GRF2013-W [GUERRILLA]
Broadband Linear Gain Block 0.05 to 8.0 GHz;型号: | GRF2013-W |
厂家: | Guerrilla RF |
描述: | Broadband Linear Gain Block 0.05 to 8.0 GHz |
文件: | 总14页 (文件大小:846K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
Product Description
GRF2013-W is a broadband gain block with low noise
figure and high linearity designed for small cell, wireless
infrastructure and other high performance applications.
It exhibits outstanding broadband NF, linearity and re-
turn losses over 0.7 to 3.8 GHz with a single match.
Optimizing the bias inductor and coupling caps for lower
frequency operation will yield strong performance down
to 50 MHz. For applications above 4 GHz, the addition
of simple external matching yields outstanding linearity
and gain performance up to 8 GHz.
Features
Reference: 5V/90mA/1.9 GHz
• Gain: 18.5 dB
• OIP3: 38.5 dBm
• OP1dB: 22.5 dBm
• NF: 1.3 dB
The device is operated from a supply voltage of 2.7 to
8.0V with a selectable Iddq range of 15 to 100 mA for
optimal efficiency and linearity.
Consult with the GRF applications engineering team for
custom tuning/evaluation board data. De-embedded s-
parameters are available on the website landing page
for the device.
• Tested to AEC-Q100 Grade 2
• Flexible Biasing
• Internally Matched to 50Ω
• Process: GaAs pHEMT
• Applications
• Compensators
• Small Cells and Cellular Repeaters
• 802.11ac
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
1
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
Absolute Ratings:
Parameter
Symbol
Min.
0
Max.
9.0
Unit
V
Supply Voltage
VDD
RF Input Power: (Load VSWR < 2:1; VD: <= 8.0 volts)
Operating Temperature (Package Heat Sink)
PIN MAX
TAMB
22
dBm
°C
-40
105
170
Maximum Channel Temperature
> 10^6 Hours)
(MTTF
TMAX
°C
Maximum Dissipated Power
Electrostatic Discharge:
Charged Device Model:
Human Body Model:
Storage:
PDISS MAX
1.0
W
CDM
HBM
1500
250
V
V
Storage Temperature
TSTG
-65
150
1
°C
--
Moisture Sensitivity Level
MSL
Cauꢀon! ESD Sensiꢀve Device
Exceeding Absolute Maximum Raꢀng condiꢀons may cause permanent damage to the device.
Note: For manufacturing informaꢀon, see the Guerrilla-RF.com website for the following docu-
ment located on the GRF2013-W landing page: Manufacturing Note—MN-001 Product Tape and
Reel, Solderability and Package Outline Specificaꢀon:
Link to manufacturing note
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
2
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
Pin Out (Top View)
Pin Assignments:
Pin
Name
Description
Enable Voltage Input
Note
VENABLE and series resistor set IDDQ. VENABLE < 0.2 volts disables device. On-
VENABLE
1
die pull-down resistor will turn the part off if this node is allowed to float.
No Connect or Ground
LNA RF input
No internal connection to die
NC
2
3
4
5
6
RF_In
RF_Out
NC
Internally matched 50Ω. An external DC blocking cap must be used.
LNA RF output
Internally matched 50Ω. VDD must be applied through a choke to this pin
No Connect or Ground
No Connect or Ground
Ground
No internal connection to die
No internal connection to die
NC
Provides DC and RF ground for LNA, as well as thermal heat sink. Recom-
mend multiple 8 mil vias beneath the package for optimal RF and thermal
performance. Refer to evaluation board top layer graphic on schematic
page.
GND
PKG
BASE
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
3
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
Nominal Operating Parameters:
Specification
Parameter
Symbol
Unit
Condition
Min.
Typ.
Max.
Test Frequency
Gain
FTEST
S21
NF
1.9
GHz
dB
VDD = 5.0 V, TA = 25°C
17.5
18.5
1.3
Evaluation Board Noise Figure
Output 3rd Order Intercept
1.5
dB
OIP3
38.5
dBm
4.0 dBm POUT per tone (1899 and
1901 MHz)
Output 1dB Compression Power
Switching Rise Time
OP1dB
TRISE
21.0
22.5
500
500
dBm
ns
Switching Fall Time
TFALL
ns
Supply Current
Enable Current
Disabled Mode
IDD
90.0
5.0
mA
mA
IENABLE
100
52
Leakage Current
ILEAKAGE
uA
VDD: 5.0V; VENABLE: 0.0V
Thermal Data
Thermal Resistance: (Infra-Red Scan)
Qjc
ᵒC/W On standard Evaluation Board
Channel Temperature @ +85 C Reference
(Package heat sink)
TCHANNEL
109
(See note)
ᵒC
VDD: 5.0 V; IDDQ: 90 mA; No RF;
PDISS: 450 mW
Note: MTTF >10^6 hours for TCHANNEL < 170 degrees C.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
4
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
GRF2013-W Evaluation Board Measured Data: (0.7 to 3.8 GHz Tune)
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
5
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
GRF2013-W Evaluation Board Data: (0.7 to 3.8 GHz Tune)
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
6
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
GRF2013-W Evaluation Board S-Pars: (0.7 to 3.8 GHz Tune)
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
7
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
GRF2013-W Evaluation Board Stability Mu/Mu Prime Factors: (0.7 to 3.8 GHz Tune)
Note: Mu >= 1.0 implies unconditional stability.
