3416-0100S [ETC]
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable; 专为IDC (绝缘位移连接器)与1.27mm间距扁平电缆连接型号: | 3416-0100S |
厂家: | ETC |
描述: | designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable |
文件: | 总9页 (文件大小:280K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
JNPS-0846
目 次 / CONTENTS
頁 / PAGE
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
機能·················································································································1
FUNCTION············································································································6
適合対象 ·········································································································1
COMPATIBLE OBJECTS ·····················································································6
関連仕様図 ·····································································································1
RELATED SPECIFICATION DRAWINGS ························································ 6
関連規格類 ·····································································································1
RELATED TEST STANDARDS ········································································· 6
適用·················································································································2
APPLICATION······································································································7
品質特性 ·······································································································3
QUALITY PERFORMANCE·················································································8
製品上めっき仕様識別表示 ··········································································4
PLATING SPEC INDICATION ON CONNECTOR··············································9
包装&表示 ·····································································································4
PACKAGE & IDENTIFICATION ·········································································9
保管·················································································································5
STORAGE············································································································10
注意事項 ·········································································································5
ATTENTIONS ·····································································································10
i
JNPS-0846
1. FUNCTION
This connector is designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch
flat cable. This connector has 2 rows of plural U-elements at topside and 2 rows of contact tails at
bottom side.
Then, this connector has the function of electrical connection between cable and PC board or cable and
compatible IC socket (Plating Suffix : SC or S).
2. COMPATIBLE OBJECTS
2-1 WIRE ACCOMODATION
28 AWG Stranded *corresponding with UL Style 2651
2-2 COMPATIBLE BOARD
Thickness: 1.6mm ± 0.2mm
Through hole diameter: φ1.0mm ± 0.1mm
* Refer to the drawing 4U-0010-0940-6.
* In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC
board by soldering, more than 0.5mm thickness spacers (ex. plastic washer with high temperature
resistance) should be used for spacing between the connector body and PC board.
2-3 COMPATIBLE IC SOCKET
IS socket should have the compatibility with the following specification of the terminals.
PRODUCT No.
LEAD LENGTH
LEAD SECTION
(X)3406-0000 XX (14Pos.) and
(X)3416-0000 XX (16Pos.)
4.4 ± 0.3mm
* These connectors don't have standoff bumps.
3.8 ± 0.3mm
* Lower side from the bottom of the standoff
bumps (Height: 0.6mm).
(X)3460-0000 XX (24Pos.)
(X)3508-0000 XX (40Pos.)
0.46 ± 0.05mm ×
0.36 ± 0.05mm
3.9 ± 0.3mm
* Lower side from the bottom of the standoff
bumps (Height: 0.5mm).
* IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S.
IC socket can not be used for (X)3XXX-0000 PR.
3. RELATED SPECIFICATION DRAWINGS
See the drawings described in JNPD-0846.
4. RELATED TEST STANDARDS
MIL-STD-202
JEIDA-38-1984
JIS C 0050
JNTM-0039, JNTM-0040
*JNTM: Test Method Standard of Sumitomo 3M for Electronic and Electrical Component Parts.
6
JNPS-0846
5. APPLICATION
PRODUCT NUMBER INFORMATION
(X) 3XXX – 0 X 0 0 XX
PLATING SUFFIX
PR : U-ELEMENT AREA & TAIL AREA / Gold Flash Plating
SC : U-ELEMENT AREA / Nickel Plating
TAIL AREA / Gold Plating 0.2µm Min
: U-ELEMENT AREA / Nickel Plating
TAIL AREA / Gold Plating 0.76µm Min.
S
SHAPE OF TAIL SECTION
0 : Rectangular Pin (0.46mm × 0.36mm)
CONTACT DISPOSITION
0 : Standard (Body Color : Gray)
1 : Mirror Image Type (Body Color : Black)
CONTACT QUANTITY
3406: 14P (Distance of terminal row : 7.62mm)
3416: 16P (Distance of terminal row : 7.62mm)
3460: 24P (Distance of terminal row : 15.24mm)
3508: 40P (Distance of terminal row : 15.24mm)
BODY COLOR
Blank : Gray
(Contact Disposition : Standard)
D
: Black (Contact Disposition : Mirror Image Type)
7
JNPS-0846
6. QUALITY PERFORMANCE
6-1 RATING
ITEM
RATING
CURRENT
VOLTAGE
TEMPERATURE
1.0A Max.
AC: 250V Max. / DC: 300V Max.
