IRM-36XXM2 [EVERLIGHT]

Infrared Receiver Module;
IRM-36XXM2
型号: IRM-36XXM2
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Infrared Receiver Module

文件: 总7页 (文件大小:269K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Infrared Receiver Module  
IRM-36xxM2 series  
Features  
High protection ability against EMI  
Circular lens for improved reception characteristics  
Available for various carrier frequencies  
Min burst length: 10 cycles  
Min gap length: 14 cycles  
Low operating voltage and low power consumption  
High immunity against ambient light  
Long reception range  
High sensitivity  
Pb free and RoHS compliant  
1
2
3
Description  
The IRM-36xxM2 devices are DIP type infrared  
receivers which have been developed and designed by  
using the latest IC technology.  
Pin Configuration  
The PIN diode and preamplifier are assembled onto a  
lead frame and molded into a black epoxy package  
which operates as an IR filter.The demodulated  
output signal can directly be decoded by a  
microprocessor.  
1. OUT  
2. GND  
3. VCC  
Applications  
• AV equipment such as TV, VCR, DVD, CD, MD, etc.  
• CATV set top boxes  
• Multi-media Equipment  
• Other devices using IR remote control  
Application Circuit  
Block Diagram  
The RC Filter must be connected as close as possible to  
Vcc and GND pins.  
Everlight Electronics Co., Ltd.  
Document No:DMO-0000196  
1
http://www.everlight.com  
Rev.1  
August 3, 2010  
Revision : 1  
Release Date:2010-08-06 18:27:31.0  
LifecyclePhase:  
Expired Period: Forever  
Infrared Receiver Module  
IRM-36xxM2 series  
Parts Table  
Model No.  
IRM-3636M2  
IRM-3638M2  
IRM-3640M2  
Carrier Frequency  
36 kHz  
38 kHz  
40 kHz  
Package Dimensions  
(Dimensions in mm)  
Everlight Electronics Co., Ltd.  
Document No:DMO-0000196  
2
http://www.everlight.com  
August 3, 2010  
Rev.1  
Revision : 1  
Release Date:2010-08-06 18:27:31.0  
LifecyclePhase:  
Expired Period: Forever  
Infrared Receiver Module  
IRM-36xxM2 series  
Absolute Maximum Ratings (Ta=25°C)  
Parameter  
Symbol  
Rating  
Unit  
Supply Voltage  
Vcc  
Topr  
Tstg  
Tsol  
6
V
Operating Temperature  
-20 ~ +80  
-40 ~ +85  
260  
Storage Temperature  
Soldering Temperature *1  
*1 4mm from mold body for less than 10 seconds  
Electro-Optical Characteristics (Ta=25, Vcc=3V)  
Parameter  
Symbol  
MIN.  
TYP.  
MAX.  
Unit  
Condition  
mA  
No input signal  
Current consumption  
Supply voltage  
Icc  
VCC  
λp  
---  
2.7  
---  
0.4  
-
0.6  
5.5  
---  
V
nm  
Peak wavelength  
940  
L0  
14  
6
---  
---  
---  
---  
m
Reception range  
L45  
See chapter  
‚Test method’  
deg  
deg  
Half angle(horizontal)  
Half angle(vertical)  
φh  
φv  
---  
---  
±35  
±35  
---  
---  
μs  
μs  
Test signal  
according to  
figure 1  
High level pulse width  
Low level pulse width  
High level output voltage  
Low level output voltage  
Internal pull up resistor  
TH  
TL  
450  
500  
---  
---  
700  
750  
---  
VOH  
VOL  
RPU  
Vcc-0.4  
---  
---  
V
V
ISINK2mA  
0.2  
100  
0.5  
115  
85  
kΩ  
Everlight Electronics Co., Ltd.  
Document No:DMO-0000196  
3
http://www.everlight.com  
August 3, 2010  
Rev.1  
Revision : 1  
Release Date:2010-08-06 18:27:31.0  
LifecyclePhase:  
Expired Period: Forever  
Infrared Receiver Module  
IRM-36xxM2 series  
Test method  
The specified electro-optical characteristics are valid under the following conditions.  
1. Measurement environment  
A place without extreme light reflections.  
