U.FL-LP-066J2-A-(70) [HRS]

RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Plug;


型号：	U.FL-LP-066J2-A-(70)
厂家：	HRS
描述：	RF Connector, 1 Contact(s), Male, Board Mount, Surface Mount Terminal, Plug
文件：	总7页 (文件大小：196K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

U.FL Series

Up to 6GHz Transmission Speed

Mated height comparison (with E.FL series)

E.FL-LP-040

E.FL-LP-066

U.FL-LP-040

U.FL-LP-066

U.FL-LP(V)-040

U.FL

E.FL

ꢀSpace Factor of Mated Connector

ꢀFeatures

(

)

1. Nominal mated height of 1.9 or 2.4mm Max. 2.0 or 2.5mm

2. Small mounting area

The receptacle occupies an area of 7.7mm².

Cable

U.FL-LP-040

Plug

3. Light weight

Dia.0.81

Receptacle: 15.7mg

4. Accepts high frequency transmission.

U.FL-R-SMT-1

Receptacle

To meet the frequency requirements of a wide variety of

miniature devices, the connectors offer high frequency

performance from DC to 6GHz, with a V.S.W.R. of 1.3 to 1.5

max.

Cable

U.FL-LP-066

Plug

5. Automatic board placement

Dia.1.32

Dia.1.13

Packaged on tape-and-reel the receptacles can be placed with

vacuum nozzles of the automatic placement equipment.

U.FL-R-SMT-1

Receptacle

6. Plugs are terminated with ultra-fine coaxial

(

)

fluorinated resin insulated cable

Cable

Standard ultra-fine coaxial cable of 0.81mm diameter (single

braid shielding) is used for the plug termination, assuring secure

and stable connections.

U.FL-LP(V)-040

Plug

Dia.0.81

7. Simple connector mating / unmating

Use of available extraction tool assures correct disconnection

of the plug and receptacle.

U.FL-R-SMT-1

Receptacle

8. Verification of the fully mated condition

Tactile click sensation confirms fully mated condition, assuring

complete electrical and mechanical connection.

Cable

U.FL-LP-062

Plug

Dia.1.00

U.FL-R-SMT-1

Receptacle

ꢀApplications

Cellular phones, PHS, mobile phones, wireless communication

devices, electronic measuring instruments, GPS, wireless LAN,

Bluetooth and any application requiring high frequency

transmission using small coaxial connectors.

Cable

U.FL-LP-088

Plug

Dia.1.37

U.FL-R-SMT-1

Receptacle

2009.2w

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

ꢀProduct Specifications

Nominal characteristic impedance 50 ohms

Operating temperature range -40˚C to +90˚C Storage temperature range -30˚C to +70˚C

Ratings

Frequency range

DC to 6GHz

Operating humidity

90%RH max.

Storage humidity

90%RH max.

Item

Specification

Center : 20 m ohms max.

Conditions

1. Contact resistance

10 mA max.

100 V DC

Outer : 10 m ohms max.

500 M ohms min.

2. Insulation resistance

3. Withstanding voltage

4. V.S.W.R.*

No flashover or insulation breakdown.

200 V AC / 1 minute

Up to 3GHz

1.3 Max

Part No.

3 to 6GHz

U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly

U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly

U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly

U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly

U.FL-LP-062 dia.1mm Coaxial Cable Assembly

U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly

Contact resistance

1.35 Max

1.3 Max

1.4 Max

1.5 Max

1.3 Max

1.4 Max

1.3 Max

5. Durability

(mating / un-mating,

with corresponding plug)

6. Vibration

Center : 25 m ohms max.

30 cycles

Outer : 15 m ohms max.

Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration

of 59m/s², for 5 cycles in the direction of each of the 3 axis.

Acceleration of 735 m/s², 11ms duration, sine half-wave

waveform, 3 cycles in each of 3 axes.

No electrical discontinuity of 1µs min.

No damage, cracks or parts dislocation.

7. Shock

8. Humidity

No damage, cracks or parts dislocation.

Insulation resistance 10 M ohms min.(humidity high)

Insulation resistance 500 M ohms min.(dry)

No damage, cracks or parts dislocation.

