NSNB01-F2433 [ITF]
SAW Bandpass Filter F2433; SAW带通滤波器F2433型号: | NSNB01-F2433 |
厂家: | INTEGRATED TECHNOLOGY FUTURE |
描述: | SAW Bandpass Filter F2433 |
文件: | 总7页 (文件大小:231K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SAW Bandpass Filter F2433
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
RF bandpass filter
High attenuation
3dB bandwidth 260kHz
50ꢀ single-ended operation
Ceramic Surface Mounted Device (SMD) Package ( 3.0mm * 3.0 mm )
RoHS Compliant
Package Dimension – SMD 3.0 × 3.0
8
8
1
2
3
7
6
5
7
6
5
1
2
I
2433
4
3
4
Pin Configuration
Dimensions shown are nominal in millimeters
3
Input
Output
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
7
1, 2, 4, 5, 6, 8
Case ground
Maximum Ratings
Parameter
Unit
℃
Minimum
Typical
Maximum
Operating Temperature Range
Storage Temperature Range
-40
-45
-
25
25
0
85
85
-
℃
Power Handling Capability
dBm
Electrostatics Sensitive Device (ESD)
Part No.
Rev. Date
Rev.
NSNB01-F2433
2012-02-13
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
1/7
SAW Bandpass Filter F2433
Specifications
Fc = 243.95 MHz
Terminating source impedance : 50ꢀ
Terminating load impedance : 50ꢀ
Minimum
Typical
243.95
260
Maximum
Unit
MHz
kHz
dB
Center Frequency ( Fc )
3dB Band Width
-
-
-
-
-
Insertion Loss (At Fc)
3.5
4.5
Relative Attenuation
Fc +/- 0.6MHz
20
35
50
25
40
55
-
-
-
dB
Fc +/- 1.2MHz
Fc +/- 21.6MHz
Input/Output Impedance
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
Part No.
Rev. Date
Rev.
NSNB01-F2433
2012-02-13
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
2/7
SAW Bandpass Filter F2433
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
C1,C2 = 4.0 pF
L1,L2 = 68 nH
Marking Configuration
1)
I2)
24333)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
Part No.
Rev. Date
Rev.
NSNB01-F2433
2012-02-13
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
3/7
SAW Bandpass Filter F2433
Typical Performance ( at 25℃ )
Part No.
Rev. Date
Rev.
NSNB01-F2433
2012-02-13
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
4/7
SAW Bandpass Filter F2433
Input / Output VSWR Charts
Input / Output Smith Charts
Part No.
Rev. Date
Rev.
NSNB01-F2433
2012-02-13
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
5/7
SAW Bandpass Filter F2433
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
0~15 degree
Carrier tape
Part No.
Rev. Date
Rev.
NSNB01-F2433
2012-02-13
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
6/7
SAW Bandpass Filter F2433
Carrier Tape Dimensions [unit : mm]
A
B
C
D
E
F
3.40 ± 0.1
3.40 ± 0.1
7.25 ± 0.1
1.70 ± 0.1
12.00 ± 0.1
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
Part No.
Rev. Date
Rev.
NSNB01-F2433
2012-02-13
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
AS 01
7/7
相关型号:
©2020 ICPDF网 联系我们和版权申明