FH16H-50S-0.5SHW(05) [HRS]
Card Edge Connector, 50 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT;
| 型号： | FH16H-50S-0.5SHW(05) |
| 厂家： | 
HRS |
| 描述： | Card Edge Connector, 50 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT PC 连接器 |
| 文件： | 总8页 (文件大小：255K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High Density FFC/FPC Connector (0.3mm/0.4mm/0.5mm Pitch)
FH16 Series
FH16 Series Variation
0.3mm pitch 60 contact
0.3mm pitch 80 contact
0.4mm pitch 90 contact
0.4mm pitch 80 contact
0.5mm pitch 50 contact
0.5mm pitch 64 contact
ꢀFeatures
[Conventional product (FH12 series)]
0.5mm pitch 30 contact
1. High Density FFC/FPC Connector
The FH16 series is a fine pitch, zero insertion force (ZIF), right angle, bottom
contact, connector compatible with flat flex cables (FFC) or flexible printed
circuits (FPC) with a pitch of 0.3mm, 0.4mm, and 0.5mm and a recommended
thickness of 0.295mm for single-sided or 0.306mm for double-sided. The Excellent Serviceability with Flip-Lock Design
FH16 provides a higher pin count given the same amount of board space than
other manufacturers of similar product. With a large selection in pin density,
the FH16 series greatly improves design flexibility.
FH16 : 0.3mm pitch 60, 80, and 90 contacts
FH16M : 0.4mm pitch 80 and 96 contacts
FH16H : 0.5mm pitch 50 contacts
FH16P : 0.5mm pitch 64 contacts
Flip-lock type
2. Easy mounting on PCB
FH16 supports 0.3mm pitch cable but only requires a 0.6mm pitch pad
layout on the PCB. The FH16’s staggered pin design allows the
mounting lead area to be twice as wide as the FFC/FPC contact area
making it easier to place the connector on the board given the fine pitch
of the contacts.
Mechanism to prevent
FFC/FPC from escape and
oblique mating
3. User Friendly Flip-Lock Design
The flip-lock (one-touch rotating type) ZIF structure secures the
FFC/FPC connection with a single and light force. This design helps
simplify assembly and repair work. When locking the FFC/FPC, the
audible click assures the assembly worker of a steady FFC/FPC
connection resulting in improved customer service.
4. Prevents FFC/FPC from escape and oblique mating
The FH16 series with its recommended FFC/FPC dimensions prevents
the FFC/FPC from escape and oblique mating thereby securing a steady
connection.
5. Compatible with Automatic Assembly Tooling
Embossed tape packaging allows for automatic placement onto the PCB.
ꢀApplications
Notebook computers, printers, PDAs, digital cameras and other compact devices for interconnecting the main circuit board with the
(
),HDD or other device.
LCD,PDP Plasma Display
Hard
Disk-Drive
PCB
PCB
PCB
Notebook PC
HDD
PDP
66
ꢀProduct Specifications
Pitch
0.3mm
0.4mm
0.5mm
0.4A
Operating Temperature Range
:
–40ç to +70ç
Storage Temperature Range: –10ç to +50ç
Ratings
0.15A
0.3A
Current rating
Operating Relative Humidity: Relative humidity 90% max Storage Relative Humidity: Relative humidity 90% max
Voltage rating 30V AC 50V AC 60V AC (not dewed) Note1, Note2
(not dewed) Note1, Note2
Conditions
Applicable cable
t=0.30 0.05, solder plating (Note 3)
Specification
Item
1. Insulation Resistance
100V DC
500M ohms min.
0.3mm pitch: 090V AC
2. Withstanding Voltage
0.4mm pitch: 150V AC applied for one minute
0.5mm pitch: 200V AC
No flashover or insulation breakdown.
150m ohms max.
3. Contact Resistance
1mA
*Including FFC/FPC conductor resistance.
4. Durability
150m ohms max.
20 cycles
No damage, cracks, or parts dislocation.
(Insertion/withdrawal)
No electrical discontinuity of 1µs or more
Contact resistance: 150m ohms max.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions.
5. Vibration
6. Shock
No electrical discontinuity of 1µs or more
Contact resistance: 150m ohms max.
No damage, cracks, or parts dislocation.
2
Acceleration of 490 m/s , 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis.
Contact resistance: 150m ohms max.
Insulation resistance: 50M ohms max.
No damage, cracks, or parts dislocation.
7. Humidity
96 hours at temperature of 40ç and humidity of 90% to 95%
(Steady state)
+
+
+
ꢀꢀ 15ç to 35ç
Contact resistance: 150m ohms max.
Insulation resistance: 50M ohms min.
No damage, cracks, or parts dislocation.
Temperature: –40
ꢀꢀ 15 to 35ç
ꢀꢀ 85ç
8. Temperature cycle
Time
: 30 minutes ꢀꢀ5 minutes max. ꢀꢀ30 minutes ꢀꢀ5 minutes max.
