ALS-PDIC17-77B/TR8 [EVERLIGHT]

Linear Output Photo IC, 1.60 X 1.60 MM, 0.55 MM HEIGHT, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-6;
ALS-PDIC17-77B/TR8
型号: ALS-PDIC17-77B/TR8
厂家: EVERLIGHT ELECTRONICS CO., LTD    EVERLIGHT ELECTRONICS CO., LTD
描述:

Linear Output Photo IC, 1.60 X 1.60 MM, 0.55 MM HEIGHT, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-6

输出元件 光电
文件: 总13页 (文件大小:398K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Features  
Close responsively to the human eye spectrum  
Light to Current, analog output  
Good output linearity across wide illumination range  
Low sensitivity variation across various light sources  
Operating temperature performance, -40oC to 85oC  
Wide supply voltage range, 1.8V to 5.5V  
Size : 1.6mm(L)*1.6mm(W)*0.55mm(H)  
RoHS compliant, Pb Free and halogen free package  
Description  
The ALS-PDIC17-77B/TR8 is consisting of a photodiode and a current amplification IC. EVERLIGHT ALS series  
product is a good effective solution to the power saving of display backlighting of mobile appliances, such as the  
mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the  
ambient light sensor is close to that of human eyes.  
Applications  
Detection of ambient light to control display backlighting  
Mobile devices – mobile phones, PDAs  
Computing device – TFT LCD monitor for Notebook computer  
Consumer device – TFT LCD TV, plasma TV, video camera, digital camera, toys  
Automatic residential and commercial management  
Automatic contrast enhancement for electronic signboard  
Ambient light monitoring device for daylight and artificial light  
– Street light, CCD/CCTV  
Copyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026 Rev.6  
1
R
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Package Dimensions  
Top View  
Light Receiving Area  
Bottom View  
Unit : mm  
Tolerances : ±0.1mm  
2
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Absolute Maximum Ratings  
Parameter  
Symbol  
Vcc  
Rating  
-0.5~6.0  
Vcc-0.8  
0 ~ 5  
Unit  
V
Supply Voltage  
Output Voltage  
Vo  
V
IPH  
mA  
°C  
°C  
°C  
Output Photo Current  
Topr  
Tstg  
Tsol  
-40 ~ +85  
-40 ~ +100  
260  
Operating Temperature Range  
Storage Temperature Range  
Soldering Temperature Range [Note1]  
Note1: For detail reflow time and the recommended temperature profile, please refer to page 9.  
Recommended Operating Conditions  
Parameter  
Symbol  
Topr  
Min.  
-40  
Max.  
+85  
5.5  
Unit  
°C  
Operating Temperature  
Supply Voltage  
Vcc  
1.8  
V
3
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Electrical and Optical Characteristics (Ta=25)  
Parameter  
Symbol Min. Typ. Max.  
Unit  
Test Condition  
Vcc = 3V, Ev = 1000Lux  
Supply Current  
Icc  
ID  
--  
--  
480  
--  
950  
100  
80  
μA  
RL = 1kΩ  
[Note2]  
Dark Current  
Light Current  
nA  
Vcc=3V , Ev= 0Lux  
Vcc=3V; Ev= 100Lux  
IPH1  
40  
60  
μA  
[Note1] [Fig.2]  
Vcc=3V; Ev= 100Lux  
IPH2  
--  
96  
--  
μA  
[Note2] [Fig.2]  
Vcc=3V; Ev=1000Lux  
IPH3  
400  
--  
600  
1.6  
800  
--  
μA  
[Note1] [Fig.2]  
IPH2 / IPH1  
--  
--  
Photocurrent Ratio  
Vcc=3V; Ev= 100Lx,  
RL=150KΩꢀ  
Vo  
2.20 2.35  
--  
--  
V
[Fig.3]  
Saturation Output Voltage  
Peak Sensitivity  
Wavelength  
--  
580  
nm  
--  
λp  
--  
--  
--  
--  
75  
200  
150  
65  
--  
--  
--  
--  
μs  
μs  
μs  
μs  
tr  
tf  
Rise Time  
Vcc=3V,RL=5kΩ  
Ev = 1000 Lux  
Fall Time  
Switching  
[Fig.4]  
Time  
td  
ts  
Delay Time  
Storage Time  
Note:  
1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in  
mass production.  
2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp.  
4
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Fig.1 Block Diagram  
Fig.2  
Measurement Method of  
Light Current  
Fig.3 Measurement Method of Saturation  
Output Voltage  
Fig.4 Switching Time Measurement Method  
5
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Typial Electrical and Optical Characteristics Curves  
Fig.5 Light Current vs. Illuminance  
Fig.6 Dark Current vs. Temperature  
Fig.7 Light current vs. Temperature  
Fig.8 Light current vs. Supply Voltage  
1.6  
2.0  
1.8  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0.0  
Ta = 25  
VCE = 3V  
EV = 100 Lux  
1.2  
Light source: White LED  
0.8  
Light source: White LED  
Vcc = 3V  
0.4  
0.0  
2
3
4
5
6
7
-60  
-40  
-20  
0
20  
40  
60  
80  
100  
Supply voltage (V)  
Temperature ()  
Fig.9 Spectral Response  
Fig.10 Output Voltage vs. Illuminance  
100  
10  
1
Vcc = 3V  
Ta = 25  
80  
60  
40  
20  
0
Fluorescent light RL = 5.1 kΩ  
Incandescent lamp RL = 5.1 kΩ  
Fluorescent light RL = 30 kΩ  
Incandescent lamp RL = 30 kΩ  
0.1  
Fluorescent light RL = 100 kΩ  
Incandescent lamp RL = 100 kΩ  
0.01  
1E-3  
200  
300  
400  
500  
600  
700  
800  
900  
1000  
1100  
1200  
1
10  
100  
1000  
10000  
Illuminance (Lux)  
Wavelength (nm)  
6
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Fig.11 Consumption current vs. Illuminance  
Fig.12 Relative consumption current vs. Temperature  
7
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Converting Photocurrent to Voltage  
Vcc  
Current  
Amp  
Iph  
Vout  
GND  
CL  
RL  
Note:  
1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL)  
2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light,  
and output saturation voltage:  
Vout(max.) = Iout(max.) × RL Vout(saturation)Vcc0.8V  
3. To avoid 60Hz ripple from fluorescent lamps, we suggest that the time constant must be  
greater than 0.5 second:  
RL × CL 0.5 (empirical data)  
8
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Recommended method of storage  
1. Do not open moisture proof bag before devices are ready to use.  
2. Shelf life in sealed bag from the bag seal date:  
18 months at 10°C~30°C and < 90% RH.  
3. After opening the package, the devices must be stored at 10°C~30°C and 60%RH, and used within 1 year  
(floor life).  
4. If the moisture absorbent material (desiccant material) has faded or unopened bag has exceeded the shelf  
life or devices (out of bag) have exceeded the floor life, baking treatment is required.  
5. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure or recommend the following  
conditions:  
192 hours at 40°C +5/–0°C and < 5 % RH (reeled/tubed/loose units) or  
96 hours at 60°C ± 5°C and < 5 % RH (reeled/tubed/loose units) or  
24 hours at 125°C ± 5°C, not suitable for reel or tubes.  
Recommended Solder Profile  
Notice:  
(1) Reflow soldering should not be done more than two times.  
(2) When soldering, do not put stress on the devices during heating.  
(3) After soldering, do not warp the circuit board.  
9
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Soldering Iron  
Each terminal is to go to the tip of soldering iron temperature less than 350for 3 seconds within once in less  
than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal.  
Be careful because the damage of the product is often started at the time of the hand solder.  
Repairing  
Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head  
soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics  
of the device will or will not be damaged by repairing.  
10  
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Packing Quantity Specification  
4000 PCS/ 1 Reel  
Label Format  
CPN: Customer’s Production Number  
P/N : Production Number  
QTY: Packing Quantity  
CAT: Ranks  
Pb  
EVERLIGHT  
CPN :  
P N : XXXXXXXXXXXXX  
RoHS  
XXXXXXXXXXXXX  
QTY : XXX  
HUE: Peak Wavelength  
REF: Reference  
CAT : XXX  
HUE : XXX  
REF : XXX  
LOT No: Lot Number  
LOT NO : XXXXXXXXXX  
Reference : XXXXXXXX  
MADE IN TAIWAN: Production Place  
Reel Dimensions  
Unit: mm  
Tolerance: ±0.1mm  
11  
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Tape Dimensions  
Progressive direction  
12  
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  
DATASHEET  
Ambient Light Sensor  
Surface - Mount  
ALS-PDIC17-77B/TR8  
Note:  
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change  
for above specification.  
2. When using this product, please observe the absolute maximum ratings and the instructions for using  
outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting  
from use of the product which does not comply with the absolute maximum ratings and the instructions  
included in these specification sheets.  
3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please  
don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.  
13  
RCopyright © 2012, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No: DLS-0000026  
Rev.6  
www.everlight.com  
LifecyclePhase:  
Expired Period: Forever  

