7383-R2C3-AMQB-X [EVERLIGHT]
˙Popular T-1 3/4 round package.; 流行的T-1 3/4圆包。
| 型号： | 7383-R2C3-AMQB-X |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | ˙Popular T-1 3/4 round package. |
| 文件： | 总10页 (文件大小：252K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Data Sheet
7383/R2C3-AMQB/X
Features
˙ Popular T-1 3/4 round package.
˙ Choice of various viewing angles.
˙ Available on tape and reel.
˙ Reliable and robust.
˙ ESD-withstand voltage: up to 4KV.
․The product itself will remain within RoHS compliant version.
Descriptions
˙ The series is specially designed for
applications requiring higher
brightness.
˙ The LED lamps are available with
different colors ,intensities, epoxy colors, etc.
Applications
˙ Status indicators.
˙ Commercial use.
˙ Advertising Signs.
˙ Back lighting.
Device Selection Guide
LED Part No.
7383/R2C3-AMQB
7383/R2C3-AMQB/P
Chip Mterial
AlGaInP
Emitted Color
Brilliant Red
Brilliant Red
Lens Color
Water Clear
Water Clear
Stopper
No
AlGaInP
Yes
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 1 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
Package Dimensions
Stopper type
No Stopper type
Notes:
˙ All dimensions are in millimeters, tolerance is 0.25mm except being specified.
˙ Lead spacing is measured where the lead emerges from the package.
˙ Protruded resin under flange is 1.5mm Max LED.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 2 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
IF
Rating
Units
mA
mA
℃
Forward Current
50
160
Pulse Forward Current*1
Operating Temperature
Storage Temperature
Electrostatic Discharge
Soldering Temperature*2
Power Dissipation
IFP
Topr
Tstg
ESD
Tsol
Pd
-40 ~ +85
-40 ~ +100
4K
℃
V
℃
260
120
mW
mA
V
Zener Reverse Current
Reverse Voltage
Iz
VR
100
5
Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10.
*2:Soldering time≦5 seconds.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Forward Voltage
Symbol Condition
Min.
1.8
5.2
2850
--
Typ.
2.0
--
Max.
Units
V
VF
Vz
IF=20mA
IZ=5mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
VR=5V
2.6
--
Zener Reverse Voltage
Luminous Intensity
Viewing Angle
V
IV
4500
30
7150
--
mcd
deg
nm
nm
nm
μA
2θ1/2
λp
λd
Δλ
IR
Peak Wavelength
Dominant Wavelength
--
632
624
20
--
618
--
628
--
Spectrum Radiation
Bandwidth
Reverse Current
--
--
50
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 3 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
Rank Combination (IF=20mA)
Rank
P
Q
R
S
Luminous Intensity
2850~3600
3600~4500
4500~5650
5650~7150
*Measurement Uncertainty of Luminous Intensity: ±10%
Unit: :mcd
Rank
1
2
3
4
Forward Voltage
1.8~2.0
2.0~2.2
2.2~2.4
2.4~2.6
*Measurement Uncertainty of Forward Voltage: ±0.1V
Unit:V
Rank
1
2
3
Dominant Wavelength
618~620
620~624
624~628
*Measurement Uncertainty of Dominant Wavelength ±1.0nm
Unit:nm
*The quantity ratio of the ranks is decided by EVERLIGHT.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 4 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
Typical Electro-Optical Characteristics Curves
Relative Intensity vs. Wavelength
Forward Current vs. Forward Voltage
1.0
0.8
0.6
0.4
0.2
0.0
50
40
30
20
10
0
450
500
550
600
650
700
1.0
1.5
2.0
2.5
3.0
3.5
Wavelength(nm)
Forward Voltage(V)
Relative Intensity vs. Ambient Temp.
Relative Intensity vs. Forward Current
2.0
1.5
1.0
0.5
0.0
2.5
2.0
1.5
1.0
0.5
0.0
25
30
35
40
45
50
55
60
65
70
0
10
20
30
40
50
Ambient Temperature Ta(OC)
Forward Current(mA)
Forward Current vs. Ambient Temp.
