74LVTH652MTC [FAIRCHILD]
Low Voltage Octal Transceiver/Register with 3-STATE Outputs; 低电压八路收发器/寄存器与3态输出型号: | 74LVTH652MTC |
厂家: | FAIRCHILD SEMICONDUCTOR |
描述: | Low Voltage Octal Transceiver/Register with 3-STATE Outputs |
文件: | 总8页 (文件大小:81K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
April 2000
Revised April 2000
74LVTH652
Low Voltage Octal Transceiver/Register
with 3-STATE Outputs
General Description
Features
■ Input and output interface capability to systems at
The LVTH652 consists of bus transceiver circuits with D-
type flip-flops, and control circuitry arranged for multiplexed
transmission of data directly from the input bus or from the
internal registers. Data on the A or B bus will be clocked
into the registers as the appropriate clock pin goes to HIGH
logic level. Output Enable pins (OEAB, OEBA) are pro-
vided to control the transceiver function. (See Functional
Description).
5V VCC
■ Bushold data inputs eliminate the need for external pull-
up resistors to hold unused inputs
■ Live insertion/extraction permitted
■ Power Up/Down high impedance provides glitch-free
bus loading
■ Outputs source/sink −32 mA/+64 mA
The LVTH652 data inputs include bushold, eliminating the
need for external pull-up resistors to hold unused inputs.
■ Functionally compatible with the 74 series 652
■ Latch-up performance exceeds 500 mA
This octal transceiver/register is designed for low-voltage
(3.3V) VCC applications, but with the capability to provide a
TTL interface to a 5V environment. The LVTH652 is fabri-
cated with an advanced BiCMOS technology to achieve
high speed operation similar to 5V ABT while maintaining
low power dissipation.
Ordering Code:
Order Number
74LVTH652WM
74LVTH652MTC
Package Number
M24B
Package Description
24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MTC24
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbols
IEEE/IEC
© 2000 Fairchild Semiconductor Corporation
DS012018
www.fairchildsemi.com
Pin Descriptions
Connection Diagram
Pin Names
Description
A0–A7
Data Register A Inputs/
3-STATE Outputs
B0–B7
Data Register B Inputs/
3-STATE Outputs
CPAB, CPBA
SAB, SBA
Clock Pulse Inputs
Select Inputs
Output Enable Inputs
OEAB, OEBA
Truth Table
(Note 1)
Inputs
Inputs/Outputs
Operating Mode
OEAB OEBA
CPAB
CPBA
SAB SBA
A0 thru A7
Input
B0 thru B7
Input
L
L
H
H
H
H
X
L
H or L
H or L
X
X
X
X
X
X
X
X
L
X
X
X
X
X
X
L
Isolation
Store A and B Data
X
H
L
H or L
Input
Input
Not Specified Store A, Hold B
Output Store A in Both Registers
H or L
Not Specified Input
Hold A, Store B
L
Output
Output
Input
Input
Store B in Both Registers
Real-Time B Data to A Bus
Store B Data to A Bus
Real-Time A Data to B Bus
Stored A Data to B Bus
L
L
X
X
X
H or L
X
L
L
H
X
X
H
H
H
H
X
Input
Output
Output
H or L
X
H
Stored A Data to B Bus and
Stored B Data to A Bus
H
L
H or L
H or L
H
H
Output
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial
= LOW to HIGH Clock Transition
Note 1: The data output functions may be enabled or disabled by various signals at OEAB or OEBA inputs. Data input functions are always enabled, i.e.,
data at the bus pins will be stored on every LOW-to-HIGH transition on the clock inputs.
Logic Diagram
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
www.fairchildsemi.com
2
Functional Description
In the transceiver mode, data present at the HIGH imped-
ance port may be stored in either the A or B register or
both.
Data on the A or B data bus, or both can be stored in the
internal D-type flip-flop by LOW-to-HIGH transitions at the
appropriate Clock Inputs (CPAB, CPBA) regardless of the
Select or Output Enable Inputs. When SAB and SBA are in
the real time transfer mode, it is also possible to store data
without using the internal D-type flip-flops by simulta-
neously enabling OEAB and OEBA. In this configuration
each Output reinforces its Input. Thus when all other data
sources to the two sets of bus lines are in a HIGH imped-
ance state, each set of bus lines will remain at its last state.
The select (SAB, SBA) controls can multiplex stored and
real-time.
The examples below demonstrate the four fundamental
bus-management functions that can be performed with the
LVTH652.