相关型号:

ALS-PDIC17-77C-TR8

Ambient Light Sensor
EVERLIGHT

ALS-PDIC17-77C/TR8

Linear Output Photo IC, 1.60 X 1.60 MM, 0.55 MM HEIGHT, HALOGEN FREE AND ROHS COMPLIANT PACKAGE-6
EVERLIGHT

ALS-PDIC17-79NB-TR8

I2 Digital Ambient Light Sensor
EVERLIGHT

ALS-PDIC243-3B

Ambient Light Sensor
EVERLIGHT

ALS-PDIC243-3C

Linear IC Output Optocoupler
EVERLIGHT

ALS-PDT144-6C-L451

3mm T-1 Ambient Light Sensor
EVERLIGHT

ALS-PDT144-6C/L451

Photo Transistor
EVERLIGHT

ALS-PDT243-3C-L451

5mm T-1 3/4 Ambient Light Sensor
EVERLIGHT

ALS-PDT243-3C/L451

Photo Transistor,
EVERLIGHT

ALS-PT144-6C

Analog Circuit, 1 Func, ROHS COMPLIANT PACKAGE-2
EVERLIGHT

ALS-PT19-315C

Surface - Mount Ambient Light Sensor
EVERLIGHT

ALS-PT19-315C-L177-TR8

Surface - Mount Ambient Light Sensor
EVERLIGHT