-55°C ~ 105°C
6-2 PHYSICAL SPECIFICATIONS
* The value in ( ) is reference.
RELATED
TEST
REQUIREMENT
TEST CONDITION
DESCRIPTION
STANDARD
Electrical discontinuity:
Less than 1µs
Sweep Freq.: 10∼55Hz, Amplitude:
1.52mm(or 98 m/s2), Sweep Cycle:
1min., Sweep time: 2 hours Sweep in
each direction: (X,Y,Z)
MIL-STD-
202F 101A
VIBRATION
Electrical discontinuity:
Less than 1µs
490 m/s2, 11ms, Half sine shock pulse.
3 times / X,Y,Z directions (Total 18
times)
MECHANICAL
SHOCK
MIL-STD-
202E 213B
Wetting: 95% Min.
or
Solder: Sn-3Ag-0.5Cu
- Wetting Measurement:
245°C, 3 seconds
JNTM-0039
JIS C 0050
SOLDERABILITY
Zero cross time:
3 seconds Max.
- Wetting Balance Method:
245°C
Dip soldering:
Connector should not have
any defect portions after test.
260°C, 10 seconds, 2 times or
263°C, 5 seconds, 2 times
* without Pre-heating
SOLDERING HEAT
RESISTANCE
JNTM-0040
Soldering Iron:
Dependence on soldering conditions.
* It need the evaluation
under actual conditions.
8
JNPS-0846
6-3 ELECTRICAL SPECIFICATIONS
TEST
RELATED
REQUIREMENT
DESCRIPTION
TEST CONDITION
STANDARD
No appearance of arcing
and break down.
Impressed voltage is AC 1000V rms.
between adjacent two contacts for one
minute.
DIELECTRIC
WITHSTANDING
VOLTAGE
――――
Leak current: 1mA Max.
INSULATION
RESIDENSE
Impressed voltage is DC 500V between
adjacent two contacts for one minute.
1000MΩ Min.
――――
- Initial /
Contact resistance is measured
at Short Circuit.
25 mΩ Max.
Current: 1.5mA
- Change of contact
resistance after
environmental tests /
20 mΩ Max.
Open Circuit Voltage: 20mV
by 4 terminal method.
CONTACT
* Measurement values include
the resistance of contact pins
as conductive material.
See Table 1.
RESISTANCE
* Refer to Table 1 regarding the conditions
of each environmental test.
Table 1: ENVIROMENTAL TEST
ITEM
TEST CONDITION
-10 ∼ 65°C, Relative Humidity 95% / 10 cycles
NaCl 5% solution, 35°C / 48 hours
RELATED STANDARD
MIL-STD-202F106D
MIL-STD-202F101D
MIL-STD-202F107G
MOISTURE
SALT SPRAY
THERMAL SHOCK
-55°C→25°C→85°C→25°C / 5 cycles
HUMIDITY
40°C, Relative Humidity 95% / 96 hours
MIL-STD-202F103B
(STEADY STATE)
THERMAL LIFE
H2S GAS
Steady Current: Current Rating × 110%, 85°C / 1000 hours
3 ± 1 ppm, 40°C, Relative Humidity 70 ∼ 80% / 96 hours
――――
JEIDA-38-1984
7. PLATING SPEC INDICATION ON CONNECTOR
The first letter, in stamped 3 letters on the connector body for lot numbering, identified the following
plating specs.
N XX or n XX : PR plating
C XX or c XX : SC plating
S XX or s XX : S plating
* XX : two alphabet letters
8. PACKAGE & IDENTIFICATION
These products are packed with plastic tray and carton box for transit.
Carton box are identified by part number, quantity, maker name and lot number.
9
JNPS-0846
9. STORAGE
This products shall be stored in a room, ambient temperature 5 ∼ 35°C, and ambient humidity
40 ∼ 70%.
10. ATTENTIONS
10-1 BOARD MOUNTING
In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC board
by soldering, more than 0.4mm thickness spacers (ex. plastic washer with high temperature resistance)
should be used for spacing between the connector body and PC board.
10-2 COMPATIBILITY WITH IC SOCKET
IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S.
IC socket can not be used for (X)3XXX-0000 PR.
10
相关型号:
3416-0100SC
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3416-3000
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3416-3002
designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable
ETC
3417-6
Board Connector, 40 Contact(s), 2 Row(s), Female, 0.1 inch Pitch, IDC Terminal, Locking, Gray Insulator, Socket, ROHS COMPLIANT
3M
©2020 ICPDF网 联系我们和版权申明