GRF2004 [GUERRILLA]
Broadband Gain Block 0.1 to 10.0 GHz;型号: | GRF2004 |
厂家: | Guerrilla RF |
描述: | Broadband Gain Block 0.1 to 10.0 GHz |
文件: | 总11页 (文件大小:711K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
Product Description
GRF2004 is a broadband, low noise linear gain block
designed for small cell, wireless infrastructure and other
high performance RF applications. Due the extreme
broadband nature of the device, data is presented for
wideband RF measurements using network analyzer bi-
as Tees. Under these conditions, the device exhibits
good performance over 100 MHz to 10 GHz with mini-
mal external components.
Features
The device can be operated over a range of supply volt-
ages from 1.8 to 5.0 V selectable Iddq for optimal effi-
ciency and linearity.
Reference: 5V/100mA/4.0 GHz
• Gain: 16.5 dB
Consult with the GRF applications engineering team for
custom tuning/evaluation board data and device s-
parameters.
• OP1dB: 18.0 dBm
• OIP3: 31.0 dBm
•
Eval Board NF: 1.9 dB
• Flexible Bias Voltage and Current
• Internally Matched to 50 Ω
• Process: GaAs pHEMT
Applications
• Microwave Backhaul
• C/X-Band Amplifiers
• General Purpose Amplifiers
• Instrumentation
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
1
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
Absolute Ratings:
Parameter
Symbol
Min.
0
Max.
6.0
Unit
V
Supply Voltage
VDD
RF Input Power: (Load VSWR < 2:1; VD: 5.0 volts)
RF Input Power: (Load VSWR < 2:1; VD: <4.0 volts)
Operating Temperature (Package Heat Sink)
PIN MAX
PIN MAX
TAMB
15
20
dBm
dBm
°C
-40
105
170
Maximum Channel Temperature
(MTTF > 10^6 Hours)
TMAX
°C
Maximum Dissipated Power
Electrostatic Discharge:
Charged Device Model:
Human Body Model:
Storage:
PDISS MAX
600
mW
CDM
HBM
1500
250
V
V
Storage Temperature
Moisture Sensitivity Level
TSTG
-65
150
1
°C
--
MSL
Cauꢀon! ESD Sensiꢀve Device
Exceeding Absolute Maximum Raꢀng condiꢀons may cause permanent damage to the device.
Note: For manufacturing informaꢀon, see the Guerrilla-RF.com website for the following docu-
ment located on the GRF2004 landing page: Manufacturing Note—MN-001 Product Tape and
Reel, Solderability and Package Outline Specificaꢀon.
Link to manufacturing note
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
2
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
Pin Out (Top View)
Pin Assignments:
Pin
Name
Description
Note
Enable Voltage Input
VENABLE and series resistor set IDDQ. VENABLE < 0.2 volts disables device. On-
VENABLE
1
2
3
4
5
6
die pull-down resistor will turn the part off if this node is allowed to float.
No Connect or Ground
LNA RF input
No internal connection to die
NC
RF_In
RF_Out/VDD
NC
Internally matched 50Ω. An external DC blocking cap must be used.
LNA RF output
Internally matched 50Ω. VDD must be applied through a choke to this pin
No Connect or Ground
No Connect or Ground
Ground
No internal connection to die
No internal connection to die
NC
Provides DC and RF ground for LNA, as well as thermal heat sink. Recom-
mend multiple 8 mil vias beneath the package for optimal RF and thermal
performance. Refer to evaluation board top layer graphic on schematic
page.
GND
PKG
BASE
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
3
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
Nominal Operating Parameters:
Specification
Parameter
Symbol
Unit
Condition
Min.
Typ.
Max.
Test Frequency
Gain
FTEST
S21
NF
4.0
GHz
dB
VDD = 5.0 V, TA = 25°C
15.0
16.5
1.9
Evaluation Board Noise Figure
Output 3rd Order Intercept
Output 1dB Compression Point
Switching Rise Time
dB
OIP3
OP1dB
TRISE
TFALL
IDD
31.0
18.0
800
600
100
dBm
dBm
ns
0.0 dBm POUT per tone at 2 MHz
Spacing (3999 and 4001 MHz)
16.0
Switching Fall Time
ns
Supply Current
mA
Enable Current
IENABLE
1.8
1
mA
uA
Leakage Current
ILEAKAGE
VDD: 5.0V; VENABLE: 0.0V
Thermal Data
Thermal Resistance: (Infra-Red Scan)
104
ᵒC/W On standard Evaluation Board
jc
Channel Temperature @ +85 C Reference
(Package heat sink)
TCHANNEL
137
(See note)
ᵒC
VDD: 5.0 V; IDDQ: 100 mA; No RF;
PDISS: 500 mW
Note: MTTF >10^6 hours for TCHANNEL < =170 degrees C.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
4
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
GRF2004 Evaluation Board Measured Data: (0.1 to 10.0 GHz Bias T Measurements)
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
5
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
GRF2004 Evaluation Board Measured Data: (0.1 to 10.0 GHz Bias T Measurements)
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
6
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
GRF2004 Evaluation Board S-Pars and Stability Mu Factor: (0.1 to 10.0 GHz VNA Bias Ts)
Note: Mu factor >= 1.0 implies unconditional stability.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
7
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
GRF2004 Application Schematic (0.1 to 10.0 GHz Eval Board)
C_Opt
GRF2004 Evaluation Board Assembly Drawing
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
8
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
GRF2004 Evaluation Board BOM for VNA S-parameter measurement
Component
Type
Manufacturer
Family
Value
Package Size Subsꢀtuꢀon
M1
M3 (See curves)
C1
Capacitor
Resistor
Murata
Various
Murata
GRM
5%
1000 pF
Sets Iddq
0.2 pF
0402
0402
0402
ok
ok
ok
Capacitor
GJM
Evaluaꢀon
Board
GRF20XX_RevB
—
—
—
—
—
Note: C1 is added to test board input to enhance high frequency gain of the device.