Real-Time Transfer
Bus B to Bus A
Real-Time Transfer
Bus A to Bus B
OEAB
H
OEBA
H
CPAB
X
CPBA
X
SAB
L
SBA
X
OEAB
L
OEBA
L
CPAB
X
CPBA
X
SAB
X
SBA
L
Transfer Storage
Data to A or B
Storage
OEAB
H
OEBA
L
CPAB
H or L
CPBA
H or L
SAB
H
SBA
H
OEAB
OEBA
CPAB
X
CPBA
X
SAB
X
SBA
X
X
L
L
H
X
H
X
X
X
X
3
www.fairchildsemi.com
Absolute Maximum Ratings(Note 2)
Symbol
VCC
Parameter
Supply Voltage
Value
−0.5 to +4.6
−0.5 to +7.0
−0.5 to +7.0
−0.5 to +7.0
−50
Conditions
Units
V
V
VI
DC Input Voltage
VO
DC Output Voltage
Output in 3-STATE
V
Output in HIGH or LOW State (Note 3)
IIK
IOK
IO
DC Input Diode Current
DC Output Diode Current
DC Output Current
VI < GND
mA
mA
−50
V
V
V
O < GND
64
O > VCC Output at HIGH State
O > VCC Output at LOW State
mA
128
ICC
DC Supply Current per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature
±64
mA
mA
°C
IGND
TSTG
±128
−65 to +150
Recommended Operating Conditions
Symbol
VCC
VI
Parameter
Min
2.7
0
Max
Units
V
Supply Voltage
3.6
5.5
−32
64
Input Voltage
V
IOH
HIGH Level Output Current
LOW Level Output Current
mA
mA
°C
IOL
TA
Free-Air Operating Temperature
−40
85
∆t/∆V
Input Edge Rate, VIN = 0.8V–2.0V, VCC = 3.0V
0
10
ns/V
Note 2: Absolute Maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions
beyond those indicated may adversely affect device reliability. Functional operation under absolute maximum rated conditions is not implied.
Note 3: I Absolute Maximum Rating must be observed.
O
www.fairchildsemi.com
4
DC Electrical Characteristics
V
T =−40°C to +85°C
A
CC
Symbol
Parameter
Units
Conditions
(V)
2.7
Min
Max
V
V
V
V
Input Clamp Diode Voltage
−1.2
V
I = −18 mA
IK
I
Input HIGH Voltage
Input LOW Voltage
Output HIGH Voltage
2.7–3.6
2.7–3.6
2.7–3.6
2.7
2.0
V
≤ 0.1V or
IH
IL
O
O
V
0.8
V
≥ V − 0.1V
CC
V
− 0.2
V
V
I
I
I
I
I
I
I
I
= −100 µA
= −8 mA
= −32 mA
= 100 µA
= 24 mA
= 16 mA
= 32 mA
= 64 mA
OH
CC
OH
OH
OH
OL
OL
OL
OL
OL
2.4
3.0
2.0
V
V
Output LOW Voltage
2.7
0.2
0.5
V
OL
2.7
V
3.0
0.4
V
3.0
0.5
V
3.0
0.55
V
I
I
I
Bushold Input Minimum Drive
3.0
75
−75
500
−500
µA
µA
µA
µA
µA
µA
µA
µA
µA
V = 0.8V
I
I(HOLD)
V = 2.0V
I
Bushold Input Over-Drive
Current to Change State
Input Current
3.0
(Note 4)
(Note 5)
I(OD)
I
3.6
3.6
3.6
10
±1
V = 5.5V
I
Control Pins
Data Pins
V = 0V or V
I CC
−5
V = 0V
I
1
V = V
I CC
I
I
Power OFF Leakage Current
Power Up/Down 3-STATE
Output Current
0
±100
0V ≤ V or V ≤ 5.5V
I O
OFF
V
= 0.5V to 3.0V
PU/PD
O
0–1.5V
±100
µA
V = GND or V
I
CC
I
I
I
I
I
I
I
3-STATE Output Leakage Current
3-STATE Output Leakage Current
3-STATE Output Leakage Current
Power Supply Current
3.6
3.6
3.6
3.6
3.6
3.6
3.6
−5
5
µA
µA
V
V
V
= 0.0V
= 3.6V
OZL
OZH
O
O
+
10
µA
< V ≤ 5.5V
CC O
OZH
0.19
5
mA
mA
mA
mA
Outputs HIGH
CCH
CCL
CCZ
Power Supply Current
A or B Port Outputs LOW
Outputs Disabled
Power Supply Current
0.19
0.19
+
Power Supply Current
V
≤ V ≤ 5.5V
CCZ
CC O
Outputs Disabled
One Input at V − 0.6V
∆I
Increase in Power Supply Current
(Note 6)
CC
CC
3.6
0.2
mA
Other Inputs at V or GND
CC
Note 4: An external driver must source at least the specified current to switch from LOW-to-HIGH.
