42012H [ETC]
PSU 12V 5A DIN RAIL ; 电源12V 5A DIN导轨\n型号: | 42012H |
厂家: | ETC |
描述: | PSU 12V 5A DIN RAIL
|
文件: | 总16页 (文件大小:516K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OPEN FRAME AND
DIN RAIL MOUNTING
AC/DC POWER
SUPPLY UNITS
ELECTRONICS LTD
Contents
1
32000 Series Open Frame AC/DC Linear Power Supplies ..............................................A1
33000 Series AC/DC Unregulated Linear Power Supplies ..............................................A7
2
3
41000 Series DIN Rail Mounting Power Supplies for
Instrumentation Applications..........................................................................................A8
4
5
6
7
42000 Series DIN Rail Mounting Linear Power Supplies................................................A9
42000 H&J Series DIN Rail Mounting Switch Mode Power Supplies ..........................A10
NEW 44000 Series DIN Rail Mounting Switch Mode Power Supplies ........................A11
Custom AC/DC Power Supplies......................................................................................A12
Calex 32000 Series
1
Open Frame AC/DC Linear Power Supplies
These high quality linear regulated power
supplies provide outstanding value and are
designed for ease of application and long
trouble free life.
◆
◆
◆
◆
◆
◆
◆
Universal AC input 100 - 240VAC
3.75kV Isolation safety transformer
TÜV approved
Quality UK design and manufacture
International industry standard sizes
Overload protection on all units
Exceeds the requirements of UL, CSA,
VDE, IEC, BT, ECMA & CEE
Safety earth tag
◆
◆
2 year warranty
TEMPERATURE DERATING CURVE
SPECIFICATION
A.C. Input
100/120/220/240VAC +10%, -12%,
47 to 440Hz
D.C. Output
See Voltage/Current Rating Chart.
Adjustment range ±5% minimum.
Line Regulation
±0.05% for a 10% line change.
Load Regulation
±0.05% for a 50% load change.
Output Ripple
Temperature Coefficient
±0.03%/°C maximum
2V to 15V units: 5.0mV PK-PK maximum
20V to 28V units: 0.02% PK-PK maximum
Transient Response
Efficiency (typical)
5V unit: 45%; 12V and 15V units: 55%;
24V units: 60%
50µseconds for a 50% load change
Short Circuit and Overload Protection
Automatic current limit/foldback
Overvoltage Protection
Built-in on all 5V outputs. Set at 6.2V ±0.4V
Other models use optional overvoltage
protection. See Option 4 overleaf
Remote Sensing
Vibration
Per MIL-STD-810C, Method 514, Procedure X
Shock
Per MIL-STD-810C, Method 516, Procedure V
Isolation
Input to ground: 3750VAC min.
Input to output(s): 3750VAC min.
Output to ground: 500VAC min.
Leakage current (live to ground): 5µA max.
Safety
Provided on most models, open sense load
protection built in.
Stability
In accordance with EN60950
±0.3% for 24 hour period after 1 hour warm-
up
Temperature Rating
Standard Range: 0°C to +50°C full-rated,
derated linearly to 40% at 70°C
Extended Range: -40°C to +50°C full-rated,
derated linearly to 40% at 70°C
A1
SINGLE OUTPUT MODELS
Output Output
DUAL OUTPUT MODELS
Output 1
Output 2
Current Voltage Current
1
Model
Voltage Current Case
Model
Voltage
Volts
5
Case
Volts
5
5
5
5
Amps
3.0
6.0
Amps
1.5
Volt
-5
Amps
1.5
32005A
32005B
32005C
32005D
32005E
32012A
32012B
32012C
32012D
32012E
32024A
32024B
32024C
32024D
32024E
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
32205A*
AA
AA
32212A 12 to 15
1.0
-12 to -15
or -5
1.0
0.4
9.0
12.0
18.0
1.7
3.4
5.1
6.8
10.2
1.2
2.4
3.6
32212B 12 to 15
1.7
-12 to -15
or -5
1.7
0.4
BB
5
12 to 15
12 to 15
12 to 15
12 to 15
12 to 15
24 to 28
24 to 28
24 to 28
24 to 28
24 to 28
32212C 12 to 15
