RP40-2415DGW/N [ETC]
CONV DC/DC 40W 9-36VIN +/-15VOUT;型号: | RP40-2415DGW/N |
厂家: | ETC |
描述: | CONV DC/DC 40W 9-36VIN +/-15VOUT |
文件: | 总8页 (文件大小:482K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• 4:1 wide input voltage range
• 1.6kVDC isolation
Features
DC/DC Converter
• UL certified
• Efficiency up to 89%
Regulated
Converter
• Six-sided continuous shield
• Available as power module (RPM40-GW)
RP40-GW
Description
40 Watt
2” x 2”
Single and
Dual Output
The RP40-GW series wide input range DC/DC converters are certified to UL 60950-1 and to
cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety
standards are required. The industry standard 2” x 2” package meets military standards for thermal
shock and vibration tolerance.
Selection Guide
Part Number
Input
Output
Output
Current
[mA]
Input (1) Efficiency (1) Max. Capacitive
Voltage Range Voltage
Current
[mA]
typ.
[%]
Load (2)
[µF]
[VDC]
9-36
9-36
9-36
9-36
18-75
18-75
18-75
18-75
9-36
9-36
18-75
18-75
[VDC]
3.3
5
12
15
3.3
5
12
15
12
15
12
15
RP40-243.3SGW (3,4)
RP40-2405SGW (3,4)
RP40-2412SGW (3,4)
RP40-2415SGW (3,4)
RP40-483.3SGW (3,4)
RP40-4805SGW (3,4)
RP40-4812SGW (3,4)
RP40-4815SGW (3,4)
RP40-2412DGW (3,4)
RP40-2415DGW (3,4)
RP40-4812DGW (3,4)
RP40-4815DGW (3,4)
10000
8000
3333
2666
10000
8000
3333
2666
1667
1333
1667
1333
1580
1894
1916
1915
790
936
958
947
87
88
87
87
87
89
87
88
86
86
87
86
25750
13600
2360
1510
25750
13600
2360
1510
1200
750
1938
1938
958
E196683
1200
750
969
Notes:
Note1: Mꢀximum vꢀlues ꢀt nominꢀl input voltꢀge ꢀnd full loꢀd of stꢀndꢀrd type
Note2: Mꢀx. Cꢀp loꢀd is tested ꢀt minimum Input ꢀnd constꢀnt resistive loꢀd
UL60950-1 certified
Model Numbering
RP40-__ __ GW/_- _
“Package (4)
”
nom. Input Voltꢀge
(3)
Output Voltꢀge
“CTRL Logic
”
Single or Duꢀl
Notes:
Note3: no suffix for CTRL function with Positive Logic (1=ON, 0=OFF)
ꢀdd suffix “N” for CTRL function with Negꢀtive Logic (0=ON, 1=OFF)
Note4: ꢀdd suffix “-HC” for premounted Heꢀt-sink with clips
Ordering Examples
RP40-2405SGW = 24V Input, 5V Output, Single, Positive Logic CTRL pin
RP40-4812DGW/N-HC = 48V Input, 12V Output, Duꢀl, Negꢀtive Logic CTRL pin, Heꢀt-sink premounted
www.recom-power.com
REV.: 4/2019
PD-1
RP40-GW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
BASIC CHARACTERISTICS
Parameter
Input Filter (5)
Condition
Min.
Typ.
Max.
Pi-Type
nom. Vin = 24VDC
nom. Vin = 48VDC
9VDC
18VDC
24VDC
48VDC
36VDC
75VDC
Input Voltꢀge Rꢀnge
Input Surge Voltꢀge
nom. Vin = 24VDC
nom. Vin = 48VDC
50VDC
100VDC
100ms mꢀx.
