IRM-36XXN3F4 [EVERLIGHT]

Infrared Remote-control Receiver Module; 红外遥控接收模块
IRM-36XXN3F4
型号: IRM-36XXN3F4
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Infrared Remote-control Receiver Module
红外遥控接收模块

遥控
文件: 总9页 (文件大小:219K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EVERLIGHT ELECTRONICS CO.,LTD.  
Technical Data Sheet  
Infrared Remote-control Receiver Module  
IRM-36xxN3F4 SERIES  
Features  
High protection ability against EMI .  
Circular lens to improve the receive characteristic.  
Line-up for various center carrier frequencies.  
Low voltage and low power consumption.  
High immunity against ambient light.  
Photodiode with integrated circuit.  
TTL and CMOS compatibility.  
Long reception distance.  
High sensitivity.  
Pb free.  
Descriptions  
The device is a miniature type infrared remote control  
system receiver which has been developed and designed by  
utilizing the most updated IC technology. The PIN diode  
and preamplifier are assembled on lead frame, the epoxy  
package is designed as an IR filter. The demodulated  
output signal can directly be decoded by a microprocessor.  
Applications  
1. Optical switch  
2. Light detecting portion of remote control  
AV instruments such as Audio, TV, VCR, CD, MD, etc.  
Home appliances such as Air-conditioner, Fan , etc.  
The other equipments with wireless remote control.  
CATV set top boxes  
Multi-media Equipment  
PART  
MATERIAL  
COLOR  
Chip  
Silicon  
---  
Lead Frame  
Package  
SPCC  
Epoxy  
Silver white  
Black  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1.2  
Page: 1 of 9  
Device NoDMO-036-246  
Prepared date11-23-2004  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Package Dimensions  
OUT  
GND  
Vcc  
Notes: 1.All dimensions are in millimeters.  
2.Tolerances unless dimensions ±0.3mm.  
Available Types For Different Carrier Frequencies  
Type  
Carrier Frequencies (Typ)  
IRM-3633N3F4  
IRM-3636N3F4  
IRM-3638N3F4  
IRM-3640N3F4  
IRM-3656N3F4  
33 kHz  
36 kHz  
38 kHz  
40 kHz  
56 kHz  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Prepared date11-23-2004  
Rev 1.2  
Page: 2 of 9  
Device NoDMO-036-246  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Absolute Maximum Ratings (Ta=25)  
Parameter  
Symbol  
Rating  
Unit  
Notice  
Supply Voltage  
Vcc  
Topr  
Tstg  
0~6  
V
Operating Temperature  
Storage Temperature  
-25 ~ +85  
-40 ~ +85  
4mm from mold body  
less than 10 seconds  
Soldering Temperature  
Tsol  
260  
Recommended Operating Condition  
Supply Voltage Rating: Vcc 2.7V to 5.5V  
Electro-Optical Characteristics (Ta=25, and Vcc=3.0V)  
Parameter  
Symbol  
MIN.  
TYP.  
MAX.  
Unit  
Condition  
mA No signal input  
Consumption Current  
Peak Wavelength  
Icc  
0.7  
---  
0.9  
2.0  
---  
nm  
λp  
940  
L0  
14  
6
---  
---  
---  
---  
m
Reception Distance  
L45  
At the ray axis  
deg  
*1  
Θh  
Θv  
TH  
TL  
Half Angle(Horizontal)  
Half Angle(Vertical)  
---  
---  
45  
45  
---  
---  
---  
---  
deg  
μs  
High Level Pulse Width  
Low Level Pulse Width  
400  
400  
800  
800  
At the ray axis  
*2  
μs  
High Level Output Voltage  
Low Level Output Voltage  
VH  
VL  
2.7  
---  
---  
---  
V
V
0.2  
0.5  
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°.  
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1.2  
Page: 3 of 9  
Device NoDMO-036-246  
Prepared date11-23-2004  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Test Method:  
The specified electro-optical characteristics is satisfied under the following  
Conditions at the controllable distance.  
cMeasurement place  
A place that is nothing of extreme light reflected in the room.  
dExternal light  
Project the light of ordinary white fluorescent lamps which are not high  
Frequency lamps and must be less then 10 Lux at the module surface.  
(Ee10Lux)  
eStandard transmitter  
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output  
Wave form shown in Fig.-1.According to the measurement method shown in  
Fig.-2 the standard transmitter is specified.  
However , the infrared photodiode to be used for the transmitter should be  
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).  
fMeasuring system  
According to the measuring system shown in Fig.-3  
Fig.-1 Transmitter Wave Form  
D.U.T output Pulse  
Carrier frequency is adjusted to  
center frequency of each product.  
OUTPUT PULSE  
OF DEVICE  
IR TANSMITTER  
OUTPUT WAVE FORM  
Duty=0.5  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1.2  
Page: 4 of 9  
Device NoDMO-036-246  
Prepared date11-23-2004  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Fig.-2 Measuring Method  
Fig.-3  
