THS3014-TK [ETC]
Handheld Oscilloscopes;Handheld Oscilloscopes
THS3000 Series Datasheet
Key features
21 automatic measurements
Waveform math and FFT spectral analysis
Volts, time, frequency, watts cursor measurements
™
Measurement data logging with TrendPlot
Waveform pass/fail limit testing
Automatic 100 display screens recorder
6 in. (153 mm) bright color display
USB device and host support
7 hours of continuous battery operation
Applications
Embedded analog and digital design
Power devices, power electronics, and power supply design
Automotive and avionics design and maintenance
Industrial equipment design and installation
Field test and service
With 4 isolated channels and up to 7 hours of battery life, the lightweight
THS3000 Handheld Oscilloscope Series enables you to safely make
floating or differential measurements on your bench or in the field. Now you
can tackle tough environments with the performance you expect from
Tektronix - safely and affordably.
Accurately measure your signals
With up to 200 MHz bandwidth, 4 channels, and 5 GS/s maximum sample
rate, no other oscilloscope offers as much bandwidth and sample rate in a
portable handheld form factor. The THS3000 Handheld Oscilloscope Series
has 10,000 points record length per channel, enabling you to capture more
signal information at higher sample rates to clearly see signal details. For
applications where it is important to measure slow-changing signals over
long time periods, the THS3000 Series offers Roll mode that extends the
record length to 30,000 points of signal information.
Key performance specifications
100 MHz or 200 MHz bandwidth Models
Maximum sample rates up to 5 GS/s and 200 ps resolution
4 fully isolated and floating channels
600 VRMS CAT III, 1000 VRMS CAT II rated inputs (BNC to earth ground)
Datasheet
Input signal and float voltage maximum safety ratings
Selecting the right probe
Scope/Probe Maximum safety rating
(attenuation)
THS3000 viewable signal
Reference
Input signal On-screen P- On-screen
float safety safety rating P voltage
rating
RMS voltage
Four isolated input channels easily handle any type of mixed signal inputs
THS3000 (1X 600 VRMS
300 VRMS
CAT III
800 Vp-p
282 VRMS
input)
CAT III
Safely make floating and differential
measurements
1000 VRMS
CAT II
THP0301
(10X)
300 VRMS
CAT III
300 VRMS
CAT III
849 Vp-p
300 VRMS
1000 VRMS
1000 VRMS
PP5122
(100X)
600 VRMS
CAT II
1000 VRMS
CAT III
2828 Vp-p
2828 Vp-p
P5122 (100X) 600 VRMS
CAT II
1000 VRMS
CAT III
Fast analysis of your device
The THS3000 Handheld Oscilloscope Series is packed with analysis tools
to help you validate your device's operation and identify issues quickly. With
waveform math, you can add, subtract, or multiply any of your signals to
investigate instantaneous power or look at gain. Vertical and horizontal
cursors allow you to look at a specific point on your waveform for accurate
measurements of voltage, current, time, or frequency. With 21 automated
measurements, you can make common measurements quickly and
accurately. The built-in Fast Fourier Transform (FFT) function allows you to
see the frequency spectrum of your signal, revealing signal interference,
crosstalk, or switching noise.
Isolated-channel technology is specified to 1000 VRMS maximum float voltage
Making accurate and safe measurements on power electronics, power
semiconductors, and other electronics applications can be challenging
when the signal reference is floating and not referenced to earth ground.
When your signal ranges from low voltage to high voltage (kV) or you must
use probing techniques that can potentially create ground loops, the
problem is compounded.
To enable floating measurements, the THS3000 Series is architecturally
different than most other oscilloscopes. All input channels are fully isolated
from the main chassis and from each other. Additionally the power adapter
and USB interface are fully isolated to ensure safe measurements and
eliminate the risk of unintentional grounding or accidental short circuits.
When configured with the proper probes you can be assured you'll be able
to make quick, safe, and accurate measurements.
2 www.tektronix.com
Handheld Oscilloscopes – THS3000 Series
™
Find intermittent faults with TrendPlot
Waveform limit testing
Analyze measurements and recordings visually or using measurement cursors
User-defined limit testing can easily identify random waveform anomalies
Intermittent faults can be caused by timing errors, temperature changes,
environmental influences, or simply broken wiring or connectors. The
TrendPlot function helps you find those faults by plotting minimum and
maximum measurement values over time. You can select up to
4 measurements and plot any combination of voltages, amps, frequency,
time, and phase for any or all four inputs, all with time capture information.