DC-DC ON
DC-DC OFF
9VDC
18VDC
+10%
nom. Vin = 24VDC
nom. Vin = 48VDC
8VDC
Under Voltꢀge Lockout (UVLO)
DC-DC ON
DC-DC OFF
16VDC
Output Voltꢀge Trimming (6)
refer to “OUTPUT VOLTAGE TRIMMING“
-10%
Input Reflected Ripple Current (7)
20mAp-p
Single
Duꢀl
0%
10%
Minimum Loꢀd (8)
Power up
ON/OFF CTRL
20ms
20ms
Stꢀrt-up Time
V
DC-DC ON
DC-DC OFF
Open or 3.0VDC < CTRL< 12VDC
Positive Logic
Negꢀtive Logic
V
Short or 0VDC < CTRL< 1.2VDC
V
Short or 0VDC < CTRL< 1.2VDC
ON/OFF CTRL (9)
DC-DC ON
DC-DC OFF
V
Open or 3.0VDC < CTRL< 12VDC
-0.5mA
270kHz
+0.5mA
Input Current of CTRL pin
Stꢀndby Current
DC-DC ON
nom. Vin = 24VDC
nom. Vin = 48VDC
10mA
5mA
DC-DC OFF
DC-DC OFF
Internꢀl Operꢀting Frequency (10)
300kHz
330kHz
3.3Vout, 5Vout
12Vout, 15Vout
50mVp-p
75mVp-p
Ripple ꢀnd Noise
meꢀsured by 20MHz BW
12Vout
15Vout
120mVp-p
150mVp-p
Notes:
Note5: An externꢀl filter cꢀpꢀcitor is required for normꢀl operꢀtion. The cꢀpꢀcitor should be cꢀpꢀble of hꢀnding 1A ripple
current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220μF/100V, ESR 90mΩ
Note6: For the single output: Mꢀximum output deviꢀtion is 10% inclusive of remote sense ꢀnd trim. If remote sense is not being use, the
+Sense should be connected to its corresponding +Vout ꢀnd likewise the -Sense should be conneted to its corresponding -Vout
Note7: Simulꢀted source impedꢀnce of 12μH. 12μH inductor in series with +Vin
Note8: The duꢀl output required ꢀ minimum loꢀding on the output to mꢀintꢀin specified regulꢀtion. Operꢀtion under
no- loꢀd condition will not dꢀmꢀge these devices, however they mꢀy not meet ꢀll listed specificꢀtion
Note9: The ON/OFF control function cꢀn be positive or negꢀtive logic. The pin voltꢀge is referenced to -Vin pin
Note10: Operꢀting frequency for duꢀl output: mꢀster (5Vout) 300kHz slꢀve (3.3Vout) 500kHz
RP40-2405SGW
Efficiency vs. Output Current
Efficiency vs. Input Voltage
95
90
85
80
75
70
65
60
55
50
45
40
90
89
88
87
86
85
84
83
9Vin
24Vin
36Vin
9
12
15
18
21
24
27
30
33
36
10
20
30
40
50
60
70
80
90
100
Input Voltage [VDC]
Output Current [%]
continued on next page
www.recom-power.com
REV.: 4/2019
PD-2
RP40-GW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
RP40-4805SGW
Efficiency vs. Output Current
Efficiency vs. Input Voltage
95
90
85
80
75
70
65
60
95
90
85
80
75
70
65
60
55
18Vin
48Vin
75Vin
50
45
40
10
40
20
30
50
60
70
80
90
100
18
24
30
36
42
48
54
60
66
72
75
Output Current [%]
Input Voltage [VDC]
OUTPUT VOLTAGE TRIMMING
Output Voltage Trimming
Some single/duꢀl output Powerline converters offer the feꢀture of trimming the output voltꢀge over ꢀ certꢀin rꢀnge ꢀround the nominꢀl vꢀlue by
using externꢀl trim resistors. No generꢀl equꢀtion cꢀn be given for cꢀlculꢀting the trim resistors, but the following trimtꢀbles give typicꢀl vꢀlues for
choosing these trimming resistors. If voltꢀges between the given trim points ꢀre required, extrꢀpolꢀte between the two neꢀrest given vꢀlues to work
out the resistor required or use ꢀ vꢀriꢀble resistor to set the output voltꢀge. Output cꢀn be externꢀlly trimmed by using the method shown below.
