadfree, roHS Compliant
Automotive qualified*
Package Option
Typical Applications
•
•
•
•
•
•
Hybrid electric vehicles
Air condition drives, pumps, fans
Automotive general purpose dual LS/HS driver
Automotive motor drives
Automotive DC/DC converters
Automotive injection control
16-Lead SOIC
AUIRS211(0,3)S
Typical Connection Diagram
www.irf.com
© 2008 International Rectifier
AUIRS211(0,3)S
Table of Contents
Page
Description
3
Qualification Information
Absolute Maximum Ratings
Recommended Operating Conditions
Static Electrical Characteristics
Dynamic Electrical Characteristics
Functional Block Diagram
Input/Output Pin Equivalent Circuit Diagram
Lead Definitions
4
5
5
6
6
7
8
9
Lead Assignments
9
Application Information and Additional Details
Parameter Temperature Trends
Package Details
10-11
12-14
15
16
17
18
Tape and Reel Details
Part Marking Information
Ordering Information
www.irf.com
© 2008 International Rectifier
2
AUIRS211(0,3)S
Description
The AUIRS211(0,3)S are high voltage, high speed power MOSFET and IGBT drivers with independent high and
low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized
monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic.
The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction.
Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used
to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 V or 600 V.
www.irf.com
© 2008 International Rectifier
3
AUIRS211(0,3)S
Qualification Information†
Automotive
(per AEC-Q100††)
Qualification Level
Comments: This family of ICs has passed an Automotive
qualification. IR’s Industrial and Consumer qualification level
is granted by extension of the higher Automotive level.
MSL3††† 260°C
SOIC16W
Moisture Sensitivity Level
(per IPC/JEDEC J-STD-020)
Class M2 (Pass +/-200V)
(per AEC-Q100-003)
Machine Model
ESD
Class H1B (Pass +/-1000V)
Human Body Model
(
)
per AEC-Q100-002
Class C4 (Pass +/-1000V)
(per AEC-Q100-011)
Class II, Level A
Charged Device Model
IC Latch-Up Test
RoHS Compliant
(per
)
AEC-Q100-004
Yes
†
††
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
Exceptions to AEC-Q100 requirements are noted in the qualification report.
††† Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
www.irf.com
© 2008 International Rectifier
4
AUIRS211(0,3)S
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage
parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are
measured under board mounted and still air conditions.
Symbol
Definition
Min.
-0.3
Max.
Units
†
(AUIRS2110)
(AUIRS2113)
520 ( )
VB
High-side floating supply voltage
†
-0.3
620 ( )
VS
VHO
VCC
VLO
VDD
VSS
VIN
High-side floating supply offset voltage
High-side floating output voltage
Low-side fixed supply voltage
Low-side output voltage
VB - 20
VS - 0.3
-0.3
VB + 0.3
VB + 0.3
20
V
-0.3
VCC + 0.3
†
Logic supply voltage
-0.3
VSS + 20 ( )
Logic supply offset voltage
VCC - 20
VSS -0.3
—
VCC + 0.3
VDD + 0.3
50
Logic input voltage (HIN, LIN & SD)
dVS/dt
PD
Allowable offset supply voltage transient (Fig. 2)
Package power dissipation @ TA ≤ 25°C
Thermal resistance, junction to ambient
Junction temperature
V/ns
W
—
—
1.25
RthJA
TJ
100
°C/W
—
150
°C
TS
Storage temperature
-55
—
150
TL
Lead temperature (soldering, 10 seconds)
300
†
All supplies are fully tested at 25 V, and an internal 20 V clamp exists for each supply.
Recommended Operating Conditions
The input/output logic timing diagram is shown in Figure 1. For proper operation the device should be used within
the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at 15 V differential.
Symbol
Definition
Min.
Max.
