15-23B/R6G6BHC-A01/2T [EVERLIGHT]
Full Color Chip LEDs; 全彩贴片发光二极管
| 型号： | 15-23B/R6G6BHC-A01/2T |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Full Color Chip LEDs |
| 文件： | 总12页 (文件大小：213K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Full Color Chip LEDs
15-23B/R6G6BHC-A01/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Full-color type.
Descriptions
․The 15-23B SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Lens Color
Type
R6
Material
AlGaInP
InGaN
Emitted Color
Brilliant Red
Water Clear
G6
Brilliant Yellow Green
Blue
BH
InGaN
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 1 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Package Outline Dimensions
Notes: Tolerances Unless Dimension ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 2 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
V
Reverse Voltage
VR
5
R6:25
G6:25
BH:25
Forward Current
IF
mA
Operating Temperature
Storage Temperature
Topr
Tstg
-40 ~ +85
℃
℃
-40 ~ +90
260 (for 5
seconds)
R6:2000
G6:150
BH:150
R6:60
Soldering Temperature
Tsol
℃
Electrostatic Discharge
ESD
V
Power Dissipation
Pd
G6:110
BH:110
R6:60
mW
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IF P
G6:100
BH:100
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 3 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
72
Typ.
100
50
Max.
180
90
Unit Condition
mcd
R6
Luminous Intensity
Iv
G6
28.5
28.5
BH
50
90
Viewing Angle
2θ1/2
-----
120
632
575
468
-----
deg
nm
R6
G6
BH
R6
Peak Wavelength
λp
λd
-----
-----
619
568
465
629
575
480
G6
BH
Dominant Wavelength
IF=20mA
nm
-----
R6
20
20
25
Spectrum Radiation
Bandwidth
△λ G6
-----
-----
nm
V
BH
R6
2.0
2.0
3.5
2.4
2.4
3.9
VF
IR
G6
Forward Voltage
Reverse Current
-----
-----
BH
R6
G6
BH
10
10
50
VR=5V
-----
μA
Notes:
1.Tolerance of Luminous Intensity ±10%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 4 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Typical Electro-Optical Characteristics Curves
R6
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 5 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Typical Electro-Optical Characteristics Curves
G6
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 6 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Typical Electro-Optical Characteristics Curves
BH
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 7 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 8 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 9 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 240℃±5℃
Reflow Soldering
22 PCS. 0/1
22 PCS. 0/1
6 Min.
5sec.
H : +100℃ 15min
300 Cycles
2
Temperature Cycle
Thermal Shock
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
300 Cycles
3
4
22 PCS. 0/1
22 PCS. 0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS. 0/1
22 PCS. 0/1
22 PCS. 0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/R.H85%
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 10 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Lead solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 11 of 12
Prepared by: Jeff Tsai
EVERLIGHT ELECTRONICS CO.,LTD.
15-23B/R6G6BHC-A01/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No:DSE-153-
http://www.everlight.com
Prepared date: 09-08-2003
Rev 1.0
Page: 12 of 12
Prepared by: Jeff Tsai
相关型号：
©2020 ICPDF网 联系我们和版权申明