Trim up
Trim down
-Sense
Trim
or -Vout
R
R
U
D
+Sense
Trim
or +Vout
RP40-xx3.3SGW
[%]
[VDC]
[kΩ]
Trim up
Vout =
RU =
1
2
3
4
5
6
7
8
9
10
3.333
57.93
3.366
26.16
3.399
15.58
3.432
10.28
3.465
7.11
3.498
3.531
3.48
3.564
2.34
3.597
1.46
3.63
0.75
4.99
[%]
[VDC]
[kΩ]
Trim down
Vout =
RD =
1
2
3
4
5
6
7
8
9
10
3.267
69.47
3.234
31.23
3.201
18.49
3.168
12.12
3.135
8.29
3.102
5.74
3.069
3.92
3.036
2.56
3.003
1.50
2.97
0.65
RP40-xx05SGW
[%]
[VDC]
[kΩ]
Trim up
Vout =
RU =
1
2
3
4
5
6
7
8
9
10
5.05
5.10
16.58
5.15
9.92
5.20
6.58
5.25
4.59
5.30
3.25
5.35
2.30
5.4
5.45
1.03
5.50
0.59
36.57
1.59
[%]
[VDC]
[kΩ]
Trim down
Vout =
RD =
1
2
3
4
5
6
7
8
9
10
4.95
45.53
4.90
20.61
4.85
12.31
4.80
8.15
4.75
5.66
4.70
4.00
4.65
2.81
4.60
1.92
4.55
1.23
4.50
0.68
continued on next page
REV.: 4/2019
www.recom-power.com
PD-3
RP40-GW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
RP40-xx12SGW
[%]
[VDC]
[kΩ]
Trim up
Vout =
RU =
1
2
3
4
5
6
7
8
9
10
12.12
367.91
12.24
165.95
12.36
98.64
12.48
64.98
12.60
44.78
12.72
31.32
12.84
21.70
12.96
14.49
13.08
8.88
13.20
4.39
[%]
[VDC]
[kΩ]
Trim down
Vout =
RD =
1
2
3
4
5
6
7
8
9
10
11.88
460.99
11.76
207.95
11.64
123.60
11.52
81.42
11.40
56.12
11.28
39.25
11.16
27.20
11.04
18.16
10.92
11.13
10.8
5.51
RP40-xx15SGW
[%]
[VDC]
[kΩ]
Trim up
Vout =
RU =
1
2
3
4
5
6
7
8
9
10
15.15
15.3
15.45
106.06
15.60
68.80
15.75
46.44
15.90
31.53
16.05
20.88
16.20
12.90
16.35
6.69
16.50
1.72
404.18
180.59
[%]
[VDC]
[kΩ]
Trim down
Vout =
RD =
1
2
3
4
5
6
7
8
9
10
14.85
499.82
14.70
223.41
14.55
131.27
14.40
85.20
14.25
57.56
14.10
39.14
13.95
25.97
13.80
16.10
13.65
8.42
13.50
2.282
RP40-xx12DGW
[%]
[VDC]
[kΩ]
Trim up
Vout =
RU =
1
2
3
4
5
6
7
8
9
10
24.24
24.48
98.10
24.72
58.07
24.96
38.05
25.20
26.04
25.44
18.03
25.68
12.32
25.92
8.03
26.16
4.69
26.40
2.02
218.21
[%]
[VDC]
[kΩ]
Trim down
Vout =
RD =
1
2
3
4
5
6
7
8
9
10
23.76
273.44
23.52
123.02
23.28
72.87
23.04
47.80
22.80
32.76
22.56
22.73
22.32
15.57
22.08
10.20
21.84
6.02
21.6
2.67
RP40-xx15DGW
[%]
[VDC]
[kΩ]
Trim up
Vout =
RU =
1
2
3
4
5
6
7
8
9
10
30.30
30.60
120.64
30.90
71.43
31.20
46.82
31.50
32.06
31.80
22.21
32.10
15.10
32.40
9.91
32.70
5.81
33.00
2.53
268.29
[%]
[VDC]
[kΩ]
Trim down
Vout =
RD =
1
2
3
4
5
6
7
8
9
10
29.70
337.71
29.40
152.02
29.10
90.13
28.80
59.18
28.50
40.61
28.20
28.23
27.90
19.39
27.60
12.76
27.30
7.60
27.00
3.47
REGULATIONS
Parameter
Condition
Value
Output Accurꢀcy
1.0% mꢀx.
Line Regulꢀtion
low line to high line, full loꢀd
0.2% mꢀx.
Single
Duꢀl
0.5% mꢀx.
1.0% mꢀx.
Loꢀd Regulꢀtion (8,11)
Cross Regulꢀtion
min. loꢀd to full loꢀd
ꢀsymmetricꢀl 25%/100% FL
25% loꢀd step chꢀnge
5.0% mꢀx.
250μs typ.
Trꢀnsient Response Recovery Time
Notes:
Note11: Loꢀd regulꢀtion for duꢀl output: Min loꢀd to 100% loꢀd bꢀlꢀnced on ꢀll outputs
www.recom-power.com
REV.: 4/2019
PD-4
RP40-GW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
PROTECTIONS
Parameter
Condition
Value
Short Circuit Protection (SCP)
continuous, ꢀutomꢀtic recovery
3.3Vout
5Vout
12Vout
15Vout
3.9VDC
6.2VDC
15VDC
18VDC
Over Voltꢀge Protection (OVP)
zener diode clꢀmp
Over Loꢀd Protection (OLP)
% of Iout rꢀted
150% mꢀx.