VS +20
500
Units
VB
High-side floating supply absolute voltage
VS +10
(AUIRS2110)
(AUIRS2113)
†
†
VS
High-side floating supply offset voltage
600
VHO
VCC
VLO
VDD
VSS
VIN
High-side floating output voltage
Low-side fixed supply voltage
Low-side output voltage
VS
VB
10
20
V
0
VCC
Logic supply voltage
VSS + 3
††
VSS + 20
5
Logic ground offset voltage
Logic input voltage (HIN, LIN & SD)
Ambient temperature
-5 (
)
VSS
VDD
TA
-40
125
°C
†
Logic operational for VS of -4 V to +500 V. Logic state held for VS of -4 V to – VBS.
(Please refer to the Design Tip DT97 -3 for more details).
†† When VDD < 5 V, the minimum VSS offset is limited to –VDD.
www.irf.com
© 2008 International Rectifier
5
AUIRS211(0,3)S
Static Electrical Characteristics
Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤
125°C with bias conditions of VBIAS (VCC, VBS, VDD ) = 15 V, VSS = COM. The VIL, VTH and IIN parameters are
referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO, and IO parameters are
referenced to COM and are applicable to the respective output leads: HO or LO.
Symbol
VIH
Definition
Logic “1” input voltage
Min Typ Max Units Test Conditions
9.5
—
—
—
—
—
—
—
—
6.0
VIL
Logic “0” input voltage
V
VOH
High level output voltage, VBIAS - VO
Low level output voltage, VO
1.4
IO = 0 A
VOL
0.15
IO = 20 mA
VB = VS = 500
V/600 V
ILK
Offset supply leakage current
—
—
50
IQBS
IQCC
IQDD
IIN+
Quiescent VBS supply current
Quiescent VCC supply current
—
—
70 130
125 230
VIN = 0 V or VDD
µA
Quiescent VDD supply current
Logic “1” input bias current
Logic “0” input bias current
—
—
—
5
20
—
30
40
VIN = VDD
VIN = 0 V
IIN-
5.0
VBSUV+
VBS supply undervoltage positive going threshold
7.5 8.6 9.7
7.0 8.2 9.4
7.4 8.5 9.6
7.0 8.2 9.4
VBSUV-
VCCUV+
VCCUV-
VBS supply undervoltage negative going threshold
VCC supply undervoltage positive going threshold
VCC supply undervoltage negative going threshold
V
A
VO = 0 V,
VIN = VDD
PW ≤ 10 us
VO = 15 V,
VIN = 0 V
†)
Output high short circuit pulsed current (
IO+
2.0 2.5
2.0 2.5
—
—
†)
Output low short circuit pulsed current(
IO-
PW ≤ 10 us
†) Guaranteed by design
(
Dynamic Electrical Characteristics
Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤
125°C with bias conditions of VBIAS (VCC, VBS, VDD ) = 15 V, CL = 1000 pF, and VSS = COM. The dynamic electrical
characteristics are measured using the test circuit shown in Fig. 3.
