BB-EIRP410-2SFP-T [ETC]
GIGABIT POE (8) 10/100, (2) SFP;![BB-EIRP410-2SFP-T](http://pdffile.icpdf.com/pdf2/p00319/img/icpdf/BB-EIRP410-2_1916267_icpdf.jpg)
型号: | BB-EIRP410-2SFP-T |
厂家: | ![]() |
描述: | GIGABIT POE (8) 10/100, (2) SFP 局域网(LAN)标准 |
文件: | 总2页 (文件大小:152K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
10 Port Industrial ethꢀrnꢀt ꢁwitch
with 2 ꢂJ-45/ꢁFP ꢃombo Ports
for giꢄabit ethꢀrnꢀt
EIRP410-2SFP-T
Pꢂꢅꢆꢇꢃꢈ FeAꢈꢇꢂeꢁ
•ꢀ Eightꢀ10/100ꢀBaseTꢀ802.3afꢀEndꢀPointꢀPoEꢀPortsꢀ
•ꢀ TwoꢀRJ-45/SFPꢀ100/1000ꢀComboꢀSlotsꢀforꢀGigabitꢀEthernet
•ꢀ UL,ꢀcULꢀCE/ENꢀ60950
•ꢀ WideꢀOperatingꢀTemperatureꢀ(-40ꢀtoꢀ75C)
•ꢀ DINꢀRailꢀorꢀPanelꢀMount
ꢅꢂꢆeꢂIꢉg IꢉFꢅꢂꢊAꢈIꢅꢉ
The EIRP410-2SFEthernet Switch.
In addition to 8 PoE copper RJ-45 ports, it has 2 RJ-45/SFP Combo ports
to accommodate Gigabit Ethernet.
Mꢆꢃꢇꢈ ꢉꢊMBꢇꢋ
ꢃꢇsꢌꢋꢄPꢁꢄꢆꢉ
Industrial Gigabit Switch (8 PoE, 2 CU/SFP)
Power Over Ethernet Sourcing
EIRP410-2SFP-T
small Form-factor Pluggable (sFP) Port: The SFP Ports provide flexibility
when planning a network. Modules are available in multiple fiber formats.
If an SFP module is not inserted, the associated combo port can be used
with standard RJ-45 copper.
AꢃꢃeꢁꢁꢅꢂIeꢁ
SDR-240-48 - DIN-Rail Power Supply, 10A, 240W, 48V
C5UMB3FBL - 3 ft. (1 M)- Blue - Category 5e UTP Patch Cord
DFMM-LCLC-1M - Multi-Mode Duplex Fiber Cable, LC To LC, 1 Meter
DFSM-LCLC-1M - Single-Mode Duplex Fiber Cable, LC To LC, 1 Meter
SFP-1000SX-M-550M-T - SFP Module, 1000Base-SX, Multi-mode 550m, LC
Connector (-40 to 85°C)
SFP-100FX-M-2KM-T - SFP Module, 100Base-FX, Multi-mode 2km, LC Connector
(-40 to 85°C)
SFP-1000LX-S-10KM-T - SFP Module, 1000Base-LX, Single-mode 10km, LC
Connector (-40 to 85°C)
higꢀ-speed ꢁranꢂmiꢂꢂionꢂ: The switch includes a switch controller that
automatically senses transmission speed (10/100/1000 Mbps). The RJ-45
interface also auto-detects MDI or MDI-X, eliminating the requirement for
a crossover cable. Each port is buffered and supports store-and-forward
protocol.
ꢃual Power ꢄnput: To reduce the risk of power failure, the switch has two
48 VDC power inputs. If the power fails, the switch will automatically use
the secondary power input. Also, if the power goes out the corresponding
P1 or P2 LED will go out and the Fault LED will light. The contacts for the
alarm output will also open.
SFP-1000LX-S-20KM-T - SFP Module, 1000Base-LX, Single-mode 20km, LC
Connector (-40 to 85°C)
SFP-100FX-S-30KM-T - SFP Module, 100Base-FX, Single-mode 30km, LC
Connector (-40 to 85°C)
Flexible Mounting: IP30 metal enclosure - DIN or Panel mounted.
