050-358D2-1D-3331_技术文档

050-358

PRODUCT BRIEF

SMPTE HD-SDI

PC BOARD MOUNT DUAL-TRANSMITTER

TWO (2) CWDM TRANSMITTERS

SMALL & COMPACT WITH RUGGED CONSTRUCTION FOR

HARSH ENVIRONMENTS

REV DESCRIPTION

DATE

APPROVED

2

3

4

5

6

7

8

9

10

11

12

13

Preliminary

Add ECCN

Removed 3G-SDI

Edit Bag and Tag Labeling

Remove incorrect reference to ATMEL AT240C01A, added optional I2C addressing

Remove reference to 3G-SDI

Add 3G-SDI option

Update maximum operating current

Increase Output Power limit

Update pictures

06/15/2015

05/26/2016

07/07/2016

12/13/2016

02/28/2017

05/23/2017

07/06/2017

07/12/2018

09/04/2018

09/26/2018

11/8/2018

SZ

RAS

RAS/GC

RAS/SZ/GC

RAS/SZ

RAS/GC

RAS/SZ

Added Low Power options for non-CWDM low loss links

Remove 3G-SDI as an option for the 050-358 product

1/21/2019

BF15U2-3100

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO

BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED

FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION

HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION

INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

PCB Mount CWDM Fiber Optic Dual-Transmitter, HD-SDI, SMF, 3.3V

Glenair 050-358, is a ruggedized harsh environment PC Board Mount Dual-

transmitter with electrical and optical functionality similar to transmitters in SFP

transceivers but with mechanical design that is suited to the harsh temperature and

vibration environments found in Military, Aerospace, Railway, Oil and Gas, and

Industrial applications. The board mount optical dual-transmitters also support Digital

Monitoring Interface (DMI) features in accordance with SFF 8472. The dual-transmitter

interfaces with a host board through a high speed electrical connector.

Each transmitter includes a Transmitter Optical Subassembly (TOSA) and

laser driver circuitry. The TOSA incorporates ITU CWDM wavelength DFB lasers to

convert electrical signals to fiber optic signals; the output of the TOSA mates with the

GC optical connector. This laser driver circuit regulates the optical power at a constant

level provided the data pattern is relatively DC balanced and can support SMPTE EG

34:2004 Pathological conditions CASE 1, CASE2, and CASE 3 for HD-SDI.

KEY FEATURES/BENEFITS

.

SMPTE EG 34:2004

Conditions CASE 1, CASE 2 and CASE 3.

SMPTE ST 297:2006 (HD-SDI)

Compliant to Pathological

.

Compact size: ~ 0.8” x 0.9” x 0.5”

-40°C to +85°C Operating Case Temperature

Glenair fiber jumpers, FA02454, connect from

dual-transmitter to any Glenair Mil/Aero Fiber

Optic Connector

Evaluation fixtures available

Digital Diagnostic and Monitoring (DMI) based on

SFF-8472, enables monitoring of:

.

SMPTE 292 Compliant (HD-SDI)

SFP Compatible Electrical Input signal levels

CWDM DFB Lasers to support HD-SDI

Glenair Rugged GC Optical connector withstand

high shock and vibration

.

Dual-transmitter is securely mounted with screws

to PCB to ensure excellent shock and vibration

performance

High-Speed Electrical plug-in connector

eliminates the need for soldering & enables ease

of servicing

o

TX optical power for each channel, Laser

bias current, Temperature, Supply

Voltage

APPLICATIONS

.

Harsh Environment such as: Airborne, Tactical,

Railway, Industrial, Oil and Gas and Shipboard

applications

Captive screws to simplify assembly operations

o

SMPTE HD-SDI Video Applications

Part Number Two Wire Address

Data Rate

TX #1

TX #2

Screw Length (Mod Code)

Blank = Standard

Wavelength

-27 = 1271nm

-29 = 1291nm

-31 = 1311nm

-33 = 1331nm

-35 = 1351nm

-37 = 1371nm

-39 = 1391nm

-41 = 1411nm

Wavelength

27 = 1271nm

29 = 1291nm

31 = 1311nm

33 = 1331nm

35 = 1351nm

37 = 1371nm

39 = 1391nm

41 = 1411nm

050-358

Blank = A2h, A4h

Other Options:

-1D = HD-SDI

PCB Mount

-954-xxx – IAW Mod Code 954

CWDM Dual- See Table 1A

Transmitter,

SMF

-3D = HD-SDI

(low power)

Example: 050-358C2-1D-2729

PCB Mount CWDM Dual-Transmitter, SMF, 1271nm & 1291nm, Two Wire Address = C2h & C4h, Data Rate = HD-SDI

Standard Temperature Range, Standard Screw Length

**Temperature and Screw Length Mod Codes will not be added onto Digital Memory ID (See Table 9)

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 2 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

TABLE 1A TWO WIRE ADDRESS –IDENTIFIER OPTIONS

Transceiver #1

Transceiver #2

Address

A4h

PN Identifier

Address

Blank

A6

A2h

A6h

A8h

B2

B2h

B4h

B6

B6h

B8h

C2

C6

D2

D6

E2

C2h

C6h

D2h

D6h

E2h

C4h

C8h

D4h

D8h

E4h

E6

E6h

E8h

Contact Glenair if additional addresses required

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

Printed in USA

∙

1211 AIR WAY

∙

GLENDALE, CA 91201-2497

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

PAGE 3 of 18

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Ratings and Specifications

TABLE 2 ABSOLUTE MAXIMUM RATINGS

Parameter

Symbol

Min

Typ

Max

Units

Notes

Storage Temperature

Supply Voltage

Ts

-55

+100

3.8

°C

V

V_cc

-0.4

VccT may not differ by more than

0.5V

TABLE 3 OPERATING CONDITIONS

Parameter

Symbol

Min

Typ

Max

Units

Notes

Operating Temperature, Case

Supply Voltage

T_op

V_cc

-40

+85

3.465

300

°C

V

3.135

3.3

Supply Current

Icc

200

mA

mV

Typical @ 85°C

Power Supply Noise (Peak-Peak)

V_{cc_ripple}

100

TABLE 4 -A ELECTRO-OPTICAL CHARACTERISTICS – HD-SDI TRANSMITTER (050-358-1D)

Parameter

Symbol

Min

Typ

Max

Units

Notes

Optical Output Power

Extinction Ratio

P_OUT

Er

-1

5

1.5

10

+5

dBm

dB

@ 1.485 Gbps

Optical Link Budget

19

dBm

Measured in combination with 050-

357 (Dual RX) and 050-358 (HD-

SDI CWDM Dual TX), Compliant

with SMPTE 292

Optical Wavelength, “27”, 1271 nm

Optical Wavelength, “29”, 1291 nm

Optical Wavelength, “31”, 1311 nm

Optical Wavelength, “33”, 1331 nm

Optical Wavelength, “35”, 1350 nm

Optical Wavelength, “37”, 1370 nm

Optical Wavelength, “39”, 1390 nm

Optical Wavelength, “41”, 1410 nm

Spectral Width, rms

λ_OUT

1261

1281

1301

1321

1341

1361

1381

1401

1271

1291

1311

1331

1351

1371

1391

1411

1278.5

1298.5

1318.5

1338.5

1358.5

1378.5

1398.5

1418.5

1

nm

Δλ

SMSR

RIN

TJ

nm

dB

Side Mode Suppression Ratio

Relative Intensity Noise

30

-117

1

dB/Hz

UI

Timing Jitter

SMPTE 292, 1.485 Gbps, Color bar

AC coupled Internally

Alignment Jitter

AJ

0.2

UI

Transmitter Differential Input Impedance

Differential Input Voltage

Rin

100

Ohms

mV_p-p

Vin_d

250

2200

CML, 100 ohm

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 4 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Ratings and Specifications (continued)

TABLE 4-B ELECTRO-OPTICAL CHARACTERISTICS – HD-SDI TRANSMITTER (050-358-3D “LOW POWER”)

