U.FL-LP-066-A-(1000) [HRS]

Interconnection Device;


型号：	U.FL-LP-066-A-(1000)
厂家：	HRS
描述：	Interconnection Device 连接器
文件：	总6页 (文件大小：221K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMT Ultra-Miniature Coaxial Connectors

U.FL Series

Meets up to 6 GHz requirement

Figure 1. Mating height comparison

(with other Hirose Electric products)

U.FL

E.FL

ꢀSpace factor of mated connector

ꢀFeatures

Figure 2. U.FL-LP-040 and U.FL-R-SMT

1. Mating heights one of the lowest profiles

Height from the printed circuit board when mates a receptacle with

a (right-angle) plug is 2.5 mm maximum. This low Profile is at the

world’s shortest level.

2. Extremely small board occupation area

In comparison with our E.FL Series of SMT coaxial connectors, the

receptacles offer a reduction of approximately 18% of the board

occupation area resulting in an area of just 7.7 mm².

U.FL-R-SMT

U.FL-LP-040

3. World’s lightest

These are the world’s lightest coaxial connectors.

Receptacle: 15.7 mg

Right-angle plugs

For Ø 0.81 mm cable: 53.7 mg

For Ø 1.13 & 1.32 mm cable: 59.1 mg

4. Can be used with a frequency of up to 6 GHz

To meet the frequency requirements of a wide variety of miniature

equipment, these connectors offer high frequency performance

from DC to 6 GHz.

Figure 3. U.FL-LP-066and U.FL-R-SMT

5. Can be used with Automatic Mounting

The embossed tape packaging specification of the receptacles

permits automatic mounting.

U.FL-R-SMT

U.FL-LP-066

6. Use of ultra-fine Teflon cable

From among the types of suitable cable, Ø 0.8 mm (single shield)

outside diameter ultra-fine Teflon coaxial cable has been made a

standard specification in consideration of improving the

construction qualities and construction area.

An external diameter Ø1.32 mm (double shield) & Ø1.13mm (single

shield) ultra-fine Teflon coaxial cable specification is also available.

7. Simple removal of connectors

The extraction jig permits simple removal of connectors.

ꢀApplications

8. Mating checks made easy

Subminiature size notwithstanding, the lock sensation permits a

check of sure mating.

Mobile phones, wireless communications

equipment, electronic measuring instruments,

GPS, wireless LAN, Bluetooth etc.

2002.3

ꢀ Product specifications

Nominal characteristic impedance

50ø

60 V AC (rms)

DC to 6 GHz

Operating temperature range

Operating humidity

-40˚C to +90˚C

90% max.

Ratings

Rated voltage

Rated frequency

Item

Conditions

Specification

Center: 20 mø max.

1. Contact resistance

Measured at 10 mA max.

Outside: 10 mø max.

2. Insulation resistance

3. Withstand voltage

4. V.S.W.R.*

Measured at 100 V DC

200 V AC for 1 minute

DC to 3 GHz

500 Mø min.

No line or insulation breakdown

1.3 max.

Dia.0.81Cable

1.35

1.4

Dia.1.13Cable

3 to 6 GHz

Dia.1.32Cable

1.5

5. Female contact holding force

6. Repetitive operation

0.15 N min.

Measured with a Ø 0.475 pin gauge

25 mø max. (Center)

15 mø max. (Outside)

30 cycles of insertion and disengagement

Contact resistance

No momentary disconnections of 1 µs min.

No damage, cracks, or parts looseness min.

Frequency of 10 to 100 Hz, single amplitude of 1.5 mm,

7. Vibration

8. Shock

acceleration of 59 m/s², for 5 cyles in the direction of each of the 3 axes

No momentary disconnections of 1 µs min.

No damage, cracks, or parts looseness

Acceleration of 735 m/s², 11 ms duration, sine half-wave

waveform, for 6 cycles in the direction of each of the 3 axes

No damage, cracks, or parts looseness

Insulation resistance 100 Mø min.(High temperature)

Insulation resistance 500 Mø min.(Pry)

9. Humidity resistance

9. (Steady state)

Temperature of 40˚C, humidity of 95%,

let stand for 96 hours

No damage, cracks, or parts looseness

Contact resistance 25 mø max. (Center)

15 mø max. (Outside)

Temperature: +40˚C

5 to 35˚C

Within 5 min.

