IR12-206C/L268/TR8 [EVERLIGHT]

Infrared LED,;


型号：	IR12-206C/L268/TR8
厂家：	EVERLIGHT ELECTRONICS CO., LTD
描述：	Infrared LED, 光电
文件：	总9页 (文件大小：432K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Technical Data Sheet

Chip Infrared LED With Right Angle Lens

Preliminary

IR12-206C/L268/TR8

Features

․Small double-end package

․Package thickness is 0.6mm for side soldering

․Low forward voltage

․Good spectral matching to Si photo detector

․Pb free

․The product itself will remain within RoHS compliant version.

Descriptions

IR12-206C/L268/TR8 is an infrared emitting diode in miniature

SMD package which is molded in a water clear plastic

with right angle lens. The device is spectrally matched

with silicon photodiode and phototransistor.

Applications

․PCB mounted infrared sensor

Device Selection Guide

Chip

LED Part No.

Lens Color

Material

IR12-206C/L268/TR8

GaAlAs

Water Clear

Everlight Electronics Co., Ltd.

http://www.everlight.com

Rev 1

Page: 1 of 9

Device No：DIR-0000966

Prepared date：03-June-2013

Prepared by：Magic

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

Package Dimensions

Reco mmended Sol deri ng Patt er n

f or Si de Looker

Notes: 1.All dimensions are in millimeters

2.Tolerances unless dimensions ±0.1mm

Everlight Electronics Co., Ltd.

http://www.everlight.com

Prepared date：03-June-2013

Rev 1

Page: 2 of 9

Device No：DIR-0000966

Prepared by：Magic

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

Absolute Maximum Ratings (Ta=25℃)

Parameter

Symbol

Rating

Unit

Continuous Forward Current

I_F

Peak Forward Current

Reverse Voltage

I_FP

500

V_R

℃

Operating Temperature

Storage Temperature

Soldering Temperature

T_opr

T_stg

T_sol

-40 ~ +85

-40 ~ +100

260

Thermal resistance junction - ambient

mounted on PC-board (FR4)

K/W

R_thJ-A

P_d

540

Power Dissipation at(or below)

25℃Free Air Temperature

Notes: *1:I_FPConditions--Pulse Width≦100μs and Duty≦1%.

*2:Soldering time≦5 seconds.

Electro-Optical Characteristics (Ta=25℃)

Parameter

Radiant Intensity

Peak Wavelength

Spectral Bandwidth

Symbol

Condition

Min. Typ. Max. Unit

I_F=20mA

mW/sr

0.5

1.20

λp

I_F=20mA

I_F=50mA

940

Δλ

1.10 1.20 1.40

1.30 1.60

1.40 1.80

Forward Voltage

V_F

I_F=100mA

Pulse Width≦100μs ,Duty≦1%

V_R=5V

μA

Reverse Current

View Angle

I_R

I_F=20mA (X)

I_F=20mA (Y)

160

120

2θ1/2

deg

Everlight Electronics Co., Ltd.

http://www.everlight.com

Rev 1

Page: 3 of 9

Prepared by：Magic

Device No：DIR-0000966

Prepared date：03-June-2013

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

Fig.1 Forward Current vs.

Ambient Temperature

Fig.2 Spectral Distribution

Forward Current vs. Ambient Temperature

100

=20m A

Ta=25 ° C

-25

100

Ambient Temperature Ta (

℃

)

Fig.3 Peak Emission Wavelength

Ambient Temperature

Fig.4 Forward Current

vs. Forward Voltage

Forward Current vs. Forward Voltage

980

960

10³

10²

10¹

tp = 100

tp/T=0.01

μs

940

920

900

Forward Voltage VF(V)

-25

75 100

Everlight Electronics Co., Ltd.

http://www.everlight.com

Prepared date：03-June-2013

Rev 1

Page: 4 of 9

Prepared by：Magic

Device No：DIR-0000966

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

Typical Electro-Optical Characteristics Curves

Fig.5 Relative Intensity vs.

Forward Current

Relative Intensity vs. Forward Current

10²

10¹

10⁰

10¹

10²

10³

Forward Current (mA)

Everlight Electronics Co., Ltd.

http://www.everlight.com

Rev 1

Page: 5 of 9

Device No：DIR-0000966

Prepared date：03-June-2013

Prepared by：Magic

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd.

http://www.everlight.com

Rev 1

Page: 6 of 9

Device No：DIR-0000966

Prepared date：03-June-2013

Prepared by：Magic

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

Everlight Electronics Co., Ltd.

http://www.everlight.com

Rev 1

Page: 7 of 9

Device No：DIR-0000966

Prepared date：03-June-2013

Prepared by：Magic

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

Package Dimensions

Taping Dimensions

Unit:mm

Everlight Electronics Co., Ltd.

http://www.everlight.com

Rev 1

Page: 8 of 9

Device No：DIR-0000966

Prepared date：03-June-2013

Prepared by：Magic

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8

Packing Quantity Specification

1.2000Pcs/1Volume，1Volume/1Bag

2.10Boxes/1Carton

Label Form Specification

EVERLIGHT

CPN: Customer’s Production Number

P/N : Production Number

QTY: Packing Quantity

CAT: Ranks

CPN :

N : XXXXXXXXXXXXX

RoHS

XXXXXXXXXXXXX

QTY : XXX

CAT : XXX

HUE : XXX

REF : XXX

HUE: Peak Wavelength

REF: Reference

LOT NO : XXXXXXXXXX

Reference : XXXXXXXX

LOT No: Lot Number

MADE IN TAIWAN: Production Place

MADE IN TAIWAN

Notes

1. Above specification may be changed without notice. EVERLIGHT will reserve authority on

material change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions

for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for

any damage resulting from use of the product which does not comply with the absolute

maximum ratings and the instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of EVERLIGHT

corporation. Please don’t reproduce or cause anyone to reproduce them without

EVERLIGHT’s consent.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 6-8, Zhonghua Rd., Shulin Dist.,

New Taipei City 23860, Taiwan, R.O.C

Tel: 886-2-2685-6688

Fax: 886-2-2685-6699

http://www.everlight.com

Everlight Electronics Co., Ltd.

http://www.everlight.com

Prepared date：03-June-2013

Rev 1

Page: 9 of 9

Prepared by：Magic

Device No：DIR-0000966

Ver.:1 Release Date:06/08/2013 Confidential Level:一般狀態:Temp.Approved(暫時發行)

ꢀ

IR12-206C/L268/TR8 [EVERLIGHT]

相关型号：

IR12-21C-TR8

IR12-21C/TR8

IR1205S

IR1205SA

IR1209S

IR1209SA

IR1210

IR1212S

IR1212SA

IR1215S

IR1215SA

IR1254-R8