EUP8095(10TDFN) [EUTECH]

Power Management Circuit;
EUP8095(10TDFN)
型号: EUP8095(10TDFN)
厂家: EUTECH MICROELECTRONICS INC    EUTECH MICROELECTRONICS INC
描述:

Power Management Circuit

文件: 总1页 (文件大小:124K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EUP8095  
1.5A Linear Li-Ion/Polymer Charger IC  
with Integrated FET and Charger Timer  
FEATURES  
DESCRIPTION  
z
z
Very Low Power Dissipation  
The EUP8095 series are highly integrated single cell  
Li-Ion/Polymer battery charger IC designed for handheld  
devices. This charger is designed to work with various  
types of AC adapters or a USB port and capable of  
operating with an input voltage as low as 2.65V.  
Accepts Multiple Types of Adapters or USB BUS  
Power  
z
Integrated Power FET and Current Sensor for Up  
to 1.5A Charge Applications  
The EUP8095 operates as a linear charger and charges the  
battery in three phases: trickle current, constant current,  
and constant voltage. When AC-adapter is applied, an  
external resistor sets the magnitude of the charge current,  
which may be programmed up to 1.5A with TDFN10  
package and a current-limited adapter for lowest power  
dissipation.  
z
z
Guaranteed to Operate at 2.65V After Start-Up  
Charge Termination by Minimum Current and  
Time  
z
z
Precharge Conditioning With Safety Timer  
Reverse Leakage Protection Prevents Battery  
Drainage  
The EUP8095 features thermal regulation loop to control  
charge current to keep safe operation when PCB lacked of  
enough heat-sinking. A programmable charge timer  
provides a backup safety for termination. The EUP8095  
automatically re-starts the charge if the battery voltage  
falls below an internal threshold and automatically enters  
sleep mode when DC supplies are removed. No external  
sense resistor or blocking diode is required for charging. A  
NTC thermistor interface is used for charging the battery  
in a safe temperature range.  
z
z
Charge Current Thermal Regulation  
Status Outputs for LED or System Interface  
Indicates Charge and Fault Conditions  
z
z
Optional Battery Temperature Monitoring Before  
and During Charge  
Automatic Sleep Mode for Low-Power  
Consumption  
z
z
Available in 3mm× 3mm TDFN-10 Package  
RoHS Compliant and 100% Lead (Pb)-Free  
APPLICATIONS  
z
z
z
z
PDAs, Cell Phones and Smart Phones  
Portable Instruments.  
Stand-Alone Charger.  
USB Bus Powered Charger.  
Typical Application Circuit  
Figure 1.  
DS8095 Ver 0.1 July 2008  
1

相关型号:

EUP8202

Switch Mode Li-Ion/Polymer Battery Charger
EUTECH

EUP8202-42DIR1

Switch Mode Li-Ion/Polymer Battery Charger
EUTECH

EUP8202-42JIR1

Switch Mode Li-Ion/Polymer Battery Charger
EUTECH

EUP8202-84DIR1

Switch Mode Li-Ion/Polymer Battery Charger
EUTECH

EUP8202-84JIR1

Switch Mode Li-Ion/Polymer Battery Charger
EUTECH

EUP8207-4.2

Switch Mode Li-Ion/Polymer Battery Charger
EUTECH

EUP9232

LI-ION/POLYMER TWO CELL PROTECTOR
EUTECH

EUP9232AAQIR1

LI-ION/POLYMER TWO CELL PROTECTOR
EUTECH

EUP9232ABQIR1

LI-ION/POLYMER TWO CELL PROTECTOR
EUTECH

EUP9232ACQIR1

LI-ION/POLYMER TWO CELL PROTECTOR
EUTECH

EUP9232ADQIR1

LI-ION/POLYMER TWO CELL PROTECTOR
EUTECH

EUP9232AEQIR1

LI-ION/POLYMER TWO CELL PROTECTOR
EUTECH