+90˚C

30 min.

5 to 35˚C

Within 5 min.

10. Temperature cycle

Time:

30 min.

Cycles: 5

No excessive corrosion

48 hours continuous exposure to 5% salt water

11. Salt spray test

*V.S.W.R. Measurement System

The above V.S.W.R. standard values were measured using the measurement system of the diagram below.

NOTE 1: Cable type connectors were measured with SMA conversion adapters

attached to both ends of the harness product of a suitable 100cm cable.

NOTE 2: Board type connectors were mounted to a 50Ω glass epoxy board and

measurements were conducted with SMA conversion adapters attached.

ꢀMaterials

Part

Material

Phosphor bronze

Brass

Finish

Silver plating

Gold plating

Black

Remarks

—————

UL94V-0

Shell

Male center contact

Phosphor bronze

Female center contact

Plug

Receptacle

PBT

LCP

Insulator

Beige

UL94V-0

ꢀPlugs

U.FL-LP-040

Form of Plug After Cable Wiring

U.FL-LP-066

Item

Form of Plug After Cable Wiring

Applicable Cable

HRS No.

Part No.

Weight (mg)

53.7/unit

RF-MF5010 Manufactured by Nissei Electric Co., Ltd.

J12B0964 Manufactured by Junkosha Co., Ltd.

CO-6F-SB-CX50 Manufactured by Hitachi Cable, Ltd.

Right-angle plug shell

CL331-0451-2

U.FL-LP-040

(for

Ø 0.81 cable)

Right-angle receptacle

(for 1.13 cable)

RF-MF5016 Manufactured by Nissei Electric Co., Ltd.

J12B1054 Manufactured by Junkosha Co., Ltd.

CL331-0452-5

U.FL-LP-066

59.1/unit

Right-angle receptacle

(for 1.32 cable)

A12B0733 Manufactured by Junkosha Co., Ltd.

CO-6F-DSB-CX-50 Manufactured by Hitachi Cable, Ltd.

Please order plugs with the cable assembly specifications.

ꢀCable Assembly

Dimension of U.FL Series assembly products should be made as indicated below.

Double-Ended Cable Assembly

Single-Ended Cable Assembly

ꢀCable assembly overall length and standard tolerance

ꢀOrdering information

U.FL - [] LP - [] - A - (L)

Overall Length L (mm)

< <

Standard Tolerance (mm)

0035 L 0200

= =

0200<L=0500

Series name

U.FL

0500<L=1000

Blank: Single ended

2: Double ended

2 Assembly type

1000<L=1000

1.5%

04 : For use with Ø 0.81 cable

Note: Shortest length L is 35 mm.

Cable type

5016 : For use with

066 : For use with

1.13 cable

1.32 cable

Overall length (mm)

Length L is expressed in mm units.

Part No. of Cable Assembly

CL No.

Description

^321-1937-2-**

^321-1998-7-**

^321-2493-6-**

^321-2492-3-**

^321-2170-7-**

^321-2573-3-**

U.FL-2LP-04-A-(L)

U.FL-LP-04-A-(L)

Dia. 0.81mm Double Ended Cable Assembly

Dia. 0.81mm Single Ended Cable Assembly

Dia. 1.13mm Double Ended Cable Assembly

Dia. 1.13mm Single Ended Cable Assembly

Dia. 1.32mm Double Ended Cable Assembly

Dia. 1.32mm Single Ended Cable Assembly

U.FL-2LP-5016-A-(L)

U.FL-LP-5016-A-(L)

U.FL-2LP-066-A-(L)

U.FL-LP-066-A-(L)

Please contact Hirose sales representative about cable length and cable end treatment.

ꢀReceptacles

NOTE 1: Receptacles of the (01) specification are sold by

the pack with 100 pieces per pack. Please order

in pack units.