The THS3000 Series can automatically monitor your signals and output
Pass or Fail results by judging whether the input waveform is within
predefined boundaries. User selections can include testing one or all input
channels and automatic recording of Pass or Fail data. Data can easily be
reviewed using the Replay mode or stored externally to a USB memory
device.
™
Automatic capture and data logging of 100 display
screens
Complete solution for power measurements
Easily calculate the instantaneous power by multiplying voltage and current waveforms
Playback of captured data is quick and easy with the THS3000 series oscilloscopes
For performing power measurement on motor drives, power converters/
inverters, and power semiconductor devices the THS3000 Series is
equipped to handle most common measurements. For basic debugging, the
isolated input channels can be used with a variety of voltage and current
probes. Each input channel can be configured to match the probe type and
attenuation ensuring correct measurements and cursor readings. Four
channels allow for easy measurements of three-phase power or
simultaneous capture of digital control and power signals.
Capturing random or changing signals can often be difficult. The THS3000
Series greatly simplifies any type of waveform data logging by continuously
capturing 100 display screens. Each screen capture can include multiple
channels and math waveforms, each with its own time stamp. Data capture
can also be tailored to specific events by selection of qualified trigger
conditions. Playback is quick and easy with the automatic replay of all
captured screens or only the screens you select.
www.tektronix.com
3
Datasheet
Measurements on power conversion electronics usually require probes with
higher voltage ratings. Tektronix offers a passive probe with insulation
systems specifically designed for making floating measurements. The
standard THP0301-X can measure up to 849 Vp-p (300 VRMS). Optional
P5122 probes, when coupled with the THS3000 Series, are suitable for
making measurements on 1000 VRMS devices in Category II environments,
with a maximum float voltage of up to 600 VRMS relative to earth ground.
Designed to make your work easier
Intuitive operation
The THS3000 Handheld Oscilloscope Series has a front-panel layout and
an intuitive user interface which makes the instrument easy to use, reducing
learning time and increasing efficiency. For initial setup or for situations
where you're constantly changing connection points, the THS3000 Series
has a single-button Autoset and Autorange feature which can automatically
set up the trigger system and adjust vertical and/or horizontal oscilloscope
settings.
The standard USB ports facilitate data storage, data transfer, and instrument control
The THS3000 Series oscilloscopes come with both a USB host and USB
mini port located on the side panel enabling you to quickly and easily save
instrument settings, screenshots, and waveform data onto a flash device or
transfer the data directly to a PC. The THS3000 Series is shipped with the
Tektronix OpenChoice® desktop software, allowing you to integrate your
new THS3000 Series oscilloscope into existing measurement systems and
take advantage of extended functionalities in data acquisition, measurement
analysis, and documentation.
Easy to use
The bright color display makes it easy for you to see the signals you're
measuring. Each waveform is color coded and designed to correspond to
the colors on the input probe connectors, the front-panel channel selector
buttons, and the individual probes which are colored at both ends. By
matching the colors during setup you'll be assured you can easily identify
your waveforms.
Versatility and portability for wherever your
job takes you
For setup assistance user messages are available in 11 user-selectable
languages including English, French, German, Spanish, Portuguese, Italian,
Japanese, Simplified and Traditional Chinese, Korean, and Russian.
Flexible data transfer
®
Tektronix OpenChoice desktop software extends the capabilities of your instrument
The optional travel kit (TK) version includes a hard-sided carry case for your instrument,
accessories, and storage space for a laptop PC.
4 www.tektronix.com
Handheld Oscilloscopes – THS3000 Series
With a battery life of 7 hours and a weight of only 4.8 lb. (2.2 kg) the
THS3000 Handheld Oscilloscope Series offers ultimate portability.
Measurements taken in the lab can now be conveniently correlated with
those taken in the field - all on the same instrument. Rated IP41, the
THS3000 Series features the ruggedness needed to go beyond the lab and
into industrial and field environments. The optional travel kit comes with a
hard-sided carrying case and useful accessories allowing you to take the
THS3000 Series on the road securely and conveniently. From the lab to the
field, the THS3000 Handheld Oscilloscope Series offers you the versatility
of using a single, high-performance instrument suitable for a wide range of
working environments.
