15-21UYC/S530-XX/TR8 [EVERLIGHT]
Chip LEDs; LED芯片
| 型号： | 15-21UYC/S530-XX/TR8 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Chip LEDs |
| 文件： | 总9页 (文件大小：149K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
1206 Package Chip LEDs
15-21UYC/S530-XX/TR8
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS complaint version.
Descriptions
․The 15-21 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher
packingdensity, reduced storage space and
finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Part No.
Lens Color
Material
Emitted Color
15-21UYC/S530-XX/TR8
AlGaInP
Brilliant Yellow
Water Clear
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 1 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Package Outline Dimensions
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 2 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Reverse Voltage
Symbol
VR
Rating
5
Unit
V
mA
℃
Forward Current
IF
25
Operating Temperature
Storage Temperature
Electrostatic Discharge(HBM)
Power Dissipation
Topr
Tstg
ESD
Pd
-40 ~ +85
-40~ +90
2000
℃
V
60
mW
Peak Forward Current
(Duty 1/10 @1KHz)
IF
60
mA
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
*Chip
Parameter
Symbol
Min.
Typ.
Max. Unit Condition
Rank
A2
15
36
39
57
-----
-----
A3
Luminous Intensity
Iv
mcd
A4
51
77
-----
-----
-----
-----
-----
A5
62
98
A6
77
113
130
591
Viewing Angle
Peak Wavelength
2θ1/2
λp
-----
-----
-----
-----
deg
nm
IF=20mA
Dominant Wavelength
λd
-----
-----
-----
-----
-----
-----
1.7
589
15
-----
-----
2.4
nm
Spectrum Radiation
Bandwidth
△λ
nm
V
Forward Voltage
VF
2.0
-----
VR=5V
Reverse Current
IR
-----
10
μA
*15-21UYC/S530-XX/TR8
Chip Rank
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 3 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Typical Electro-Optical Characteristics
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 4 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel Dimensions
Note: The tolerances unless mentioned are ±0.1, Unit = mm.
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 5 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 6 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
Reflow Soldering
22 Pcs. 0/1
22 PCS. 0/1
6 Min.
5 sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
1000 Hrs.
3
4
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Temp. : 100℃
Low Temperature
Storage
Temp. : -40℃
IF = 20 mA
5
6
7
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
1000 Hrs.
1000 Hrs.
1000 Hrs.
DC Operating Life
High Temperature /
High Humidity
85℃/85%RH
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 7 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Rev
1
Page: 8 of 9
Prepared date: 19-Aug-2005
Prepared by: Meng Yali
EVERLIGHT ELECTRONICS CO.,LTD.
15-21UYC/S530-XX/TR8
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No:SZDSE-151-023
http://www.everlight.com
Prepared date: 19-Aug-2005
Rev
1
Page: 9 of 9
Prepared by: Meng Yali
相关型号：
15-22SDRSYGC/S530-A3/E2/TR8
Dual Color LED, Super Deep Red/super Yellow Green, Water Clear, 2.7mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
15-22SURSYGC/S530-A2/TR8
Dual Color LED Array, Brilliant Red/brilliant Yellow Green, Water Clear, 2.7mm, ROHS COMPLIANT, SMD, 4 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明