19-21-GHC-YN1P2QY-3T [EVERLIGHT]
0603 Package Chip LED (0.8mm Height); 0603封装贴片LED( 0.8毫米高)型号: | 19-21-GHC-YN1P2QY-3T |
厂家: | EVERLIGHT ELECTRONICS CO., LTD |
描述: | 0603 Package Chip LED (0.8mm Height) |
文件: | 总10页 (文件大小:233K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical Data Sheet
0603 Package Chip LED (0.8mm Height)
19-21/GHC-YN1P2QY/3T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain with RoHS compliant version.
Descriptions
․The 19-21 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Emitted Color
Brilliant Green
Resin Color
Material
19-21/GHC-YN1P2QY/3T
InGaN
Water clear
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 1 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Package Outline Dimensions
-
+
0.8
0.4
0.4
Note: The tolerances unless mentioned is ±0.1 ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 2 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
Rating
Unit
V
VR
IF
5
Forward Current
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
Power Dissipation
IFP
100
mA
Pd
95
mW
V
Electrostatic Discharge(HBM)
Operating Temperature
Storage Temperature
ESD
Topr
Tstg
150
-40 ~ +85
-40 ~ +90
℃
℃
Reflow Soldering : 260℃ for 10sec.
Hand Soldering : 350℃ for 3 sec..
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol Min.
Typ. Max.
Unit Condition
Luminous Intensity
Viewing Angle
mcd
deg
nm
Iv
2θ1/2
λp
28.5
----
-----
100
518
72.0
----
Peak Wavelength
Dominant
Wavelength
Spectrum Radiation
Bandwidth
----
----
IF =5mA
nm
520
----
----
35
535
----
λd
△λ
VF
nm
V
Forward Voltage
Reverse Current
2.7
----
----
----
3.2
50
VR =5V
IR
μA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 3 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Bin Range Of Dom. Wavelength
Group
Bin
X
Min
520
525
530
Max
525
530
535
Unit
nm
Condition
IF =5mA
Y
Y
Z
Bin Range Of Luminous Intensity
Bin
N1
N2
P1
Min
28.5
36.0
45.0
57.0
Max
Unit Condition
36.0
45.0
57.0
72.0
mcd
IF =5mA
P2
Bin Rang Of Luminous Voltage
Unit
Group
Bin
29
Min
2.70
2.80
2.90
3.00
3.10
Max
2.80
Condition
30
2.90
3.00
3.10
3.20
Q
31
V
IF=5mA
32
33
Notes:
1.Tolerance of Luminous Intensity: ±11%
2.Tolerance of Dominant Wavelength: ±1nm
3.Tolerance of Forward Voltage ±0.05V
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 4 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Typical Electro-Optical Characteristics Curves
Ta=25°C
Ta=25°C
Wavelength λ(nm)
Forward Voltage V (V)
F
Ta=25°C
1000
100
10
1
60
80 100
-60 -40 -20
0
20 40
)
Ambient Temperature T (°C
Forward Current I (mA)
a
Ta=25°C
Ambient Temperature T (°C )
a
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 5 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm.
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 6 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 7 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Hours/Cycles
Sample
Size
No.
1
Items
Test Condition
Ac/Re
0/1
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
0/1
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 8 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 9 of 10
Prepared by: YangPeng
19-21/GHC-YN1P2QY/3T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-0002652
http://www.everlight.com
Prepared date:20-Aug-2010
Rev.2
Page: 10 of 10
Prepared by: YangPeng
相关型号:
©2020 ICPDF网 联系我们和版权申明