050-358C2-1D-3539 [GLENAIR]
Transmitter,;型号: | 050-358C2-1D-3539 |
厂家: | Glenair |
描述: | Transmitter, |
文件: | 总18页 (文件大小:1452K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
050-358
PRODUCT BRIEF
SMPTE HD-SDI
PC BOARD MOUNT DUAL-TRANSMITTER
TWO (2) CWDM TRANSMITTERS
SMALL & COMPACT WITH RUGGED CONSTRUCTION FOR
HARSH ENVIRONMENTS
REV DESCRIPTION
DATE
APPROVED
2
3
4
5
6
7
8
9
10
11
12
13
Preliminary
Add ECCN
Removed 3G-SDI
Edit Bag and Tag Labeling
Remove incorrect reference to ATMEL AT240C01A, added optional I2C addressing
Remove reference to 3G-SDI
Add 3G-SDI option
Update maximum operating current
Increase Output Power limit
Update pictures
06/15/2015
05/26/2016
07/07/2016
12/13/2016
02/28/2017
05/23/2017
07/06/2017
07/12/2018
09/04/2018
09/26/2018
11/8/2018
SZ
RAS
RAS
RAS/GC
RAS/GC
RAS/GC
RAS/SZ/GC
RAS/SZ/GC
RAS/SZ
RAS/GC
RAS/SZ
RAS/SZ
Added Low Power options for non-CWDM low loss links
Remove 3G-SDI as an option for the 050-358 product
1/21/2019
BF15U2-3100
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
PCB Mount CWDM Fiber Optic Dual-Transmitter, HD-SDI, SMF, 3.3V
Glenair 050-358, is a ruggedized harsh environment PC Board Mount Dual-
transmitter with electrical and optical functionality similar to transmitters in SFP
transceivers but with mechanical design that is suited to the harsh temperature and
vibration environments found in Military, Aerospace, Railway, Oil and Gas, and
Industrial applications. The board mount optical dual-transmitters also support Digital
Monitoring Interface (DMI) features in accordance with SFF 8472. The dual-transmitter
interfaces with a host board through a high speed electrical connector.
Each transmitter includes a Transmitter Optical Subassembly (TOSA) and
laser driver circuitry. The TOSA incorporates ITU CWDM wavelength DFB lasers to
convert electrical signals to fiber optic signals; the output of the TOSA mates with the
GC optical connector. This laser driver circuit regulates the optical power at a constant
level provided the data pattern is relatively DC balanced and can support SMPTE EG
34:2004 Pathological conditions CASE 1, CASE2, and CASE 3 for HD-SDI.
KEY FEATURES/BENEFITS
.
SMPTE EG 34:2004
Conditions CASE 1, CASE 2 and CASE 3.
SMPTE ST 297:2006 (HD-SDI)
Compliant to Pathological
.
.
.
Compact size: ~ 0.8” x 0.9” x 0.5”
-40°C to +85°C Operating Case Temperature
Glenair fiber jumpers, FA02454, connect from
dual-transmitter to any Glenair Mil/Aero Fiber
Optic Connector
Evaluation fixtures available
Digital Diagnostic and Monitoring (DMI) based on
SFF-8472, enables monitoring of:
.
.
.
.
.
SMPTE 292 Compliant (HD-SDI)
SFP Compatible Electrical Input signal levels
CWDM DFB Lasers to support HD-SDI
Glenair Rugged GC Optical connector withstand
high shock and vibration
.
.
.
.
.
Dual-transmitter is securely mounted with screws
to PCB to ensure excellent shock and vibration
performance
High-Speed Electrical plug-in connector
eliminates the need for soldering & enables ease
of servicing
o
TX optical power for each channel, Laser
bias current, Temperature, Supply
Voltage
APPLICATIONS
.