Power Over Ethernet (PoE); The eight 10/100 ports are classified as power
sourcing equipment (PSE) . These ports can be used to power IEEE 802.3af
compliant powered devices (PD), eliminating the need for a separate
power supply for each device. (15.4W per port)
ꢅide ꢆperating ꢁemperature: With an operating temperature of -40
to 75°C (-40 to 167°F), this switch is suitable for use in harsh industrial
environments.
ꢇaꢂy ꢁroubleꢂꢀooting: There are two LED indicators for each port that
display the link status and transmission speed. Three LED indicators for
power (P1, P2 and Fault) show power status. FWD LEDs on each PoE port
indicate when a powered device is connected. These indicators allow
you to quickly diagnose and correct problems and ensure your network
remains reliable.
www.bb-elec.com |
EIRP410-2SFP-T_3713ds
10 Port Industrial ethꢀrnꢀt ꢁwitch
with 2 ꢂJ-45/ꢁFP ꢃombo Ports
for giꢄabit ethꢀrnꢀt
EIRP410-2SFP-T
ꢁPeꢃIFIꢃAꢈIꢅꢉꢁ
ꢋꢇꢍꢊꢈꢎꢁꢆꢋꢏ
Pꢆꢇ
Safety
UL, cUL CE/EN60950-1
Ports
1 through 8
FCC Class A
802.3af End Point Alternative A
Standard
CE EN61000-6-2
Power Source Equipment (PSE)
CE EN61000-6-4
Capacity
Pin Assignment
Pꢆꢅꢇꢋ
15.4W per port
1 & 2 – VCC(+), 3 & 6 – VCC(-)
CE EN61000-4-2 (ESD)
CE EN61000-4-3 (RS)
CE EN61000-4-4 (EFT)
CE EN61000-4-5 (Surge)
CE EN61000-4-6 (CS)
CE EN61000-4-8 (Magnetic Field)
EMC
Dual 48 VDC Inputs
Reverse Polarity Protection
Removable Terminal Block
12 to 24 AWG
9.6 Watts (Without PoE Load)
140 Watts (Full PoE Load)
Input Voltage
Power Connection
Wire Size
Free Fall
Shock
Vibration
IEC60068-2-32
IEC60068-2-27
IEC60068-2-6
Power Use
Fault Output
ꢇꢉVꢄꢋꢆꢉMꢇꢉꢁꢎꢈ
Operating Temperature - 40 to 75°C (-40 to 167°F)
Storage Temperature
Operating Humidity
Mꢇꢌhꢎꢉꢄꢌꢎꢈ
Enclosure
1 Relay Output – Normally Closed
ꢄꢇꢇꢇ sꢁꢎꢉꢃꢎꢋꢃs
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE802.3af
802.3. 10Base-T Ethernet
100Base-TX and 100Base-FX Fast Ethernet
1000Base-T
Gigabit Fiber
Flow Control and Back Pressure
Power over Ethernet
- 40 to 85°C (-40 to 185°F)
0 to 95%
IP30 Metal Enclosure
Mounting
35mm DIN Rail or Panel Mount Attachments
(72mm (W) x 105mm (D) x 152mm (H)
2.84 x 4.13 x 5.98 inch
ꢉꢇꢁꢅꢆꢋk sPꢇꢌꢄFꢄꢌꢎꢁꢄꢆꢉs
Back-plane (Switching Fabric): 5.6Gbps
Throughput (Full-dux): 8.3Mpps@64bytes
14,880 pps Ethernet Port
Dimensions
Architecture
Transfer Rate
148,800 pps Fast Ethernet Port
1,488,000 pps Gigibit Fiber Ethernet
Buffer
1 MB
MAC Table
8K
Broadcast Storm Filtering
CSMA/CD
Misc
ꢄꢉꢁꢇꢋFꢎꢌꢇ
RJ-45 Ports
CU/SFP
8 x 10/100BaseT, 2 x10/100/1000,
Auto MDI/MDI-X
2 x Mini-GBIC SFP Combo Ports
Per unit: Power (Green), Power 1 (Green), Power 2
(Green), Fault (Red),
LED
8 port 10/100: Link/Activity (Green), Full duplex/
Collision (Amber), Power Feeding (Green)
Gigabit port: Link/Activity
orders@bb-elec.com
support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
相关型号:
©2020 ICPDF网 联系我们和版权申明