MB95F478HPMC1 [FUJITSU]
Microcontroller, 8-Bit, FLASH, CMOS, PQFP64, 10 X 10 MM, 0.50 MM PITCH, PLASTIC, LQFP-64;型号: | MB95F478HPMC1 |
厂家: | FUJITSU |
描述: | Microcontroller, 8-Bit, FLASH, CMOS, PQFP64, 10 X 10 MM, 0.50 MM PITCH, PLASTIC, LQFP-64 时钟 微控制器 外围集成电路 |
文件: | 总2页 (文件大小:216K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FUJITSU SEMICONDUCTOR
FACT SHEET
NP702-00002-0v01-E
8-bit Microcontrollers
MB95470H Series
MB95470H is a series of general-purpose, single-chip microcontrollers.
In addition to a compact instruction set, the microcontrollers of this series
contain a variety of peripheral resources.
It is possible to use it for the equipment that needs the LCD control
like healthcare, general home appliances and factory automation widely.
■FEATURES
F2MC-8FX CPU
■PRODUCT LINEUP
Part number MB95F MB95F MB95F MB95F MB95F MB95F
Parameter
474H
476H
478H
474K
476K
478K
Instruction set optimized for controllers
Clock
Type
Flash memory product
Maximum clock frequency:16.25MHz
ROM
Timer
20K
496
36K
60K
20K
496
36K
60K
(Byte)
8/16-bit composite timer:2 channels
RAM
(Byte)
8/16-bit PPG timer:2 channels
16-bit reload timer:1 channel
Time-base timer:1 channel
1008
2032
1008
2032
Low-voltage
detection
reset
Watch prescaler:1 channel
No
Yes
UART/SIO:3 channels
I2C:1 channel
LCD controller(LCDC)
Can be selected from 32 SEG×4 COM (Max 128 pixels)
to 28 SEG×8 COM (Max 224 pixels)
Brinking function
■ORDERING INFORMATION
Product name
Package
Remarks
-
MB95F474HPMC1
MB95F474KPMC1
MB95F476HPMC1
MB95F476KPMC1
MB95F478HPMC1
MB95F478KPMC1
Built-in division resistance for LCD drive
External interrupt:8 channels
- Interrupt by edge detection
- Can be used to wake up the device from different
low power consumption (standby) modes
8/10-bit A/D converter:8 channels
Low power consumption (standby) mode
Stop mode
Plastic・LQFP,64-pins
(FPT-64P-M38)
10.0mm□,0.50mm pitch
MB95F474HPMC2
MB95F474KPMC2
MB95F476HPMC2
MB95F476KPMC2
MB95F478HPMC2
MB95F478KPMC2
Plastic・LQFP,64-pins
(FPT-64P-M39)
12.0mm□,0.65mm pitch
-
Sleep mode
Watch mode
Time-base timer mode
I/O port
■PACKAGE EXAMPLE OF REFERENCE
MB95414K/F416K/F418K:59
MB95414H/F416H/F418H:58
On-chip debug
- 1-wire serial control
- Serial writing supported (asynchronous mode)
Low-voltage detection reset circuit
Clock supervisor counter
Dual operation Flash memory
Flash memory security function
Power supply:2.4~5.5V
Plastic ・ LQFP、64-pins
(FPT-64P-M38)
*The range of the power supply voltage is different
according to the operating frequency and the operating
temperature.
October 2010
1/2
Copyright©2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
MB95470H Series
PRELIMINARY
■BLOCK DIAGRAM
F2MC-8FX CPU
PF2*1/RST*2
Reset with LVD
Flash with security function
(60/36/20 Kbyte)
PF1/X1*2
PF0/X0*2
PG2/X1A*2
PG1/X0A*2
RAM (2032/1008/496 bytes)
Interrupt controller
Oscillator
circuit
CR
oscillator
Clock control
P01/TO00
P13/TO01
P14/EC0
C
8/16-bit composite timer ch. 0
8/10-bit A/D converter
Watch counter
On-chip debug
Wild register
P12*1/DBG
P00/AN00 to P07/AN07
P13/ADTG
4 COM:
8 COM:
P00/INT00 to P07/INT07
External interrupt
P90/V4 to P93/V1
P90/V4 to P93/V1
PA0/COM0 to PA3/COM3
PB0/SEG00, PB1/SEG01
PC0/SEG02 to PC3/SEG05
P60/SEG06 to P67/SEG13
PE0/SEG14 to PE7/SEG21
P07/SEG22 to P00/SEG29
P16/SEG30, P15/SEG31
PA0/COM0 to PA7/COM7
PB0/SEG00, PB1/SEG01
PC0/SEG02 to PC3/SEG05
P60/SEG06 to P67/SEG13
PE0/SEG14 to PE7/SEG21
P07/SEG22 to P02/SEG27
P14/UCK0
P11/UO0
P10/UI0
UART/SIO ch. 0
UART/SIO ch. 1
UART/SIO ch. 2
LCDC
(4 COM or 8 COM)
P05/UCK1
P03/UO1
P04/UI1
*3
P02/UCK2
P00/UO2
P01/UI2
P14/TI0
16-bit reload timer
P10/TO0
P20/PPG00
P21/PPG01
PE5/TO11
PE6/TO10
PE7/EC1
8/16-bit PPG ch. 0
8/16-bit PPG ch. 1
8/16-bit composite timer ch. 1
P16/PPG10
P15/PPG11
P20/CMPN
P21/CMPP
P17/CMPO
P22*1/SCL
P23*1/SDA
Voltage comparator
Port
I2C
Port
Vcc
Vss
*1: PF2, P12, P22 and P23 are N-ch open drain pins.
*2: Software option
*3: 8/16-bit composite timer ch. 1 and 16-bit reload timer can be used as an event counter
when the event counter operating mode is enabled.
■SUPPORT TOOL
HARDWARE
Name
Part Number
Remarks
BGM adapter
PC cable
MB2146-08-E
USB cable
TBD
F2MC-8FX MB95200 series in common
Attached to MB2146-08-E, 1.0m
-
Evaluation board
SOFTWARE
Software
Part Number
Operating System
SOFTUNE V3 Professional Pack
SP3603Z008-P01
Windows2000/XP/Vista
FLASH MICROCONTROLLER PROGRAMMER
Name
Remarks
Parallel programmer
Made by Flash Support Group, etc.(Under contemplation)
FUJITSU FLASH MCU programmer
Serial on board programmer
NP702-00002-0v01-E
October 2010
2/2
Copyright©2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
相关型号:
MB95F478HPMC1-G-SNE2
Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PQFP64, 10 X10 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-64
FUJITSU
MB95F478HPMC2
Microcontroller, 8-Bit, FLASH, CMOS, PQFP64, 12 X 12 MM, 0.65 MM PITCH, PLASTIC, LQFP-64
CYPRESS
MB95F478KPMC1
Microcontroller, 8-Bit, FLASH, CMOS, PQFP64, 10 X 10 MM, 0.50 MM PITCH, PLASTIC, LQFP-64
FUJITSU
MB95F478KPMC1
Microcontroller, 8-Bit, FLASH, CMOS, PQFP64, 10 X 10 MM, 0.50 MM PITCH, PLASTIC, LQFP-64
CYPRESS
MB95F478KPMC1-G-SNE2
Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PQFP64, 10 X10 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-64
FUJITSU
MB95F478KPMC2
8-BIT, FLASH, MICROCONTROLLER, PQFP64, 12 X 12 MM, 0.65 MM PITCH, PLASTIC, LQFP-64
CYPRESS
©2020 ICPDF网 联系我们和版权申明