5 cycles
9. Resistance to
Soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350 5ç for 3 seconds
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
ꢀMaterials
Part
Material
Polyamide
LCP
Finish
Remarks
UL94V-0
Insulator
Color : Beige
PPS
Color : Deep brown
Solder plating
Contact
Phosphor bronze
–––––––
ꢀOrdering Information
q Series name
w Series No.
: FH
: 16, 16M, 16H, 16P
( )
FH 16P – 64S – 0.5 SHW 05
e
Number of contacts : 50, 60, 64, 80, 90, and 96 contacts
r Contact pitch
: 0.3mm, 0.4mm, 0.5mm
q
w
e
r
t
y
t
y
Terminal Shape
: SHW(SMT horizontal staggered row mount type)
Plating Specification : No symbol : solder plating (05) : gold plating
67
BConnector Operation Method and Cautions
Operation Method
Precaution for Operation
1. FFC/FPC Insertion Method
)
)
A When removing the suction cover, avoid any
action that twist or pushes the corer. Such an
action results in the removal of the flip-lock.
A Remove the suction cover so as to pick it up in
the vertical direction.
)
B The FH16 Series is designed so that the flip-
)
B Insert the FFC/FPC conductor surface upside
lock does not open more than about 120°. Do
not use a force of 10N or greater to push it back
any further. Doing so will cause the flip-lock to
become disengaged or damaged.
down. Insert the FFC/FPC diagonally from above
the connector until it firmly hooks on the position-
ing point. Slightly push the FFC/FPC, and check
that it has been retained to the positioning point.
120°
)
C
Make certain to fully insert the FFC/FPC into the
connector. Improper insertion causes the FFC/FPC
to be disconnected, or conductivity failure.
)
C
Push the lock lever down, by rotating the lever inward.
Positioning point
)
D
The connector structure does not have high ten-
sile strength in the upper direction. If a tensile
strength is applied to the FFC/FPC, be sure to fix
the FFC/FPC for added support.
2. FFC/FPC Removal Method
)
A Release the locking lever by rotating it upwards.
Then slightly raise the FFC/FPC and remove it.
68
ꢀConnector Dimensions
A
B
Q
C
0.12
R
Mark
10
0.12
R
D
Suction Parts for Automatic Mounting
E
6.6
7.4
FPC Conductive Surface
Unit: mm
R
Number of
FFC/FPC
Part Number
CL No.
A
B
C
D
E
Q
contacts Contact Pitch
FH16-60S-0.3SHW
FH16-80S-0.3SHW
FH16-90S-0.3SHW
FH16M-80S-0.4SHW
FH16M-96S-0.4SHW
FH16H-50S-0.5SHW
FH16P-64S-0.5SHW
586-0620-2
586-0613-7
586-0697-7
586-0675-4
586-0715-7
586-0676-7
586-0649-4
60
80
90
80
96
50
64
0.3
0.3
0.3
0.4
0.4
0.5
0.5
21.9
27.9
30.9
36.1
42.5
29.4
36.0
17.7
23.7
26.7
31.6
38.0
24.5
31.5
17.4
23.4
26.4
31.2
37.6
24.0
31.0
17.4
23.4
26.4
31.2
37.6
24.0
31.0
18.35
24.35
27.35
32.25
38.65
25.55
32.15
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.6
0.6
0.6
0.8
0.8
1.0
1.0
NOTE: Products are packaged in embossed tape.
Order the product by the number of reels (1,000 pieces package per reel)
69
BRecommended PCB layout and metal mask dimensions
B 0.05
Q 0.05
C 0.05
R 0.05
W (PCB)
X (Metal mask)
Mark side
R 0.05
W (PCB)
X (Metal mask)
D 0.05
* Recommended metal mask thickness: t=0.15
BFFC/FPC recommended dimensions
+0.04
_0.03
0.1 0.05
0.07 0.07
0.3
0.1 0.05
Q 0.02
R 0.02
0.3 0.05
+0.04
0.3
_0.03
B 0.03
S 0.07
S 0.07
F 0.05
G 0.1
H 0.1
* Forced film material shall be polyamide + thermal hardened additives.
Unit: mm
X
FFC, Land, Metal Mask Dimension Table
Number of
FFC/FPC
Part Number
CL No.