Harsh Environment such as: Airborne, Tactical,
Railway, Industrial, Oil and Gas and Shipboard
applications
Captive screws to simplify assembly operations
o
SMPTE HD-SDI Video Applications
Part Number Two Wire Address
Data Rate
TX #1
TX #2
Screw Length (Mod Code)
Blank = Standard
Wavelength
-27 = 1271nm
-29 = 1291nm
-31 = 1311nm
-33 = 1331nm
-35 = 1351nm
-37 = 1371nm
-39 = 1391nm
-41 = 1411nm
Wavelength
27 = 1271nm
29 = 1291nm
31 = 1311nm
33 = 1331nm
35 = 1351nm
37 = 1371nm
39 = 1391nm
41 = 1411nm
050-358
Blank = A2h, A4h
Other Options:
-1D = HD-SDI
PCB Mount
-954-xxx – IAW Mod Code 954
CWDM Dual- See Table 1A
Transmitter,
SMF
-3D = HD-SDI
(low power)
Example: 050-358C2-1D-2729
PCB Mount CWDM Dual-Transmitter, SMF, 1271nm & 1291nm, Two Wire Address = C2h & C4h, Data Rate = HD-SDI
Standard Temperature Range, Standard Screw Length
**Temperature and Screw Length Mod Codes will not be added onto Digital Memory ID (See Table 9)
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 2 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
TABLE 1A TWO WIRE ADDRESS –IDENTIFIER OPTIONS
Transceiver #1
Transceiver #2
Address
A4h
PN Identifier
Address
Blank
A6
A2h
A6h
A8h
B2
B2h
B4h
B6
B6h
B8h
C2
C6
D2
D6
E2
C2h
C6h
D2h
D6h
E2h
C4h
C8h
D4h
D8h
E4h
E6
E6h
E8h
Contact Glenair if additional addresses required
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
Printed in USA
∙
1211 AIR WAY
∙
GLENDALE, CA 91201-2497
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
PAGE 3 of 18
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Ratings and Specifications
TABLE 2 ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Min
Typ
Max
Units
Notes
Storage Temperature
Supply Voltage
Ts
-55
+100
3.8
°C
V
Vcc
-0.4
VccT may not differ by more than
0.5V
TABLE 3 OPERATING CONDITIONS
Parameter
Symbol
Min
Typ
Max
Units
Notes
Operating Temperature, Case
Supply Voltage
Top
Vcc
-40
+85
3.465
300
°C
V
3.135
3.3
Supply Current
Icc
200
mA
mV
Typical @ 85°C
Power Supply Noise (Peak-Peak)
Vcc_ripple
100
TABLE 4 -A ELECTRO-OPTICAL CHARACTERISTICS – HD-SDI TRANSMITTER (050-358-1D)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical Output Power
Extinction Ratio
POUT
Er
-1
5
1.5
10
+5
dBm
dB
@ 1.485 Gbps
@ 1.485 Gbps
@ 1.485 Gbps
Optical Link Budget
19
dBm
Measured in combination with 050-
357 (Dual RX) and 050-358 (HD-
SDI CWDM Dual TX), Compliant
with SMPTE 292
Optical Wavelength, “27”, 1271 nm
Optical Wavelength, “29”, 1291 nm
Optical Wavelength, “31”, 1311 nm
Optical Wavelength, “33”, 1331 nm
Optical Wavelength, “35”, 1350 nm
Optical Wavelength, “37”, 1370 nm
Optical Wavelength, “39”, 1390 nm
Optical Wavelength, “41”, 1410 nm
Spectral Width, rms
λOUT
1261
1281
1301
1321
1341
1361
1381
1401
1271
1291
1311
1331
1351
1371
1391
1411
1278.5
1298.5
1318.5
1338.5
1358.5
1378.5
1398.5
1418.5
1
nm
Δλ
SMSR
RIN
TJ
nm
dB
Side Mode Suppression Ratio
Relative Intensity Noise
30
-117
1
dB/Hz
UI
Timing Jitter
SMPTE 292, 1.485 Gbps, Color bar
SMPTE 292, 1.485 Gbps, Color bar
AC coupled Internally
Alignment Jitter
AJ
0.2
UI
Transmitter Differential Input Impedance
Differential Input Voltage
Rin
100
Ohms
mVp-p
Vin_d
250
2200
CML, 100 ohm
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 4 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Ratings and Specifications (continued)
TABLE 4-B ELECTRO-OPTICAL CHARACTERISTICS – HD-SDI TRANSMITTER (050-358-3D “LOW POWER”)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical Output Power
Extinction Ratio
POUT
Er
-4.5
5
-2.5
10
+0.5
dBm
dB
@ 1.485 Gbps
@ 1.485 Gbps
@ 1.485 Gbps
Optical Link Budget
15.5
dBm
Measured in combination with 050-