32212D 12 to 15
3.4
5.0
-12 to -15
-12 to -15
3.4
5.0
CC
E
TRIPLE OUTPUT MODELS
Output 1
Output 2
Output 3
Model Voltage Current Voltage Current Voltage Current Case
Volts
32305A 5*
Amps
2.0
Volts
Amps
Volts
Amps
4.8
7.2
9 to 15*
0.4 -9 to -15* 0.4
or -5
AA
32024E/10 24 to 28
10.0
0.5
1.0
E
32305B
32305C
32305D
32305E
32305F
32305G
5
5
5
5
5
5
3.0
12 to 15
1.0 -12 to -15 1.0 AAA
or -5 0.4
6.0 12 to 15* 1.0 -12 to -15* 1.0
or -5 0.4
1.7 -12 to -15 1.7
or -5 0.7
1.7 -12 to -15 1.7
or -5 0.7
1.7 -12 to -15 1.7 DBB
or -5 0.7
32048A*
32048B*
32048D*
48
48
48
A
B
D
A
D
3.0
32150A 120 to 200 0.150**
6.0
8.0
12 to 15
12 to 15
BBB
BBB
* No remote sensing
12.0 12 to 15
12.0 12 to 15
** Output current from 180 to 200V falls
linearly from 150mA to 125mA
3.4 -12 to -15 3.4 DCC
OVP Selection Chart
Case
OPTIONS
1 Tropicalisation – suffix code ‘T’
OVP Model Required
2 Wide range output voltage adjustment – suffix
code ‘R’ available on 12V and higher output
voltages enabling adjustment down to 2V
(derate linearly from full load to zero at 2V)
3 Low temperature operation -40°C to +50°C –
suffix code ‘LT’
4 Overvoltage Protection Modules – These
optional Overvoltage Protection Modules are
available for use with any power supply NOT
supplied with built-in OVP. Each is adjustable
from 6.4V to 34V and should be used when
maximum load protection is of prime
Single
Output
Dual
A/B/C/D 32901A
E
32901B
AA/BB/CC 32901A,
protects both outputs
32901B,
protects both outputs
Triple AA/AAA/D 32901A,
Output
E
Output
protects dual outputs
BBB/131 OVP built-in on 5V outputs
C/131/AAA 32901A, protects any output
Disk
Drive
BB
not supplied with built-in
OVP
importance. Response time is 1mS. Mounting
holes are provided on the chassis for these
modules, which mount within the specified
outline dimensions of each power supply.
A2
GENERAL DIMENSIONS
All dimensions are in mm
1
A Case
B Case
Weight: 0.9kg
Weight: 1.8kg
Mounting holes 4.77mm diameter
Fuse at: 0.5/0.25 Amps for 100-120/220-240 VAC
Mounting holes 4.77mm diameter
Fuse at: 1.0/0.5 Amps for 100-120/220-240 VAC
C Case
D Case
Weight: 2.7kg
Weight: 3.4kg
Mounting holes 4.77mm diameter
Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC
Mounting holes 4.77mm diameter
Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC
A3
E Case
AA Case
Weight: 4.5kg
Weight: 0.9kg
1
Mounting holes 4.77mm diameter
Fuse at: 3.0/1.5 Amps for 100-120/220-240 VAC
Mounting holes 4.77mm diameter
Fuse at: 0.5/0.25 Amps for 100-120/220-240 VAC
BB Case
CC Case
Weight: 1.8kg
Weight: 3.2kg
Mounting holes 4.77mm diameter
Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC
Mounting holes 4.77mm diameter
Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC
A4
AAA Case
BBB Case
Weight: 2.3kg
Weight: 3.6kg
1
Mounting holes 4.77mm diameter
Fuse at: 1.0/0.5 Amps for 100-120/220-240 VAC
Mounting holes 4.77mm diameter
Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC
DBB Case
DCC Case
Weight: 5.0kg
Weight: 5.5kg
Mounting holes 4.77mm diameter
Mounting holes 4.77mm diameter
Fuse at: 3.0/1.5 Amps for 100-120/220-240 VAC
Overvoltage Protection Modules
OVP–12
32901A
OVP–24
32901B
A5
A Cover
B Cover
1
124
143
C Cover
D Cover
225.5
175
E Cover
350
A6
Calex 33000 Series
2
AC/DC Unregulated Linear Power Supplies
These high quality unregulated linear
power supplies are suitable for a wide
range of applications where fully
regulated DC source is not required.
a
◆
◆
Low cost
Suitable for many industrial
applications e.g. relays, solenoids,
DC motors etc.
