42012J_技术文档

OPEN FRAME AND

DIN RAIL MOUNTING

AC/DC POWER

SUPPLY UNITS

ELECTRONICS LTD

Contents

1

32000 Series Open Frame AC/DC Linear Power Supplies ..............................................A1

33000 Series AC/DC Unregulated Linear Power Supplies ..............................................A7

2

3

41000 Series DIN Rail Mounting Power Supplies for

Instrumentation Applications..........................................................................................A8

4

5

6

7

42000 Series DIN Rail Mounting Linear Power Supplies................................................A9

42000 H&J Series DIN Rail Mounting Switch Mode Power Supplies ..........................A10

NEW 44000 Series DIN Rail Mounting Switch Mode Power Supplies ........................A11

Custom AC/DC Power Supplies......................................................................................A12

Calex 32000 Series

1

Open Frame AC/DC Linear Power Supplies

These high quality linear regulated power

supplies provide outstanding value and are

designed for ease of application and long

trouble free life.

◆

Universal AC input 100 - 240VAC

3.75kV Isolation safety transformer

TÜV approved

Quality UK design and manufacture

International industry standard sizes

Overload protection on all units

Exceeds the requirements of UL, CSA,

VDE, IEC, BT, ECMA & CEE

Safety earth tag

◆

2 year warranty

TEMPERATURE DERATING CURVE

SPECIFICATION

A.C. Input

100/120/220/240VAC +10%, -12%,

47 to 440Hz

D.C. Output

See Voltage/Current Rating Chart.

Adjustment range ±5% minimum.

Line Regulation

±0.05% for a 10% line change.

Load Regulation

±0.05% for a 50% load change.

Output Ripple

Temperature Coefficient

±0.03%/°C maximum

2V to 15V units: 5.0mV PK-PK maximum

20V to 28V units: 0.02% PK-PK maximum

Transient Response

Efficiency (typical)

5V unit: 45%; 12V and 15V units: 55%;

24V units: 60%

50µseconds for a 50% load change

Short Circuit and Overload Protection

Automatic current limit/foldback

Overvoltage Protection

Built-in on all 5V outputs. Set at 6.2V ±0.4V

Other models use optional overvoltage

protection. See Option 4 overleaf

Remote Sensing

Vibration

Per MIL-STD-810C, Method 514, Procedure X

Shock

Per MIL-STD-810C, Method 516, Procedure V

Isolation

Input to ground: 3750VAC min.

Input to output(s): 3750VAC min.

Output to ground: 500VAC min.

Leakage current (live to ground): 5µA max.

Safety

Provided on most models, open sense load

protection built in.