Recommended PCB Footprints

NOTE 2: Receptacles of the (10) specification are sold by

the reel (which contains 2,500 pieces). Please

order in reel units.

NOTE 3: Permissible value for mold resin which gets onto

the center contact.

HRS No.

Part No.

Sales Quantity

Weight (mg)

15.7/unit

CL331-0471-0-01

CL331-0471-0-10

U.FL-R-SMT(01)

U.FL-R-SMT(10)

Pack sales (100 pieces per pack)

Reel sales (2,500 pieces per reel)

ꢀPackaging specifications

Embossed Carrier Tape dimensions

Unreeling direction

Reel dimensions

ꢀConversion adapter

ꢀSMA Conversion adapter

(Coupling portion: U.FL side jack - SMA side plug)

NOTE: The U.FL side coupling portion has a weaker lock than

the regular product and, therefore, cannot be used for

purposes other than performance measurements.

HRS No.

Product No.

CL311-0300-2

HRMP-U.FLJ

ꢀSMA Conversion adapter

(Coupling portion: U.FL side plug - SMA side jack)

NOTE: The U.FL side coupling portion has a weaker lock than

the regular product and, therefore, cannot be used for

purposes other than performance measurements.

HRS No.

Product No.

CL311-0301-5

HRMJ-U.FLP

ꢀInspection receptacle

This receptacle is used for inspecting the continuity,

withstand voltage, and other aspects of the harness

product.

NOTE: The U.FL side coupling portion does not have a lock

and, therefore, cannot be used for purposes other than

continuity and withstand voltage inspections.

HRS No.

Product No.

U.FL-R-1

CL331-0466-0

ꢀExtraction jig

This jig is used for extraction from a coupled condition.

U.FL

U.FL-LP-N-2

HRS No.

Product No.

U.FL-LP-N-2

CL331-0494-5

CL331-0441-9

ꢀUsage precautions

1. Plugs

1) To disconnect connectors, hook the end portion of E.FL-LP-N and U.FL-LP-N-2 onto the connector cover and pull off

vertically in the direction of the connector coupling axis.

1) To remove the connector directly, hold the connector cover and pull off

vertically in the direction of the connector coupling axis. (Please exercise

caution so as not to injure fingertips or nails.)

2) To couple the connectors, the coupling axes of both connectors are

aligned and the connectors are inserted as perpendicularly as possible.

Do not attempt to insert on an extreme angle.

U.FL-LP-N-2

E.FL-LP-N

(1) Connection/

disconnection of

connectors

U.FL-LP-040

U.FL-LP-066

U.FL-R-SMT

After the connectors are coupled, do not apply a load to the cable in excess of the values indicated in the diagram

below.

U.FL-LP-040

2N or less

(2) Permissible load on

the cable after

U.FL-R-SMT

4N or less

connector coupling.

2N or less

(3) Precautions

Please note that excessive twisting in the action of insertion or removal will cause damage.

2. Receptacles

Recommended Temperature Profile (Reference)

(1) Recommended

temperature profile

(reference)

1) The temperature indicates the printed circuit board surface temperature of the connector lead portion.

2) The reflow soldering method should be performed at a peak temperature of 240˚C or less at the surface of the

printed circuit board.

3) The temperature profile will change depending on conditions which include such factors as the size of the board,

the solder used, and the solder thickness.

(2) Recommended hand

soldering conditions

(reference)

Soldering iron temperature: 350˚C

Soldering time: Within 5 seconds

(3) Recommended screen

thickness

0.15 mm

U.FL-LP-066-A-(1000) [HRS]

相关型号：

U.FL-LP-066-A-(200)

U.FL-LP-066-A-(500)

U.FL-LP-066J1-A-(L)

U.FL-LP-066J2-A-(140)

U.FL-LP-066J2-A-(170)

U.FL-LP-066J2-A-(190)

U.FL-LP-066J2-A-(300)

U.FL-LP-066J2-A-(400)

U.FL-LP-066J2-A-(60)

U.FL-LP-066J2-A-(600)

U.FL-LP-066J2-A-(70)

U.FL-LP-066J2-A-(80)