Contact resistance: 25 m ohms max. (Center)

15 m ohms max. (Outer)

(Steady state)

96 hours at temperature of 40ç and humidity of 95%.

9. Temperature cycle

Temperature: -40˚C +5 to +35˚C +90˚C +5 to +35˚C

Time:

30min.

3min.

30min.

3min.

5 cycles

10. Salt spray

No excessive corrosion

5% salt water solution, 48 hours

*V.S.W.R. Measurement System

The above V.S.W.R. standard values were measured using the measurement connection shown below.

Note 1: Cable type connectors were measured with SMA conversion adapters

attached to both ends of the harness product of a suitable 100cm cable.

Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and

measurements were conducted with SMA conversion adapters attached.

ꢀMaterial / Finishes

Part

Material

Phosphor bronze

Brass

Finish

Remarks

—————

UL94V-0

Shell

Silver plated

Gold plated

Color: Black

Color: Beige

Male center contact

Female center contact

Phosphor bronze

Plug

Receptacle

PBT

LCP

Insulator

UL94V-0

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

ꢀReceptacles

Note 1: Receptacles of (01) specification are sold by the

bag with 100 pieces per bag.

Please order in pack units.

Note 2: Receptacles of (10) specification are sold by the

reel (which contains 2,500 pieces).

Please order in reel units.

Note 3: Receptacles of (40) specification are sold by the

reel (Which contains 4,000 pieces)

Note 4: This area may be covered by insulating material.

Recommended PCB

GND

Mounting Pattern

SIG

No conductive traces in this area

Ø2

0.05

1.9 0.05

GND

2.6

0.6

GND

SIG

1 0.05

U.FL-R-SMT-1

Part No.

CL No.

Packaging

Bag packaging (100 pieces/bag)

Weight / EA

15.7/mg

RoHS

YES

U.FL-R-SMT-1(01)

U.FL-R-SMT-1(10)

U.FL-R-SMT-1(40)

331-0472-2-01

331-0472-2-10

331-0472-2-40

Reel packaging (2,500 pieces/reel)

Reel packaging (4,000 pieces/reel)

ꢀPackaging Specifications

Embossed Carrier Tape Dimensions

Reel Dimensions

1.8

0.1

4 0.1

Center contact

0.3

1.6

Unreeling direction

0.1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

ꢀCable Assembly (Plug)

U.FL-LP-040

U.FL-LP-066

U.FL-LP(V)-040

U.FL-LP-062

U.FL-LP-088

Part No.

3.4

2.5mm Max.

2.0mm Max.

2.4mm Max.

Mated Height

(2.4mm Nom.)

(1.9mm Nom.)

(2.3mm Nom.)

Dia. 1.13mm and

Dia. 1.32mm

Dia. 0.81mm

Coaxial cable

Dia. 0.81mm

Coaxial cable

Dia. 1mm

Dia. 1.37mm

Coaxial cable

Applicable

cable

Coaxial cable

53.7

59.1

34.8

YES

45.5

71.7

Weight (mg)

RoHS

ꢀCable Guide

Cable Specification

Jacket

Cable

Description

Type

Nominal attenuation

Inner

Conductor^*

Dielectric

Outer

Conductor^*

Nominal

Diameter

Dia.0.40

PFA

Diameter

Dia.0.81

PFA

Impedance

At 3GHz

At 6GHz

9.52dB/m

9.42dB/m

5.44dB/m

5.13dB/m

Dia.0.81mm

Coaxial Cable

7/0.05 SA

(AWG36)

7/0.08 SA

(AWG32)

7/0.08 SA

(AWG32)

7/0.071 SA

(AWG33)

7/0.102 SA

(AWG30)

Single

6.52dB/m

6.45dB/m

3.73dB/m

3.43dB/m

50 ohms

[

]

[

]

[

]

Shield TA SA

Dia.1.13mm

068

Coaxial Cable

Dia.0.68

FEP

Single

Dia.1.13

FEP

50 ohms

[

Shield TA SA

Dia.1.32mm

066

Coaxial Cable

Dia.0.66

FEP

Double

Shield TA

Tape, single

Shield TAT

Single

Dia.1.32

FEP

3.8dB/m

3.1dB/m

2.8dB/m

5.6dB/m

4.4dB/m

4.3dB/m

Dia.1mm

062

Coaxial Cable

Dia.0.62

FEP

Dia.1

FEP

Dia.1.37mm

088

Coaxial Cable

Dia.0.88

FEP

Dia.1.37

FEP

Shield TA

(data as provided by cable suppliers, for reference only)

* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

ꢀHow to Specify Plug Cable Assembly

Single-Ended Cable Assembly

Double-Ended Cable Assembly

( )

ꢀStandard Tolerances for L

ꢀOrdering Information

Standard Tolerance

04mm

[]

( )

- A - L

U.FL -

LP -

L=35 to 200mm

L=200 to 500mm

08mm

1 Series name

U.FL

L=500 to 1000mm

12mm

2 Assembly type

LP: Single ended

L=Longer than 1000mm

Note1: Minimum available length (L) is 35mm

1.5% of (L)

2LP: Double ended

Note2: Contact nearest HRS representative if different tolerances are

04 : Dia.0.81mm Coaxial Cable

3 Cable type

required.

068 : Dia.1.13mm Coaxial Cable

066 : Dia.1.32mm Coaxial Cable

062 : Dia.1 mm Coaxial Cable

088 : Dia.1.37mm Coaxial Cable

Note3: Contact Nearest HRS representative if one end requires

preparation.

4 Total length(mm)

Length(L)

Part No. of Plug Part No. of Cable Assembly

Description

RoHS

U.FL-2LP-04N1T-A-(L)

Dia. 0.81mm double ended coaxial cable, color: white

Dia. 0.81mm double ended coaxial cable, color: black

Dia. 0.81mm single ended coaxial cable, color: white

Dia. 0.81mm single ended coaxial cable, color: black

Dia. 1.13mm double ended coaxial cable, color: gray

Dia. 1.13mm double ended coaxial cable, color: black

Dia. 1.13mm single ended coaxial cable, color: gray

Dia. 1.13mm single ended coaxial cable, color: black

Dia. 1.32mm double ended coaxial cable, color: gray

Dia. 1.32mm double ended coaxial cable, color: black

Dia. 1.32mm single ended coaxial cable, color: gray

Dia. 1.32mm single ended coaxial cable, color: black

Dia. 0.81mm double ended coaxial cable, color: white

Dia. 0.81mm double ended coaxial cable, color: black

Dia. 0.81mm single ended coaxial cable, color: white

Dia. 0.81mm single ended coaxial cable, color: black

Dia. 1mm double ended coaxial cable, color: gray

Dia. 1mm double ended coaxial cable, color: black

Dia. 1mm single ended coaxial cable, color: gray

Dia. 1mm single ended coaxial cable, color: black

Dia. 1.37mm double ended coaxial cable, color: gray

Dia. 1.37mm double ended coaxial cable, color: black

Dia. 1.37mm single ended coaxial cable, color: gray

Dia. 1.37mm single ended coaxial cable, color: black

U.FL-2LP-04N2T-A-(L)

U.FL-LP-040

U.FL-LP-04N1T-A-(L)

U.FL-LP-04N2T-A-(L)

U.FL-2LP-068N1T-A-(L)

U.FL-2LP-068N2T-A-(L)

U.FL-LP-066

U.FL-LP-068N1T-A-(L)

U.FL-LP-068N2T-A-(L)

U.FL-2LP-066N1-A-(L)

U.FL-2LP-066N2-A-(L)

U.FL-LP-066

U.FL-LP-066N1-A-(L)

U.FL-LP-066N2-A-(L)

YES

U.FL-2LP(V)-04N1T-A-(L)

U.FL-2LP(V)-04N2T-A-(L)

U.FL-LP(V)-040

U.FL-LP(V)-04N1T-A-(L)

U.FL-LP(V)-04N2T-A-(L)

U.FL-2LP-062N1D-A-(L)

U.FL-2LP-062N2D-A-(L)

U.FL-LP-062

U.FL-LP-062N1D-A-(L)

U.FL-LP-062N2D-A-(L)

U.FL-2LP-088N1T-A-(L)

U.FL-2LP-088N2T-A-(L)

U.FL-LP-088

U.FL-LP-088N1T-A-(L)

U.FL-LP-088N2T-A-(L)

Please contact Hirose Sales Representative for cable length and cable end treatment.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

ꢀConversion Adapters

ꢀSMA Conversion Adapter

(Mating portion: U.FL side jack - SMA side plug)

(10.7)

8HEX

Part No.