Stability

In accordance with EN60950

±0.3% for 24 hour period after 1 hour warm-

up

Temperature Rating

Standard Range: 0°C to +50°C full-rated,

derated linearly to 40% at 70°C

Extended Range: -40°C to +50°C full-rated,

derated linearly to 40% at 70°C

A1

SINGLE OUTPUT MODELS

Output Output

DUAL OUTPUT MODELS

Output 1

Output 2

Current Voltage Current

1

Model

Voltage Current Case

Model

Voltage

Volts

5

Case

Volts

5

Amps

3.0

6.0

Amps

1.5

Volt

-5

Amps

1.5

32005A

32005B

32005C

32005D

32005E

32012A

32012B

32012C

32012D

32012E

32024A

32024B

32024C

32024D

32024E

A

B

C

D

E

A

B

C

D

E

A

B

C

D

E

32205A*

AA

32212A 12 to 15

1.0

-12 to -15

or -5

1.0

0.4

9.0

12.0

18.0

1.7

3.4

5.1

6.8

10.2

1.2

2.4

3.6

32212B 12 to 15

1.7

-12 to -15

or -5

1.7

0.4

BB

5

12 to 15

24 to 28

32212C 12 to 15

32212D 12 to 15

3.4

5.0

-12 to -15

3.4

5.0

CC

E

TRIPLE OUTPUT MODELS

Output 1

Output 2

Output 3

Model Voltage Current Voltage Current Voltage Current Case

Volts

32305A 5*

Amps

2.0

Volts

Amps

Volts

Amps

4.8

7.2

9 to 15*

0.4 -9 to -15* 0.4

or -5

AA

32024E/10 24 to 28

10.0

0.5

1.0

E

32305B

32305C

32305D

32305E

32305F

32305G

5

3.0

12 to 15

1.0 -12 to -15 1.0 AAA

or -5 0.4

6.0 12 to 15* 1.0 -12 to -15* 1.0

or -5 0.4

1.7 -12 to -15 1.7

or -5 0.7

1.7 -12 to -15 1.7

or -5 0.7

1.7 -12 to -15 1.7 DBB

or -5 0.7

32048A*

32048B*

32048D*

48

A

B

D

A

D

3.0

32150A 120 to 200 0.150**

6.0

8.0

12 to 15

BBB

* No remote sensing

12.0 12 to 15

** Output current from 180 to 200V falls

linearly from 150mA to 125mA

3.4 -12 to -15 3.4 DCC

OVP Selection Chart

Case

OPTIONS

1 Tropicalisation – suffix code ‘T’

OVP Model Required

2 Wide range output voltage adjustment – suffix

code ‘R’ available on 12V and higher output

voltages enabling adjustment down to 2V

(derate linearly from full load to zero at 2V)

3 Low temperature operation -40°C to +50°C –

suffix code ‘LT’

4 Overvoltage Protection Modules – These

optional Overvoltage Protection Modules are

available for use with any power supply NOT

supplied with built-in OVP. Each is adjustable

from 6.4V to 34V and should be used when

maximum load protection is of prime

Single

Output

Dual

A/B/C/D 32901A

E

32901B

AA/BB/CC 32901A,

protects both outputs

32901B,

protects both outputs

Triple AA/AAA/D 32901A,

Output

E

Output

protects dual outputs

BBB/131 OVP built-in on 5V outputs

C/131/AAA 32901A, protects any output

Disk

Drive

BB

not supplied with built-in

OVP

importance. Response time is 1mS. Mounting

holes are provided on the chassis for these

modules, which mount within the specified

outline dimensions of each power supply.

A2

GENERAL DIMENSIONS

All dimensions are in mm

1

A Case

B Case

Weight: 0.9kg

Weight: 1.8kg

Mounting holes 4.77mm diameter

Fuse at: 0.5/0.25 Amps for 100-120/220-240 VAC

Mounting holes 4.77mm diameter

Fuse at: 1.0/0.5 Amps for 100-120/220-240 VAC

C Case

D Case

Weight: 2.7kg

Weight: 3.4kg

Mounting holes 4.77mm diameter

Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC

Mounting holes 4.77mm diameter

Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC

A3

E Case

AA Case

Weight: 4.5kg

Weight: 0.9kg

1

Mounting holes 4.77mm diameter

Fuse at: 3.0/1.5 Amps for 100-120/220-240 VAC

Mounting holes 4.77mm diameter

Fuse at: 0.5/0.25 Amps for 100-120/220-240 VAC

BB Case

CC Case

Weight: 1.8kg

Weight: 3.2kg

Mounting holes 4.77mm diameter

Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC

Mounting holes 4.77mm diameter

Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC

A4

AAA Case

BBB Case

Weight: 2.3kg

Weight: 3.6kg

1

Mounting holes 4.77mm diameter

Fuse at: 1.0/0.5 Amps for 100-120/220-240 VAC

Mounting holes 4.77mm diameter

Fuse at: 2.0/1.0 Amps for 100-120/220-240 VAC

DBB Case

DCC Case

Weight: 5.0kg

Weight: 5.5kg

Mounting holes 4.77mm diameter

Fuse at: 3.0/1.5 Amps for 100-120/220-240 VAC

Overvoltage Protection Modules

OVP–12

32901A

OVP–24

32901B

A5

A Cover

B Cover

1

124

143

C Cover

D Cover

225.5

175

E Cover

350

A6

Calex 33000 Series

2

AC/DC Unregulated Linear Power Supplies

These high quality unregulated linear

power supplies are suitable for a wide

range of applications where fully

regulated DC source is not required.

a

◆

Low cost

Suitable for many industrial

applications e.g. relays, solenoids,

DC motors etc.

◆

Universal input

3.75kV isolation safety transformer

Quality UK design and manufacture

SPECIFICATION

Input

115/230VAC 50/60Hz

D.C. Output

See Model Chart

Load Regulation

20% or 3V whichever is the greater for 20

to 100% load change

Output Ripple & Noise

1.5Vrms maximum

Output

Voltage

Volts

12

24

48

Output

Current

Model

Amps

10

20

5

10

20

5

33012A

33012B

33024A

33024B

33024C

33048B

Operating Temperature

0°C to +50°C

Isolation

Input to ground: 3750VAC min.