2. External light  
The environment contains an ordinary, white fluorescent lamp without high frequency modulation. The  
color temperature is 2856K and the illumination at the IR receiver is less than 10 Lux (Ev10Lux).  
3. Standard transmitter  
The test transmitter is calibrated by using the circuit shown in figure 2. The radiation intensity of the  
transmitter is adjusted until Vo=400mVp-p. Both, the test transmitter and the photo diode, have a peak  
wavelength of 940nm. The photo diode for calibration is PD438B (λp=940nm, Vr=5V).  
4. The measurement system is shown in Fig.-3  
Fig.-1 Transmitter Wave Form  
D.U.T output Pulse  
Fig.-2 standard transmitter calibration  
Fig.-3  
Measuring System  
Everlight Electronics Co., Ltd.  
Document No:DMO-0000196  
4
http://www.everlight.com  
Rev.1  
August 3, 2010  
Revision : 1  
Release Date:2010-08-06 18:27:31.0  
LifecyclePhase:  
Expired Period: Forever  
Infrared Receiver Module  
IRM-36xxM2 series  
Typical Electro-Optical Characteristic Curves  
Everlight Electronics Co., Ltd.  
Document No:DMO-0000196  
5
http://www.everlight.com  
August 3, 2010  
Rev.1  
Revision : 1  
Release Date:2010-08-06 18:27:31.0  
LifecyclePhase:  
Expired Period: Forever  
Infrared Receiver Module  
IRM-36xxM2 series  
Code information  
Protocol  
JVC  
Suitable  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Protocol  
RCA  
Suitable  
Yes  
Matsushita  
Mitsubishi  
NEC  
Sharp  
Yes  
Sony 12 Bit  
Sony 15 Bit  
Sony 20Bit  
Toshiba  
Yes  
Yes  
RC5  
Yes  
RC6  
Yes  
RCMM  
RCS-80  
Zenith  
Yes  
No  
Continuous Code  
No  
Device Marking  
Notes  
1
2
3
4
denotes Year code  
denotes Month code  
denotes Device number  
denotes Carrier frequency  
Everlight Electronics Co., Ltd.  
Document No:DMO-0000196  
6
http://www.everlight.com  
August 3, 2010  
Rev.1  
Revision : 1  
Release Date:2010-08-06 18:27:31.0  
LifecyclePhase:  
Expired Period: Forever  
Infrared Receiver Module  
IRM-36xxM2 series  
Packing Quantity  
1500 pcs / Box  
10 Boxes / Carton  
DISCLAIMER  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material  
change for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions for use  
outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting  
from use of the product which does not comply with the absolute maximum ratings and the instructions  
included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in  
any form is prohibited without the specific consent of EVERLIGHT.  
Everlight Electronics Co., Ltd.  
Document No:DMO-0000196  
7
http://www.everlight.com  
August 3, 2010  
Rev.1  
Revision : 1  
Release Date:2010-08-06 18:27:31.0  
LifecyclePhase:  
Expired Period: Forever  

相关型号:

IRM-36XXM3

Infrared Receiver Module
EVERLIGHT

IRM-36XXN3F4

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-36XXT

Infrared Remote control Receiver Module Own Inner Shield
EVERLIGHT

IRM-3733A

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3733N3

Infrared Remote control Receiver Module Own Inner Shield
EVERLIGHT

IRM-3733N3-E

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3733V

Logic Output Photo IC, ROHS COMPLIANT, PLASTIC PACKAGE-3
EVERLIGHT

IRM-3736

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3736A

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3736M

Infrared Receiver Control
EVERLIGHT

IRM-3736M3

Infrared Receiver Module
EVERLIGHT

IRM-3736N3

Infrared Remote control Receiver Module Own Inner Shield
EVERLIGHT