NSN2.00BK [ETC]
SLEEVING 2" X 200' BLACK;型号: | NSN2.00BK |
厂家: | ETC |
描述: | SLEEVING 2" X 200' BLACK |
文件: | 总2页 (文件大小:3360K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPECIALTY
Technical Data Sheet
Put-Ups
Manages And Protects
Cable Bundles
Expansion Range
Nominal
Size
Part
#
Bulk
Shop
Spool
Available
Colors
Lbs/
100’
Spool
Min
Max
Increased Safety In
Foot Traffic Areas
1/4”
3/8”
1/2”
5/8”
3/4”
1 1/4”
1 1/2”
2”
NSN0.25
NSN0.38
NSN0.50
NSN0.63
NSN0.75
NSN1.25
NSN1.50
NSN2.00
1/8”
3/16”
1/4”
3/8”
1/2”
3/4”
1”
7/16”
1/2”
3/4”
1”
1 1/4”
1 3/4”
2”
1,000’
500’
500’
500’
250’
200’
200’
200’
200’
125’
100’
75’
70’
50’
NY, BK, SS
NY, BK, SS
NY, BK, SS
NY, BK, SS
NY & BK
NY, BK, SS
NY, BK, SS
NY & BK
0.44
0.57
0.89
1.04
1.25
1.96
2.25
2.75
Economical And Easy
To Install
Expands Up To 150%
40’
50’
1 1/2”
3 1/2”
Cut And Abrasion
Resistant
Increased Friction On Smooth Surfaces
Minimizes Slipping And Accidents
Colors Available:
BK, NY, and SS
FLEXO NON-SKID (NS) is a unique combination
®
of our standard PET material braided together
with a matching thread of a high-friction polymer.
NS is engineered primarily for wire and cable
management in smooth floor, high traffic
environments such as broadcast studios
where someone might inadvertently step
on a cable snake and slip.
As long as there’s no excessive pressure
on cables protected with NS, the entire snake
glides easily and quietly along the floor.
When local pressure is applied, such as someone
stepping on the cable, the high friction material
comes in contact with the floor and reduces the
possibility of the cable sliding out from underfoot.
Cut Cleanly
Hot Knife
Material
Polyethylene Terepthalate
NS is substantially less “slippery”than our regular PET,
yet provides the same level of flexibility and protection
from cable wear and abrasion.
Grade
NSN
Non-Skid is ideal for smooth floor areas
such as photo, film and TV studios where
cable snakes, high foot traffic and low light
combine to create a slipping hazard.
Monofilament Diameter
.028”
Drawing Number
TF001NS-WD
Colors Available:
Neon Yellow (NY), Black (BK) and Safety Stripe (SS).
www.techflex.com
1 (833) SLEEVING • (973) 300-9242 • fax: (973) 300-9409
104 Demarest Road • Sparta, NJ 07871
SPECIALTY
Technical Data Sheet
ABRASION
Melt Point
ASTM D-2117
260°F (126°C)
Abrasion Resistance
Medium
Maximum Continuous
Mil-I-23053
Abrasion Test Machine
Taber 5150
175°F (79°C)
Minimum Continuous
Abrasion Test Wheel
Calibrase H-18
-40°F (-40°C)
CHEMICAL
RESISTANCE
Abrasion Test Load
500g
1=No Effect
4=More Affected
2=Little Effect 5=Severely Affected
3=Affected
PHYSICAL
Room Temperature
71°F
PROPERTIES
Humidity
53%
Aromatic Solvents ________________ 2
Aliphatic Solvents_________________ 1
Chlorinated Solvents ______________ 3
Weak Bases ______________________ 1
Salts____________________________ 1
Strong Bases _____________________ 2
Salt Water 0-S-1926________________ 1
Hydraulic Fluid MIL-H-5606 _________ 1
Lube Oil MIL-L-7808 _______________ 1
De-Icing Fluid MIL-A-8243 __________ 1
Strong Acids _____________________ 3
Strong Oxidants __________________ 2
Esters/Ketones ___________________ 1
UV Light ________________________ 1
Petroleum _______________________ 1
Fungus ASTM G-21 ________________ 1
Halogen Free ___________________ Yes
RoHS __________________________ Yes
Monofilament Diameter________ .028”
ASTM D-204
Recommended Cutting _____Hot Knife
Colors _________________________ 3
Wall Thickness_________________ .07”
Specific Gravity ASTM D-792 _____1.38
Braid (1 Carrier) Broken
In One Direction
350 Test Cycles
Material Destroyed -
Braid Broken In Both
Directions
650 Test Cycles
Moisture Absorption ___________.1-.2
% ASTM D-570
Pre-Test Weight
4,360.5 mg
Post-Test Weight
4,147.0 mg
Test End Loss Of Mass
Point Of Destruction
213.5 mg
© 2021 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden.
Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms
of sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
07-30
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.
相关型号:
©2020 ICPDF网 联系我们和版权申明