Input to output: 3750VAC min.

Output to ground: 500VAC min.

Safety

In accordance with EN60950 (Construction

uses safety bobbin approved to VDE 0551)

Overall Dimensions

l x w x h: 177.8 x 123.7 x <86.0mm

A7

Calex 41000 Series

3

DIN Rail Mounting Power Supplies for Instrumentation Applications

The 41000 Series range of power supplies

are designed for quick and trouble-free

installation onto 35mm profile DIN rails.

With outputs ranging from 5V to 24V and

maximum current capabilities from 100mA

to 500mA, these units are ideal for most

instrumentation and control systems.

Every model in the range is provided with

output current foldback limiting and is fully

short-circuit protected. Great attention has

been taken to usability and safety. A green

“supply on” LED is provided to clearly indicate

the presence of power, and link selection

allows the use of 110 or 230V supplies

without derating.

SPECIFICATION

Output

Voltage

Volts

5

12

15

Output

Current

mA

200

500

100

200

400

100

300

100

200

500

Input

Model

115VAC or 230VAC (±10%) link selectable

DC Output

See model chart

Ripple & Noise

less than 5mV rms.

Output Voltage Tolerance

±0.5% max.

Load Regulation

±0.2% for 50% load change

Line Regulation

±0.05% for 10% line change

Isolation: Input to output

3750VAC min.

41052

41055

41121

41122

41124

41151

41153

41241

41242

41245

24

Temperature Rating

Standard Range: 0°C to +50°C full-rated,

derated linearly to 40% at 70°C

Safety

In accordance with EN60950;

IEC950; UL1950; and CSA 22.2

Transformer

VDE 0551

Case Size

(l x w x h) 119.2 x 45 x 73.2mm

The case is rated to IP20

Case Material

Polycarbonate (self extinguishing to UL 94V-0)

A8

Calex 42000 Series

4

DIN Rail Mounting Linear Power Supplies

The 42000 Series DIN rail mounting power

supplies are supplied ready for connec-

tion. The unit has only to be snapped on

to the 35mm profile rail (DIN 46277-3) and

connected to the clearly marked terminal

screws. A status LED indicates power OK.

For increased power two or more units

may be connected in parallel. The output

of these units is fully protected against

short circuits and overload

SPECIFICATION

Input

110/220VAC 50/60Hz

DC Output

See model chart

Ripple & Noise

<5mV rms

Output Voltage Tolerance

±0.5% max.

Output

Voltage

Volts

12

15

24

Output

Current

Amps

1.0

2.0

1.0

2.0

1.0

2.0

4.0

Model

Case

42012A

42012A/2

42015A

42015A/2

42024A

A

B

42024A/2

42024B

Load Regulation

±0.2% for 50% load change

Line Regulation

±0.05% for 10% line change

Isolation: Input to output

3750Vac min.

Temperature Rating

Standard Range: 0°C to +50°C full-rated,

derated linearly to 40% at 70°C

Safety

In accordance with EN60950,

IEC 950, UL 1950 and CSA22.2

Transformer

VDE 0551

Case Size

‘A’ l x w x h 100 x 70 x 112mm

‘B’ l x w x h 150 x 72 x 112mm

The case is rated to IP20

Case Material

Polycarbonate (self extinguishing to UL 94V-0)

A9

Calex 42000 H & J Series

5

DIN Rail Mounting Switch Mode Power Supplies – 60 and 120 Watt

A range of high grade, low noise, regulated

switch mode power supplies designed to fit

standard 35mm DIN rail to BS5584:1978

(EN50 022, DIN 46277-3).

Front facing, clearly identified screw terminals

provide easy access for connection. Input of

either 110 or 230VAC can be used and the

range has a choice of output voltage and

current combinations. The DC output is fully

protected for short circuit and overload

conditions using pulse by pulse current

limiting.

◆

Inbuilt EMI filter, meets VDE curve B

Status LED indicates power OK

Compliant with relevant EU directives

Operating Temp

0 - 50°C (Derate linearly to 40%

of rated output at 70°C)

Dimensions (h x w x l)

SPECIFICATION

Input Voltage

93 - 132 & 187 - 264VAC

Frequency

73 x 100 x 118mm

47 - 63Hz

Case Material

DC Output

Polycarbonate (self extinguishing to UL 94V-0)

See model chart

Output Hold-up

20mS typ. at nominal line, full load

Output Voltage Tolerance

±0.5% max.