357 (Dual RX) and 050-358 (HD-
SDI CWDM Dual TX), Compliant
with SMPTE 292
Optical Wavelength, “27”, 1271 nm
Optical Wavelength, “29”, 1291 nm
Optical Wavelength, “31”, 1311 nm
Optical Wavelength, “33”, 1331 nm
Optical Wavelength, “35”, 1350 nm
Optical Wavelength, “37”, 1370 nm
Optical Wavelength, “39”, 1390 nm
Optical Wavelength, “41”, 1410 nm
Spectral Width, rms
λOUT
1261
1281
1301
1321
1341
1361
1381
1401
1271
1291
1311
1331
1351
1371
1391
1411
1278.5
1298.5
1318.5
1338.5
1358.5
1378.5
1398.5
1418.5
1
nm
Δλ
SMSR
RIN
TJ
nm
dB
Side Mode Suppression Ratio
Relative Intensity Noise
30
-117
1
dB/Hz
UI
Timing Jitter
SMPTE 292, 1.485 Gbps, Color bar
SMPTE 292, 1.485 Gbps, Color bar
AC coupled Internally
Alignment Jitter
AJ
0.2
UI
Transmitter Differential Input Impedance
Differential Input Voltage
Rin
100
Ohms
mVp-p
Vin_d
250
2200
CML, 100 ohm
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 5 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Ratings and Specifications (continued)
TABLE 6 COMPLIANCE SPECIFICATIONS
CHARACTERISTIC
Standard
Condition
Notes
Mechanical Shock
MIL-STD-810
MIL-STD-810
Para. 516.6, proc. I, 650g
0.9 ms operating
Mechanical Vibration
Random, operating
Para. 514.6, 40g rms
ESD
MIL-STD-883
MIL-STD-1344
1000V HBM
Flame Resistance
Damp Heat
Eye Safety
Method 1012, Cond. B
Method 1002.2, Cond. B
Class 1 Laser Product
30 seconds
MIL-STD-1344
10 cycles , 24 hours
CDRH and IEC-825
TABLE 7 MATERIAL/FINISH
Item
PCB
Material/Finish
FR4
PCB flex
Railings
FR4 & Polyimide
Aluminum 6061-T6 per ASTM-B221/B211M or Equivalent
Screws
CRES Type, 302, 303, 304, 305, or 316
Optical Ferrules & Sleeves
Solder type
Zirconia, Ceramic
RoHS compliant Sn95/Sb5 (232°C melting temp) &
RoHS compliant Sn96.5/Ag3.0/Cu0.5 (217° melting)
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
1211 AIR WAY
US Cage Code 06324
Printed in USA
∙
∙
GLENDALE, CA 91201-2497
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
PAGE 6 of 18
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
FIGURE 1 - OUTLINE DRAWING CONTINUED (MARKING)
LABELING:
Each unit will be shipped in an antistatic bag. The label on the antistatic bag shall be at a minimum Arial size 10
black font and contain at a minimum the following information:
ANTISTATIC BAG LABEL:
Glenair
Cage Code: 06324
PN: 050-358XX-XX-XXXX
Rev: X
QTY: X
J/N: X
D/C:X
S/N*: XXXXXX
*If QTY is more than 1, there is no S/N
Each unit will be marked, either with a label or laser engraving, as follows:
1. Marking font to be Arial, greater than .08 inches in height.
2. Minimum Marking on each part will include the following:
Glenair
Serial number
Glenair Part Number
Example Minimum Marking:
GLENAIR SN123456
050-358C2-1D-2729
GLENAIR SN123456
050-358C2-1D-2729
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
Printed in USA
∙
1211 AIR WAY
∙
GLENDALE, CA 91201-2497
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
PAGE 7 of 18
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
FUNCTIONAL DESCRIPTION
Figure 2
PCB mount Dual-Transmitter Block Diagram
TRANSMITTER SECTION
Transmit Disable (TX1_Disable and TX2_Disable)
The transmitters accept a TTL and CMOS compatible transmit disable control signal input that shuts down the transmitter
optical output. A high signal disables the transmitter while a low signal allows normal dual-transmitter operation. Also laser
is disabled when TX Disable is open. In the event of a fault (e.g. eye safety circuit activated), cycling this control signal
resets the module. Host systems should allow a 10ms interval between successive assertions of this control signal.
