MMO-6RF [GAMEWELL-FCI]
Multi-mod relay output; 多模继电器输出型号: | MMO-6RF |
厂家: | GAMEWELL-FCI BY HONEYWELL |
描述: | Multi-mod relay output |
文件: | 总2页 (文件大小:71K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Velociti™ Series
MM0-6RF
Multi-Mod Relay
Output Module
Description
The FCI Velociti™ Series, multi-mod six relay output
module (MMO-6RF) provides six (6), Form “C” control
relay outputs on one board. Its compact design affords
ease of installation while using a minimum of wall space.
The VelocitiTM Series use a communication protocol that
substantially increases the speed of communication be-
tween the sensors and certain FCI analog addressable
fire alarm controls. These devices operate in a grouped
fashion. If one of the devices in the group has a status
change, the panel’s microprocessor stops the group poll
and concentrates on the single device. The net effect is
response speed up to five times greater than earlier de-
signs.
MMO-6RF
The MMO-6RF connects to the signaling line circuit
(SLC) of the FCI analog addressable series fire alarm
control panels. Each relay circuit on the MMO-6RF occu-
pies its own address on the control panel’s SLC and can
be programmed to respond to its own individual control-
by-event sequence of operation. The address of the first
relay is set by a pair of rotary code switches on the
MMO-6RF. Each remaining relay circuit is automatically
assigned to its own subsequent address.
Features
• Each module provides six (6), individually addressed,
individually programmable form “C” relays.
• Removable wiring terminal blocks allow ease of
installation and servicing.
The MMO-6RF module includes an address disable
switch that allows one, two, or three addresses to be
turned off to free these addresses for other purposes.
• Terminal blocks can accommodate 12 to 18 AWG wire.
• Flexible jumper configuration feature allowing up to
three relay addresses to be disabled.
• A wide range of contact ratings.
• Designed for FCI analog addressable series fire
alarm control panels.
Each relay has its own status LED that flashes to indi-
cate proper polling and lights steady when the circuit has
been activated.
• Individual LED indicators*.
• Suitable for retrofit applications.
Two (2), multi-mod series units can be mounted in one
MBB-2 cabinet. Additional mounting options include the
MCH-6 chassis that can accommodate six (6), multi-mod
series modules. The MCH-6 chassis can be installed in
custom cabinets or mounted in the MBB-6 cabinet.
• Ideal for applications such as elevator control, AHU
control, door holder release or similar functions
requiring multiple relay outputs.
• Two (2), mounting cabinets available for two (2),
(MBB-2 cabinet) to six (6), (MBB-6 cabinet) units.
Note: Only the red LED is operative in panels that do not oper-
ate in Velociti™ mode.
The multi-mod series is ideal for applications where cen-
tralized location of circuits is required. As many as thirty-
six (36), Form “C” relays may be located in a cabinet that
is only 12.63” H x 24” W x 6.5” D in dimension saving
valuable wall space in mechanical rooms and electrical
closets and reducing cost of installation.
An ISO 9001-2000 Company
Velociti™ and E3 Series™ are trademarks of Fire Control Instruments.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2006 Gamewell-FCI. All rights reserved.
www.gamewell-fci.com
9020-0632 Rev. B page 1 of 2
Specifications
Ordering Information
Operating
Voltage:
Stand-by
Current:
Alarm Current:
Model
Description
15-32 VDC
MMO-6RF Multi-mod relay output
MBB-2
MBB-6
MCH-6
Backbox, 2 unit
Backbox, 6 unit, requires MCH-6
6-Unit mounting chassis
1.45 mA
32 mA (with all six relays activated
and all six LEDs lit)
Relay Current:
30 mA/ relay pulse
Relay Contact
Ratings:
(see below)
Temperature
Range:
32˚ F to 120˚ F (0˚ to 49˚ C)
10 to 85% (non-condensing)
6.8” H x 5.8” W x 1.0” D
(17.3 x 14.7 x 2.5 cm)
Humidity
Dimensions:
MBB-2
MBB-6
12.25” H x 9.25” W x 3.32” D
(31.1 x 23.5 x 8.4 cm)
12.63” H x 24” W x 6.5” D
(32.1 x 60.1 x 16.5 cm)
Contact Ratings
Current
Rating
Maximum
Voltage
Load
Description Application
3A
2A
1A
30 VDC
30 VDC
30 VDC
Resistive
Resistive
Inductive
Non-coded
Coded
Coded
(L/R= 2ms)
0.5A
30 VDC
Inductive
Coded
(L/R= 5ms)
0.9A
0.9A
0.7A
110 VDC
125 VAC
70.7 & VAC Inductive
(PF= 0.35)
Resistive
Resistive
Non-coded
Non-coded
Non-coded
0.5A
125 VAC
Inductive
Non-coded
(PF= 0.35)
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118
www.gamewell-fci.com
9020-0632 Rev. B page 2 of 2
相关型号:
MMO140-08IO7
Silicon Controlled Rectifier, 90A I(T)RMS, 58000mA I(T), 800V V(DRM), 800V V(RRM), 2 Element, MODULE-4
LITTELFUSE
MMO140-08IO7
Silicon Controlled Rectifier, 90A I(T)RMS, 58000mA I(T), 800V V(DRM), 800V V(RRM), 2 Element, MODULE-4
IXYS
MMO140-12IO7
Silicon Controlled Rectifier, 90A I(T)RMS, 58000mA I(T), 1200V V(DRM), 1200V V(RRM), 2 Element, MODULE-4
LITTELFUSE
MMO140-16IO7
Silicon Controlled Rectifier, 90A I(T)RMS, 58000mA I(T), 1600V V(DRM), 1600V V(RRM), 2 Element, MODULE-4
LITTELFUSE
MMO140-16IO7
Silicon Controlled Rectifier, 90A I(T)RMS, 58000mA I(T), 1600V V(DRM), 1600V V(RRM), 2 Element, MODULE-4
IXYS
MMO175-08IO7
Silicon Controlled Rectifier, 125A I(T)RMS, 80000mA I(T), 800V V(DRM), 800V V(RRM), 2 Element, MODULE-8
IXYS
©2020 ICPDF网 联系我们和版权申明