Parameter

Symbol

Min

Typ

Max

Units

Notes

Optical Output Power

Extinction Ratio

P_OUT

Er

-4.5

5

-2.5

10

+0.5

dBm

dB

@ 1.485 Gbps

Optical Link Budget

15.5

dBm

Measured in combination with 050-

357 (Dual RX) and 050-358 (HD-

SDI CWDM Dual TX), Compliant

with SMPTE 292

Optical Wavelength, “27”, 1271 nm

Optical Wavelength, “29”, 1291 nm

Optical Wavelength, “31”, 1311 nm

Optical Wavelength, “33”, 1331 nm

Optical Wavelength, “35”, 1350 nm

Optical Wavelength, “37”, 1370 nm

Optical Wavelength, “39”, 1390 nm

Optical Wavelength, “41”, 1410 nm

Spectral Width, rms

λ_OUT

1261

1281

1301

1321

1341

1361

1381

1401

1271

1291

1311

1331

1351

1371

1391

1411

1278.5

1298.5

1318.5

1338.5

1358.5

1378.5

1398.5

1418.5

1

nm

Δλ

SMSR

RIN

TJ

nm

dB

Side Mode Suppression Ratio

Relative Intensity Noise

30

-117

1

dB/Hz

UI

Timing Jitter

SMPTE 292, 1.485 Gbps, Color bar

AC coupled Internally

Alignment Jitter

AJ

0.2

UI

Transmitter Differential Input Impedance

Differential Input Voltage

Rin

100

Ohms

mV_p-p

Vin_d

250

2200

CML, 100 ohm

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 5 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Ratings and Specifications (continued)

TABLE 6 COMPLIANCE SPECIFICATIONS

CHARACTERISTIC

Standard

Condition

Notes

Mechanical Shock

MIL-STD-810

Para. 516.6, proc. I, 650g

0.9 ms operating

Mechanical Vibration

Random, operating

Para. 514.6, 40g rms

ESD

MIL-STD-883

MIL-STD-1344

1000V HBM

Flame Resistance

Damp Heat

Eye Safety

Method 1012, Cond. B

Method 1002.2, Cond. B

Class 1 Laser Product

30 seconds

MIL-STD-1344

10 cycles , 24 hours

CDRH and IEC-825

TABLE 7 MATERIAL/FINISH

Item

PCB

Material/Finish

FR4

PCB flex

Railings

FR4 & Polyimide

Aluminum 6061-T6 per ASTM-B221/B211M or Equivalent

Screws

CRES Type, 302, 303, 304, 305, or 316

Optical Ferrules & Sleeves

Solder type

Zirconia, Ceramic

RoHS compliant Sn95/Sb5 (232°C melting temp) &

RoHS compliant Sn96.5/Ag3.0/Cu0.5 (217° melting)

GLENAIR, INC.

www.glenair.com

REV: 13

1211 AIR WAY

US Cage Code 06324

Printed in USA

∙

GLENDALE, CA 91201-2497

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

PAGE 6 of 18

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

FIGURE 1 - OUTLINE DRAWING CONTINUED (MARKING)

LABELING:

Each unit will be shipped in an antistatic bag. The label on the antistatic bag shall be at a minimum Arial size 10

black font and contain at a minimum the following information:

ANTISTATIC BAG LABEL:

Glenair

Cage Code: 06324

PN: 050-358XX-XX-XXXX

Rev: X

QTY: X

J/N: X

D/C:X

S/N*: XXXXXX

*If QTY is more than 1, there is no S/N

Each unit will be marked, either with a label or laser engraving, as follows:

1. Marking font to be Arial, greater than .08 inches in height.

2. Minimum Marking on each part will include the following:



Glenair

Serial number

Glenair Part Number

Example Minimum Marking:

GLENAIR SN123456

050-358C2-1D-2729

GLENAIR SN123456

050-358C2-1D-2729

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

Printed in USA

∙

1211 AIR WAY

∙

GLENDALE, CA 91201-2497

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

PAGE 7 of 18

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

FUNCTIONAL DESCRIPTION

Figure 2

PCB mount Dual-Transmitter Block Diagram

TRANSMITTER SECTION

Transmit Disable (TX1_Disable and TX2_Disable)

The transmitters accept a TTL and CMOS compatible transmit disable control signal input that shuts down the transmitter

optical output. A high signal disables the transmitter while a low signal allows normal dual-transmitter operation. Also laser

is disabled when TX Disable is open. In the event of a fault (e.g. eye safety circuit activated), cycling this control signal

resets the module. Host systems should allow a 10ms interval between successive assertions of this control signal.