Output

Voltage

Volts

12

Output

Current

Amps

5

Model

Efficiency

42012H

42024H

42012J

42024J

>80% typ.

Load Regulation

1%

Line Regulation

±0.05% for 10% line change

Output Ripple

24

2.5

12

10

24

5

<50mV p-p

Short Circuit Protection

Electronic

Isolation

SELV to EN60 950

RFI

Class B

Safety

In accordance with EN60950; IEC950;

UL1950; and CSA 22.2

A10

Calex 44000 Series

6

DIN Rail Mounting Switch Mode Power Supplies – 240 and 480 Watt

A range of switch mode power supplies engineered

for ease of installation, efficient operation and

long term reliability.

The enclosure is a two part metal design. The

base consists of a robust but light weight aluminium

extrusion which combines rigidity and strength

with good thermal conductivity and forms the

DIN-rail mounting channel. The cover is made of

folded sheet steel and is ventilated to assist

thermal convection. Overall the enclosure also

provides exceptional RFI protection. The terminals

are heavy duty screw clamp connectors capable

of supporting identification markers.

◆

Pulse-by-pulse overcurrent/short circuit

protection

◆

Green LED to indicate power output OK

Ease of installation onto type T35 DIN-rail

Operating Temp

0 - 50°C (Derate linearly to 40%

SPECIFICATION

Input Voltage

of rated output at 70°C)

Dimensions (h x w x l)

107 x 167 x 107mm

Terminal Size

93 - 132 & 187 - 264VAC

Frequency

47 - 63Hz

DC Output

See model chart

Output Hold-up

20mS typ. at nominal line, full load

Output Voltage Tolerance

±0.5% max.

10mm²max cable

Output

Current

Amps

10

Model

Voltage

Volts

24

Efficiency

44024K

44024L

>85% typ.

Load Regulation

1%

24

10

Line Regulation

±0.05% for 10% line change

Output Ripple

<50mV p-p

Short Circuit Protection

Electronic

Isolation

SELV to EN60 950

RFI

Class B

Safety

In accordance with EN60950; IEC950;

UL1950; and CSA 22.2

A11

Calex Custom Power Supplies

7

Our flexible approach to manufacturing

and wide product range often enables us to

provide solutions which meet our customers’

specific power supply needs. If you have a

requirement which cannot be met by one of

our standard units do call us. Our team of

highly qualified and experienced engineers

will always be happy to discuss your

application with you and will try to put

forward a proposal that meets your budget.

The list below describes just some of the

custom power supplies we have developed

in the past.

4. Open frame linear power supply for

industrial application. 230 or 415VAC

input; 24VDC output.

1. 150W power supply in 1U high, 19” chassis.

Built for the telecommunications

industry. 230VAC input; 48VDC output.

5. 750W unit in 3U high, 19” chassis, to

power medical equipment. 230VAC

input; 48VDC output.

2. 120W power supply built to withstand

severe vibration. Military application.

115VAC, 60Hz input; 5, 8 and +/-12VDC

outputs.

6. Standby power supply for battery

powered instrument. 230VAC input;

1.5VDC output.

7. DIN rail mounted unit to energise strain

gauge bridge. 115/230VAC input;

+/-10VDC outputs.

3. Miniature encapsulated unit for the

automotive industry. Operates at

ambient temperatures as low as

-40°C.12VDC input; 7.2VDC, 600mA output.

A12

Other great power conversion products

available from Calex Electronics:

Eurocard AC/DC Switch

Mode Power Supplies and

DC/DC Converters

Modular AC/DC Switch

Mode Power Supplies and

DC/DC Converters

Encapsulated AC/DC Switch

Mode Power Supplies and

DC/DC Converters

ELECTRONICS LTD

PO Box 2

Distributed by:

Leighton Buzzard

Bedfordshire

England

LU7 8WZ

Tel: +44 (0)1525 373178

Fax: +44 (0)1525 851319

E-mail: calex@btinternet.com

Online: http://www.calex.co.uk


型号：	42012J
厂家：	ETC
描述：	PSU 12V 10A DIN RAIL 电源12V 10A DIN导轨\n
文件：	总16页 (文件大小：516K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

42012J [ETC]

相关型号：

4202-004LF

4202-037

4202-037LF

4202-045LF

4202-050LF

42020

42021-01C

42021-12A

42021-15A

42021-15C

42021-2A

42021-2C