Transmit Fault (TX1_FAULT and TX2_FAULT)
A catastrophic laser fault will activate the transmitter signal, TX*_FAULT, and disable the laser. This signal is an open
collector output (pull-up required on the host board). A low signal indicates normal laser operation and a high signal
indicates a fault. The TX*_FAULT will be latched high when a laser fault occurs and is cleared by toggling the
TX*_DISABLE input or cycling the power of the dual-transmitter. The transmitter fault condition can also be monitored via
the optional 2-wire serial interface (address A2, byte 110, bit 2).
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 8 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Eye Safety Circuit
The Transmitters provide Class 1 eye safety by design and are compliant with US FDA CDRH AEL Class 1 and EN(IEC)
60825-1,2, EN60950 Class 1. The eye safety circuit continuously monitors optical output power levels and will disable the
transmitter and assert a TX_FAULT signal upon detecting an unsafe condition. Such unsafe conditions can be created by
inputs from the host board (Vcc fluctuation, unbalanced code) or faults within the module.
FUNCTIONAL I/O
The PC board mount dual-transmitter accepts industry standard differential signals such as LVPECL and CML within the
scope of the SFP MSA. To simplify board requirements, transmitter bias resistors and ac coupling capacitors are
incorporated, per SFF-8074i, and hence are not required on the host board. The module is AC-coupled and internally
terminated.
Figure 3 illustrates a recommended interface circuit to link the PC board mount dual-transmitter to the supporting Physical
Layer integrated circuits.
The PC board mount dual-transmitter interfaces with the host circuit board through twenty I/O pins identified by function in
Table 8. The dual-transmitter high speed transmit and receive interfaces require SFP MSA compliant signal lines on the
host board. The TX1_DISABLE, TX2_DISABLE, TX1_FAULT and TX2_FAULT require TTL lines on the host board (per
SFF-8074i) if used. If an application chooses not to take advantage of the functionality of these pins TX1_Disable and
TX2_Disable need to be tied to GND, TX1_Fault, TX2_Fault do not need to be connected.
.
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 9 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
FIGURE 3
RECOMMENDED BOARD MOUNT DUAL-TRANSMITTER HOST BOARD SCHEMATIC
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 10 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Digital Diagnostic Interface and Serial Identification (EEPROM)
The PCB mount Dual-Transmitter is derived from the SFF-8074i SFP specification and with SFF-8472, the SFP
specification for Digital Diagnostic Monitoring Interface, but modified to account for Dual-Transmitter functionality. Both
specifications can be found at http://www.sffcommittee.org.
FIGURE 4 – DIGITAL DIAGNOSTIC MEMORY MAP OVERVIEW
A0h (Standard Serial ID Data Address)
Other Dynamic Data Addresses available – see Part Number Development Options (Table 1 and Table 1A)
The PCB mount Dual-Transmitter features EEPROM for Serial ID, which contains the product data stored for retrieval by
host equipment. This data is accessed via the 2-wire serial EEPROM protocol derived from with the industry standard
SFP Multi-Source Agreement but modified to account for Dual-Transmitter functionality. The base EEPROM memory,
bytes 0-255 at memory address A0h, is organized in compliance with SFF-8074i.
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 11 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Predictive Failure Identification
The predictive failure feature allows a host to identify potential link problems before system performance is impacted. Prior
identification of link problems enables a host to service an application via “fail over” to a redundant link or replace a
suspect device, maintaining system uptime in the process. For applications where ultra-high system uptime is required,
the PCB mount Transceiver provides a means to monitor two real-time laser metrics associated with observing laser
degradation and predicting failure: average laser bias current (TX_Bias) and average laser optical power (TX_Power).
Compliance Prediction
Compliance prediction is the ability to determine if an optical transceiver is operating within its operating and
environmental requirements. The PCB mount Transceiver provide real-time access to transceiver internal supply voltage
and temperature, allowing a host to identify potential component compliance issues. Received optical power is also
available to assess compliance of fiber cable plant and remote transmitter. When operating out of requirements, the link
cannot guarantee error free transmission.