◆
◆
◆
Universal input
3.75kV isolation safety transformer
Quality UK design and manufacture
SPECIFICATION
Input
115/230VAC 50/60Hz
D.C. Output
See Model Chart
Load Regulation
20% or 3V whichever is the greater for 20
to 100% load change
Output Ripple & Noise
1.5Vrms maximum
Output
Voltage
Volts
12
12
24
24
24
48
Output
Current
Model
Amps
10
20
5
10
20
5
33012A
33012B
33024A
33024B
33024C
33048B
Operating Temperature
0°C to +50°C
Isolation
Input to ground: 3750VAC min.
Input to output: 3750VAC min.
Output to ground: 500VAC min.
Safety
In accordance with EN60950 (Construction
uses safety bobbin approved to VDE 0551)
Overall Dimensions
l x w x h: 177.8 x 123.7 x <86.0mm
A7
Calex 41000 Series
3
DIN Rail Mounting Power Supplies for Instrumentation Applications
The 41000 Series range of power supplies
are designed for quick and trouble-free
installation onto 35mm profile DIN rails.
With outputs ranging from 5V to 24V and
maximum current capabilities from 100mA
to 500mA, these units are ideal for most
instrumentation and control systems.
Every model in the range is provided with
output current foldback limiting and is fully
short-circuit protected. Great attention has
been taken to usability and safety. A green
“supply on” LED is provided to clearly indicate
the presence of power, and link selection
allows the use of 110 or 230V supplies
without derating.
SPECIFICATION
Output
Voltage
Volts
5
5
12
12
12
15
15
Output
Current
mA
200
500
100
200
400
100
300
100
200
500
Input
Model
115VAC or 230VAC (±10%) link selectable
DC Output
See model chart
Ripple & Noise
less than 5mV rms.
Output Voltage Tolerance
±0.5% max.
Load Regulation
±0.2% for 50% load change
Line Regulation
±0.05% for 10% line change
Isolation: Input to output
3750VAC min.
41052
41055
41121
41122
41124
41151
41153
41241
41242
41245
24
24
24
Temperature Rating
Standard Range: 0°C to +50°C full-rated,
derated linearly to 40% at 70°C
Safety
In accordance with EN60950;
IEC950; UL1950; and CSA 22.2
Transformer
VDE 0551
Case Size
(l x w x h) 119.2 x 45 x 73.2mm
The case is rated to IP20
Case Material
Polycarbonate (self extinguishing to UL 94V-0)
A8
Calex 42000 Series
4
DIN Rail Mounting Linear Power Supplies
The 42000 Series DIN rail mounting power
supplies are supplied ready for connec-
tion. The unit has only to be snapped on
to the 35mm profile rail (DIN 46277-3) and
connected to the clearly marked terminal
screws. A status LED indicates power OK.
For increased power two or more units
may be connected in parallel. The output
of these units is fully protected against
short circuits and overload
SPECIFICATION
Input
110/220VAC 50/60Hz
DC Output
See model chart
Ripple & Noise
<5mV rms
Output Voltage Tolerance
±0.5% max.
Output
Voltage
Volts
12
12
15
15
24
24
24
Output
Current
Amps
1.0
2.0
1.0
2.0
1.0
2.0
4.0
Model
Case
42012A
42012A/2
42015A
42015A/2
42024A
A
A
A
A
A
A
B
42024A/2
42024B
Load Regulation
±0.2% for 50% load change
Line Regulation
±0.05% for 10% line change
Isolation: Input to output
3750Vac min.
Temperature Rating
Standard Range: 0°C to +50°C full-rated,
derated linearly to 40% at 70°C
Safety
In accordance with EN60950,
IEC 950, UL 1950 and CSA22.2
Transformer
VDE 0551
Case Size
‘A’ l x w x h 100 x 70 x 112mm
‘B’ l x w x h 150 x 72 x 112mm
The case is rated to IP20
Case Material
Polycarbonate (self extinguishing to UL 94V-0)
A9
Calex 42000 H & J Series
5
DIN Rail Mounting Switch Mode Power Supplies – 60 and 120 Watt
A range of high grade, low noise, regulated
switch mode power supplies designed to fit
standard 35mm DIN rail to BS5584:1978
(EN50 022, DIN 46277-3).
Front facing, clearly identified screw terminals
provide easy access for connection. Input of
either 110 or 230VAC can be used and the
range has a choice of output voltage and
current combinations. The DC output is fully
protected for short circuit and overload
conditions using pulse by pulse current
limiting.