Measuring System  
20cm  
10k  
+5.0± 0.1V  
L: Transmission Distance  
Vcc  
10uF  
OUT  
θ
θ
Standard Transmitter  
D.U.T  
Vout  
Vout  
Standard Transmitter  
GND  
Oscilloscope  
θ: Angle Of Horizontal & Vertical Direction  
Block Diagram  
Vs  
IN  
OUT  
µC  
Input  
CGA & filter  
Demodulator  
Oscillator  
AGC/ATC & digital control  
Carrier frequency f0  
Modulated IR signal  
min 10 pulses  
GND  
Application Circuit:  
RC Filter should be connected closely between Vcc pin and GND pin.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1.2  
Page: 5 of 9  
Device NoDMO-036-246  
Prepared date11-23-2004  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Typical Electro-Optical Characteristics Curves  
Fig.-4 Relative Spectral Sensitivity vs. Wavelength  
Fig.-5 Relative Transmission Distance vs. Direction  
θ
Fig.-6 Arrival Distance vs. Ambient Temperature  
Fig.-7 Arrival Distance vs. Supply Voltage  
17.5  
17.5  
14.0  
10.5  
7.0  
14.0  
10.5  
7.0  
3.5  
3.5  
Ambient Temperature Ta (°C)  
Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency  
IRM-3633N3F4  
IRM-3636N3F4  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1.2  
Page: 6 of 9  
Device NoDMO-036-246  
Prepared date11-23-2004  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Typical Electro-Optical Characteristics Curves  
Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency  
IRM-3638N3F4  
IRM-3640N3F4  
Center Carrier Frequency (kHz)  
Center Carrier Frequency (kHz)  
IRM-3656N3F4  
Center Carrier Frequency (kHz)  
Fig.-9 Relative Transmission Distance vs. Center Carrier Frequency  
Transmission Distance Lc (m)  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1.2  
Page: 7 of 9  
Device NoDMO-036-246  
Prepared date11-23-2004  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Reliability Test Item And Condition  
The reliability of products shall be satisfied with items listed below.  
Confidence level90%  
LTPD10%  
Failure Judgement Samples(n)  
Test Items  
Test Conditions  
Criteria  
Defective(c)  
1 cycle -25℃  
+85℃  
Temperature cycle  
High temperature test  
(30min)(5min)(30min)  
300 cycle test  
n=22,c=0  
Temp: +85℃  
Vcc:5V  
n=22,c=0  
n=22,c=0  
n=22,c=0  
n=22,c=0  
L0L×0.8  
1000hrs  
L45L×0.8  
Temp: -40℃  
Low temperature  
storage  
1000hrs  
L: Lower  
specification limit  
Ta: 85,RH:85%  
High temperature  
High humidity  
1000hrs  
Temp: 260±510sec  
Solder heat  
4mm From the bottom of the package.  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Rev 1.2  
Page: 8 of 9  
Device NoDMO-036-246  
Prepared date11-23-2004  
Prepared byCarryll Hsu  
EVERLIGHT ELECTRONICS CO.,LTD.  
IRM-36xxN3F4 SERIES  
Packing Quantity Specification  
1. 1500 PCS/1Box  
2. 10 Boxes/1Carton  
Label Form Specification  
CPN: Customer’s Production Number  
P/N : Production Number  
QTY: Packing Quantity  
CAT: Ranks  
HUE: Peak Wavelength  
REF: Reference  
IRM-3638N3F4  
LOT No: Lot Number  
MADE IN TAIWAN: Production Place  
Notes  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on  
material change for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions  
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for  
any damage resulting from use of the product which does not comply with the absolute  
maximum ratings and the instructions included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT  
corporation. Please don’t reproduce or cause anyone to reproduce them without  
EVERLIGHT’s consent.  
EVERLIGHT ELECTRONICS CO., LTD.  
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,  
Tucheng, Taipei 236, Taiwan, R.O.C  
Tel: 886-2-2267-2000, 2267-9936  
Fax: 886-2267-6244, 2267-6189, 2267-6306  
http:\\www.everlight.com  
Everlight Electronics Co., Ltd.  
http:\\www.everlight.com  
Prepared date11-23-2004  
Rev 1.2  
Page: 9 of 9  
Device NoDMO-036-246  
Prepared byCarryll Hsu  

相关型号:

IRM-36XXT

Infrared Remote control Receiver Module Own Inner Shield
EVERLIGHT

IRM-3733A

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3733N3

Infrared Remote control Receiver Module Own Inner Shield
EVERLIGHT

IRM-3733N3-E

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3733V

Logic Output Photo IC, ROHS COMPLIANT, PLASTIC PACKAGE-3
EVERLIGHT

IRM-3736

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3736A

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3736M

Infrared Receiver Control
EVERLIGHT

IRM-3736M3

Infrared Receiver Module
EVERLIGHT

IRM-3736N3

Infrared Remote control Receiver Module Own Inner Shield
EVERLIGHT

IRM-3736N3-E

Infrared Remote-control Receiver Module
EVERLIGHT

IRM-3736T

Infrared Remote-control Receiver Module
EVERLIGHT