Note: Mu Prime >= 1.0 implies unconditional stability.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
8
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
GRF2013-W Application Schematic
GRF2013-W Evaluation Board Assembly Diagram
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
9
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
GRF2013-W Standard Evaluation Board BOM: (0.7 to 3.8 GHz Tune)
Component
Type
Manufacturer
Family
Value
Package Size
Subsꢀtuꢀon
M2
M5 (See curves)
M8
Capacitor
Resistor
Murata
Various
Murata
Various
Murata
GRM
5%
100 pF
Sets Iddq
0.1 uF
0402
0402
0402
0402
0402
ok
ok
ok
ok
ok
Capacitor
GRM
MLC
GRM
M10
Inductor
33 nH
M12
Capacitor
100 pF
Evaluaꢀon Board
GRF400X_RevC
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
10
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
1.5 mm DFN-6 Suggested PCB Footprint (Top View)
1.5 mm DFN-6 Package Dimensions
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
11
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
Tape and Reel Information:
Guerrilla RF’s Tape and Reel specification complies with the Electronics Industries Association (EIA)
standards for ‘Embossed Carrier Tape of Surface Mount Components for Automatic Handling”. Reference
EIA-481. See the table on the following page for Tape and Reel specifications along with units per reel.
Devices are loaded with pins down into the carrier pocket with protective cover tape, wound into a plastic
reel. Each reel will be packaged in a cardboard box. There will be product labels on the reel, the protec-
tive ESD bag and the outside surface of the box.
Tape and Reel Packaging with Reel Diameter Noted (D)
Carrier Tape Width (W), Pitch (P), Feed Direction and Pin 1 Quadrant Information
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
12
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
Tape and Reel Specification and Device Package Information Table
Package Carrier Tape
Reel
Type
Dimensions
(mm)
Leads
Weight
(mg)
Width (W) Pocket Pitch (P) Pin 1 Quad- Diameter (D)
Units per
Reel
rant
(mm)
(mm)
(inches)
QFN 2.0 x 2.0 x 0.50
QFN 3.0 x 3.0 x 0.85
DFN 1.5 x 1.5 x 0.45
DFN 2.0 x 2.0 x 0.75
LFM 3.5 x 3.5 x 0.75
12
16
6
7
24
4
8
4
Q1
7
2500
1500
2500
2500
1500
12
8
8
4
4
8
Q1
Q1
Q1
Q2
7
7
7
7
8
12
TBD
8
See
12
note
LFM 4.0 x 4.0 x 0.75
See
TBD
12
8
Q2
7
1500
note
Note: Lead count may vary. Reference applicable product data sheet
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
13
GRF2013-W
Released
Broadband Linear Gain Block
0.05 to 8.0 GHz
Data Sheet Release Status:
Advance
Notes
S-parameter and NF data based on EM simulations for the fully packaged device
using foundry supplied transistor s-parameters. Linearity estimates based on de-
vice size, bias condition and experience with related devices.
All data based on evaluation board measurements in the Guerrilla RF Applications
Lab.
Preliminary
Released
All data based on device qualification data. Typically, this data is nearly identical to
the data found in the preliminary version. Max and min values for key RF parame-
ters are included.
Informaꢀon in this datasheet is specific to the Guerrilla RF, Inc. (“Guerrilla RF”) product idenꢀfied.
This datasheet, including the informaꢀon contained in it, is provided by Guerrilla RF as a service to its customers and may be used for informaꢀonal purposes
only by the customer. Guerrilla RF assumes no responsibility for errors or omissions on this datasheet or the informaꢀon contained herein. Informaꢀon provided
is believed to be accurate and reliable, however, no responsibility is assumed by Guerrilla RF for its use, nor for any infringement of patents, or other rights of
third parꢀes, resulꢀng from its use. Guerrilla RF assumes no liability for any datasheet, datasheet informaꢀon, materials, products, product informaꢀon, or other
informaꢀon provided hereunder, including the sale, distribuꢀon, reproducꢀon or use of Guerrilla RF products, informaꢀon or materials.
No license, whether express, implied, by estoppel, by implicaꢀon or otherwise is granted by this datasheet for any intellectual property of Guerrilla RF, or any
third party, including without limitaꢀon, patents, patent rights, copyrights, trademarks and trade secrets. All rights are reserved by Guerrilla RF.
All informaꢀon herein, products, product informaꢀon, datasheets, and datasheet informaꢀon are subject to change and availability without noꢀce. Guerrilla RF
reserves the right to change component circuitry, recommended applicaꢀon circuitry and specificaꢀons at any ꢀme without prior noꢀce. Guerrilla RF may further
change its datasheet, product informaꢀon, documentaꢀon, products, services, specificaꢀons or product descripꢀons at any ꢀme, without noꢀce. Guerrilla RF
makes no commitment to update any materials or informaꢀon and shall have no responsibility whatsoever for conflicts, incompaꢀbiliꢀes, or other difficulꢀes
arising from any future changes.
GUERRILLA RF INFORMATION, PRODUCTS, PRODUCT INFORMATION, DATASHEETS AND DATASHEET INFORMATION ARE PROVIDED “AS IS” AND WITHOUT WAR-
RANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY,
PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. GUER-
RILLA RF DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATE-
RIALS. GUERRILLA RF SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSE-
QUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFOR-
MATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Customers are solely responsible for their use of Guerrilla RF products in the Customer’s products and applicaꢀons or in ways
which deviate from Guerrilla RF’s published specificaꢀons, either intenꢀonally or as a result of design defects, errors, or opera-
ꢀon of products outside of published parameters or design specificaꢀons. Customers should include design and operaꢀng safe-
guards to minimize these and other risks. Guerrilla RF assumes no liability or responsibility for applicaꢀons assistance, customer
product design, or damage to any equipment resulꢀng from the use of Guerrilla RF products outside of stated published specifi-
caꢀons or parameters.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 09/09/19
Products and product specifications subject to change without notice
14
相关型号:
©2020 ICPDF网 联系我们和版权申明