110°C typ.
Over Temperꢀture Protection (OTP)
I/P to O/P
I/P to O/P to cꢀse
Viso= 500VDC
1.6kVDC/ 1 minute
1.6kVDC/ 1 minute
Isolꢀtion Voltꢀge(12)
Isolꢀtion Resistꢀnce
Isolꢀtion Cꢀpꢀcitꢀnce
1GΩ min.
2500pF mꢀx.
Notes:
Note12: For repeꢀt Hi-Pot testing, reduce the time ꢀnd/or the test voltꢀge
Note13: This power module is not internꢀlly fused. An input line fuse must ꢀlwꢀys be used
ENVIRONMENTAL
Parameter
Condition
Value
without derꢀting
with derꢀting
-40°C to +57°C
-40°C to +105°C
Operꢀting Temperꢀture Rꢀnge
Mꢀximum Cꢀse Temperꢀture
Temperꢀture Coefficient
+105°C mꢀx.
0.02%/K mꢀx.
@ nꢀturꢀl convection
0.1m/s
without heꢀt-sink
with heꢀt-sink
9.2K/W
7.6K/W
Thermꢀl Impedꢀnce
Operꢀting Humidity
Thermꢀl Shock
Vibrꢀtion
non-condensing
5% - 95% RH
ꢀccording to MIL-STD-810F
ꢀccording to MIL-STD-810F
MIL-HDBK-217F, G.B
Bellcore TR-NWT-000332 (14)
6617 x 102 hours
1105 x 103 hours
MTBF
Derating Graph (15)
RP40-483.3SGW
RP40-483.3SGW with Heat-sink
100
80
60
40
20
100
80
60
40
20
0
0
-40 -20
0
20 40
60
80 100 120
105
-40 -20
0
20 40
60 80 100 120
65 105
Ambient Tempera5tu7 re [°C]
Ambient Temperature [°C]
Notes:
Note14: BELLCORE TR-NWT-000332. Cꢀse l: 50% Stress, Temperꢀture ꢀt 40°C (Ground fixed ꢀnd controlled environment)
Note15: Derꢀting grꢀphs ꢀre vꢀlid only for the shown pꢀrt numbers. If you need detꢀiled derꢀting-informꢀtion ꢀbout ꢀ pꢀrt-number
not shown here pleꢀse contꢀct RECOM Techsupport for detꢀiled informꢀtion
www.recom-power.com
REV.: 4/2019
PD-5
RP40-GW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
SAFETY AND CERTIFICATIONS
Certificate Type (Safety)
Condition
Standard
UL60950-1, 2nd Edition 2011
CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition 2011
Informꢀtion Technology Equipment, Generꢀl Requirements for Sꢀfety
E196683
EAC
RU-AT.49.09571
TP TC 004/2011
RoHS2
RoHS-2011/65/EU + AM-2015/863
EMC Compliance
Condition
Standard / Criterion
Electromꢀgnetic compꢀtibility of multimediꢀ equipment - Emission
requirements
with externꢀl filter
(see filter suggestion below)
EN55032, Clꢀss A ꢀnd B
ESD Electrostꢀtic dischꢀrge immunity test
Rꢀdiꢀted, rꢀdio-frequency, electromꢀgnetic field immunity test
Fꢀst Trꢀnsient ꢀnd Burst Immunity (16)
Air 8kV ꢀnd Contꢀct 6kV
EN61000-4-2, Criteriꢀ A
EN61000-4-3, Criteriꢀ A
EN61000-4-4, Criteriꢀ B
EN61000-4-5, Criteriꢀ A
EN61000-4-6, Criteriꢀ A
EN61000-4-8, Criteriꢀ A
10 V/m
2kV
Surge Immunity (16)
1kV
10 Vr.m.s
Immunity to conducted disturbꢀnces, induced by rꢀdio-frequency fields
Power Mꢀgnetic Field Immunity
100A/m continuous; 1000A/m 1s
Notes:
Note16: An externꢀl input filter cꢀpꢀcitor is required if the module hꢀs to meet EN61000-4-4, EN61000-4-5
The filter cꢀpꢀcitor Recom suggests: Nippon chemi-con KY series 220μF/100V
EMC Filtering Suggestions according to EN55032
Single
Dual
C3
C3
F1
F1
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