CL No.

RoHS

YES

Note: The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

HRMP-U.FLJ(40)

311-0300-2-40

ꢀSMA Conversion Adapter

(Mating portion: U.FL side plug - SMA side jack)

14.05

(4.05)

5.6

1/4-36UNS-2A

Part No.

CL No.

RoHS

Note: The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

HRMJ-U.FLP(40)

311-0301-5-40

YES

(18.6)

(4)

ꢀSMA Conversion Adapter

(Mating portion: U.FL side plug - SMA side jack)

5.5

1/4-36UNS-2A

Part No.

CL No.

RoHS

Note: This connector is used by compressing the mated

portion of U.FL side onto the U.FL-R-SMT-1 portion.

HRMJ-U.FLP-ST1(40)

311-0385-5-40

YES

12.9

(7.9)

ꢀReceptacle to Inspection

7HEX

(4.4)

M5∞0.5

This receptacle is used for inspecting the continuity, withstand

voltage, and other aspects of the harness product.

Part No.

CL No.

RoHS

U.FL-R-1

331-0466-0

YES

ꢀPlug Extraction Tool

(90)

This jig is used for extraction from a mating condition.

U.FL

Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.

Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.

Part No.

CL No.

RoHS

U.FL-LP-N-2

331-0494-5

331-0493-2

YES

U.FL-LP(V)-N-2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

U.FL SeriesꢀUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

ꢀUsage Precautions

1. Plugs

1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges

and pull off vertically, in the direction of the connector mating axis.

2) To mate the connectors, the mating axes of both connectors must be

aligned and the connectors can be mated. The "click" will confirm fully

mated connection.Do not attempt to insert on an extreme angle.

Extraction Jig

U.FL Cable

Assembly

(1) Mating / unmating

U.FL-R-SMT-1

After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram

below.

U.FL-LP

Cable Assembly

1N max (U.FL-LP(V)-040, U.FL-LP-062)

2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)

(2) Pull forces on the

cable after connectors

are mated.

U.FL-R-SMT-1

3N max (U.FL-LP(V)-040, U.FL-LP-062)

4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)

1N max (U.FL-LP(V)-040, U.FL-LP-062)

2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088)

(3) Precautions

Do NOT forcefully twist or deform wires.

2. Receptacles

250 ç max. for

10 seconds

[

]

q The temperature of the printed circuit board

surface temperature at the points of contact with

the terminals.

w Reflow soldering should be performed at a

printed circuit surface temperature of 250°C max.

e In individual applications the actual temperature

may vary, depending on the solder paste type,

volume / thickness and board size / thickness.

Consuly your solder paste and equipment

manufacturer for specific recommendations.

260

240

220

200

180

160

140

120

100

230ç

220ç

Preheat

(130 to 180ç)

(1) Recommended reflow

temperature profile

120 seconds max.

50 seconds max.

60 seconds max.

Time

(2) Recommended

manual soldering

Manual soldering: 350˚C for 5 seconds

(3) Recommended metal

mask thickness

0.1 to 0.12 mm

2 times

(4) Reflow cycles

3. Operating environment and storage conditions

The connectors are not designed to operate in the following environments:

• Exposed to a excessive amounts of fine particles and dust

• Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.

• Environments having large rapid variations in temperature.

(1) Operating environment

Store in the Hirose Electric packaging.

(2) Storage conditions -

Receptacle

Temperature: -10 to +40ç, Humidity: 85% max.

Use within 6 months of delivery.

Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.

U.FL-LP-066J2-A-(70) [HRS]

相关型号：

U.FL-LP-066J2-A-(80)

U.FL-LP-066J2-A-(800)

U.FL-LP-066J2-A-(900)

U.FL-LP-066J2-A-(L)

U.FL-LP-066N1-A-L

U.FL-LP-066N2-A-L

U.FL-LP-068

U.FL-LP-068N1-A-(L)

U.FL-LP-068N1T-A-L

U.FL-LP-068N2-A-(L)

U.FL-LP-068N2T-A-L

U.FL-LP-088