Fault Isolation
The fault isolation feature allows a host to quickly pinpoint the location of a link failure, minimizing downtime. For optical
links, the ability to identify a fault at a local device, remote device or cable plant is crucial to speeding service of an
installation. PCB mount Transceiver real-time monitors of TX_Bias, TX_Power, Vcc, and Temperature can be used to
assess local transceiver current operating conditions.
Component Monitoring
Component evaluation is another use of the PCB mount Transceiver real-time monitors of TX_Bias, TX_Power, Vcc, and
Temperature. Potential uses are as debugging aids for system installation and design, and transceiver parametric
evaluation for factory or field qualification. For example, temperature per module can be observed in high density
applications to facilitate thermal evaluation of systems that incorporate this PCB mount transceiver
Required Host Board Components
A power supply noise rejection filter as describe in SFP MSA is required on the host PCB to meet data sheet
performance. This is filter incorporates an inductor which should be rated to 400 mADC and 1 Ω series resistance or
better. It should not be replaced with a ferrite. The required filter is illustrated in Figure 4. Also, the host PCB for the PCB
mount transceiver requires 4.7 K to 10 KΩ pull-up resistors for TX_FAULT, SCA and SDL lines.
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 12 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
FIGURE 4
RECOMMENDED HOST BOARD POWER SUPPLY FILTERING CIRCUIT
Fiber Compatibility
The transceiver is capable of transmission up to 10km with 9/125 μm fiber at 1.25Gbps data rate.
Electrostatic Discharge (ESD)
The Transceiver is compatible with ESD levels found in typical manufacturing and operating environments as described
JEDEC EIA JESD22-A114-A, Class 1 (<2000Volts) HBM. Glenair recommends that devices are handled with ESD
precautions to limit exposure to below 500V HBM.
There are two design cases in which immunity to ESD damage is important. The first case is during handling of the
transceiver prior to insertion to the host board. To protect the transceiver, it’s important to use standard industry ESD
handling precautions. These precautions include using grounded wrist straps, work benches, and floor mats in ESD
controlled areas. The ESD sensitivity of the Glenair PCB mount transceiver is compatible with typical industry production
environments.
The second case to consider is static discharges to the exterior of the host equipment after installation, in which case the
transceiver may be subject to system-level ESD requirements.
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 13 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Application Support
To assist in the transceiver design and evaluation process, Glenair offers the following aids:
Evaluation board & Product Manual, part number 050-329, which facilitates in the testing of the PCB mount
transceiver.
3D Step file to support modeling of mechanical fit and routing
PADS schematic and PCB layout library files that can be exported into customer’s PCB software design program
Applications Aid Example of PCB layout including details of high speed transmission designs
Customer Manufacturing Processes
This module is mounted with screws and interfaces with a high-speed low cost surface mount electrical connector residing
on the host PC board. The PCB mount transceiver is not designed for aqueous wash, IR reflow, or wave soldering
processes and should be mounted on the host board after host PC board has been through its assembly process.
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 14 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
TABLE 9
Byte
Decimal
TWO-WIRE INTERFACE ID: DATA FIELDS – ADDRESS A0h
#
Data
Byte
Decimal
37
#
Hex
Data
Notes
Hex
80
Notes