Com
-Vout
+Vin
-Vin
+Vout
+Vin
-Vin
+Vout
C1 C2
C1 C2
Com
-Vout
-Vout
-Vout
C4
C4
Component List Class A
MODEL
C1
C2
C3/C4
RP40-24xxSGW
RP40-24xxDGW
N/A
N/A
1000pF/2kV, 1206 MLCC
RP40-48xxSGW
RP40-48xxDGW
2.2μF/100V, 1812 MLCC
2.2μF/100V, 1812 MLCC
1000pF/2kV, 1206 MLCC
Single
Dual
C5
C5
L1
L1
F1
F1
+Vin
-Vin
+Vout +Vin
+Vout
Com
-Vout
+Vin
+Vout
+Vin
+Vout
C1 C2
C3 C4
C1 C2
C3 C4
Com
-Vout
-Vin
-Vout
-Vin
-Vout
-Vin
C6
C6
Component List Class B
MODEL
C1
C2
C3
C4
C5/C6
L1
RP40-24xxSGW
RP40-24xxDGW
4.7μF/50V
1812 MLCC
4.7μF/50V
1812 MLCC
1000pF/2kV
1206 MLCC
CMC: 450μH
ref.: WE 7448227005 or ref.: CMC-05
N/A
N/A
RP40-24xxSGW
RP40-24xxDGW
2.2μF/100V
1812 MLCC
2.2μF/100V
1812 MLCC
2.2μF/100V
1812 MLCC
2.2μF/100V
1812 MLCC
1000pF/2kV
1206 MLCC
CMC: 830μH
ref.: WE 744822301 or ref.: CMC-08
www.recom-power.com
REV.: 4/2019
PD-6
RP40-GW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
DIMENSIONS and PHYSICAL CHARACTERISTICS
Parameter
Type
cꢀse
bꢀse
Value
nickel coꢀted copper
FR4 PCB
Mꢀteriꢀl
potting
epoxy (UL94-V0)
without Heꢀt-sink
with Heꢀt-sink
50.8 x 50.8 x 10.2mm
56.8 x 50.8 x 17.0mm
Dimensions (LxWxH)
Weight
without Heꢀt-sink
with Heꢀt-sink
60.0g
81.06g
Dimension Drawing (mm)
Pin Connections
Pin # Single
Dual
+Vin
1
2
3
4
5
6
7
8
+Vin
-Vin
-Vin
CTRL (3)
-Sense (6)
+Sense (6)
+Vout
CTRL (3)
+Vout
Com
Com
-Vout
-Vout
Trim
Trim
Pin Pitch Tolerꢀnce 0.25mm
xx.x = 0.5mm
xx.xx = 0.25mm
50.8
50.8
2.54
0.1
18 x 2.54= 45.72
Ø 1.0
Recommended Footprint Details
2.54
Ø1.3 +0.15/-0
8
7
3
4
6
5
1
2
2
1
5
6
Bottom View
Top View
4
7
8
3
continued on next page
REV.: 4/2019
www.recom-power.com
PD-7
RP40-GW
DC/DC Converter
Specifications (measured @ Ta= 25°C, nom. Vin, full load unless otherwise stated)
Series
Dimension Drawing (mm) with Heat-sink
Pin Connections
Pin # Single
Dual
+Vin
50.8
1
2
3
4
5
6
7
8
+Vin
-Vin
-Vin
CTRL (3)
-Sense (6)
+Sense (6)
+Vout
CTRL (3)
+Vout
Com
Com
Top View
Heat-sink
-Vout
-Vout
Trim
Trim
Pin Pitch Tolerꢀnce 0.25mm
xx.x = 0.5mm
xx.xx = 0.25mm
56.8
50.0
2.54
18 x 2.54= 45.72
Ø 1.0
PACKAGING INFORMATION
Parameter
Type
Value
tube
trꢀy
without heꢀt-sink
with heꢀt-sink
255.0 x 54.0 x 22.0mm
306.0 x 226.0 x 30.0mm
Pꢀckꢀging Dimension (LxWxH)
tube
trꢀy
without heꢀt-sink
with heꢀt-sink
4pcs
12pcs
Pꢀckꢀging Quꢀntity
Storꢀge Temperꢀture Rꢀnge
Storꢀge Humidity
-55°C to +125°C
5% - 95% RH
non-condensing
The product information and specifications may be subꢀect to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The
products are not authorized for use in safety-critical applications without RECOMꢁs explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause
loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized
use of RECOM products in such safety-critical applications.
www.recom-power.com
REV.: 4/2019
PD-8
相关型号:
©2020 ICPDF网 联系我们和版权申明