Note 5: An external driver must sink at least the specified current to switch from HIGH-to-LOW.
Note 6: This is the increase in supply current for each input that is at the specified voltage level rather than V or GND.
CC
Dynamic Switching Characteristics (Note 7)
V
T
= 25°C
A
Conditions
CC
Symbol
Parameter
Units
C
= 50 pF, R = 500Ω
(V)
3.3
3.3
Min
Typ
0.8
Max
L
L
V
V
Quiet Output Maximum Dynamic V
V
V
(Note 8)
(Note 8)
OLP
OL
Quiet Output Minimum Dynamic V
−0.8
OLV
OL
Note 7: Characterized in SOIC package. Guaranteed parameter, but not tested.
Note 8: Max number of outputs defined as (n). n−1 data inputs are driven 0V to 3V. Output under test held LOW.
5
www.fairchildsemi.com
AC Electrical Characteristics
T
= −40°C to +85°C
A
C
= 50 pF, R = 500Ω
L
L
Symbol
Parameter
Units
V
= 3.3V ± 0.3V
V
= 2.7V
CC
CC
Min
150
1.8
1.8
1.3
1.3
1.5
1.5
1.1
1.1
Max
Min
150
1.8
1.8
1.3
1.3
1.5
1.5
1.1
1.1
Max
f
t
t
t
t
t
t
t
t
Maximum Clock Frequency
MHz
ns
MAX
Propagation Delay Data to Output
Clock to A or B
5.6
4.8
4.5
4.6
5.5
5.4
5.2
5.6
6.2
5.6
4.9
5.2
6.4
6.1
6.5
6.6
PLH
PHL
PLH
PHL
PLH
PHL
PZH
PZL
Propagation Delay Data to Output
Data to A or B
ns
ns
ns
Propagation Delay Data to Output
SBA or SAB to A or B
Output Enable Time
OE to A
t
t
Output Disable Time
2.0
2.0
5.5
5.5
2.0
2.0
6.1
5.9
PHZ
PLZ
ns
ns
OE to A
t
t
t
t
t
t
Output Enable Time
OE to B
1.3
1.3
1.5
1.5
3.3
1.2
1.6
4.9
5.3
5.6
5.6
1.3
1.3
1.5
1.5
3.3
1.5
2.2
5.7
5.8
6.7
6.3
PZH
PZL
PHZ
PLZ
W
Output Disable Time
OE to B
ns
ns
ns
ns
ns
Pulse Duration
Setup Time
Clock HIGH or LOW
Data HIGH before CP
S
Data LOW before CP
t
t
t
Hold Time
Data HIGH or LOW after CP
0.8
0.8
H
Output to Output Skew
(Note 9)
1.0
1.0
1.0
1.0
OSHL
OSLH
Note 9: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The
specification applies to any outputs switching in the same direction, either HIGH-to-LOW (t
) or LOW-to-HIGH (t
).
OSHL
OSLH
Capacitance (Note 10)
Symbol
Parameter
Input Capacitance
Input/Output Capacitance
Conditions
= 0V, V = 0V or V
Typical
Units
C
C
V
V
4
8
pF
pF
IN
CC
I
CC
= 3.0V, V = 0V or V
CC
I/O
CC
O
Note 10: Capacitance is measured at frequency f = 1 MHz, per MIL-STD-883B, Method 3012.
www.fairchildsemi.com
6
Physical Dimensions inches (millimeters) unless otherwise noted
24-Lead (0.300’ Wide) Molded Small Outline Package, SOIC JEDEC
Package Number M24B
7
www.fairchildsemi.com
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
24-Lead Molded Small Outline Package, TSSOP JEDEC
Package Number MTC24
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
www.fairchildsemi.com
8
相关型号:
74LVTH652MTCX_NL
Registered Bus Transceiver, LVT Series, 1-Func, 8-Bit, True Output, BICMOS, PDSO24, 4.40 MM, MO-153, TSSOP-24
FAIRCHILD
©2020 ICPDF网 联系我们和版权申明