Bias Resistor Selection Curves
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
9
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
1.5 mm DFN-6 Suggested PCB Footprint (Top View)
1.5 mm DFN-6 Package Dimensions
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
10
GRF2004
Released
Broadband Gain Block
0.1 to 10.0 GHz
Data Sheet Release Status:
Advance
Notes
S-parameter and NF data based on EM simulations for the fully packaged device
using foundry supplied transistor s-parameters. Linearity estimates based on de-
vice size, bias condition and experience with related devices.
All data based on evaluation board measurements in the Guerrilla RF Applications
Lab.
Preliminary
Released
All data based on device qualification data. Typically, this data is nearly identical to
the data found in the preliminary version. Max and min values for key RF parame-
ters are included.
Informaꢀon in this datasheet is specific to the Guerrilla RF, Inc. (“Guerrilla RF”) product idenꢀfied.
This datasheet, including the informaꢀon contained in it, is provided by Guerrilla RF as a service to its customers and may be used for informaꢀonal purposes
only by the customer. Guerrilla RF assumes no responsibility for errors or omissions on this datasheet or the informaꢀon contained herein. Informaꢀon provided
is believed to be accurate and reliable, however, no responsibility is assumed by Guerrilla RF for its use, nor for any infringement of patents, or other rights of
third parꢀes, resulꢀng from its use. Guerrilla RF assumes no liability for any datasheet, datasheet informaꢀon, materials, products, product informaꢀon, or other
informaꢀon provided hereunder, including the sale, distribuꢀon, reproducꢀon or use of Guerrilla RF products, informaꢀon or materials.
No license, whether express, implied, by estoppel, by implicaꢀon or otherwise is granted by this datasheet for any intellectual property of Guerrilla RF, or any
third party, including without limitaꢀon, patents, patent rights, copyrights, trademarks and trade secrets. All rights are reserved by Guerrilla RF.
All informaꢀon herein, products, product informaꢀon, datasheets, and datasheet informaꢀon are subject to change and availability without noꢀce. Guerrilla RF
reserves the right to change component circuitry, recommended applicaꢀon circuitry and specificaꢀons at any ꢀme without prior noꢀce. Guerrilla RF may further
change its datasheet, product informaꢀon, documentaꢀon, products, services, specificaꢀons or product descripꢀons at any ꢀme, without noꢀce. Guerrilla RF
makes no commitment to update any materials or informaꢀon and shall have no responsibility whatsoever for conflicts, incompaꢀbiliꢀes, or other difficulꢀes
arising from any future changes.
GUERRILLA RF INFORMATION, PRODUCTS, PRODUCT INFORMATION, DATASHEETS AND DATASHEET INFORMATION ARE PROVIDED “AS IS” AND WITHOUT WAR-
RANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY,
PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. GUER-
RILLA RF DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATE-
RIALS. GUERRILLA RF SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSE-
QUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFOR-
MATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Customers are solely responsible for their use of Guerrilla RF products in the Customer’s products and applicaꢀons or in ways which deviate from Guerrilla RF’s
published specificaꢀons, either intenꢀonally or as a result of design defects, errors, or operaꢀon of products outside of published parameters or design specifica-
ꢀons. Customers should include design and operaꢀng safeguards to minimize these and other risks. Guerrilla RF assumes no liability or responsibility for applica-
ꢀons assistance, customer product design, or damage to any equipment resulꢀng from the use of Guerrilla RF products outside of stated published specificaꢀons
or parameters.
Guerrilla RF Proprietary Information. Guerrilla RFTM and the composite logo of Guerrilla RFTM are trademarks of Guerrilla RF, Inc. ©2014 Guerrilla RF, Inc. All rights reserved.
Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com
Revision Date: 08/19/19
11
相关型号:
©2020 ICPDF网 联系我们和版权申明