◆
◆
◆
Inbuilt EMI filter, meets VDE curve B
Status LED indicates power OK
Compliant with relevant EU directives
Operating Temp
0 - 50°C (Derate linearly to 40%
of rated output at 70°C)
Dimensions (h x w x l)
SPECIFICATION
Input Voltage
93 - 132 & 187 - 264VAC
Frequency
73 x 100 x 118mm
47 - 63Hz
Case Material
DC Output
Polycarbonate (self extinguishing to UL 94V-0)
See model chart
Output Hold-up
20mS typ. at nominal line, full load
Output Voltage Tolerance
±0.5% max.
Output
Voltage
Volts
12
Output
Current
Amps
5
Model
Efficiency
42012H
42024H
42012J
42024J
>80% typ.
Load Regulation
1%
Line Regulation
±0.05% for 10% line change
Output Ripple
24
2.5
12
10
24
5
<50mV p-p
Short Circuit Protection
Electronic
Isolation
SELV to EN60 950
RFI
Class B
Safety
In accordance with EN60950; IEC950;
UL1950; and CSA 22.2
A10
Calex 44000 Series
6
DIN Rail Mounting Switch Mode Power Supplies – 240 and 480 Watt
A range of switch mode power supplies engineered
for ease of installation, efficient operation and
long term reliability.
The enclosure is a two part metal design. The
base consists of a robust but light weight aluminium
extrusion which combines rigidity and strength
with good thermal conductivity and forms the
DIN-rail mounting channel. The cover is made of
folded sheet steel and is ventilated to assist
thermal convection. Overall the enclosure also
provides exceptional RFI protection. The terminals
are heavy duty screw clamp connectors capable
of supporting identification markers.
◆
Pulse-by-pulse overcurrent/short circuit
protection
◆
◆
Green LED to indicate power output OK
Ease of installation onto type T35 DIN-rail
Operating Temp
0 - 50°C (Derate linearly to 40%
SPECIFICATION
Input Voltage
of rated output at 70°C)
Dimensions (h x w x l)
107 x 167 x 107mm
Terminal Size
93 - 132 & 187 - 264VAC
Frequency
47 - 63Hz
DC Output
See model chart
Output Hold-up
20mS typ. at nominal line, full load
Output Voltage Tolerance
±0.5% max.
10mm2 max cable
Output
Output
Current
Amps
10
Model
Voltage
Volts
24
Efficiency
44024K
44024L
>85% typ.
Load Regulation
1%
24
10
Line Regulation
±0.05% for 10% line change
Output Ripple
<50mV p-p
Short Circuit Protection
Electronic
Isolation
SELV to EN60 950
RFI
Class B
Safety
In accordance with EN60950; IEC950;
UL1950; and CSA 22.2
A11
Calex Custom Power Supplies
7
Our flexible approach to manufacturing
and wide product range often enables us to
provide solutions which meet our customers’
specific power supply needs. If you have a
requirement which cannot be met by one of
our standard units do call us. Our team of
highly qualified and experienced engineers
will always be happy to discuss your
application with you and will try to put
forward a proposal that meets your budget.
The list below describes just some of the
custom power supplies we have developed
in the past.
4. Open frame linear power supply for
industrial application. 230 or 415VAC
input; 24VDC output.
1. 150W power supply in 1U high, 19” chassis.
Built for the telecommunications
industry. 230VAC input; 48VDC output.
5. 750W unit in 3U high, 19” chassis, to
power medical equipment. 230VAC
input; 48VDC output.
2. 120W power supply built to withstand
severe vibration. Military application.
115VAC, 60Hz input; 5, 8 and +/-12VDC
outputs.
6. Standby power supply for battery
powered instrument. 230VAC input;
1.5VDC output.
7. DIN rail mounted unit to energise strain
gauge bridge. 115/230VAC input;
+/-10VDC outputs.
3. Miniature encapsulated unit for the
automotive industry. Operates at
ambient temperatures as low as
-40°C.12VDC input; 7.2VDC, 600mA output.
A12
Other great power conversion products
available from Calex Electronics:
Eurocard AC/DC Switch
Mode Power Supplies and
DC/DC Converters
Modular AC/DC Switch
Mode Power Supplies and
DC/DC Converters
Encapsulated AC/DC Switch
Mode Power Supplies and
DC/DC Converters
ELECTRONICS LTD
PO Box 2
Distributed by:
Leighton Buzzard
Bedfordshire
England
LU7 8WZ
Tel: +44 (0)1525 373178
Fax: +44 (0)1525 851319
E-mail: calex@btinternet.com
Online: http://www.calex.co.uk
相关型号:
©2020 ICPDF网 联系我们和版权申明