Transmit Fault (TX1_FAULT and TX2_FAULT)

A catastrophic laser fault will activate the transmitter signal, TX*_FAULT, and disable the laser. This signal is an open

collector output (pull-up required on the host board). A low signal indicates normal laser operation and a high signal

indicates a fault. The TX*_FAULT will be latched high when a laser fault occurs and is cleared by toggling the

TX*_DISABLE input or cycling the power of the dual-transmitter. The transmitter fault condition can also be monitored via

the optional 2-wire serial interface (address A2, byte 110, bit 2).

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 8 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Eye Safety Circuit

The Transmitters provide Class 1 eye safety by design and are compliant with US FDA CDRH AEL Class 1 and EN(IEC)

60825-1,2, EN60950 Class 1. The eye safety circuit continuously monitors optical output power levels and will disable the

transmitter and assert a TX_FAULT signal upon detecting an unsafe condition. Such unsafe conditions can be created by

inputs from the host board (Vcc fluctuation, unbalanced code) or faults within the module.

FUNCTIONAL I/O

The PC board mount dual-transmitter accepts industry standard differential signals such as LVPECL and CML within the

scope of the SFP MSA. To simplify board requirements, transmitter bias resistors and ac coupling capacitors are

incorporated, per SFF-8074i, and hence are not required on the host board. The module is AC-coupled and internally

terminated.

Figure 3 illustrates a recommended interface circuit to link the PC board mount dual-transmitter to the supporting Physical

Layer integrated circuits.

The PC board mount dual-transmitter interfaces with the host circuit board through twenty I/O pins identified by function in

Table 8. The dual-transmitter high speed transmit and receive interfaces require SFP MSA compliant signal lines on the

host board. The TX1_DISABLE, TX2_DISABLE, TX1_FAULT and TX2_FAULT require TTL lines on the host board (per

SFF-8074i) if used. If an application chooses not to take advantage of the functionality of these pins TX1_Disable and

TX2_Disable need to be tied to GND, TX1_Fault, TX2_Fault do not need to be connected.

.

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 9 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

FIGURE 3

RECOMMENDED BOARD MOUNT DUAL-TRANSMITTER HOST BOARD SCHEMATIC

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 10 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Digital Diagnostic Interface and Serial Identification (EEPROM)

The PCB mount Dual-Transmitter is derived from the SFF-8074i SFP specification and with SFF-8472, the SFP

specification for Digital Diagnostic Monitoring Interface, but modified to account for Dual-Transmitter functionality. Both

specifications can be found at http://www.sffcommittee.org.

FIGURE 4 – DIGITAL DIAGNOSTIC MEMORY MAP OVERVIEW

A0h (Standard Serial ID Data Address)

Other Dynamic Data Addresses available – see Part Number Development Options (Table 1 and Table 1A)

The PCB mount Dual-Transmitter features EEPROM for Serial ID, which contains the product data stored for retrieval by

host equipment. This data is accessed via the 2-wire serial EEPROM protocol derived from with the industry standard

SFP Multi-Source Agreement but modified to account for Dual-Transmitter functionality. The base EEPROM memory,

bytes 0-255 at memory address A0h, is organized in compliance with SFF-8074i.

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 11 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Predictive Failure Identification

The predictive failure feature allows a host to identify potential link problems before system performance is impacted. Prior

identification of link problems enables a host to service an application via “fail over” to a redundant link or replace a

suspect device, maintaining system uptime in the process. For applications where ultra-high system uptime is required,

the PCB mount Transceiver provides a means to monitor two real-time laser metrics associated with observing laser

degradation and predicting failure: average laser bias current (TX_Bias) and average laser optical power (TX_Power).

Compliance Prediction

Compliance prediction is the ability to determine if an optical transceiver is operating within its operating and

environmental requirements. The PCB mount Transceiver provide real-time access to transceiver internal supply voltage

and temperature, allowing a host to identify potential component compliance issues. Received optical power is also

available to assess compliance of fiber cable plant and remote transmitter. When operating out of requirements, the link

cannot guarantee error free transmission.

Fault Isolation

The fault isolation feature allows a host to quickly pinpoint the location of a link failure, minimizing downtime. For optical

links, the ability to identify a fault at a local device, remote device or cable plant is crucial to speeding service of an

installation. PCB mount Transceiver real-time monitors of TX_Bias, TX_Power, Vcc, and Temperature can be used to

assess local transceiver current operating conditions.