0
Glenair PCB mount Dual Transmitter
00
00
00
30
35
30
2D
33
35
38
43
32
2D
32
37
32
39
20
20
20
20
20
20
05
1E
Vendor OUI (NOT USED)
1
2
3
4
5
6
7
8
04
80
00
00
00
00
00
00
00
00
03
1E
00
00
64
00
00
00
00
47
4C
45
4E
41
49
52
20
Serial ID Module Definition
“GC” Fiber Optic Connector
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
Vendor OUI (NOT USED)
Vendor OUI (NOT USED)
“0” Vendor Part Number ASCII Character (Note 5)
“5” Vendor Part Number ASCII Character (Note 5)
“0” Vendor Part Number ASCII Character (Note 5)
“-“ Vendor Part Number ASCII Character (Note 5)
“3” Vendor Part Number ASCII Character (Note 5)
“5” Vendor Part Number ASCII Character (Note 5)
“8” Vendor Part Number ASCII Character (Note 5)
“C“ Vendor Part Number ASCII Character (Note 5)
“2” Vendor Part Number ASCII Character (Note 5)
“-“ Vendor Part Number ASCII Character (Note 5)
“2“ Vendor Part Number ASCII Character (Note 5)
“7“ Vendor Part Number ASCII Character (Note 5)
“2“ Vendor Part Number ASCII Character (Note 5)
“9“ Vendor Part Number ASCII Character (Note 5)
“ “ Vendor Part Number ASCII Character (Note 5)
“ “ Vendor Part Number ASCII Character (Note 5)
“ “ Vendor REV Level ASCII Character (Note 5)
“ “ Vendor REV Level ASCII Character (Note 5)
“ “ Vendor REV Level ASCII Character (Note 5)
“ “ Vendor REV Level ASCII Character (Note 5)
Hex Byte of Laser Wavelength (Note 6)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
NRZ
BR
9/125 µm Fiber, 10km @ 1.5 Gbps (Note 3)
“G” Vendor NAME ASCII Character
“L” Vendor NAME ASCII Character
“E” Vendor NAME ASCII Character
“N” Vendor NAME ASCII Character
“A” Vendor NAME ASCII Character
“I” Vendor NAME ASCII Character
“R” Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
“ “ Vendor NAME ASCII Character
Hex Byte of Laser Wavelength (Note 6)
RESERVED
Check sum code for ID fields 0-62 (Note 7)
00
18
00
00
20
20
20
20
20
20
20
20
00
Hardware TX_Disable, TX_Fault,
67
68-83
84-91
92
93
94
Serial Number, ASCII (Note 8)
Date Code (Note 9)
Diagnostic Monitoring Type
Enhanced Options
68
A0
05
SFF-8472 rev 11.0
95
Checksum for bytes 64-94 (Note 7)
96-255
00
Notes:
1. RESERVED
2. RESERVED
3. Link distance with 9/125μm cable at 1.5Gbps is 10km.
4. RESERVED
5. Table 1, Part number options/extensions. Temperature, Screw Length Mod Codes, and “1D-” will not be added onto Digital Memory ID.
6. Laser wavelength is represented in 16 unsigned bits. The hex representation of 1310 nm is 051E. The hex representation of 850nm is 0352.
7. Addresses 63 and 95 are checksums calculated per SFF-8472 and SFF-8074, and stored prior to product shipment.
8. Addresses 68-83 specify the module’s ASCII serial number and will vary by unit.
9. Addresses 84-91 specify the module’s ASCII date code and will vary according to manufactured date-code.
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 15 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
Table 10 Two-Wire interface ID: Data Fields – Address A2h (TX1), A4h (TX2) standard (or see Table 1A for other options)
NOTE: RX Data fields are not applicable in this table (i.e. Addresses 32-39 and 104-105)
Byte #
Data
Byte #
Data
Byte #
Data
Decimal
Notes
Decimal
Notes
Decimal
Notes
0
1
2
3
4
5
6
7
Temp H Alarm MSB (Note 1)
Temp H Alarm LSB (Note 1)
Temp L Alarm MSB (Note 1)
Temp L Alarm LSB (Note 1)
Temp H Warning MSB (Note 1)
Temp H Warning LSB (Note 1)
Temp L Warning MSB (Note 1)
Temp L Warning LSB (Note 1)
Vcc H Alarm MSB (Note 2)
26
27
28
29
30
31
32
33
104
105
106
107
108
109
110
111
Reserved
TX Pwr L Alarm MSB (Note 4)
TX Pwr L Alarm LSB (Note 4)
TX Pwr H Warning MSB (Note 4)
TX Pwr H Warning LSB (Note 4)
TX Pwr L Warning MSB (Note 4)
TX Pwr L Warning LSB (Note 4)
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Status/Control
Reserved
Reserved
Reserved
8
34
112
Flag Bits
9
Vcc H Alarm LSB (Note 2)
35
Reserved
113
Flag Bits