B
C
D
F
G
H
Q
R
S
W
contacts Contact Pitch
FH16-60S-0.3SHW 586-0620-2
FH16-80S-0.3SHW 586-0613-7
FH16-90S-0.3SHW 586-0697-7
FH16M-80S-0.4SHW 586-0675-4
FH16M-96S-0.5SHW 586-0715-7
FH16H-50S-0.5SHW 586-0676-7
FH16P-64S-0.5SHW 586-0649-4
60
80
90
80
96
50
64
0.3
0.3
0.3
0.4
0.4
0.5
0.5
17.7 17.4 17.4 18.3 18.8 20.3 0.3 0.6 0.3 0.3 0.03 0.25 0.03
23.7 23.4 23.4 24.3 24.8 26.3 0.3 0.6 0.3 0.3 0.03 0.25 0.03
26.7 26.4 26.4 27.3 27.8 29.3 0.3 0.6 0.3 0.3 0.03 0.25 0.03
31.6 31.2 31.2 32.2 32.7 34.2 0.4 0.8 0.3 0.3 0.03 0.25 0.03
38.0 37.6 37.6 38.6 39.1 40.6 0.4 0.8 0.3 0.3 0.03 0.25 0.03
24.5 24.0 24.0 25.5 25.5 27.5 0.5 1.0 0.5 0.6 0.10 00.5 0.05
31.5 31.0 31.0 32.1 32.6 34.1 0.5 1.0 0.3 0.6 0.10 00.5 0.05
70
BPackaging Specification
Embossed Carrier Tape Dimensions
ꢀ
4
2
12
6.8
0.5
Flat surface for placement
with Automatic equipment
1.5
4.9
7
Unreeling direction
Unit: mm
Number of
Contacts
Inserted Connector
J
K
L
M
T
FH16-60S-0.3SHW
FH16-80S-0.3SHW
FH16-90S-0.3SHW
FH16M-80S-0.4SHW
FH16M-96S-0.4SHW
FH16H-50S-0.5SHW
FH16P-64S-0.5SHW
60
80
90
80
96
50
64
44
44
44
56
56
44
56
40.4
40.4
40.4
52.4
52.4
40.4
52.4
20.2
20.2
20.2
26.2
26.2
20.2
26.2
22.3
28.3
31.3
36.6
43.0
29.9
36.6
44.5
44.5
44.5
56.5
56.5
44.5
56.5
NOTE: Standard package is 1,000 pieces per reel.
2
T
ꢀ
Reel Dimensions
End portion
Mounting portion
Lead portion (400mm min.)
Blank portion
Blank portion
Top cover tape
Embossed carrier tape
(10 pocket min.)
(10 pocket min.)
71
Recommended Temperature Profile
B
5 sec. max.
250
200
150
100
50
240ç
200ç
Applicable Condition
Recommended Conditions
Reflow system
Solder
:IR reflow
160ç
150ç
:Paste type 63Sn/37Pb
(Flux content 11 wt%)
Test board
: Glass epoxy 40 x 80 x 1.6mm
Metal mask thickness : 0.15 mm
This temperature profile is a recommendation.
The temperature may be slightly changed according to the solder
paste type and amount.
(
30 sec.)
25ç
(20 to 30 sec.)
(60 sec.)
60 to 90 sec.
Preheating
Soldering
0
Start
60
120
180
Time (sec.)
72
BFH16 Series FPC Construction (Recommended Specifications)
1. Using Single-Sided FPC
Material Name
Covering layer film
Cover adhesive
Surface treatment
Copper foil
Material
Thickness (µm)
Polyamide 1 mil
25
25
Solder plating
5
Cu
1oz
35
Base adhesive
Base film
25
Polyamide 1 mil
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyamide 7 mil
Total
175
295
2. Using Double-Sided FPC
Material Name
Material
Thickness (µm)
Covering layer film
Cover adhesive
Surface treatment
Through hole copper
Copper foil
Polyamide 1 mil
25
25
5
Solder plating
Cu
15
18
18
25
18
18
25
25
50
100
299
Cu
1/2 oz
Base adhesive
Base film
Polyamide 1 mil
Base adhesive
Copper foil
Cu
1/2 oz
Cover adhesive
Cover layer film
Polyamide 1 mil
Reinforcement material adhesive Heat-hardened adhesive
Stiffener
Polyamide 1 mil
Total
Note : Stiffener is not required for the double-sided.
To prevent release of the lock due to FPC bending, please do not use copper foil on the rear side.
3. Precautions
1. This specification is a recommendation for the construction of the FH16 Series FPC (t=0.3 0.05).
2. The FH16 Series are connectors for thin FPC which is beginning to be used in cameras and other miniature equipment.
Stiffener is not required for double-sided FPC which will be reflected in FPC cost reduction.
Please note that in the case of single-sided FPC, stiffener is required, but the thickness dimension can be created easily.
For details about the construction, please contact the FPC/FFC manufacturer.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division
5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan
TEL:+81 3 5462 4191
FAX:+81 3 5462 4882
Fujikura Ltd. Electronics Global Marketing Department
1-5-1, Kiba, Koto-ku, Tokyo, Japan
TEL:+81 3 5606 1165
FAX:+81 3 5606 1530
NOK Corporation Sales Division Overseas Business Department
1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan
TEL:+81 3 3432 6976/8415
FAX:+81 3 3432 3919
73
相关型号：
FH16H-H
Board Connector, 16 Contact(s), 1 Row(s), Female, 0.049 inch Pitch, Crimp Terminal, Locking, White Insulator, Plug
AUK
FH16M-80S-0.4SHW(05)
Card Edge Connector, 80 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH16M-96S-0.4SHW(05)
Card Edge Connector, 96 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
FH16P-64S-0.5SHW(05)
Card Edge Connector, 64 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明