Component Monitoring

Component evaluation is another use of the PCB mount Transceiver real-time monitors of TX_Bias, TX_Power, Vcc, and

Temperature. Potential uses are as debugging aids for system installation and design, and transceiver parametric

evaluation for factory or field qualification. For example, temperature per module can be observed in high density

applications to facilitate thermal evaluation of systems that incorporate this PCB mount transceiver

Required Host Board Components

A power supply noise rejection filter as describe in SFP MSA is required on the host PCB to meet data sheet

performance. This is filter incorporates an inductor which should be rated to 400 mADC and 1 Ω series resistance or

better. It should not be replaced with a ferrite. The required filter is illustrated in Figure 4. Also, the host PCB for the PCB

mount transceiver requires 4.7 K to 10 KΩ pull-up resistors for TX_FAULT, SCA and SDL lines.

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 12 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

FIGURE 4

RECOMMENDED HOST BOARD POWER SUPPLY FILTERING CIRCUIT

Fiber Compatibility

The transceiver is capable of transmission up to 10km with 9/125 μm fiber at 1.25Gbps data rate.

Electrostatic Discharge (ESD)

The Transceiver is compatible with ESD levels found in typical manufacturing and operating environments as described

JEDEC EIA JESD22-A114-A, Class 1 (<2000Volts) HBM. Glenair recommends that devices are handled with ESD

precautions to limit exposure to below 500V HBM.

There are two design cases in which immunity to ESD damage is important. The first case is during handling of the

transceiver prior to insertion to the host board. To protect the transceiver, it’s important to use standard industry ESD

handling precautions. These precautions include using grounded wrist straps, work benches, and floor mats in ESD

controlled areas. The ESD sensitivity of the Glenair PCB mount transceiver is compatible with typical industry production

environments.

The second case to consider is static discharges to the exterior of the host equipment after installation, in which case the

transceiver may be subject to system-level ESD requirements.

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 13 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Application Support

To assist in the transceiver design and evaluation process, Glenair offers the following aids:



Evaluation board & Product Manual, part number 050-329, which facilitates in the testing of the PCB mount

transceiver.



3D Step file to support modeling of mechanical fit and routing

PADS schematic and PCB layout library files that can be exported into customer’s PCB software design program

Applications Aid Example of PCB layout including details of high speed transmission designs

Customer Manufacturing Processes

This module is mounted with screws and interfaces with a high-speed low cost surface mount electrical connector residing

on the host PC board. The PCB mount transceiver is not designed for aqueous wash, IR reflow, or wave soldering

processes and should be mounted on the host board after host PC board has been through its assembly process.

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 14 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

TABLE 9

Byte

Decimal

TWO-WIRE INTERFACE ID: DATA FIELDS – ADDRESS A0h

#

Data

Byte

Decimal

37

#

Hex

Data

Notes

Hex

80

Notes

0

Glenair PCB mount Dual Transmitter

00

30

35

30

2D

33

35

38

43

32

2D

32

37

32

39

20

05

1E

Vendor OUI (NOT USED)

1

2

3

4

5

6

7

8

04

80

00

03

1E

00

64

00

47

4C

45

4E

41

49

52

20

Serial ID Module Definition

“GC” Fiber Optic Connector

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

Vendor OUI (NOT USED)

“0” Vendor Part Number ASCII Character (Note 5)

“5” Vendor Part Number ASCII Character (Note 5)

“0” Vendor Part Number ASCII Character (Note 5)

“-“ Vendor Part Number ASCII Character (Note 5)

“3” Vendor Part Number ASCII Character (Note 5)

“5” Vendor Part Number ASCII Character (Note 5)

“8” Vendor Part Number ASCII Character (Note 5)

“C“ Vendor Part Number ASCII Character (Note 5)

“2” Vendor Part Number ASCII Character (Note 5)

“-“ Vendor Part Number ASCII Character (Note 5)

“2“ Vendor Part Number ASCII Character (Note 5)

“7“ Vendor Part Number ASCII Character (Note 5)

“2“ Vendor Part Number ASCII Character (Note 5)