Symbol
Definition
Turn-on propagation delay
Min Typ Max Units Test Conditions
ton
toff
tsd
t r
—
—
—
—
—
—
140 230
120 210
125 220
VS = 0 V
Turn-off propagation delay
Shutdown propagation delay
Turn-on rise time
VS = 500 V/600 V
ns
25
15
—
40
30
35
t f
Turn-off fall time
MT
Delay matching, HS & LS turn on/off
Note: Please refer to figures in Parameter Temperature Trends section
www.irf.com
© 2008 International Rectifier
6
AUIRS211(0,3)S
Functional Block Diagram
www.irf.com
© 2008 International Rectifier
7
AUIRS211(0,3)S
Input/Output Pin Equivalent Circuit Diagrams
www.irf.com
© 2008 International Rectifier
8
AUIRS211(0,3)S
Lead Definitions
Pin
1
Symbol
LO
Description
Low-side gate drive output
Low-side return
2
COM
VCC
NC
3
Low-side supply
4
Not connected
5
NC
Not connected
6
VS
High-side floating supply return
High-side floating supply
High-side gate drive output
Not connected
7
VB
8
HO
NC
9
10
11
12
13
14
15
16
NC
Not connected
VDD
HIN
SD
Logic supply
Logic input for high-side gate driver output (HO), in phase
Logic input for shutdown
LIN
VSS
NC
Logic input for low-side gate driver output (LO), in phase
Logic ground
Not connected
Lead Assignments
www.irf.com
© 2008 International Rectifier
9
AUIRS211(0,3)S
Application Information and Additional Details
Figure 2: Floating Supply Voltage Trsient Test Circuit
Figure 3: Switching Time Test Circuit
www.irf.com
© 2008 International Rectifier
10
AUIRS211(0,3)S
Figure 4: Switching Time Waveform Definitions
Figure 5: Shutdown Waveform Definitions
Figure 6: Delay Matching Waveform Definitions
www.irf.com
© 2008 International Rectifier
11
AUIRS211(0,3)S
Parameter Temperature Trends
Figures illustrated in this chapter provide information on the experimental performance of the AUIRS211(0,3)S
HVIC. The line plotted in each figure is generated from actual lab data. A large number of individual samples were
tested at three temperatures (-40 ºC, 25 ºC, and 125 ºC) in order to generate the experimental curve. The line
consists of three data points (one data point at each of the tested temperatures) that have been connected
together to illustrate the understood trend. The individual data points on the Typ. curve were determined by
calculating the averaged experimental value of the parameter (for a given temperature).
260
220
180
140
100
190
165
140
115
90
Max.
M ax.
Typ.
M in.
Typ.
Min.
-50
-25
0
25
50
75
100
125
-50
-25
0
25
50
75
100
125
Temperature (oC)
Temperature (oC)
Figure 7. Turn-On Time vs. Temperature
Figure 8. Turn-Off Time vs. Temperature
28
26
24
22
20
190
M ax.
165
140
115
90
Typ.
M ax.
Typ.
Min.
M in.
-50
-25
0
25
Temperature (oC)
Figure 10. Turn-On Rise Time vs. Temperature
50
75
100
125
-50
-25
0
25
Temperature (oC)
Figure 9. Shutdown Time vs. Temperature
50
75
100
125
www.irf.com
© 2008 International Rectifier
12
AUIRS211(0,3)S
17
16
15
14
13
2.0
1.5
1.0
0.5
0.0
M ax.
M ax.
Typ.
Typ.
M in.
M in.
-50
-25
0
25
50
75
100
125
-50
-25
0
25
50
75
100
125
Temperature (oC)
Temperature (oC)
Figure 11. Turn-Off Fall Time vs. Temperature
Figure 12. High Level Output Voltage vs. Temperature (IO
= 0 mA)
40
30
20
65
60
55
50
45
Max.
Max.
10
Typ.
M in.
Min.
Typ.
0
-50
-25
0
25
50
75
100
125
-50
-25
0
25
50
75
100
125
Temperature (oC)
Temperature (oC)
Figure 13. Low Level Output vs. Temperature
Figure 14. Offset Supply Current vs. Temperature
95
85
75
65
55
200
175
150
M ax.
Typ.
M ax.
125
Typ.
M in.
M in.
100
-50
-25
0
25
Temperature (oC)
Figure 16. VCC Supply Current vs. Temperature
50
75
100
125
-50
-25
0
25
Temperature (oC)
Figure 15. VBS Supply Current vs. Temperature
50
75
100
125
www.irf.com
© 2008 International Rectifier
13
AUIRS211(0,3)S
14.0
11.0
8.0
9.00
8.75
8.50
8.25
8.00
M ax.
Typ.
M ax.
Typ.
M in.
5.0
M in.