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Notes:
Vcc L Alarm MSB (Note 2)
Vcc L Alarm LSB (Note 2)
36
37
38
39
40-45
56-94
95
96
97
98
99
100
101
102
103
Reserved
Reserved
Reserved
Reserved
114
115
116
117
118
119
120-122
123
124
125
126
127
128-247
248-255
Reserved
Reserved
Flag Bits
Flag Bits
Vcc H Warning MSB (Note 2)
Vcc H Warning LSB (Note 2)
Vcc L Warning MSB (Note 2)
Vcc L Warning LSB (Note 2)
Tx Bias H Alarm MSB (Note 3)
Tx Bias H Alarm LSB (Note 3)
Tx Bias L Alarm MSB (Note 3)
Tx Bias L Alarm LSB (Note 3)
Tx Bias H Warning MSB (Note 3)
Tx Bias H Warning LSB (Note 3)
Tx Bias L Warning MSB (Note 3)
Tx Bias L Warning LSB (Note 3)
TX Pwr H Alarm MSB (Note 4)
TX Pwr H Alarm LSB (Note 4)
Reserved
Reserved
Reserved
Reserved
External Cal Constants (Note 6)
Checksum for bytes 0-94
Temperature MSB (Note 1)
Temperature LSB (Note 1)
Vcc MSB (Note 2)
Reserved
Reserved
Reserved
Reserved
Reserved (Note 8)
Customer Writable (Note 9)
Vendor Specific
Vcc LSB (Note 2)
TX Bias MSB (Note 3)
TX Bias LSB (Note 3)
TX Power MSB (Note 4)
TX Power LSB (Note 4)
1. Temperature (Temp) is decoded as a 16 bit signed twos compliment integer in increments of 1/256 °C.
2. Supply voltage (VCC) is decoded as a 16 bit unsigned integer in increments of 100 μV.
3. Laser bias current (Tx Bias) is decoded as a 16 bit unsigned integer in increments of 2 μA.
4. Transmitted average optical power (Tx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 μW.
5. Reserved
6. Bytes 56-94 are not intended from use but have been set to default values per SFF-8472.
7. Bytes 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment.
8. Byte 127 accepts a write but performs no action (reserved legacy byte).
9. Bytes 128-247 are write enabled (customer writable).
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 16 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
TABLE 11
PARAMETER
DIGITAL DIAGNOSTIC MONITOR CHARACTERISTICS (WHEN APPLICABLE)
SYMBOL
MIN.
UNITS
NOTES
Temperature is measured internal to the Dual Transmitter and is
valid from
-40°C to +85 °C case temperature
Dual Transmitter Internal Temperature
Accuracy
TINT
±3.0
°C
Supply voltage is measured internal to the Dual Transmitter and can,
with less accuracy, be correlated to the voltage at the Vcc pin. Valid
over 3.3V ±5%
Dual Transmitter internal Supply
Voltage accuracy
VINT
±0.1
V
Dual Transmitter Laser DC Bias Current
Accuracy
Dual Transmitter Average Optical
Output Power Accuracy
IINT
PT
±10
%
Coupled into 9/125 mm SM fiber.
Valid from -1dBm to -10dBm
±3.0
dB
©2015 Glenair, Inc.
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 17 of 18
Printed in USA
GLENAIR, INC.
www.glenair.com
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
050-358 PRODUCT BRIEF
PC Board Mount Dual-Transmitter
HD-SDI, SMF, 3.3V
ACCESSORIES
Fiber Optic Jumper Cables to support connection to Mil/Aerospace Connectors
KEY FEATURES:
Jumper cable between Glenair Transceiver (end A) and Mil/Aero Connector termini (End B)
Offered with either Multimode and Single Mode fibers
FIGURE 5
Fiber Optic Jumper Cable Assembly (see separate Glenair sales drawing FA02454 for details)
PCB Threaded Inserts, PN 059-0007
KEY FEATURES
Simplifies installation of PCB mount transceivers eliminating the need for washers and nuts
Soldered to PCB to eliminate need for handling nuts during assembly
Existing Options to support PCB thickness from 0.03” to 0.92”
Can support thicker PCB if required
EVALUATION Boards, PN 050-330, include
Manual with test block diagram, schematic and
Evaluation board PCBA
2 fiber optic cables (~1m, 9 μm/125 μm, GC connector to LC connector)
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 13
US Cage Code 06324
GLENDALE, CA 91201-2497
PAGE 18 of 18
Printed in USA
∙
1211 AIR WAY
∙
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: sales@glenair.com
相关型号:
©2020 ICPDF网 联系我们和版权申明