ICS2304NZGI-1T [ICSI]
LOW SKEW PCI/PCI-X BUFFER; 低偏移的PCI / PCI - X缓存型号: | ICS2304NZGI-1T |
厂家: | INTEGRATED CIRCUIT SOLUTION INC |
描述: | LOW SKEW PCI/PCI-X BUFFER |
文件: | 总10页 (文件大小:178K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Description
Features
The ICS2304NZ-1 is a high-performance, low skew,
low jitter PCI/PCI-X clock driver. It is designed to
distribute high-speed signals in PCI/PCI-X applications
operating at speeds from 0 to 140 MHz.
• Packaged in 8-pin TSSOP (4.4 mm body)
• Available in Pb (lead) free package
• Frequency range of 0 to 140 MHz
• Less than 100 ps skew between outputs
• Distribute one clock input to one bank of four outputs
• Operating voltage of 3.3 V 10%
The ICS2304NZ-1 is characterized for operation from
-40°C to +85°C for automotive and industrial
applications.
• Available in commercial and industrial temperature
ranges
Block Diagram
Logic
Control
OE
CLK0
CLK1
CLK2
CLK3
CLK_IN
MDS 2304NZ-1 C
1
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Pin Assignment
Functionality Table
Inputs
CLK_IN
Outputs
CLK(3:0)
Tristate
0
CLK_I N
OE
8
7
6
5
1
2
3
4
CLK3
CLK2
VDD
OE
0
0
0
1
1
CLK0
GND
1
CLK1
0
Tristate
1
1
Pin Descriptions
Pin
Number
Pin
Name
Pin
Pin Description
Type
Input
Input
1
2
3
4
5
6
7
8
CLK_IN
OE
Input reference frequency.
Output Enable. When OE is low, it tri-states clock outputs.
CLK0
GND
CLK1
VDD
Output Buffered clock output.
Power Connect to ground.
Output Buffered clock output.
Power Power supply for 3.3 V.
Output Buffered clock output.
Output Buffered clock output.
CLK2
CLK3
MDS 2304NZ-1 C
2
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS2304NZ-1. These ratings,
which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of
the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Rating
Supply Voltage Range, V
-0.5 V to 4.3 V
-0.5 V to V + 0.5 V
DD
Input Voltage Range, V (see notes 1 and 2)
I
DD
Output Voltage Range, V (see notes 1 and 2)
-0.5 V to V + 0.5 V
O
DD
Input Clamp Current, I (V <0 or V >V )
DD
50 mA
50 mA
IK
I
I
Output Clamp Current, I (V <0 or V )
IK
O
O
Continuous Total Output Current, I (V = 0 to V )
DD
50 mA
O
O
Package Thermal Impedance, θ (see note 3): PW
230.5°C/W
JA
Package
Storage Temperature Range, T
-65°C to 150°C
stg
Notes:
1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 4.6 V maximum.
3. The package thermal impedance is calculated in accordance with JESD 51.
Recommended Operation Conditions
Parameter
Min.
Typ.
Max.
Units
V
Supply Voltage, V
3
3.3
3.6
DD
High-level Input Voltage, V
0.7 x V
0
V
IH
DD
Low-level Input Voltage, V
0.3 x V
V
IL
DD
Input Voltage, V
V
V
I
DD
High-level Output Current, I
-24
24
mA
mA
°C
OH
Low-level Output Current, I
OL
Operating Free-air Temperature, T
-40
–
+85
A
Timing Requirements Over Recommended Ranges of Supply Voltage and Operating
Free-air Temperature
Min.
Typ.
Max.
Units
Clock Frequency, f
0
140
MHz
CLK
MDS 2304NZ-1 C
3
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Electrical Characteristics at 3.3 V over Recommended Free-air Temperature
Range
VDD = 3.3 V 10%, T = -40°C to +85°C (unless stated otherwise)
A
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Units
Input Voltage
V
V
V
at 3.3 V, I = -18 mA
-1.2
V
IK
DD
DD
I
= min to max,
V
-0.2
3.3
DD
I
= -1 mA
OH
High-level Output Voltage
Low-level Output Voltage
V
V
V
OH
V
V
V
= 3 V, I = -24 mA
2
2.3
2.7
DD
DD
DD
OH
= 3 V, I = -12 mA
2.4
OH
= min to max,
0.222
0.2
I
= 1 mA
OH
V
OL
V
V
V
V
V
V
= 3 V, I = 24 mA
0.61
0.31
-53
-54
53
0.8
0.55
-40
DD
DD
DD
DD
DD
DD
OL
= 3 V, I = 12 mA
OL
= 3 V, V = 1 V
O
High-level Input Current
Low-level Input Current
I
mA
mA
OH
= 3.3 V, V = 1.65 V
O
= 3 V, V = 2 V
40
O
I
OL
= 3.3 V, V = 1.65 V
57
O
Input Current
I
V = V or V
O
0.1
50
37
µA
I
DD
Dynamic Supply Current
I
Unloaded outputs at
66.67 MHz
13
3
mA
DD
Input Capacitance
(Note 1)
C
V
= 3.3 V,
DD
5
pF
pF
I
V = 0V or 3.3 V
I
Output Capacitance
(Note 1)
C
V
= 3.3 V,
DD
3.2
O
V = 0V or 3.3 V
I
Note 1: Guaranteed by design, not 100% tested in production.