Performance you can count on
In addition to industry-leading service and support, every THS3000 Series
oscilloscope comes backed with a three-year standard warranty, and ships
with a Certificate of Traceable Calibration Standard.
www.tektronix.com
5
Datasheet
Specifications
Specifications apply to all models unless noted otherwise.
Model overview
THS3014
THS3024
4
Isolated input channels
Analog bandwidth (-3 dB)
Rise time
4
100 MHz
200 MHz
1.7 ns
3.5 ns
Hardware bandwidth limits
Float voltage
20kHz, 20 MHz, or full
1000 VRMS CAT II / 600 VRMS CAT III from BNC shell to earth ground
2.5 GS/s (1.25 GS/s 4-ch) 5 GS/s (1.25 GS/s 4-ch)
Maximum sample rate
Maximum record length (all channels) 10,000 points (30,000 points in roll mode (4 ms to 2 min / div))
Vertical system
Input coupling
AC, DC
Input impedance
1 MΩ ±1%, 14 pF ±2 pF
Input sensitivity range
Vertical resolution
DC gain accuracy
Max BNC input voltage
2 mV/div to 100 v/div
8 bits
±2.1% of reading +0.04 × range/div for 5 mV/div to 100 V/div
(1 MΩ) 300 VRMS CAT III from BNC signal to BNC shell
Max probe voltage (with standard 300 VRMS CAT III from 10:1 probe tip signal to BNC and reference lead
THP0301-X probe)
Trace positioning
±4 divisions
Horizontal system
Time base range (s/div)
THS3014
2 ns to 4 s
1 ns to 4 s
THS3024
Delay time range
Timing accuracy
Zoom
1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger
±100 ppm + 0.04 div
Horizontally expand or compress a live or stopped waveform
Trigger system
Input source
Channel 1, 2, 3, or 4. All input references isolated from each other and earth ground
Auto-level, Auto, Normal, and Single
Main trigger modes
Trigger coupling
DC, HF reject, Noise reject (reduces sensitivity)
Trigger sensitivity, internal DC
coupled
0.5 divisions from DC to 5 MHz at >5 mV/div
THS3024
THS3014
1 divisions >5 MHz to 200 MHz (THS3024)
1 divisions >5 MHz to 100 MHz
6 www.tektronix.com
Handheld Oscilloscopes – THS3000 Series
Trigger level range
Any channel
±4.0 divisions
Trigger modes
Edge
Positive, negative, or dual slope on any input channel. Coupling includes DC, HF reject, and Noise reject
Pulse width
Trigger on channel 1, width of positive or negative pulses (glitches) that are >, <, =, or ≠ a specified period of time (resolution of
0.01 div with minimum time of 50 ns)
Event
Trigger on n-th occurrence of trigger (N selectable from 2 to 99)
Video
Trigger on channel 1, line number, all lines, odd, even, or all fields on NTSC, PAL, PAL plus, and SECAM signals
Trigger on channel 1, high-res non-interlaced video with line frequencies from 14 kHz to 65 kHz
Non-interlaced
Acquisition modes
Sample (default)
Glitch detect
Acquire sampled values
Captures high frequency or glitches as narrow as 8 ns from 5 μs to 120 s / div
Selectable from 2, 4, 8, or 64 waveforms
Averaging
Roll
Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 4 ms/div
Automatic data logging of 100 triggered records (screens) with date and time stamp. store internally or to a USB device
Data recorder
Waveform compare
Visually compare against user-definable reference waveforms or perform automatic pass or fail testing of 1 to 4 channels with data
logging of test results
Automatic setup
Autoset
Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems
Continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes
Autorange
Waveform measurements
Cursors
Time, freq (1/T), volts, watts, Rise/Fall time from any input channel or math waveform
21. Up to 4 can be displayed on-screen at any one time. Measurements include:
Automatic measurements
V DC, V ACRMS, V AC+DC, VPeak Max, VPeak Min, Peak to Peak, A DC, A AC, A AC+DC, Frequency, Rise time (using cursors), Fall
time (using cursors), Phase (between any 2 inputs), Positive pulse width, Negative pulse width, Positive duty cycle, Negative duty
cycle, dBV, dBm into 50 Ω and 600 Ω
™
TrendPlot