“9“ Vendor Part Number ASCII Character (Note 5)

“ “ Vendor Part Number ASCII Character (Note 5)

“ “ Vendor REV Level ASCII Character (Note 5)

Hex Byte of Laser Wavelength (Note 6)

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

NRZ

BR

9/125 µm Fiber, 10km @ 1.5 Gbps (Note 3)

“G” Vendor NAME ASCII Character

“L” Vendor NAME ASCII Character

“E” Vendor NAME ASCII Character

“N” Vendor NAME ASCII Character

“A” Vendor NAME ASCII Character

“I” Vendor NAME ASCII Character

“R” Vendor NAME ASCII Character

“ “ Vendor NAME ASCII Character

Hex Byte of Laser Wavelength (Note 6)

RESERVED

Check sum code for ID fields 0-62 (Note 7)

00

18

00

20

00

Hardware TX_Disable, TX_Fault,

67

68-83

84-91

92

93

94

Serial Number, ASCII (Note 8)

Date Code (Note 9)

Diagnostic Monitoring Type

Enhanced Options

68

A0

05

SFF-8472 rev 11.0

95

Checksum for bytes 64-94 (Note 7)

96-255

00

Notes:

1. RESERVED

2. RESERVED

3. Link distance with 9/125μm cable at 1.5Gbps is 10km.

4. RESERVED

5. Table 1, Part number options/extensions. Temperature, Screw Length Mod Codes, and “1D-” will not be added onto Digital Memory ID.

6. Laser wavelength is represented in 16 unsigned bits. The hex representation of 1310 nm is 051E. The hex representation of 850nm is 0352.

7. Addresses 63 and 95 are checksums calculated per SFF-8472 and SFF-8074, and stored prior to product shipment.

8. Addresses 68-83 specify the module’s ASCII serial number and will vary by unit.

9. Addresses 84-91 specify the module’s ASCII date code and will vary according to manufactured date-code.

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 15 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

Table 10 Two-Wire interface ID: Data Fields – Address A2h (TX1), A4h (TX2) standard (or see Table 1A for other options)

NOTE: RX Data fields are not applicable in this table (i.e. Addresses 32-39 and 104-105)

Byte #

Data

Byte #

Data

Byte #

Data

Decimal

Notes

Decimal

Notes

Decimal

Notes

0

1

2

3

4

5

6

7

Temp H Alarm MSB (Note 1)

Temp H Alarm LSB (Note 1)

Temp L Alarm MSB (Note 1)

Temp L Alarm LSB (Note 1)

Temp H Warning MSB (Note 1)

Temp H Warning LSB (Note 1)

Temp L Warning MSB (Note 1)

Temp L Warning LSB (Note 1)

Vcc H Alarm MSB (Note 2)

26

27

28

29

30

31

32

33

104

105

106

107

108

109

110

111

Reserved

TX Pwr L Alarm MSB (Note 4)

TX Pwr L Alarm LSB (Note 4)

TX Pwr H Warning MSB (Note 4)

TX Pwr H Warning LSB (Note 4)

TX Pwr L Warning MSB (Note 4)

TX Pwr L Warning LSB (Note 4)

Reserved

Status/Control

Reserved

8

34

112

Flag Bits

9

Vcc H Alarm LSB (Note 2)

35

Reserved

113

Flag Bits

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

Notes:

Vcc L Alarm MSB (Note 2)

Vcc L Alarm LSB (Note 2)

36

37

38

39

40-45

56-94

95

96

97

98

99

100

101

102

103

Reserved

114

115

116

117

118

119

120-122

123

124

125

126

127

128-247

248-255

Reserved

Flag Bits

Vcc H Warning MSB (Note 2)

Vcc H Warning LSB (Note 2)

Vcc L Warning MSB (Note 2)

Vcc L Warning LSB (Note 2)

Tx Bias H Alarm MSB (Note 3)

Tx Bias H Alarm LSB (Note 3)

Tx Bias L Alarm MSB (Note 3)

Tx Bias L Alarm LSB (Note 3)

Tx Bias H Warning MSB (Note 3)

Tx Bias H Warning LSB (Note 3)

Tx Bias L Warning MSB (Note 3)

Tx Bias L Warning LSB (Note 3)