60
Radiation Characteristics
O
0O
90O
60O
30O
10
O
20
1.0
0.5
0
O
30
50
40
30
20
10
0
40O
O
50
O
60
70O
O
80
90O
1.0
0
20
40
60
80
100
0
0.5
Ambient Temperature Ta(OC)
Radiation Angle
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 5 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
Packing Specification
■ Anti-electrostatic bag
Label
Pb
E
M
L
E
G
C
TR
O
STATI
C
ELEC
T
R
O
N
A
G
R
N
ET
I
C
A
N
E
TI
C
O
R
R
A
D
I
O
A
C
TI
V
E
EL
D
S
anti-staticfor750
■ Inner Carton
■ Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Rank of Luminous Intensity and Forward Voltage
HUE: Rank of Dominant Wavelength
REF: Reference
■ Outside Carton
LOT No: Lot Number
MADE IN TAIWAN: Production Place
■ Packing Quantity
1. 500 PCS/1 Bag, 5 Bags/1 Inner Carton
2. 10 Inner Cartons/1 Outside Carton
Everlight Electronics Co., Ltd.
Device Number : DLE-0000741
Revision : 2
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 6 of 10
Prepared : Flourix Chen
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
Notes
1. Lead Forming
During lead formation, the leads should be bent at a point at least 3mm from the base of the
epoxy bulb.
Lead forming should be done before soldering.
Avoid stressing the LED package during leads forming. The stress to the base may damage the
LED’s characteristics or it may break the LEDs.
Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may
cause failure of the LEDs.
When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead
position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration of
the epoxy resin and this will degrade the LEDs.
2. Storage
The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from
Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or more,
they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture
absorbent material.
Please avoid rapid transitions in ambient temperature, especially, in high humidity environments
where condensation can occur.
3. Soldering
Careful attention should be paid during soldering. When soldering, leave more then 3mm from
solder joint to epoxy bulb, and soldering beyond the base of the tie bar is recommended.
Recommended soldering conditions:
Hand Soldering
300℃Max. (30W
DIP Soldering
100℃Max. (60 sec
Temp. at tip of
iron
Preheat temp.
Max.)
Max.)
3 sec Max.
Soldering time
Distance
Bath temp. & time
Distance
260 Max., 5 sec Max
3mm Min. (From
solder joint to epoxy
bulb)
3mm Min.(From
solder joint to
epoxy bulb)
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 7 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
laminar wave
Fluxing
Prehead
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Dip and hand soldering should not be done more than one time
After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or
vibration until the LEDs return to room temperature.
A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature.
Although the recommended soldering conditions are specified in the above table, dip or
handsoldering at the lowest possible temperature is desirable for the LEDs.
Wave soldering parameter must be set and maintain according to recommended temperature and
dwell time in the solder wave.
4. Cleaning
When necessary, cleaning should occur only with isopropyl alcohol at room temperature for a
duration of no more than one minute. Dry at room temperature before use.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 8 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of
ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the assembled
condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the
LED
5. Circuit Protection
Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises
to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through
the zener branch to keep the voltage at exactly Vz.
When the LED is connected using serial circuit, if either piece of LED is no light up but current
can’t flow through causing others to light down. In new design, the LED is parallel with zener
diode. if either piece of LED is no light up but current can flow through causing others to light
up.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 9 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
Technical Data Sheet
7383/R2C3-AMQB/X
6. Heat Management
Heat management of LEDs must be taken into consideration during the design stage of LED
application. The current should be de-rated appropriately by referring to the de-rating curve
found in each product specification.
The temperature surrounding the LED in the application should be controlled. Please refer to the
data sheet de-rating curve.
7. ESD (Electrostatic Discharge)
Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.
An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs.
All devices, equipment and machinery must be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs
plastic lens as a result of friction between LEDs during storage and handing.
8. Other
Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Prepared date:01-13-2009
Rev 2
Page: 10 of 10
Device Number : DLE-0000741
Prepared : Flourix Chen
Revision : 2
Release Date:2009-01-21 08:15:09.0
LifecyclePhase:
Expired Period: Forever
相关型号：
7383/A2C3-APSB/MS
Single Color LED, Super Sunset Orange, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
7383/A2C3-APSB/P/MS
Single Color LED, Super Sunset Orange, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
7383/B1C2-APSB/MS
Single Color LED, Super Green, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
7383/B1C2-APSB/P/MS
T-1 3/4 SINGLE COLOR LED, SUPER GREEN, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
7383/B1C3-AMQA/P/MS
Single Color LED, Blue, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明