Records and graphically displays any 4 automatic scope measurements. store internally or to USB flash drive for recall and analysis
Waveform math
Arithmetic
Add, subtract, and multiply waveforms
FFT
Spectral magnitude. Set FFT vertical scale to Linear or Logarithmic, and FFT window to Automatic, Hamming, Hanning, or None
www.tektronix.com
7
Datasheet
Display system
Display type
6 in. (153 mm) liquid-crystal color display
320 horizontal × 240 vertical pixels
Display resolution
Waveform style
Display format
Vectors (dot-join), Dots, Envelope, Variable persistence, Infinite persistence
YT and XY
Storage memory
Reference
4 user-definable reference traces
Waveform
Stores 30 internal scope records (4 traces each) with screen image and corresponding setup
™
Recording
Store 10 internal recordings that can be a 100-screen replay sequence, a roll-mode recording, or a TrendPlot measurement
recording
Screen image
Store up to 9 internally or 256 BMP images to an external USB storage drive
Time and date stamp of all stored data
Real-time clock
Input/Output ports
USB host port
Supports USB mass storage devices
USB device port
Mini-USB-B connector allows for communication/control of oscilloscope
Probe compensator output
Amplitude
Side-panel output –
1.225 Vp-p
Frequency
500 Hz
Kensignton-style lock
Side-panel security slot connects to standard Kensington-style lock
Software
®
OpenChoice Desktop
Enables fast and easy communication between a windows PC and the THS3000 series. Transfer and save settings, waveforms,
and screen images
Power source
Battery
7 hour, 10.8 v rechargeable Li-Ion battery
5 hours
Battery charging time
Line power
AC power adapter/charger
100 v to 240 v AC ±10%
50 hz to 60 hz
Power source voltage
Power source frequency
8 www.tektronix.com
Handheld Oscilloscopes – THS3000 Series
Physical characteristics
Dimension
Height
265 mm (10.5 in.)
190 mm (7.5 in.)
70 mm (2.8 in.)
Width
Depth
Weight
Net
2.2 kg (4.8 lb.)
4.7 kg (10.4 lb.)
7.8 kg (17.1 lb.)
Shipping (base model)
Shipping (TK model)
Environmental
Enclosure
IP 41 according to IEC60529S
0 °C to +40 °C (with battery)
Temperature
Operating
0 °C to +50 °C (without battery)
–20 °C to +60 °C
Nonoperating
Humidity
Operating
0 °C to 10 °C, noncondensing
10 °C to 30 °C, up to 95% relative humidity
30 °C to 40 °C, up to 75% relative humidity
40 °C to 50 °C, up to 45% relative humidity
Nonoperating
–20 °C to 60 °C, relative humidity, noncondensing
Altitude
Operating
Nonoperating
Up to 3,000 m (9,843 ft.)
Up to 12,000 m (39,370 ft.)
Vibration/Shock
Operating
Vibration (Sinusoidal): 3 g max, according to MIL-PRF-28800F, class 2
Shock: 30 g max, according to MIL-PRF-28800F, class 2
Nonoperating
Regulatory
Vibration (Random): 0.03 g2/Hz, according to MIL-PRF-28800F, class 2
Electromagnetic compatibility EN 61326-1:2006, EN 61326-2-1:2006 for emission and immunity
Safety UL61010-1:2004; CAN/CSA C22.2 No. 61010.1-04; EN61010-1:2001, Pollution degree 2; ANSI/ISA-82.02.01
www.tektronix.com
9
Datasheet
Ordering information
THS3000 models
THS3014
100 MHz, 2.5 GS/s, 4-channel handheld oscilloscope
THS3014-TK
THS3024
100 MHz, 2.5 GS/s, 4-channel handheld oscilloscope with travel kit
200 MHz, 5 GS/s, 4-channel handheld oscilloscope
THS3024-TK
200 MHz, 5 GS/s, 4-channel handheld oscilloscope with travel kit
All models include: THP0301-Y/B/M/G 300 MHz 10X passive probes, lithium-ion battery with 7-hour battery life, carrying handle, hanging strap, USB-A to mini USB-B cable
for PC communication, Installation/Safety manual, documentation CD 1, AC power adapter with power cord, ACHHS soft-sided carry case (standard with non-TK, optional for -
®
TK models), OpenChoice desktop PC communication software, calibration certificate documenting traceability to national metrology institute(s) and ISO9001 quality system
registration, three-year warranty.