2.0
-50
-25
0
25
50
75
100 125
-50
-25
0
25
50
75
100 125
Temperature (oC)
Temperature (oC)
Figure 18. VBS Undervoltage (+) vs. Temperature
Figure 17. VDD Supply Current vs. Temperature
9.0
9.0
8.8
8.5
M ax
Max.
8.5
8.0
Typ.
Typ.
8.3
Min.
7.5
M in.
8.0
7.0
-50
-25
0
25
50
75
100 125
-50
-25
0
25
50
75
100
125
Temperature (oC)
Temperature (oC)
Figure 19. VBS Undervoltage (-) vs. Temperature
Figure 20. VCC Undervoltage (+) vs. Temperature
9.0
8.5
M ax
8.0
Typ.
M in.
7.5
7.0
-50
-25
0
25
Temperature (oC)
Figure 21. VCC Undervoltage (-) vs. Temperature
50
75
100
125
www.irf.com
© 2008 International Rectifier
14
AUIRS211(0,3)S
Package Details: SOIC16WB
www.irf.com
© 2008 International Rectifier
15
AUIRS211(0,3)S
Tape and Reel Details: SOIC16WB
LOADED TAPE FEED DIRECTION
A
B
H
D
F
C
NOTE : CONTROLLING
DIMENSION IN MM
E
G
CARRIER TAPE DIMENSION FOR 16SOICN
Metric
Min
Imperial
Min
Code
A
B
C
D
E
F
G
H
Max
8.10
4.10
16.30
7.60
6.60
10.40
n/a
Max
0.318
0.161
0.641
0.299
0.260
0.409
n/a
7.90
3.90
15.70
7.40
6.40
10.20
1.50
1.50
0.311
0.153
0.618
0.291
0.252
0.402
0.059
0.059
1.60
0.062
F
D
B
C
A
E
G
H
REEL DIMENSIONS FOR 16SOICN
Metric
Min
329.60
20.95
12.80
1.95
98.00
n/a
18.50
16.40
Imperial
Code
A
B
C
D
E
F
G
H
Max
330.25
21.45
13.20
2.45
102.00
22.40
21.10
18.40
Min
12.976
0.824
0.503
0.767
3.858
n/a
Max
13.001
0.844
0.519
0.096
4.015
0.881
0.830
0.724
0.728
0.645
www.irf.com
© 2008 International Rectifier
16
AUIRS211(0,3)S
Part Marking Information
Part number
Date code
AUIRSxxxxx
AYWW ?
IR logo
Pin 1
Identifier
? XXXX
Lot Code
(Prod mode –
4 digit SPN code)
?
MARKING CODE
P
Lead Free Released
Non-Lead Free Released
Assembly site code
Per SCOP 200-002
Ordering Information
Standard Pack
Base Part Number
Package Type
Complete Part Number
Form
Quantity
25
Tube/Bulk
AUIRS2110S
AUIRS2110STR
AUIRS2113S
SOIC16W
SOIC16W
AUIRS2110S
Tape and Reel
Tube/Bulk
1000
25
AUIRS2113S
AUIRS2113STR
Tape and Reel
1000
www.irf.com
© 2008 International Rectifier
17
AUIRS211(0,3)S
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries
(IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its
products and services at any time and to discontinue any product or services without notice. Part numbers
designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to
product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions
of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance
with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems
necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their
products and applications using IR components. To minimize the risks with customer products and applications,
customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of
this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for
such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that
product or service voids all express and any implied warranties for the associated IR product or service and is an
unfair and deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical
implant into the body, or in other applications intended to support or sustain life, or in any other application in which
the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer
purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold
International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim
of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR
was negligent regarding the design or manufacture of the product.
IR products are neither designed nor intended for use in military/aerospace applications or environments unless
the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products
designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use
of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely
responsible for compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the
specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number
including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in
automotive applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245
Tel: (310) 252-7105
www.irf.com
© 2008 International Rectifier
18
相关型号:
©2020 ICPDF网 联系我们和版权申明