MDS 2304NZ-1 C
4
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Switching Characteristics at 3.3 V over Recommended Ranges of Supply
Voltage and Operating Free-air Temperature
VDD = 3.3 V 10%, T = -40°C to 85°C (unless stated otherwise)
A
Parameter
Symbol Conditions
Min.
1.8
Typ.
3.1
2.9
50
Max. Units
High-to-Low Propagation Delay (Note 1)
Low-to-High Propagation Delay (Note 1)
Output Skew Window (Note 1)
t
t
V = V /2
3.8
3.8
ns
ns
ps
ps
ps
ns
ns
ns
ns
ns
PLH
PHL
O
DD
V = V /2
1.8
O
DD
T
(o) V = V /2
100
300
500
SK
SK
O
DD
Pulse Skew = | t
- t
| (Note 1)
T
(p) V = V /2
O DD
PLH PHL
Process Skew (Note 1)
T
(pr) V = V /2
SK O DD
66 MHz
140 MHz
66 MHz
140 MHz
6
3
6
3
CLKIN High Time (Note1)
T
high
CLKIN Low Time (Note1)
Rise Time (Note 1)
T
low
T
V
V
=0.8 V,
1.2
1.2
2.0
2.0
200
40
r
OL
=2.0 V
OH
Fall Time (Note 1)
Cycle-to-Cycle Jitter
Jitter, 1-Sigma
T
V
V
=2.0 V,
=0.8 V
ns
ps
ps
f
OH
OL
T
Loaded
outputs
cyc-cyc
T 1s
10,000 cycles
14
j
Note 1: Guaranteed by design, not 100% tested in production.
MDS 2304NZ-1 C
5
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Parameter Measurement Information
VDD
50% VDD
CLKIN
0V
tPLH
tPHL
VOH
2.0 V
2.0 V
50% VDD
50% VDD
0.8 V
0.8 V
CLK0-CLK3
VOL
tr
tf
Figure 2. Voltage Thresholds for Propagation Delay (t ) Measurements
pd
50% VDD
Any CLK
50% VDD
Any CLK
tSK(p)
Figure 3. Output Skew
tCYC
Parameter
Value
0.5 VDD
0.35 VDD
0.4 VDD
Unit
V
tHIGH
VIH (MIN)
VIL (MAX)
VTEST
0.5 VDD
V
V
tLOW
VIH (MIN)
VTEST
VIL (MAX)
0.2 VDD
0.4 VDD
Peak-to-Peak (minimum)
Figure 4. Clock Waveform
MDS 2304NZ-1 C
6
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Figure 5. Supply Current vs. Frequency
Figure 6. High-level Output Voltage vs. High-level Output Current
MDS 2304NZ-1 C
7
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Figure 7. Low-level Output Voltage vs. Low-level Output Current
MDS 2304NZ-1 C
8
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Marking Diagram
Marking Diagram (Pb free)
8
5
8
5
1
4
1
4
BOTTOM
BOTTOM
TOP
TOP
Marking Diagram (Pb free/industrial)
Marking Diagram (industrial)
8
5
8
5
1
4
1
4
BOTTOM
TOP
BOTTOM
TOP
Notes:
1. ###### is the lot number.
2. YYWW is the last two digits of the year and week
that the part was assembled.
3. “LF” denotes Pb (lead) free package.
4. Bottom marking: (origin). Origin = country of origin if
not USA.
MDS 2304NZ-1 C
9
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS2304NZ-1
LOW SKEW PCI/PCI-X BUFFER
Package Outline and Package Dimensions (8-pin TSSOP, 4.40 mm Body, 0.65 mm Pitch)
Package dimensions are kept current with JEDEC Publication No. 95, MO-153
8
Millimeters
Min Max
Inches
Max
Symbol
Min
--
A
A1
A2
b
--
1.20
0.15
1.05
0.30
0.20
3.10
0.047
0.006
0.041
0.012
E1
E
0.05
0.80
0.19
0.09
2.90
0.002
0.032
0.007
INDEX
AREA
C
D
E
0.0035 0.008
0.114 0.122
0.252 BASIC
0.169 0.177
0.0256 Basic
1 2
6.40 BASIC
4.30 4.50
0.65 Basic
E1
e
D
L
0.45
0°
0.75
8°
0.018
0°
0.030
8°
α
A
aaa
--
0.10
--
0.004
A2
A1
c
- C -
e
SEATING
PLANE
b
L
aaa C
Ordering Information
Part / Order Number
ICS2304NZG-1
ICS2304NZG-1T
ICS2304NZG-1LF
ICS2304NZG-1LFT
ICS2304NZGI-1
ICS2304NZGI-1T
ICS2304NZGI-1LF
ICS2304NZGI-1LFT
Marking
Shipping Packaging
Tubes
Package
Temperature
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
8-pin TSSOP
8-pin TSSOP
8-pin TSSOP
8-pin TSSOP
8-pin TSSOP
8-pin TSSOP
8-pin TSSOP
8-pin TSSOP
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
see page 8
Tape and Reel
Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems (ICS)
assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would
result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial
applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary
environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any
circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or
critical medical instruments.
MDS 2304NZ-1 C
10
Revision 062105
Integrated Circuit Systems ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
相关型号:
©2020 ICPDF网 联系我们和版权申明