TK models also include: hard-sided travel case (instead of soft case), soft-sided probe case, 2 probe replacement accessory kits.
Please specify power plug when ordering
Warranty
Three-year warranty covering all parts and labor, excluding probes.
Instrument options
International power plugs
Opt. A0
Opt. A1
Opt. A2
Opt. A3
Opt. A4
Opt. A5
Opt. A6
Opt. A10
Opt. A11
North America power plug (115 V, 60 Hz)
Universal Euro power plug (220 V, 50 Hz)
United Kingdom power plug (240 V, 50 Hz)
Australia power plug (240 V, 50 Hz)
North America power plug (240 V, 50 Hz)
Switzerland power plug (220 V, 50 Hz)
Japan power plug (100 V, 110/120 V, 60 Hz)
China power plug (50 Hz)
India power plug (50 Hz)
Service options
Opt. SILV400
Standard warranty extended to 5 years
1
Documentation CD available in English, German, Korean, Japanese, Simplified Chinese, Traditional Chinese, and Russian (063-4379-xx).
10 www.tektronix.com
Handheld Oscilloscopes – THS3000 Series
Recommended accessories
Accessories
Accessory
THSBAT
Description
Additional spare battery
THSCHG
ACHHS
Battery charger (does not include AC power adapter)
Instrument soft case
HCHHS
Instrument hard case (standard with TK models)
Versatile hanging hook
376-0255-xx
020-3085-xx
119-7900-xx
Probe replacement accessory kit
AC power adapter
Probes
Probe
Description
THP0301-Y
THP0301-B
THP0301-M
THP0301-G
A621
(Yellow) 300 V, DC to 300 MHz, 10X high-voltage probe 2
(Blue) 300 V, DC to 300 MHz, 10X high-voltage probe 2
(Magenta) 300 V, DC to 300 MHz, 10X high-voltage probe 2
(Green) 300 V, DC to 300 MHz, 10X high-voltage probe 2
2000 A, 5 kHz to 50 kHz AC current probe/BNC
100 A, 100 kHz AC/DC current probe/BNC
200 MHz passive 100X high-voltage probe
500 MHz passive 50X high-voltage probe 3
2.5 A, 200 MHz AC current probe
A622
P5122
P5150
CT2
TCP303/TCPA300
TCP305/TCPA300
TCP312/TCPA300
TCP404XL/TCPA400
150 A, 15 MHz AC/DC current probe/amplifier
50 A, 50 MHz AC/DC current probe/amplifier
30 A, 100 MHz, AC/DC current probe/amplifier
500 A, 2 MHz AC/DC current probe/amplifier
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
2
3
One probe comes standard with the instrument.
The P5150 is fully compatible with THS oscilloscopes, but 50X vertical scaling is not offered.
www.tektronix.com 11
Datasheet
ASEAN / Australasia (65) 6356 3900
Belgium 00800 2255 4835*
Austria 00800 2255 4835*
Brazil +55 (11) 3759 7627
Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777
Canada 1 800 833 9200
Central East Europe and the Baltics +41 52 675 3777
Finland +41 52 675 3777
Central Europe & Greece +41 52 675 3777
France 00800 2255 4835*
Denmark +45 80 88 1401
Germany 00800 2255 4835*
Hong Kong 400 820 5835
India 000 800 650 1835
Italy 00800 2255 4835*
Japan 81 (3) 6714 3010
Luxembourg +41 52 675 3777
The Netherlands 00800 2255 4835*
Poland +41 52 675 3777
Russia & CIS +7 (495) 6647564
Sweden 00800 2255 4835*
Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90
Norway 800 16098
Portugal 80 08 12370
South Africa +41 52 675 3777
Switzerland 00800 2255 4835*
USA 1 800 833 9200
Middle East, Asia, and North Africa +41 52 675 3777
People's Republic of China 400 820 5835
Republic of Korea 001 800 8255 2835
Spain 00800 2255 4835*
Taiwan 886 (2) 2722 9622
United Kingdom & Ireland 00800 2255 4835*
* European toll-free number. If not accessible, call: +41 52 675 3777
Updated 10 April 2013
For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com.
©
Copyright Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price
change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
19 Apr 2013
3GW-27121-5
www.tektronix.com
相关型号:
©2020 ICPDF网 联系我们和版权申明