TX Pwr H Alarm MSB (Note 4)

TX Pwr H Alarm LSB (Note 4)

Reserved

External Cal Constants (Note 6)

Checksum for bytes 0-94

Temperature MSB (Note 1)

Temperature LSB (Note 1)

Vcc MSB (Note 2)

Reserved

Reserved (Note 8)

Customer Writable (Note 9)

Vendor Specific

Vcc LSB (Note 2)

TX Bias MSB (Note 3)

TX Bias LSB (Note 3)

TX Power MSB (Note 4)

TX Power LSB (Note 4)

1. Temperature (Temp) is decoded as a 16 bit signed twos compliment integer in increments of 1/256 °C.

2. Supply voltage (VCC) is decoded as a 16 bit unsigned integer in increments of 100 μV.

3. Laser bias current (Tx Bias) is decoded as a 16 bit unsigned integer in increments of 2 μA.

4. Transmitted average optical power (Tx Pwr) is decoded as a 16 bit unsigned integer in increments of 0.1 μW.

5. Reserved

6. Bytes 56-94 are not intended from use but have been set to default values per SFF-8472.

7. Bytes 95 is a checksum calculated (per SFF-8472) and stored prior to product shipment.

8. Byte 127 accepts a write but performs no action (reserved legacy byte).

9. Bytes 128-247 are write enabled (customer writable).

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 16 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

TABLE 11

PARAMETER

DIGITAL DIAGNOSTIC MONITOR CHARACTERISTICS (WHEN APPLICABLE)

SYMBOL

MIN.

UNITS

NOTES

Temperature is measured internal to the Dual Transmitter and is

valid from

-40°C to +85 °C case temperature

Dual Transmitter Internal Temperature

Accuracy

TINT

±3.0

°C

Supply voltage is measured internal to the Dual Transmitter and can,

with less accuracy, be correlated to the voltage at the Vcc pin. Valid

over 3.3V ±5%

Dual Transmitter internal Supply

Voltage accuracy

VINT

±0.1

V

Dual Transmitter Laser DC Bias Current

Accuracy

Dual Transmitter Average Optical

Output Power Accuracy

IINT

PT

±10

%

Coupled into 9/125 mm SM fiber.

Valid from -1dBm to -10dBm

±3.0

dB

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 17 of 18

Printed in USA

GLENAIR, INC.

www.glenair.com

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com

050-358 PRODUCT BRIEF

PC Board Mount Dual-Transmitter

HD-SDI, SMF, 3.3V

ACCESSORIES

Fiber Optic Jumper Cables to support connection to Mil/Aerospace Connectors

KEY FEATURES:



Jumper cable between Glenair Transceiver (end A) and Mil/Aero Connector termini (End B)

Offered with either Multimode and Single Mode fibers

FIGURE 5

Fiber Optic Jumper Cable Assembly (see separate Glenair sales drawing FA02454 for details)

PCB Threaded Inserts, PN 059-0007

KEY FEATURES



Simplifies installation of PCB mount transceivers eliminating the need for washers and nuts

Soldered to PCB to eliminate need for handling nuts during assembly

Existing Options to support PCB thickness from 0.03” to 0.92”

Can support thicker PCB if required

EVALUATION Boards, PN 050-330, include



Manual with test block diagram, schematic and

Evaluation board PCBA

2 fiber optic cables (~1m, 9 μm/125 μm, GC connector to LC connector)

GLENAIR, INC.

www.glenair.com

REV: 13

US Cage Code 06324

GLENDALE, CA 91201-2497

PAGE 18 of 18

Printed in USA

∙

1211 AIR WAY

∙

TEL: 818-247-6000

∙

FAX: 818-500-9912

E-mail: sales@glenair.com


型号：	050-358D2-1D-3331
厂家：	Glenair
描述：	Transmitter,
文件：	总18页 (文件大小：1452K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

050-358D2-1D-3331 [GLENAIR]

相关型号：

050-358D2-3D-4141

050-358D6-3D-2737

050-358D6-3D-3731

050-358E2-3D-4141

050-358E6-3D-4137

050-358E6-3D-4141

050-367-1-T

050-373-2-D

050-397D2-T13R15-1D

050-397DC-T15R13-1D

050-424-3188220

050-424-3196220