7383/A2C3-APSB/P/MS [EVERLIGHT]
Single Color LED, Super Sunset Orange, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2;
| 型号： | 7383/A2C3-APSB/P/MS |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Single Color LED, Super Sunset Orange, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2 光电 |
| 文件： | 总8页 (文件大小：119K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Technical Data Sheet
7383/A2C3-APSB/X/MS
Features
․Popular T-1 3/4package.
․High efficiency.
․General purpose leads.
․Selected minimum intensities.
․Available on tape and reel.
․UV resistant epoxy
․ESD-withstand voltage: up to 4KV.
Descriptions
․The series is specially designed for applications
requiring higher brightness.
․The LED lamps are available with different
colors, intensities, epoxy colors,etc.
․Superior performance in outdoor environment
Applications
․Single or Dual Color Graphic Signs
․Message boards
․Variable message signs (VMS)
․Commercial outdoor advertising
Device Selection Guide
LED Part No.
Chip Material
Emitted Color
Lens Color
Stopper
No
7383/A2C3-APSB/MS
7383/A2C3-APSB/P/MS
AlGaInP
Super Sunset Orange Water Clear
Yes
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 1 of 8
Prepared by: Flourix Chen
Technical Data Sheet
7383/A2C3-APSB/X/MS
Package Dimensions
Stopper type
No Stopper type
Notes:
․All dimensions are in millimeters, tolerance is 0.25mm except being specified.
․Lead spacing is measured where the lead emerges from the package.
․Protruded resin under flange is 1.5mm Max LED.
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 2 of 8
Prepared by: Flourix Chen
Technical Data Sheet
7383/A2C3-APSB/X/MS
Absolute Maximum Rating (Ta=25℃)
Parameter
Forward Current
Symbol
Absolute Maximum Rating
Unit
IF
50
mA
Pulse Forward Current*1
IFP
160
mA
℃
℃
V
Operating Temperature
Storage Temperature
Electrostatic Discharge
Soldering Temperature*2
Reverse Voltage
Topr
Tstg
ESD
Tsol
VR
-40 ~ +85
-40 ~ +100
4K
260 ±5
℃
5
V
mA
mW
Zener Reverse Current
Power Dissipation
Iz
Pd
100
120
Notes: Soldering time≦5 seconds
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
IV
2850
--
7150
mcd
2θ1/2
λp
Viewing Angle
Peak Wavelength
--
--
--
--
30
621
615
18
--
--
--
--
deg
nm
IF=20mA
λd
Dominant Wavelength
Spectrum Half width
Δλ
Forward Voltage
Reverse Current
VF
IR
--
--
2.0
--
2.6
10
--
V
μA
V
VR=5V
Zener Reverse Voltage
VZ
5.2
--
IZ=5mA
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 3 of 8
Prepared by: Flourix Chen
Technical Data Sheet
7383/A2C3-APSB/X/MS
Rank Combination (IF=20mA)
Rank
P
Q
R
S
Luminous Intensity
2850~3600
3600~4500
4500~5650
Unit: :mcd
5650~7150
*Measurement Uncertainty of Luminous Intensity: ±15%
Rank
1
2
3
2.2~2.4
Unit:V
4
Forward Voltage
1.8~2.0
2.0~2.2
2.4~2.6
*Measurement Uncertainty of Forward Voltage: ±0.1V
Rank
6
7
8
Dominant Wavelength
610~613.5
613.5~617
617~620
*Measurement Uncertainty of Dominant Wavelength ±1.0nm
Unit:nm
*The quantity ratio of the ranks is decided by EVERLIGHT.
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 4 of 8
Prepared by: Flourix Chen
Technical Data Sheet
7383/A2C3-APSB/X/MS
Typical Electro-Optical Characteristics Curves
Relative Intensity vs. Wavelength
Forward Current vs. Forward Voltage
50
1.0
0.8
0.6
0.4
0.2
0.0
40
30
20
10
0
1.0
1.5
2.0
2.5
3.0
3.5
500
550
600
650
700
Forward Voltage(V)
Wavelength(nm)
Relative Intensity vs. Ambient Temp
Forward Current vs. Relative Intensity
2.0
1.5
1.0
0.5
0.0
2.5
2.0
1.5
1.0
0.5
0.0
25
30
35
40
45
50
55
60
65
70
0
10
20
30
40
50
Ambient Temperature Ta(OC)
Forward Current(mA)
Forward Current vs. Ambient Temp.
Radiation Characteristics
0O
90O
60O
30O
10O
60
50
40
30
20
10
0
20O
1.0
0.5
0
30O
40O
O
50
O
60
70O
80O
90O
1.0
0
20
40
60
80
100
0
0.5
Ambient Temperature Ta(OC)
Radiation Angle
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 5 of 8
Prepared by: Flourix Chen
Technical Data Sheet
7383/A2C3-APSB/X/MS
Packing Quantity Specification
1.500PCS/1Bag，5Bags/1Box
2.10Boxes/1Carton
Label Form Specification
EVERLIGHT
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CPN:
P/N:
CAT: Ranks of Luminous Intensity and Forward Voltage
HUE: Ranks of Dominant Wavelength
REF: Reference
7383/A2C3-APSB/X/MS
LOT No: Lot Number
QTY：
CAT:
HUE:
REF:
MADE IN TAIWAN: Production Place
LOT NO：
MADE IN TAIWAN
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 6 of 8
Prepared by: Flourix Chen
Technical Data Sheet
7383/A2C3-APSB/X/MS
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
4. When the LED is connected using serial circuit, if either piece of LED is no light up but current
can’t flow through causing others to light down. In new design, the LED is parallel with zener
diode. if either piece of LED is no light up but current can flow through causing others to light
up
5. Below the zener reference voltage Vz, all the current flows through LED and as the voltage
rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows
through the zener branch to keep the voltage at exactly Vz.
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 7 of 8
Prepared by: Flourix Chen
Technical Data Sheet
7383/A2C3-APSB/X/MS
6. Soldering Condition
Careful attention should be paid during soldering. When soldering, leave more then 3mm
from solder joint to case, and soldering beyond the base of the tie bar is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering
400℃Max. (30W
DIP Soldering
Temp. at tip of iron
Preheat temp.
Bath temp.
100℃Max. (60 sec Max.)
Max.)
Soldering time
Distance
3 sec Max.
265 Max.
3mm Min.(From solder Bath time.
joint to case)
5 sec Max.
Distance
3mm Min.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
Device Number : DLE-738-023
http\\:www.everlight.com
Prepared date: 12-17-2005
Rev 1
Page: 8 of 8
Prepared by: Flourix Chen
相关型号：
7383/B1C2-APSB/MS
Single Color LED, Super Green, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
7383/B1C2-APSB/P/MS
T-1 3/4 SINGLE COLOR LED, SUPER GREEN, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
7383/B1C3-AMQA/P/MS
Single Color LED, Blue, Water Clear, T-1 3/4, 5mm, ROHS COMPLIANT, PLASTIC PACKAGE-2
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明